Import BSDDB 4.7.25 (as of svn r89086)

LICENSE

@@ -0,0 +1,130 @@
+/*-
+ * $Id: LICENSE,v 12.9 2008/02/07 17:12:17 mark Exp $
+ */
+
+The following is the license that applies to this copy of the Berkeley DB
+software.  For a license to use the Berkeley DB software under conditions
+other than those described here, or to purchase support for this software,
+please contact Oracle at berkeleydb-info_us@oracle.com.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+/*
+ * Copyright (c) 1990,2008 Oracle.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Redistributions in any form must be accompanied by information on
+ *    how to obtain complete source code for the DB software and any
+ *    accompanying software that uses the DB software.  The source code
+ *    must either be included in the distribution or be available for no
+ *    more than the cost of distribution plus a nominal fee, and must be
+ *    freely redistributable under reasonable conditions.  For an
+ *    executable file, complete source code means the source code for all
+ *    modules it contains.  It does not include source code for modules or
+ *    files that typically accompany the major components of the operating
+ *    system on which the executable file runs.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ORACLE ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT, ARE DISCLAIMED.  IN NO EVENT SHALL ORACLE BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+/*
+ * Copyright (c) 1995, 1996
+ *	The President and Fellows of Harvard University.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY HARVARD AND ITS CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL HARVARD OR ITS CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+/***
+ * ASM: a very small and fast Java bytecode manipulation framework
+ * Copyright (c) 2000-2005 INRIA, France Telecom
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */

README

@@ -0,0 +1,5 @@
+Berkeley DB 4.7.25: (May 15, 2008)
+
+This is version 4.7.25 of Berkeley DB from Oracle.  To view release and
+installation documentation, load the distribution file docs/index.html
+into your web browser.

README.md

@@ -1,6 +0,0 @@
-# cpython-source-deps
-Source for packages that the cpython build process depends on
-
-It is currently expected that this will only be useful on Windows,
-and in any case you should never need to clone this repository
-unless you are updating its contents.

btree/bt_compare.c

@@ -0,0 +1,213 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995, 1996
+ *	Keith Bostic.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Mike Olson.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: bt_compare.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+
+/*
+ * __bam_cmp --
+ *	Compare a key to a given record.
+ *
+ * PUBLIC: int __bam_cmp __P((DB *, DB_THREAD_INFO *,
+ * PUBLIC:    DB_TXN *, const DBT *, PAGE *, u_int32_t,
+ * PUBLIC:    int (*)(DB *, const DBT *, const DBT *), int *));
+ */
+int
+__bam_cmp(dbp, ip, txn, dbt, h, indx, func, cmpp)
+	DB *dbp;
+	DB_THREAD_INFO *ip;
+	DB_TXN *txn;
+	const DBT *dbt;
+	PAGE *h;
+	u_int32_t indx;
+	int (*func)__P((DB *, const DBT *, const DBT *));
+	int *cmpp;
+{
+	BINTERNAL *bi;
+	BKEYDATA *bk;
+	BOVERFLOW *bo;
+	DBT pg_dbt;
+
+	/*
+	 * Returns:
+	 *	< 0 if dbt is < page record
+	 *	= 0 if dbt is = page record
+	 *	> 0 if dbt is > page record
+	 *
+	 * !!!
+	 * We do not clear the pg_dbt DBT even though it's likely to contain
+	 * random bits.  That should be okay, because the app's comparison
+	 * routine had better not be looking at fields other than data, size
+	 * and app_data.  We don't clear it because we go through this path a
+	 * lot and it's expensive.
+	 */
+	switch (TYPE(h)) {
+	case P_LBTREE:
+	case P_LDUP:
+	case P_LRECNO:
+		bk = GET_BKEYDATA(dbp, h, indx);
+		if (B_TYPE(bk->type) == B_OVERFLOW)
+			bo = (BOVERFLOW *)bk;
+		else {
+			pg_dbt.app_data = NULL;
+			pg_dbt.data = bk->data;
+			pg_dbt.size = bk->len;
+			*cmpp = func(dbp, dbt, &pg_dbt);
+			return (0);
+		}
+		break;
+	case P_IBTREE:
+		/*
+		 * The following code guarantees that the left-most key on an
+		 * internal page at any place in the tree sorts less than any
+		 * user-specified key.  The reason is that if we have reached
+		 * this internal page, we know the user key must sort greater
+		 * than the key we're storing for this page in any internal
+		 * pages at levels above us in the tree.  It then follows that
+		 * any user-specified key cannot sort less than the first page
+		 * which we reference, and so there's no reason to call the
+		 * comparison routine.  While this may save us a comparison
+		 * routine call or two, the real reason for this is because
+		 * we don't maintain a copy of the smallest key in the tree,
+		 * so that we don't have to update all the levels of the tree
+		 * should the application store a new smallest key.  And, so,
+		 * we may not have a key to compare, which makes doing the
+		 * comparison difficult and error prone.
+		 */
+		if (indx == 0) {
+			*cmpp = 1;
+			return (0);
+		}
+
+		bi = GET_BINTERNAL(dbp, h, indx);
+		if (B_TYPE(bi->type) == B_OVERFLOW)
+			bo = (BOVERFLOW *)(bi->data);
+		else {
+			pg_dbt.app_data = NULL;
+			pg_dbt.data = bi->data;
+			pg_dbt.size = bi->len;
+			*cmpp = func(dbp, dbt, &pg_dbt);
+			return (0);
+		}
+		break;
+	default:
+		return (__db_pgfmt(dbp->env, PGNO(h)));
+	}
+
+	/*
+	 * Overflow.
+	 */
+	return (__db_moff(dbp, ip, txn, dbt,
+	    bo->pgno, bo->tlen, func == __bam_defcmp ? NULL : func, cmpp));
+}
+
+/*
+ * __bam_defcmp --
+ *	Default comparison routine.
+ *
+ * PUBLIC: int __bam_defcmp __P((DB *, const DBT *, const DBT *));
+ */
+int
+__bam_defcmp(dbp, a, b)
+	DB *dbp;
+	const DBT *a, *b;
+{
+	size_t len;
+	u_int8_t *p1, *p2;
+
+	COMPQUIET(dbp, NULL);
+
+	/*
+	 * Returns:
+	 *	< 0 if a is < b
+	 *	= 0 if a is = b
+	 *	> 0 if a is > b
+	 *
+	 * XXX
+	 * If a size_t doesn't fit into a long, or if the difference between
+	 * any two characters doesn't fit into an int, this routine can lose.
+	 * What we need is a signed integral type that's guaranteed to be at
+	 * least as large as a size_t, and there is no such thing.
+	 */
+	len = a->size > b->size ? b->size : a->size;
+	for (p1 = a->data, p2 = b->data; len--; ++p1, ++p2)
+		if (*p1 != *p2)
+			return ((long)*p1 - (long)*p2);
+	return ((long)a->size - (long)b->size);
+}
+
+/*
+ * __bam_defpfx --
+ *	Default prefix routine.
+ *
+ * PUBLIC: size_t __bam_defpfx __P((DB *, const DBT *, const DBT *));
+ */
+size_t
+__bam_defpfx(dbp, a, b)
+	DB *dbp;
+	const DBT *a, *b;
+{
+	size_t cnt, len;
+	u_int8_t *p1, *p2;
+
+	COMPQUIET(dbp, NULL);
+
+	cnt = 1;
+	len = a->size > b->size ? b->size : a->size;
+	for (p1 = a->data, p2 = b->data; len--; ++p1, ++p2, ++cnt)
+		if (*p1 != *p2)
+			return (cnt);
+
+	/*
+	 * They match up to the smaller of the two sizes.
+	 * Collate the longer after the shorter.
+	 */
+	if (a->size < b->size)
+		return (a->size + 1);
+	if (b->size < a->size)
+		return (b->size + 1);
+	return (b->size);
+}

btree/bt_conv.c

@@ -0,0 +1,95 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: bt_conv.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/db_swap.h"
+#include "dbinc/btree.h"
+
+/*
+ * __bam_pgin --
+ *	Convert host-specific page layout from the host-independent format
+ *	stored on disk.
+ *
+ * PUBLIC: int __bam_pgin __P((DB *, db_pgno_t, void *, DBT *));
+ */
+int
+__bam_pgin(dbp, pg, pp, cookie)
+	DB *dbp;
+	db_pgno_t pg;
+	void *pp;
+	DBT *cookie;
+{
+	DB_PGINFO *pginfo;
+	PAGE *h;
+
+	pginfo = (DB_PGINFO *)cookie->data;
+	if (!F_ISSET(pginfo, DB_AM_SWAP))
+		return (0);
+
+	h = pp;
+	return (TYPE(h) == P_BTREEMETA ?  __bam_mswap(dbp->env, pp) :
+	    __db_byteswap(dbp, pg, pp, pginfo->db_pagesize, 1));
+}
+
+/*
+ * __bam_pgout --
+ *	Convert host-specific page layout to the host-independent format
+ *	stored on disk.
+ *
+ * PUBLIC: int __bam_pgout __P((DB *, db_pgno_t, void *, DBT *));
+ */
+int
+__bam_pgout(dbp, pg, pp, cookie)
+	DB *dbp;
+	db_pgno_t pg;
+	void *pp;
+	DBT *cookie;
+{
+	DB_PGINFO *pginfo;
+	PAGE *h;
+
+	pginfo = (DB_PGINFO *)cookie->data;
+	if (!F_ISSET(pginfo, DB_AM_SWAP))
+		return (0);
+
+	h = pp;
+	return (TYPE(h) == P_BTREEMETA ?  __bam_mswap(dbp->env, pp) :
+	    __db_byteswap(dbp, pg, pp, pginfo->db_pagesize, 0));
+}
+
+/*
+ * __bam_mswap --
+ *	Swap the bytes on the btree metadata page.
+ *
+ * PUBLIC: int __bam_mswap __P((ENV *, PAGE *));
+ */
+int
+__bam_mswap(env, pg)
+	ENV *env;
+	PAGE *pg;
+{
+	u_int8_t *p;
+
+	COMPQUIET(env, NULL);
+
+	__db_metaswap(pg);
+	p = (u_int8_t *)pg + sizeof(DBMETA);
+
+	p += sizeof(u_int32_t);	/* unused */
+	SWAP32(p);		/* minkey */
+	SWAP32(p);		/* re_len */
+	SWAP32(p);		/* re_pad */
+	SWAP32(p);		/* root */
+	p += 92 * sizeof(u_int32_t); /* unused */
+	SWAP32(p);		/* crypto_magic */
+
+	return (0);
+}

btree/bt_curadj.c

@@ -0,0 +1,596 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: bt_curadj.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/mp.h"
+
+static int __bam_opd_cursor __P((DB *, DBC *, db_pgno_t, u_int32_t, u_int32_t));
+
+/*
+ * Cursor adjustments are logged if they are for subtransactions.  This is
+ * because it's possible for a subtransaction to adjust cursors which will
+ * still be active after the subtransaction aborts, and so which must be
+ * restored to their previous locations.  Cursors that can be both affected
+ * by our cursor adjustments and active after our transaction aborts can
+ * only be found in our parent transaction -- cursors in other transactions,
+ * including other child transactions of our parent, must have conflicting
+ * locker IDs, and so cannot be affected by adjustments in this transaction.
+ */
+
+/*
+ * __bam_ca_delete --
+ *	Update the cursors when items are deleted and when already deleted
+ *	items are overwritten.  Return the number of relevant cursors found.
+ *
+ * PUBLIC: int __bam_ca_delete __P((DB *, db_pgno_t, u_int32_t, int, int *));
+ */
+int
+__bam_ca_delete(dbp, pgno, indx, delete, countp)
+	DB *dbp;
+	db_pgno_t pgno;
+	u_int32_t indx;
+	int delete, *countp;
+{
+	BTREE_CURSOR *cp;
+	DB *ldbp;
+	DBC *dbc;
+	ENV *env;
+	int count;		/* !!!: Has to contain max number of cursors. */
+
+	env = dbp->env;
+
+	/*
+	 * Adjust the cursors.  We have the page write locked, so the
+	 * only other cursors that can be pointing at a page are
+	 * those in the same thread of control.  Unfortunately, we don't
+	 * know that they're using the same DB handle, so traverse
+	 * all matching DB handles in the same ENV, then all cursors
+	 * on each matching DB handle.
+	 *
+	 * Each cursor is single-threaded, so we only need to lock the
+	 * list of DBs and then the list of cursors in each DB.
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (count = 0;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			cp = (BTREE_CURSOR *)dbc->internal;
+			if (cp->pgno == pgno && cp->indx == indx &&
+			    !MVCC_SKIP_CURADJ(dbc, pgno)) {
+				/*
+				 * [#8032] This assert is checking
+				 * for possible race conditions where we
+				 * hold a cursor position without a lock.
+				 * Unfortunately, there are paths in the
+				 * Btree code that do not satisfy these
+				 * conditions. None of them are known to
+				 * be a problem, but this assert should
+				 * be re-activated when the Btree stack
+				 * code is re-written.
+				DB_ASSERT(env, !STD_LOCKING(dbc) ||
+				    cp->lock_mode != DB_LOCK_NG);
+				 */
+				if (delete)
+					F_SET(cp, C_DELETED);
+				else
+					F_CLR(cp, C_DELETED);
+				++count;
+			}
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	if (countp != NULL)
+		*countp = count;
+	return (0);
+}
+
+/*
+ * __ram_ca_delete --
+ *	Return if any relevant cursors found.
+ *
+ * PUBLIC: int __ram_ca_delete __P((DB *, db_pgno_t, int *));
+ */
+int
+__ram_ca_delete(dbp, root_pgno, foundp)
+	DB *dbp;
+	db_pgno_t root_pgno;
+	int *foundp;
+{
+	DB *ldbp;
+	DBC *dbc;
+	ENV *env;
+	int found;
+
+	env = dbp->env;
+
+	/*
+	 * Review the cursors.  See the comment in __bam_ca_delete().
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (found = 0;
+	    found == 0 && ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links)
+			if (dbc->internal->root == root_pgno &&
+			    !MVCC_SKIP_CURADJ(dbc, root_pgno)) {
+				found = 1;
+				break;
+			}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	*foundp = found;
+	return (0);
+}
+
+/*
+ * __bam_ca_di --
+ *	Adjust the cursors during a delete or insert.
+ *
+ * PUBLIC: int __bam_ca_di __P((DBC *, db_pgno_t, u_int32_t, int));
+ */
+int
+__bam_ca_di(my_dbc, pgno, indx, adjust)
+	DBC *my_dbc;
+	db_pgno_t pgno;
+	u_int32_t indx;
+	int adjust;
+{
+	DB *dbp, *ldbp;
+	DBC *dbc;
+	DBC_INTERNAL *cp;
+	DB_LSN lsn;
+	DB_TXN *my_txn;
+	ENV *env;
+	int found, ret;
+
+	dbp = my_dbc->dbp;
+	env = dbp->env;
+
+	my_txn = IS_SUBTRANSACTION(my_dbc->txn) ? my_dbc->txn : NULL;
+
+	/*
+	 * Adjust the cursors.  See the comment in __bam_ca_delete().
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (found = 0;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			if (dbc->dbtype == DB_RECNO)
+				continue;
+			cp = dbc->internal;
+			if (cp->pgno == pgno && cp->indx >= indx &&
+			    (dbc == my_dbc || !MVCC_SKIP_CURADJ(dbc, pgno))) {
+				/* Cursor indices should never be negative. */
+				DB_ASSERT(env, cp->indx != 0 || adjust > 0);
+				/* [#8032]
+				DB_ASSERT(env, !STD_LOCKING(dbc) ||
+				    cp->lock_mode != DB_LOCK_NG);
+				*/
+				cp->indx += adjust;
+				if (my_txn != NULL && dbc->txn != my_txn)
+					found = 1;
+			}
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	if (found != 0 && DBC_LOGGING(my_dbc)) {
+		if ((ret = __bam_curadj_log(dbp, my_dbc->txn, &lsn, 0,
+		    DB_CA_DI, pgno, 0, 0, (u_int32_t)adjust, indx, 0)) != 0)
+			return (ret);
+	}
+
+	return (0);
+}
+
+/*
+ * __bam_opd_cursor -- create a new opd cursor.
+ */
+static int
+__bam_opd_cursor(dbp, dbc, first, tpgno, ti)
+	DB *dbp;
+	DBC *dbc;
+	db_pgno_t tpgno;
+	u_int32_t first, ti;
+{
+	BTREE_CURSOR *cp, *orig_cp;
+	DBC *dbc_nopd;
+	int ret;
+
+	orig_cp = (BTREE_CURSOR *)dbc->internal;
+	dbc_nopd = NULL;
+
+	/*
+	 * Allocate a new cursor and create the stack.  If duplicates
+	 * are sorted, we've just created an off-page duplicate Btree.
+	 * If duplicates aren't sorted, we've just created a Recno tree.
+	 *
+	 * Note that in order to get here at all, there shouldn't be
+	 * an old off-page dup cursor--to augment the checking dbc_newopd
+	 * will do, assert this.
+	 */
+	DB_ASSERT(dbp->env, orig_cp->opd == NULL);
+	if ((ret = __dbc_newopd(dbc, tpgno, orig_cp->opd, &dbc_nopd)) != 0)
+		return (ret);
+
+	cp = (BTREE_CURSOR *)dbc_nopd->internal;
+	cp->pgno = tpgno;
+	cp->indx = ti;
+
+	if (dbp->dup_compare == NULL) {
+		/*
+		 * Converting to off-page Recno trees is tricky.  The
+		 * record number for the cursor is the index + 1 (to
+		 * convert to 1-based record numbers).
+		 */
+		cp->recno = ti + 1;
+	}
+
+	/*
+	 * Transfer the deleted flag from the top-level cursor to the
+	 * created one.
+	 */
+	if (F_ISSET(orig_cp, C_DELETED)) {
+		F_SET(cp, C_DELETED);
+		F_CLR(orig_cp, C_DELETED);
+	}
+
+	/* Stack the cursors and reset the initial cursor's index. */
+	orig_cp->opd = dbc_nopd;
+	orig_cp->indx = first;
+	return (0);
+}
+
+/*
+ * __bam_ca_dup --
+ *	Adjust the cursors when moving items from a leaf page to a duplicates
+ *	page.
+ *
+ * PUBLIC: int __bam_ca_dup __P((DBC *,
+ * PUBLIC:    u_int32_t, db_pgno_t, u_int32_t, db_pgno_t, u_int32_t));
+ */
+int
+__bam_ca_dup(my_dbc, first, fpgno, fi, tpgno, ti)
+	DBC *my_dbc;
+	db_pgno_t fpgno, tpgno;
+	u_int32_t first, fi, ti;
+{
+	BTREE_CURSOR *orig_cp;
+	DB *dbp, *ldbp;
+	DBC *dbc;
+	DB_LSN lsn;
+	DB_TXN *my_txn;
+	ENV *env;
+	int found, ret, t_ret;
+
+	dbp = my_dbc->dbp;
+	env = dbp->env;
+	my_txn = IS_SUBTRANSACTION(my_dbc->txn) ? my_dbc->txn : NULL;
+	ret = 0;
+
+	/*
+	 * Adjust the cursors.  See the comment in __bam_ca_delete().
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (found = 0;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+loop:		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			/* Find cursors pointing to this record. */
+			orig_cp = (BTREE_CURSOR *)dbc->internal;
+			if (orig_cp->pgno != fpgno || orig_cp->indx != fi ||
+			    MVCC_SKIP_CURADJ(dbc, fpgno))
+				continue;
+
+			/*
+			 * Since we rescan the list see if this is already
+			 * converted.
+			 */
+			if (orig_cp->opd != NULL)
+				continue;
+
+			MUTEX_UNLOCK(env, dbp->mutex);
+			/* [#8032]
+			DB_ASSERT(env, !STD_LOCKING(dbc) ||
+			    orig_cp->lock_mode != DB_LOCK_NG);
+			*/
+			if ((ret = __bam_opd_cursor(dbp,
+			    dbc, first, tpgno, ti)) != 0)
+				goto err;
+			if (my_txn != NULL && dbc->txn != my_txn)
+				found = 1;
+			/* We released the mutex to get a cursor, start over. */
+			goto loop;
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+err:	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	if (found != 0 && DBC_LOGGING(my_dbc)) {
+		if ((t_ret = __bam_curadj_log(dbp, my_dbc->txn,
+		    &lsn, 0, DB_CA_DUP, fpgno, tpgno, 0, first, fi, ti)) != 0 &&
+		    ret == 0)
+			ret = t_ret;
+	}
+
+	return (ret);
+}
+
+/*
+ * __bam_ca_undodup --
+ *	Adjust the cursors when returning items to a leaf page
+ *	from a duplicate page.
+ *	Called only during undo processing.
+ *
+ * PUBLIC: int __bam_ca_undodup __P((DB *,
+ * PUBLIC:    u_int32_t, db_pgno_t, u_int32_t, u_int32_t));
+ */
+int
+__bam_ca_undodup(dbp, first, fpgno, fi, ti)
+	DB *dbp;
+	db_pgno_t fpgno;
+	u_int32_t first, fi, ti;
+{
+	BTREE_CURSOR *orig_cp;
+	DB *ldbp;
+	DBC *dbc;
+	ENV *env;
+	int ret;
+
+	env = dbp->env;
+	ret = 0;
+
+	/*
+	 * Adjust the cursors.  See the comment in __bam_ca_delete().
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+loop:		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			orig_cp = (BTREE_CURSOR *)dbc->internal;
+
+			/*
+			 * A note on the orig_cp->opd != NULL requirement here:
+			 * it's possible that there's a cursor that refers to
+			 * the same duplicate set, but which has no opd cursor,
+			 * because it refers to a different item and we took
+			 * care of it while processing a previous record.
+			 */
+			if (orig_cp->pgno != fpgno ||
+			    orig_cp->indx != first ||
+			    orig_cp->opd == NULL || ((BTREE_CURSOR *)
+			    orig_cp->opd->internal)->indx != ti ||
+			    MVCC_SKIP_CURADJ(dbc, fpgno))
+				continue;
+			MUTEX_UNLOCK(env, dbp->mutex);
+			if ((ret = __dbc_close(orig_cp->opd)) != 0)
+				goto err;
+			orig_cp->opd = NULL;
+			orig_cp->indx = fi;
+			/*
+			 * We released the mutex to free a cursor,
+			 * start over.
+			 */
+			goto loop;
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+err:	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	return (ret);
+}
+
+/*
+ * __bam_ca_rsplit --
+ *	Adjust the cursors when doing reverse splits.
+ *
+ * PUBLIC: int __bam_ca_rsplit __P((DBC *, db_pgno_t, db_pgno_t));
+ */
+int
+__bam_ca_rsplit(my_dbc, fpgno, tpgno)
+	DBC* my_dbc;
+	db_pgno_t fpgno, tpgno;
+{
+	DB *dbp, *ldbp;
+	DBC *dbc;
+	DB_LSN lsn;
+	DB_TXN *my_txn;
+	ENV *env;
+	int found, ret;
+
+	dbp = my_dbc->dbp;
+	env = dbp->env;
+	my_txn = IS_SUBTRANSACTION(my_dbc->txn) ? my_dbc->txn : NULL;
+
+	/*
+	 * Adjust the cursors.  See the comment in __bam_ca_delete().
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (found = 0;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			if (dbc->dbtype == DB_RECNO)
+				continue;
+			if (dbc->internal->pgno == fpgno &&
+			    !MVCC_SKIP_CURADJ(dbc, fpgno)) {
+				dbc->internal->pgno = tpgno;
+				/* [#8032]
+				DB_ASSERT(env, !STD_LOCKING(dbc) ||
+				    dbc->internal->lock_mode != DB_LOCK_NG);
+				*/
+				if (my_txn != NULL && dbc->txn != my_txn)
+					found = 1;
+			}
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	if (found != 0 && DBC_LOGGING(my_dbc)) {
+		if ((ret = __bam_curadj_log(dbp, my_dbc->txn,
+		    &lsn, 0, DB_CA_RSPLIT, fpgno, tpgno, 0, 0, 0, 0)) != 0)
+			return (ret);
+	}
+	return (0);
+}
+
+/*
+ * __bam_ca_split --
+ *	Adjust the cursors when splitting a page.
+ *
+ * PUBLIC: int __bam_ca_split __P((DBC *,
+ * PUBLIC:    db_pgno_t, db_pgno_t, db_pgno_t, u_int32_t, int));
+ */
+int
+__bam_ca_split(my_dbc, ppgno, lpgno, rpgno, split_indx, cleft)
+	DBC *my_dbc;
+	db_pgno_t ppgno, lpgno, rpgno;
+	u_int32_t split_indx;
+	int cleft;
+{
+	DB *dbp, *ldbp;
+	DBC *dbc;
+	DBC_INTERNAL *cp;
+	DB_LSN lsn;
+	DB_TXN *my_txn;
+	ENV *env;
+	int found, ret;
+
+	dbp = my_dbc->dbp;
+	env = dbp->env;
+	my_txn = IS_SUBTRANSACTION(my_dbc->txn) ? my_dbc->txn : NULL;
+
+	/*
+	 * Adjust the cursors.  See the comment in __bam_ca_delete().
+	 *
+	 * If splitting the page that a cursor was on, the cursor has to be
+	 * adjusted to point to the same record as before the split.  Most
+	 * of the time we don't adjust pointers to the left page, because
+	 * we're going to copy its contents back over the original page.  If
+	 * the cursor is on the right page, it is decremented by the number of
+	 * records split to the left page.
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (found = 0;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			if (dbc->dbtype == DB_RECNO)
+				continue;
+			cp = dbc->internal;
+			if (cp->pgno == ppgno &&
+			    !MVCC_SKIP_CURADJ(dbc, ppgno)) {
+				/* [#8032]
+				DB_ASSERT(env, !STD_LOCKING(dbc) ||
+				    cp->lock_mode != DB_LOCK_NG);
+				*/
+				if (my_txn != NULL && dbc->txn != my_txn)
+					found = 1;
+				if (cp->indx < split_indx) {
+					if (cleft)
+						cp->pgno = lpgno;
+				} else {
+					cp->pgno = rpgno;
+					cp->indx -= split_indx;
+				}
+			}
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	if (found != 0 && DBC_LOGGING(my_dbc)) {
+		if ((ret = __bam_curadj_log(dbp,
+		    my_dbc->txn, &lsn, 0, DB_CA_SPLIT, ppgno, rpgno,
+		    cleft ? lpgno : PGNO_INVALID, 0, split_indx, 0)) != 0)
+			return (ret);
+	}
+
+	return (0);
+}
+
+/*
+ * __bam_ca_undosplit --
+ *	Adjust the cursors when undoing a split of a page.
+ *	If we grew a level we will execute this for both the
+ *	left and the right pages.
+ *	Called only during undo processing.
+ *
+ * PUBLIC: int __bam_ca_undosplit __P((DB *,
+ * PUBLIC:    db_pgno_t, db_pgno_t, db_pgno_t, u_int32_t));
+ */
+int
+__bam_ca_undosplit(dbp, frompgno, topgno, lpgno, split_indx)
+	DB *dbp;
+	db_pgno_t frompgno, topgno, lpgno;
+	u_int32_t split_indx;
+{
+	DB *ldbp;
+	DBC *dbc;
+	DBC_INTERNAL *cp;
+	ENV *env;
+
+	env = dbp->env;
+
+	/*
+	 * Adjust the cursors.  See the comment in __bam_ca_delete().
+	 *
+	 * When backing out a split, we move the cursor back
+	 * to the original offset and bump it by the split_indx.
+	 */
+	MUTEX_LOCK(env, env->mtx_dblist);
+	FIND_FIRST_DB_MATCH(env, dbp, ldbp);
+	for (;
+	    ldbp != NULL && ldbp->adj_fileid == dbp->adj_fileid;
+	    ldbp = TAILQ_NEXT(ldbp, dblistlinks)) {
+		MUTEX_LOCK(env, dbp->mutex);
+		TAILQ_FOREACH(dbc, &ldbp->active_queue, links) {
+			if (dbc->dbtype == DB_RECNO)
+				continue;
+			cp = dbc->internal;
+			if (cp->pgno == topgno &&
+			    !MVCC_SKIP_CURADJ(dbc, topgno)) {
+				cp->pgno = frompgno;
+				cp->indx += split_indx;
+			} else if (cp->pgno == lpgno &&
+			    !MVCC_SKIP_CURADJ(dbc, lpgno))
+				cp->pgno = frompgno;
+		}
+		MUTEX_UNLOCK(env, dbp->mutex);
+	}
+	MUTEX_UNLOCK(env, env->mtx_dblist);
+
+	return (0);
+}

btree/bt_delete.c

@@ -0,0 +1,644 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995, 1996
+ *	Keith Bostic.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Mike Olson.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: bt_delete.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/lock.h"
+#include "dbinc/mp.h"
+
+/*
+ * __bam_ditem --
+ *	Delete one or more entries from a page.
+ *
+ * PUBLIC: int __bam_ditem __P((DBC *, PAGE *, u_int32_t));
+ */
+int
+__bam_ditem(dbc, h, indx)
+	DBC *dbc;
+	PAGE *h;
+	u_int32_t indx;
+{
+	BINTERNAL *bi;
+	BKEYDATA *bk;
+	DB *dbp;
+	u_int32_t nbytes;
+	int ret;
+	db_indx_t *inp;
+
+	dbp = dbc->dbp;
+	inp = P_INP(dbp, h);
+
+	/* The page should already have been dirtied by our caller. */
+	DB_ASSERT(dbp->env, IS_DIRTY(h));
+
+	switch (TYPE(h)) {
+	case P_IBTREE:
+		bi = GET_BINTERNAL(dbp, h, indx);
+		switch (B_TYPE(bi->type)) {
+		case B_DUPLICATE:
+		case B_KEYDATA:
+			nbytes = BINTERNAL_SIZE(bi->len);
+			break;
+		case B_OVERFLOW:
+			nbytes = BINTERNAL_SIZE(bi->len);
+			if ((ret =
+			    __db_doff(dbc, ((BOVERFLOW *)bi->data)->pgno)) != 0)
+				return (ret);
+			break;
+		default:
+			return (__db_pgfmt(dbp->env, PGNO(h)));
+		}
+		break;
+	case P_IRECNO:
+		nbytes = RINTERNAL_SIZE;
+		break;
+	case P_LBTREE:
+		/*
+		 * If it's a duplicate key, discard the index and don't touch
+		 * the actual page item.
+		 *
+		 * !!!
+		 * This works because no data item can have an index matching
+		 * any other index so even if the data item is in a key "slot",
+		 * it won't match any other index.
+		 */
+		if ((indx % 2) == 0) {
+			/*
+			 * Check for a duplicate after us on the page.  NOTE:
+			 * we have to delete the key item before deleting the
+			 * data item, otherwise the "indx + P_INDX" calculation
+			 * won't work!
+			 */
+			if (indx + P_INDX < (u_int32_t)NUM_ENT(h) &&
+			    inp[indx] == inp[indx + P_INDX])
+				return (__bam_adjindx(dbc,
+				    h, indx, indx + O_INDX, 0));
+			/*
+			 * Check for a duplicate before us on the page.  It
+			 * doesn't matter if we delete the key item before or
+			 * after the data item for the purposes of this one.
+			 */
+			if (indx > 0 && inp[indx] == inp[indx - P_INDX])
+				return (__bam_adjindx(dbc,
+				    h, indx, indx - P_INDX, 0));
+		}
+		/* FALLTHROUGH */
+	case P_LDUP:
+	case P_LRECNO:
+		bk = GET_BKEYDATA(dbp, h, indx);
+		switch (B_TYPE(bk->type)) {
+		case B_DUPLICATE:
+			nbytes = BOVERFLOW_SIZE;
+			break;
+		case B_OVERFLOW:
+			nbytes = BOVERFLOW_SIZE;
+			if ((ret = __db_doff(
+			    dbc, (GET_BOVERFLOW(dbp, h, indx))->pgno)) != 0)
+				return (ret);
+			break;
+		case B_KEYDATA:
+			nbytes = BKEYDATA_SIZE(bk->len);
+			break;
+		default:
+			return (__db_pgfmt(dbp->env, PGNO(h)));
+		}
+		break;
+	default:
+		return (__db_pgfmt(dbp->env, PGNO(h)));
+	}
+
+	/* Delete the item and mark the page dirty. */
+	if ((ret = __db_ditem(dbc, h, indx, nbytes)) != 0)
+		return (ret);
+
+	return (0);
+}
+
+/*
+ * __bam_adjindx --
+ *	Adjust an index on the page.
+ *
+ * PUBLIC: int __bam_adjindx __P((DBC *, PAGE *, u_int32_t, u_int32_t, int));
+ */
+int
+__bam_adjindx(dbc, h, indx, indx_copy, is_insert)
+	DBC *dbc;
+	PAGE *h;
+	u_int32_t indx, indx_copy;
+	int is_insert;
+{
+	DB *dbp;
+	db_indx_t copy, *inp;
+	int ret;
+
+	dbp = dbc->dbp;
+	inp = P_INP(dbp, h);
+
+	/* Log the change. */
+	if (DBC_LOGGING(dbc)) {
+	    if ((ret = __bam_adj_log(dbp, dbc->txn, &LSN(h), 0,
+		PGNO(h), &LSN(h), indx, indx_copy, (u_int32_t)is_insert)) != 0)
+			return (ret);
+	} else
+		LSN_NOT_LOGGED(LSN(h));
+
+	/* Shuffle the indices and mark the page dirty. */
+	if (is_insert) {
+		copy = inp[indx_copy];
+		if (indx != NUM_ENT(h))
+			memmove(&inp[indx + O_INDX], &inp[indx],
+			    sizeof(db_indx_t) * (NUM_ENT(h) - indx));
+		inp[indx] = copy;
+		++NUM_ENT(h);
+	} else {
+		--NUM_ENT(h);
+		if (indx != NUM_ENT(h))
+			memmove(&inp[indx], &inp[indx + O_INDX],
+			    sizeof(db_indx_t) * (NUM_ENT(h) - indx));
+	}
+
+	return (0);
+}
+
+/*
+ * __bam_dpages --
+ *	Delete a set of locked pages.
+ *
+ * PUBLIC: int __bam_dpages __P((DBC *, int, int));
+ */
+int
+__bam_dpages(dbc, use_top, update)
+	DBC *dbc;
+	int use_top;
+	int update;
+{
+	BINTERNAL *bi;
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DBT a, b;
+	DB_LOCK c_lock, p_lock;
+	DB_MPOOLFILE *mpf;
+	EPG *epg, *save_sp, *stack_epg;
+	PAGE *child, *parent;
+	db_indx_t nitems;
+	db_pgno_t pgno, root_pgno;
+	db_recno_t rcnt;
+	int done, ret, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	nitems = 0;
+	pgno = PGNO_INVALID;
+
+	/*
+	 * We have the entire stack of deletable pages locked.
+	 *
+	 * Btree calls us with the first page in the stack is to have a
+	 * single item deleted, and the rest of the pages are to be removed.
+	 *
+	 * Recno always has a stack to the root and __bam_merge operations
+	 * may have unneeded items in the sack.  We find the lowest page
+	 * in the stack that has more than one record in it and start there.
+	 */
+	ret = 0;
+	if (use_top)
+		stack_epg = cp->sp;
+	else
+		for (stack_epg = cp->csp; stack_epg > cp->sp; --stack_epg)
+			if (NUM_ENT(stack_epg->page) > 1)
+				break;
+	epg = stack_epg;
+	/*
+	 * !!!
+	 * There is an interesting deadlock situation here.  We have to relink
+	 * the leaf page chain around the leaf page being deleted.  Consider
+	 * a cursor walking through the leaf pages, that has the previous page
+	 * read-locked and is waiting on a lock for the page we're deleting.
+	 * It will deadlock here.  Before we unlink the subtree, we relink the
+	 * leaf page chain.
+	 */
+	if (LEVEL(cp->csp->page) == 1 &&
+	    (ret = __bam_relink(dbc, cp->csp->page, PGNO_INVALID)) != 0)
+		goto discard;
+
+	/*
+	 * Delete the last item that references the underlying pages that are
+	 * to be deleted, and adjust cursors that reference that page.  Then,
+	 * save that page's page number and item count and release it.  If
+	 * the application isn't retaining locks because it's running without
+	 * transactions, this lets the rest of the tree get back to business
+	 * immediately.
+	 */
+	if ((ret = __memp_dirty(mpf,
+	    &epg->page, dbc->thread_info, dbc->txn, dbc->priority, 0)) != 0)
+		goto discard;
+	if ((ret = __bam_ditem(dbc, epg->page, epg->indx)) != 0)
+		goto discard;
+	if ((ret = __bam_ca_di(dbc, PGNO(epg->page), epg->indx, -1)) != 0)
+		goto discard;
+
+	if (update && epg->indx == 0) {
+		save_sp = cp->csp;
+		cp->csp = epg;
+		ret = __bam_pupdate(dbc, epg->page);
+		cp->csp = save_sp;
+		if (ret != 0)
+			goto discard;
+	}
+
+	pgno = PGNO(epg->page);
+	nitems = NUM_ENT(epg->page);
+
+	ret = __memp_fput(mpf, dbc->thread_info, epg->page, dbc->priority);
+	epg->page = NULL;
+	if ((t_ret = __TLPUT(dbc, epg->lock)) != 0 && ret == 0)
+		ret = t_ret;
+	if (ret != 0)
+		goto err_inc;
+
+	/* Then, discard any pages that we don't care about. */
+discard: for (epg = cp->sp; epg < stack_epg; ++epg) {
+		if ((t_ret = __memp_fput(mpf, dbc->thread_info,
+		     epg->page, dbc->priority)) != 0 && ret == 0)
+			ret = t_ret;
+		epg->page = NULL;
+		if ((t_ret = __TLPUT(dbc, epg->lock)) != 0 && ret == 0)
+			ret = t_ret;
+	}
+	if (ret != 0)
+		goto err;
+
+	/* Free the rest of the pages in the stack. */
+	while (++epg <= cp->csp) {
+		if ((ret = __memp_dirty(mpf, &epg->page,
+		    dbc->thread_info, dbc->txn, dbc->priority, 0)) != 0)
+			goto err;
+		/*
+		 * Delete page entries so they will be restored as part of
+		 * recovery.  We don't need to do cursor adjustment here as
+		 * the pages are being emptied by definition and so cannot
+		 * be referenced by a cursor.
+		 */
+		if (NUM_ENT(epg->page) != 0) {
+			DB_ASSERT(dbp->env, LEVEL(epg->page) != 1);
+
+			if ((ret = __bam_ditem(dbc, epg->page, epg->indx)) != 0)
+				goto err;
+			/*
+			 * Sheer paranoia: if we find any pages that aren't
+			 * emptied by the delete, someone else added an item
+			 * while we were walking the tree, and we discontinue
+			 * the delete.  Shouldn't be possible, but we check
+			 * regardless.
+			 */
+			if (NUM_ENT(epg->page) != 0)
+				goto err;
+		}
+
+		ret = __db_free(dbc, epg->page);
+		if (cp->page == epg->page)
+			cp->page = NULL;
+		epg->page = NULL;
+		if ((t_ret = __TLPUT(dbc, epg->lock)) != 0 && ret == 0)
+			ret = t_ret;
+		if (ret != 0)
+			goto err_inc;
+	}
+
+	if (0) {
+err_inc:	++epg;
+err:		for (; epg <= cp->csp; ++epg) {
+			if (epg->page != NULL) {
+				(void)__memp_fput(mpf, dbc->thread_info,
+				     epg->page, dbc->priority);
+				epg->page = NULL;
+			}
+			(void)__TLPUT(dbc, epg->lock);
+		}
+		BT_STK_CLR(cp);
+		return (ret);
+	}
+	BT_STK_CLR(cp);
+
+	/*
+	 * If we just deleted the next-to-last item from the root page, the
+	 * tree can collapse one or more levels.  While there remains only a
+	 * single item on the root page, write lock the last page referenced
+	 * by the root page and copy it over the root page.
+	 */
+	root_pgno = cp->root;
+	if (pgno != root_pgno || nitems != 1)
+		return (0);
+
+	for (done = 0; !done;) {
+		/* Initialize. */
+		parent = child = NULL;
+		LOCK_INIT(p_lock);
+		LOCK_INIT(c_lock);
+
+		/* Lock the root. */
+		pgno = root_pgno;
+		if ((ret =
+		    __db_lget(dbc, 0, pgno, DB_LOCK_WRITE, 0, &p_lock)) != 0)
+			goto stop;
+		if ((ret = __memp_fget(mpf, &pgno, dbc->thread_info, dbc->txn,
+		    DB_MPOOL_DIRTY, &parent)) != 0)
+			goto stop;
+
+		if (NUM_ENT(parent) != 1)
+			goto stop;
+
+		switch (TYPE(parent)) {
+		case P_IBTREE:
+			/*
+			 * If this is overflow, then try to delete it.
+			 * The child may or may not still point at it.
+			 */
+			bi = GET_BINTERNAL(dbp, parent, 0);
+			if (B_TYPE(bi->type) == B_OVERFLOW)
+				if ((ret = __db_doff(dbc,
+				    ((BOVERFLOW *)bi->data)->pgno)) != 0)
+					goto stop;
+			pgno = bi->pgno;
+			break;
+		case P_IRECNO:
+			pgno = GET_RINTERNAL(dbp, parent, 0)->pgno;
+			break;
+		default:
+			goto stop;
+		}
+
+		/* Lock the child page. */
+		if ((ret =
+		    __db_lget(dbc, 0, pgno, DB_LOCK_WRITE, 0, &c_lock)) != 0)
+			goto stop;
+		if ((ret = __memp_fget(mpf, &pgno, dbc->thread_info, dbc->txn,
+		    DB_MPOOL_DIRTY, &child)) != 0)
+			goto stop;
+
+		/* Log the change. */
+		if (DBC_LOGGING(dbc)) {
+			memset(&a, 0, sizeof(a));
+			a.data = child;
+			a.size = dbp->pgsize;
+			memset(&b, 0, sizeof(b));
+			b.data = P_ENTRY(dbp, parent, 0);
+			b.size = TYPE(parent) == P_IRECNO ? RINTERNAL_SIZE :
+			    BINTERNAL_SIZE(((BINTERNAL *)b.data)->len);
+			if ((ret = __bam_rsplit_log(dbp, dbc->txn,
+			    &child->lsn, 0, PGNO(child), &a, PGNO(parent),
+			    RE_NREC(parent), &b, &parent->lsn)) != 0)
+				goto stop;
+		} else
+			LSN_NOT_LOGGED(child->lsn);
+
+		/*
+		 * Make the switch.
+		 *
+		 * One fixup -- internal pages below the top level do not store
+		 * a record count, so we have to preserve it if we're not
+		 * converting to a leaf page.  Note also that we are about to
+		 * overwrite the parent page, including its LSN.  This is OK
+		 * because the log message we wrote describing this update
+		 * stores its LSN on the child page.  When the child is copied
+		 * onto the parent, the correct LSN is copied into place.
+		 */
+		COMPQUIET(rcnt, 0);
+		if (F_ISSET(cp, C_RECNUM) && LEVEL(child) > LEAFLEVEL)
+			rcnt = RE_NREC(parent);
+		memcpy(parent, child, dbp->pgsize);
+		PGNO(parent) = root_pgno;
+		if (F_ISSET(cp, C_RECNUM) && LEVEL(child) > LEAFLEVEL)
+			RE_NREC_SET(parent, rcnt);
+
+		/* Adjust the cursors. */
+		if ((ret = __bam_ca_rsplit(dbc, PGNO(child), root_pgno)) != 0)
+			goto stop;
+
+		/*
+		 * Free the page copied onto the root page and discard its
+		 * lock.  (The call to __db_free() discards our reference
+		 * to the page.)
+		 */
+		if ((ret = __db_free(dbc, child)) != 0) {
+			child = NULL;
+			goto stop;
+		}
+		child = NULL;
+
+		if (0) {
+stop:			done = 1;
+		}
+		if ((t_ret = __TLPUT(dbc, p_lock)) != 0 && ret == 0)
+			ret = t_ret;
+		if (parent != NULL &&
+		    (t_ret = __memp_fput(mpf, dbc->thread_info,
+		    parent, dbc->priority)) != 0 && ret == 0)
+			ret = t_ret;
+		if ((t_ret = __TLPUT(dbc, c_lock)) != 0 && ret == 0)
+			ret = t_ret;
+		if (child != NULL &&
+		    (t_ret = __memp_fput(mpf, dbc->thread_info,
+		    child, dbc->priority)) != 0 && ret == 0)
+			ret = t_ret;
+	}
+
+	return (ret);
+}
+
+/*
+ * __bam_relink --
+ *	Relink around a deleted page.
+ *
+ * PUBLIC: int __bam_relink __P((DBC *, PAGE *, db_pgno_t));
+ */
+int
+__bam_relink(dbc, pagep, new_pgno)
+	DBC *dbc;
+	PAGE *pagep;
+	db_pgno_t new_pgno;
+{
+	DB *dbp;
+	DB_LOCK npl, ppl;
+	DB_LSN *nlsnp, *plsnp, ret_lsn;
+	DB_MPOOLFILE *mpf;
+	PAGE *np, *pp;
+	int ret, t_ret;
+
+	dbp = dbc->dbp;
+	np = pp = NULL;
+	LOCK_INIT(npl);
+	LOCK_INIT(ppl);
+	nlsnp = plsnp = NULL;
+	mpf = dbp->mpf;
+	ret = 0;
+
+	/*
+	 * Retrieve and lock the one/two pages.  For a remove, we may need
+	 * two pages (the before and after).  For an add, we only need one
+	 * because, the split took care of the prev.
+	 */
+	if (pagep->next_pgno != PGNO_INVALID) {
+		if ((ret = __db_lget(dbc,
+		    0, pagep->next_pgno, DB_LOCK_WRITE, 0, &npl)) != 0)
+			goto err;
+		if ((ret = __memp_fget(mpf, &pagep->next_pgno,
+		    dbc->thread_info, dbc->txn, DB_MPOOL_DIRTY, &np)) != 0) {
+			ret = __db_pgerr(dbp, pagep->next_pgno, ret);
+			goto err;
+		}
+		nlsnp = &np->lsn;
+	}
+	if (pagep->prev_pgno != PGNO_INVALID) {
+		if ((ret = __db_lget(dbc,
+		    0, pagep->prev_pgno, DB_LOCK_WRITE, 0, &ppl)) != 0)
+			goto err;
+		if ((ret = __memp_fget(mpf, &pagep->prev_pgno,
+		    dbc->thread_info, dbc->txn, DB_MPOOL_DIRTY, &pp)) != 0) {
+			ret = __db_pgerr(dbp, pagep->prev_pgno, ret);
+			goto err;
+		}
+		plsnp = &pp->lsn;
+	}
+
+	/* Log the change. */
+	if (DBC_LOGGING(dbc)) {
+		if ((ret = __bam_relink_log(dbp, dbc->txn, &ret_lsn, 0,
+		    pagep->pgno, new_pgno, pagep->prev_pgno, plsnp,
+		    pagep->next_pgno, nlsnp)) != 0)
+			goto err;
+	} else
+		LSN_NOT_LOGGED(ret_lsn);
+	if (np != NULL)
+		np->lsn = ret_lsn;
+	if (pp != NULL)
+		pp->lsn = ret_lsn;
+
+	/*
+	 * Modify and release the two pages.
+	 */
+	if (np != NULL) {
+		if (new_pgno == PGNO_INVALID)
+			np->prev_pgno = pagep->prev_pgno;
+		else
+			np->prev_pgno = new_pgno;
+		ret = __memp_fput(mpf, dbc->thread_info, np, dbc->priority);
+		if ((t_ret = __TLPUT(dbc, npl)) != 0 && ret == 0)
+			ret = t_ret;
+		if (ret != 0)
+			goto err;
+	}
+
+	if (pp != NULL) {
+		if (new_pgno == PGNO_INVALID)
+			pp->next_pgno = pagep->next_pgno;
+		else
+			pp->next_pgno = new_pgno;
+		ret = __memp_fput(mpf, dbc->thread_info, pp, dbc->priority);
+		if ((t_ret = __TLPUT(dbc, ppl)) != 0 && ret == 0)
+			ret = t_ret;
+		if (ret != 0)
+			goto err;
+	}
+	return (0);
+
+err:	if (np != NULL)
+		(void)__memp_fput(mpf, dbc->thread_info, np, dbc->priority);
+	(void)__TLPUT(dbc, npl);
+	if (pp != NULL)
+		(void)__memp_fput(mpf, dbc->thread_info, pp, dbc->priority);
+	(void)__TLPUT(dbc, ppl);
+	return (ret);
+}
+
+/*
+ * __bam_pupdate --
+ *	Update parent key pointers up the tree.
+ *
+ * PUBLIC: int __bam_pupdate __P((DBC *, PAGE *));
+ */
+int
+__bam_pupdate(dbc, lpg)
+	DBC *dbc;
+	PAGE *lpg;
+{
+	BTREE_CURSOR *cp;
+	ENV *env;
+	EPG *epg;
+	int ret;
+
+	env = dbc->env;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	ret = 0;
+
+	/*
+	 * Update the parents up the tree.  __bam_pinsert only looks at the
+	 * left child if is a leaf page, so we don't need to change it.  We
+	 * just do a delete and insert; a replace is possible but reusing
+	 * pinsert is better.
+	 */
+	for (epg = &cp->csp[-1]; epg >= cp->sp; epg--) {
+		if ((ret = __memp_dirty(dbc->dbp->mpf, &epg->page,
+		    dbc->thread_info, dbc->txn, dbc->priority, 0)) != 0)
+			return (ret);
+		if ((ret = __bam_ditem(dbc, epg->page, epg->indx)) != 0)
+			return (ret);
+		epg->indx--;
+		if ((ret = __bam_pinsert(dbc, epg, 0,
+		    lpg, epg[1].page, BPI_NORECNUM)) != 0) {
+			if (ret == DB_NEEDSPLIT) {
+				/* This should not happen. */
+				__db_errx(env,
+				     "Not enough room in parent: %s: page %lu",
+				     dbc->dbp->fname, (u_long)PGNO(epg->page));
+				ret = __env_panic(env, EINVAL);
+			}
+			return (ret);
+		}
+	}
+	return (ret);
+}

btree/bt_method.c

@@ -0,0 +1,509 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1999,2008 Oracle.  All rights reserved.
+ *
+ * $Id: bt_method.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/qam.h"
+
+static int __bam_set_bt_minkey __P((DB *, u_int32_t));
+static int __bam_set_bt_prefix
+	       __P((DB *, size_t(*)(DB *, const DBT *, const DBT *)));
+static int __ram_get_re_delim __P((DB *, int *));
+static int __ram_set_re_delim __P((DB *, int));
+static int __ram_set_re_len __P((DB *, u_int32_t));
+static int __ram_set_re_pad __P((DB *, int));
+static int __ram_get_re_source __P((DB *, const char **));
+static int __ram_set_re_source __P((DB *, const char *));
+
+/*
+ * __bam_db_create --
+ *	Btree specific initialization of the DB structure.
+ *
+ * PUBLIC: int __bam_db_create __P((DB *));
+ */
+int
+__bam_db_create(dbp)
+	DB *dbp;
+{
+	BTREE *t;
+	int ret;
+
+	/* Allocate and initialize the private btree structure. */
+	if ((ret = __os_calloc(dbp->env, 1, sizeof(BTREE), &t)) != 0)
+		return (ret);
+	dbp->bt_internal = t;
+
+	t->bt_minkey = DEFMINKEYPAGE;		/* Btree */
+	t->bt_compare = __bam_defcmp;
+	t->bt_prefix = __bam_defpfx;
+
+	dbp->set_bt_compare = __bam_set_bt_compare;
+	dbp->get_bt_minkey = __bam_get_bt_minkey;
+	dbp->set_bt_minkey = __bam_set_bt_minkey;
+	dbp->set_bt_prefix = __bam_set_bt_prefix;
+
+	t->re_pad = ' ';			/* Recno */
+	t->re_delim = '\n';
+	t->re_eof = 1;
+
+	dbp->get_re_delim = __ram_get_re_delim;
+	dbp->set_re_delim = __ram_set_re_delim;
+	dbp->get_re_len = __ram_get_re_len;
+	dbp->set_re_len = __ram_set_re_len;
+	dbp->get_re_pad = __ram_get_re_pad;
+	dbp->set_re_pad = __ram_set_re_pad;
+	dbp->get_re_source = __ram_get_re_source;
+	dbp->set_re_source = __ram_set_re_source;
+
+	return (0);
+}
+
+/*
+ * __bam_db_close --
+ *	Btree specific discard of the DB structure.
+ *
+ * PUBLIC: int __bam_db_close __P((DB *));
+ */
+int
+__bam_db_close(dbp)
+	DB *dbp;
+{
+	BTREE *t;
+
+	if ((t = dbp->bt_internal) == NULL)
+		return (0);
+						/* Recno */
+	/* Close any backing source file descriptor. */
+	if (t->re_fp != NULL)
+		(void)fclose(t->re_fp);
+
+	/* Free any backing source file name. */
+	if (t->re_source != NULL)
+		__os_free(dbp->env, t->re_source);
+
+	__os_free(dbp->env, t);
+	dbp->bt_internal = NULL;
+
+	return (0);
+}
+
+/*
+ * __bam_map_flags --
+ *	Map Btree specific flags from public to the internal values.
+ *
+ * PUBLIC: void __bam_map_flags __P((DB *, u_int32_t *, u_int32_t *));
+ */
+void
+__bam_map_flags(dbp, inflagsp, outflagsp)
+	DB *dbp;
+	u_int32_t *inflagsp, *outflagsp;
+{
+	COMPQUIET(dbp, NULL);
+
+	if (FLD_ISSET(*inflagsp, DB_DUP)) {
+		FLD_SET(*outflagsp, DB_AM_DUP);
+		FLD_CLR(*inflagsp, DB_DUP);
+	}
+	if (FLD_ISSET(*inflagsp, DB_DUPSORT)) {
+		FLD_SET(*outflagsp, DB_AM_DUP | DB_AM_DUPSORT);
+		FLD_CLR(*inflagsp, DB_DUPSORT);
+	}
+	if (FLD_ISSET(*inflagsp, DB_RECNUM)) {
+		FLD_SET(*outflagsp, DB_AM_RECNUM);
+		FLD_CLR(*inflagsp, DB_RECNUM);
+	}
+	if (FLD_ISSET(*inflagsp, DB_REVSPLITOFF)) {
+		FLD_SET(*outflagsp, DB_AM_REVSPLITOFF);
+		FLD_CLR(*inflagsp, DB_REVSPLITOFF);
+	}
+}
+
+/*
+ * __bam_set_flags --
+ *	Set Btree specific flags.
+ *
+ * PUBLIC: int __bam_set_flags __P((DB *, u_int32_t *flagsp));
+ */
+int
+__bam_set_flags(dbp, flagsp)
+	DB *dbp;
+	u_int32_t *flagsp;
+{
+	u_int32_t flags;
+
+	flags = *flagsp;
+	if (LF_ISSET(DB_DUP | DB_DUPSORT | DB_RECNUM | DB_REVSPLITOFF))
+		DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_flags");
+
+	/*
+	 * The DB_DUP and DB_DUPSORT flags are shared by the Hash
+	 * and Btree access methods.
+	 */
+	if (LF_ISSET(DB_DUP | DB_DUPSORT))
+		DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE | DB_OK_HASH);
+
+	if (LF_ISSET(DB_RECNUM | DB_REVSPLITOFF))
+		DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE);
+
+	/* DB_DUP/DB_DUPSORT is incompatible with DB_RECNUM. */
+	if (LF_ISSET(DB_DUP | DB_DUPSORT) && F_ISSET(dbp, DB_AM_RECNUM))
+		goto incompat;
+
+	/* DB_RECNUM is incompatible with DB_DUP/DB_DUPSORT. */
+	if (LF_ISSET(DB_RECNUM) && F_ISSET(dbp, DB_AM_DUP))
+		goto incompat;
+
+	if (LF_ISSET(DB_DUPSORT) && dbp->dup_compare == NULL)
+		dbp->dup_compare = __bam_defcmp;
+
+	__bam_map_flags(dbp, flagsp, &dbp->flags);
+	return (0);
+
+incompat:
+	return (__db_ferr(dbp->env, "DB->set_flags", 1));
+}
+
+/*
+ * __bam_set_bt_compare --
+ *	Set the comparison function.
+ *
+ * PUBLIC: int __bam_set_bt_compare
+ * PUBLIC:         __P((DB *, int (*)(DB *, const DBT *, const DBT *)));
+ */
+int
+__bam_set_bt_compare(dbp, func)
+	DB *dbp;
+	int (*func) __P((DB *, const DBT *, const DBT *));
+{
+	BTREE *t;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_bt_compare");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE);
+
+	t = dbp->bt_internal;
+
+	/*
+	 * Can't default the prefix routine if the user supplies a comparison
+	 * routine; shortening the keys can break their comparison algorithm.
+	 */
+	t->bt_compare = func;
+	if (t->bt_prefix == __bam_defpfx)
+		t->bt_prefix = NULL;
+
+	return (0);
+}
+
+/*
+ * __db_get_bt_minkey --
+ *	Get the minimum keys per page.
+ *
+ * PUBLIC: int __bam_get_bt_minkey __P((DB *, u_int32_t *));
+ */
+int
+__bam_get_bt_minkey(dbp, bt_minkeyp)
+	DB *dbp;
+	u_int32_t *bt_minkeyp;
+{
+	BTREE *t;
+
+	DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE);
+
+	t = dbp->bt_internal;
+	*bt_minkeyp = t->bt_minkey;
+	return (0);
+}
+
+/*
+ * __bam_set_bt_minkey --
+ *	Set the minimum keys per page.
+ */
+static int
+__bam_set_bt_minkey(dbp, bt_minkey)
+	DB *dbp;
+	u_int32_t bt_minkey;
+{
+	BTREE *t;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_bt_minkey");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE);
+
+	t = dbp->bt_internal;
+
+	if (bt_minkey < 2) {
+		__db_errx(dbp->env, "minimum bt_minkey value is 2");
+		return (EINVAL);
+	}
+
+	t->bt_minkey = bt_minkey;
+	return (0);
+}
+
+/*
+ * __bam_set_bt_prefix --
+ *	Set the prefix function.
+ */
+static int
+__bam_set_bt_prefix(dbp, func)
+	DB *dbp;
+	size_t (*func) __P((DB *, const DBT *, const DBT *));
+{
+	BTREE *t;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_bt_prefix");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE);
+
+	t = dbp->bt_internal;
+
+	t->bt_prefix = func;
+	return (0);
+}
+
+/*
+ * __ram_map_flags --
+ *	Map Recno specific flags from public to the internal values.
+ *
+ * PUBLIC: void __ram_map_flags __P((DB *, u_int32_t *, u_int32_t *));
+ */
+void
+__ram_map_flags(dbp, inflagsp, outflagsp)
+	DB *dbp;
+	u_int32_t *inflagsp, *outflagsp;
+{
+	COMPQUIET(dbp, NULL);
+
+	if (FLD_ISSET(*inflagsp, DB_RENUMBER)) {
+		FLD_SET(*outflagsp, DB_AM_RENUMBER);
+		FLD_CLR(*inflagsp, DB_RENUMBER);
+	}
+	if (FLD_ISSET(*inflagsp, DB_SNAPSHOT)) {
+		FLD_SET(*outflagsp, DB_AM_SNAPSHOT);
+		FLD_CLR(*inflagsp, DB_SNAPSHOT);
+	}
+}
+
+/*
+ * __ram_set_flags --
+ *	Set Recno specific flags.
+ *
+ * PUBLIC: int __ram_set_flags __P((DB *, u_int32_t *flagsp));
+ */
+int
+__ram_set_flags(dbp, flagsp)
+	DB *dbp;
+	u_int32_t *flagsp;
+{
+	u_int32_t flags;
+
+	flags = *flagsp;
+	if (LF_ISSET(DB_RENUMBER | DB_SNAPSHOT)) {
+		DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_flags");
+		DB_ILLEGAL_METHOD(dbp, DB_OK_RECNO);
+	}
+
+	__ram_map_flags(dbp, flagsp, &dbp->flags);
+	return (0);
+}
+
+/*
+ * __db_get_re_delim --
+ *	Get the variable-length input record delimiter.
+ */
+static int
+__ram_get_re_delim(dbp, re_delimp)
+	DB *dbp;
+	int *re_delimp;
+{
+	BTREE *t;
+
+	DB_ILLEGAL_METHOD(dbp, DB_OK_RECNO);
+	t = dbp->bt_internal;
+	*re_delimp = t->re_delim;
+	return (0);
+}
+
+/*
+ * __ram_set_re_delim --
+ *	Set the variable-length input record delimiter.
+ */
+static int
+__ram_set_re_delim(dbp, re_delim)
+	DB *dbp;
+	int re_delim;
+{
+	BTREE *t;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_re_delim");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_RECNO);
+
+	t = dbp->bt_internal;
+
+	t->re_delim = re_delim;
+	F_SET(dbp, DB_AM_DELIMITER);
+
+	return (0);
+}
+
+/*
+ * __db_get_re_len --
+ *	Get the variable-length input record length.
+ *
+ * PUBLIC: int __ram_get_re_len __P((DB *, u_int32_t *));
+ */
+int
+__ram_get_re_len(dbp, re_lenp)
+	DB *dbp;
+	u_int32_t *re_lenp;
+{
+	BTREE *t;
+	QUEUE *q;
+
+	DB_ILLEGAL_METHOD(dbp, DB_OK_QUEUE | DB_OK_RECNO);
+
+	/*
+	 * This has to work for all access methods, before or after opening the
+	 * database.  When the record length is set with __ram_set_re_len, the
+	 * value in both the BTREE and QUEUE structs will be correct.
+	 * Otherwise, this only makes sense after the database in opened, in
+	 * which case we know the type.
+	 */
+	if (dbp->type == DB_QUEUE) {
+		q = dbp->q_internal;
+		*re_lenp = q->re_len;
+	} else {
+		t = dbp->bt_internal;
+		*re_lenp = t->re_len;
+	}
+
+	return (0);
+}
+
+/*
+ * __ram_set_re_len --
+ *	Set the variable-length input record length.
+ */
+static int
+__ram_set_re_len(dbp, re_len)
+	DB *dbp;
+	u_int32_t re_len;
+{
+	BTREE *t;
+	QUEUE *q;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_re_len");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_QUEUE | DB_OK_RECNO);
+
+	t = dbp->bt_internal;
+	t->re_len = re_len;
+
+	q = dbp->q_internal;
+	q->re_len = re_len;
+
+	F_SET(dbp, DB_AM_FIXEDLEN);
+
+	return (0);
+}
+
+/*
+ * __db_get_re_pad --
+ *	Get the fixed-length record pad character.
+ *
+ * PUBLIC: int __ram_get_re_pad __P((DB *, int *));
+ */
+int
+__ram_get_re_pad(dbp, re_padp)
+	DB *dbp;
+	int *re_padp;
+{
+	BTREE *t;
+	QUEUE *q;
+
+	DB_ILLEGAL_METHOD(dbp, DB_OK_QUEUE | DB_OK_RECNO);
+
+	/*
+	 * This has to work for all access methods, before or after opening the
+	 * database.  When the record length is set with __ram_set_re_pad, the
+	 * value in both the BTREE and QUEUE structs will be correct.
+	 * Otherwise, this only makes sense after the database in opened, in
+	 * which case we know the type.
+	 */
+	if (dbp->type == DB_QUEUE) {
+		q = dbp->q_internal;
+		*re_padp = q->re_pad;
+	} else {
+		t = dbp->bt_internal;
+		*re_padp = t->re_pad;
+	}
+
+	return (0);
+}
+
+/*
+ * __ram_set_re_pad --
+ *	Set the fixed-length record pad character.
+ */
+static int
+__ram_set_re_pad(dbp, re_pad)
+	DB *dbp;
+	int re_pad;
+{
+	BTREE *t;
+	QUEUE *q;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_re_pad");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_QUEUE | DB_OK_RECNO);
+
+	t = dbp->bt_internal;
+	t->re_pad = re_pad;
+
+	q = dbp->q_internal;
+	q->re_pad = re_pad;
+
+	F_SET(dbp, DB_AM_PAD);
+
+	return (0);
+}
+
+/*
+ * __db_get_re_source --
+ *	Get the backing source file name.
+ */
+static int
+__ram_get_re_source(dbp, re_sourcep)
+	DB *dbp;
+	const char **re_sourcep;
+{
+	BTREE *t;
+
+	DB_ILLEGAL_METHOD(dbp, DB_OK_RECNO);
+
+	t = dbp->bt_internal;
+	*re_sourcep = t->re_source;
+	return (0);
+}
+
+/*
+ * __ram_set_re_source --
+ *	Set the backing source file name.
+ */
+static int
+__ram_set_re_source(dbp, re_source)
+	DB *dbp;
+	const char *re_source;
+{
+	BTREE *t;
+
+	DB_ILLEGAL_AFTER_OPEN(dbp, "DB->set_re_source");
+	DB_ILLEGAL_METHOD(dbp, DB_OK_RECNO);
+
+	t = dbp->bt_internal;
+
+	return (__os_strdup(dbp->env, re_source, &t->re_source));
+}

btree/bt_open.c

@@ -0,0 +1,621 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995, 1996
+ *	Keith Bostic.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Mike Olson.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: bt_open.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/crypto.h"
+#include "dbinc/db_page.h"
+#include "dbinc/db_swap.h"
+#include "dbinc/btree.h"
+#include "dbinc/lock.h"
+#include "dbinc/log.h"
+#include "dbinc/mp.h"
+#include "dbinc/fop.h"
+
+static void __bam_init_meta __P((DB *, BTMETA *, db_pgno_t, DB_LSN *));
+
+/*
+ * __bam_open --
+ *	Open a btree.
+ *
+ * PUBLIC: int __bam_open __P((DB *, DB_THREAD_INFO *,
+ * PUBLIC:      DB_TXN *, const char *, db_pgno_t, u_int32_t));
+ */
+int
+__bam_open(dbp, ip, txn, name, base_pgno, flags)
+	DB *dbp;
+	DB_THREAD_INFO *ip;
+	DB_TXN *txn;
+	const char *name;
+	db_pgno_t base_pgno;
+	u_int32_t flags;
+{
+	BTREE *t;
+
+	COMPQUIET(name, NULL);
+	t = dbp->bt_internal;
+
+	/*
+	 * We don't permit the user to specify a prefix routine if they didn't
+	 * also specify a comparison routine, they can't know enough about our
+	 * comparison routine to get it right.
+	 */
+	if (t->bt_compare == __bam_defcmp && t->bt_prefix != __bam_defpfx) {
+		__db_errx(dbp->env,
+"prefix comparison may not be specified for default comparison routine");
+		return (EINVAL);
+	}
+
+	/*
+	 * Verify that the bt_minkey value specified won't cause the
+	 * calculation of ovflsize to underflow [#2406] for this pagesize.
+	 */
+	if (B_MINKEY_TO_OVFLSIZE(dbp, t->bt_minkey, dbp->pgsize) >
+	    B_MINKEY_TO_OVFLSIZE(dbp, DEFMINKEYPAGE, dbp->pgsize)) {
+		__db_errx(dbp->env,
+		    "bt_minkey value of %lu too high for page size of %lu",
+		    (u_long)t->bt_minkey, (u_long)dbp->pgsize);
+		return (EINVAL);
+	}
+
+	/* Start up the tree. */
+	return (__bam_read_root(dbp, ip, txn, base_pgno, flags));
+}
+
+/*
+ * __bam_metachk --
+ *
+ * PUBLIC: int __bam_metachk __P((DB *, const char *, BTMETA *));
+ */
+int
+__bam_metachk(dbp, name, btm)
+	DB *dbp;
+	const char *name;
+	BTMETA *btm;
+{
+	ENV *env;
+	u_int32_t vers;
+	int ret;
+
+	env = dbp->env;
+
+	/*
+	 * At this point, all we know is that the magic number is for a Btree.
+	 * Check the version, the database may be out of date.
+	 */
+	vers = btm->dbmeta.version;
+	if (F_ISSET(dbp, DB_AM_SWAP))
+		M_32_SWAP(vers);
+	switch (vers) {
+	case 6:
+	case 7:
+		__db_errx(env,
+		    "%s: btree version %lu requires a version upgrade",
+		    name, (u_long)vers);
+		return (DB_OLD_VERSION);
+	case 8:
+	case 9:
+		break;
+	default:
+		__db_errx(env,
+		    "%s: unsupported btree version: %lu", name, (u_long)vers);
+		return (EINVAL);
+	}
+
+	/* Swap the page if we need to. */
+	if (F_ISSET(dbp, DB_AM_SWAP) &&
+	    (ret = __bam_mswap(env, (PAGE *)btm)) != 0)
+		return (ret);
+
+	/*
+	 * Check application info against metadata info, and set info, flags,
+	 * and type based on metadata info.
+	 */
+	if ((ret =
+	    __db_fchk(env, "DB->open", btm->dbmeta.flags, BTM_MASK)) != 0)
+		return (ret);
+
+	if (F_ISSET(&btm->dbmeta, BTM_RECNO)) {
+		if (dbp->type == DB_BTREE)
+			goto wrong_type;
+		dbp->type = DB_RECNO;
+		DB_ILLEGAL_METHOD(dbp, DB_OK_RECNO);
+	} else {
+		if (dbp->type == DB_RECNO)
+			goto wrong_type;
+		dbp->type = DB_BTREE;
+		DB_ILLEGAL_METHOD(dbp, DB_OK_BTREE);
+	}
+
+	if (F_ISSET(&btm->dbmeta, BTM_DUP))
+		F_SET(dbp, DB_AM_DUP);
+	else
+		if (F_ISSET(dbp, DB_AM_DUP)) {
+			__db_errx(env,
+		"%s: DB_DUP specified to open method but not set in database",
+			    name);
+			return (EINVAL);
+		}
+
+	if (F_ISSET(&btm->dbmeta, BTM_RECNUM)) {
+		if (dbp->type != DB_BTREE)
+			goto wrong_type;
+		F_SET(dbp, DB_AM_RECNUM);
+
+		if ((ret = __db_fcchk(env,
+		    "DB->open", dbp->flags, DB_AM_DUP, DB_AM_RECNUM)) != 0)
+			return (ret);
+	} else
+		if (F_ISSET(dbp, DB_AM_RECNUM)) {
+			__db_errx(env,
+	    "%s: DB_RECNUM specified to open method but not set in database",
+			    name);
+			return (EINVAL);
+		}
+
+	if (F_ISSET(&btm->dbmeta, BTM_FIXEDLEN)) {
+		if (dbp->type != DB_RECNO)
+			goto wrong_type;
+		F_SET(dbp, DB_AM_FIXEDLEN);
+	} else
+		if (F_ISSET(dbp, DB_AM_FIXEDLEN)) {
+			__db_errx(env,
+	"%s: DB_FIXEDLEN specified to open method but not set in database",
+			    name);
+			return (EINVAL);
+		}
+
+	if (F_ISSET(&btm->dbmeta, BTM_RENUMBER)) {
+		if (dbp->type != DB_RECNO)
+			goto wrong_type;
+		F_SET(dbp, DB_AM_RENUMBER);
+	} else
+		if (F_ISSET(dbp, DB_AM_RENUMBER)) {
+			__db_errx(env,
+	    "%s: DB_RENUMBER specified to open method but not set in database",
+			    name);
+			return (EINVAL);
+		}
+
+	if (F_ISSET(&btm->dbmeta, BTM_SUBDB))
+		F_SET(dbp, DB_AM_SUBDB);
+	else
+		if (F_ISSET(dbp, DB_AM_SUBDB)) {
+			__db_errx(env,
+	    "%s: multiple databases specified but not supported by file",
+			    name);
+			return (EINVAL);
+		}
+
+	if (F_ISSET(&btm->dbmeta, BTM_DUPSORT)) {
+		if (dbp->dup_compare == NULL)
+			dbp->dup_compare = __bam_defcmp;
+		F_SET(dbp, DB_AM_DUPSORT);
+	} else
+		if (dbp->dup_compare != NULL) {
+			__db_errx(env,
+		"%s: duplicate sort specified but not supported in database",
+			    name);
+			return (EINVAL);
+		}
+
+	/* Set the page size. */
+	dbp->pgsize = btm->dbmeta.pagesize;
+
+	/* Copy the file's ID. */
+	memcpy(dbp->fileid, btm->dbmeta.uid, DB_FILE_ID_LEN);
+
+	return (0);
+
+wrong_type:
+	if (dbp->type == DB_BTREE)
+		__db_errx(env,
+		    "open method type is Btree, database type is Recno");
+	else
+		__db_errx(env,
+		    "open method type is Recno, database type is Btree");
+	return (EINVAL);
+}
+
+/*
+ * __bam_read_root --
+ *	Read the root page and check a tree.
+ *
+ * PUBLIC: int __bam_read_root __P((DB *,
+ * PUBLIC:      DB_THREAD_INFO *, DB_TXN *, db_pgno_t, u_int32_t));
+ */
+int
+__bam_read_root(dbp, ip, txn, base_pgno, flags)
+	DB *dbp;
+	DB_THREAD_INFO *ip;
+	DB_TXN *txn;
+	db_pgno_t base_pgno;
+	u_int32_t flags;
+{
+	BTMETA *meta;
+	BTREE *t;
+	DBC *dbc;
+	DB_LOCK metalock;
+	DB_MPOOLFILE *mpf;
+	int ret, t_ret;
+
+	COMPQUIET(flags, 0);
+
+	meta = NULL;
+	t = dbp->bt_internal;
+	LOCK_INIT(metalock);
+	mpf = dbp->mpf;
+	ret = 0;
+
+	/* Get a cursor.  */
+	if ((ret = __db_cursor(dbp, ip, txn, &dbc, 0)) != 0)
+		return (ret);
+
+	/* Get the metadata page. */
+	if ((ret =
+	    __db_lget(dbc, 0, base_pgno, DB_LOCK_READ, 0, &metalock)) != 0)
+		goto err;
+	if ((ret = __memp_fget(mpf, &base_pgno, ip, dbc->txn, 0, &meta)) != 0)
+		goto err;
+
+	/*
+	 * If the magic number is set, the tree has been created.  Correct
+	 * any fields that may not be right.  Note, all of the local flags
+	 * were set by DB->open.
+	 *
+	 * Otherwise, we'd better be in recovery or abort, in which case the
+	 * metadata page will be created/initialized elsewhere.
+	 */
+	if (meta->dbmeta.magic == DB_BTREEMAGIC) {
+		t->bt_minkey = meta->minkey;
+		t->re_pad = (int)meta->re_pad;
+		t->re_len = meta->re_len;
+
+		t->bt_meta = base_pgno;
+		t->bt_root = meta->root;
+		if (PGNO(meta) == PGNO_BASE_MD && !F_ISSET(dbp, DB_AM_RECOVER))
+			__memp_set_last_pgno(mpf, meta->dbmeta.last_pgno);
+	} else {
+		DB_ASSERT(dbp->env,
+		    IS_RECOVERING(dbp->env) || F_ISSET(dbp, DB_AM_RECOVER));
+	}
+
+	/*
+	 * !!!
+	 * If creating a subdatabase, we've already done an insert when
+	 * we put the subdatabase's entry into the master database, so
+	 * our last-page-inserted value is wrongly initialized for the
+	 * master database, not the subdatabase we're creating.  I'm not
+	 * sure where the *right* place to clear this value is, it's not
+	 * intuitively obvious that it belongs here.
+	 */
+	t->bt_lpgno = PGNO_INVALID;
+
+err:	/* Put the metadata page back. */
+	if (meta != NULL && (t_ret = __memp_fput(mpf,
+	    ip, meta, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+	if ((t_ret = __LPUT(dbc, metalock)) != 0 && ret == 0)
+		ret = t_ret;
+
+	if ((t_ret = __dbc_close(dbc)) != 0 && ret == 0)
+		ret = t_ret;
+	return (ret);
+}
+
+/*
+ * __bam_init_meta --
+ *
+ * Initialize a btree meta-data page.  The following fields may need
+ * to be updated later: last_pgno, root.
+ */
+static void
+__bam_init_meta(dbp, meta, pgno, lsnp)
+	DB *dbp;
+	BTMETA *meta;
+	db_pgno_t pgno;
+	DB_LSN *lsnp;
+{
+	BTREE *t;
+	ENV *env;
+
+	env = dbp->env;
+	t = dbp->bt_internal;
+
+	memset(meta, 0, sizeof(BTMETA));
+	meta->dbmeta.lsn = *lsnp;
+	meta->dbmeta.pgno = pgno;
+	meta->dbmeta.magic = DB_BTREEMAGIC;
+	meta->dbmeta.version = DB_BTREEVERSION;
+	meta->dbmeta.pagesize = dbp->pgsize;
+	if (F_ISSET(dbp, DB_AM_CHKSUM))
+		FLD_SET(meta->dbmeta.metaflags, DBMETA_CHKSUM);
+	if (F_ISSET(dbp, DB_AM_ENCRYPT)) {
+		meta->dbmeta.encrypt_alg = env->crypto_handle->alg;
+		DB_ASSERT(env, meta->dbmeta.encrypt_alg != 0);
+		meta->crypto_magic = meta->dbmeta.magic;
+	}
+	meta->dbmeta.type = P_BTREEMETA;
+	meta->dbmeta.free = PGNO_INVALID;
+	meta->dbmeta.last_pgno = pgno;
+	if (F_ISSET(dbp, DB_AM_DUP))
+		F_SET(&meta->dbmeta, BTM_DUP);
+	if (F_ISSET(dbp, DB_AM_FIXEDLEN))
+		F_SET(&meta->dbmeta, BTM_FIXEDLEN);
+	if (F_ISSET(dbp, DB_AM_RECNUM))
+		F_SET(&meta->dbmeta, BTM_RECNUM);
+	if (F_ISSET(dbp, DB_AM_RENUMBER))
+		F_SET(&meta->dbmeta, BTM_RENUMBER);
+	if (F_ISSET(dbp, DB_AM_SUBDB))
+		F_SET(&meta->dbmeta, BTM_SUBDB);
+	if (dbp->dup_compare != NULL)
+		F_SET(&meta->dbmeta, BTM_DUPSORT);
+	if (dbp->type == DB_RECNO)
+		F_SET(&meta->dbmeta, BTM_RECNO);
+	memcpy(meta->dbmeta.uid, dbp->fileid, DB_FILE_ID_LEN);
+
+	meta->minkey = t->bt_minkey;
+	meta->re_len = t->re_len;
+	meta->re_pad = (u_int32_t)t->re_pad;
+}
+
+/*
+ * __bam_new_file --
+ * Create the necessary pages to begin a new database file.
+ *
+ * This code appears more complex than it is because of the two cases (named
+ * and unnamed).  The way to read the code is that for each page being created,
+ * there are three parts: 1) a "get page" chunk (which either uses malloc'd
+ * memory or calls __memp_fget), 2) the initialization, and 3) the "put page"
+ * chunk which either does a fop write or an __memp_fput.
+ *
+ * PUBLIC: int __bam_new_file __P((DB *,
+ * PUBLIC:      DB_THREAD_INFO *, DB_TXN *, DB_FH *, const char *));
+ */
+int
+__bam_new_file(dbp, ip, txn, fhp, name)
+	DB *dbp;
+	DB_THREAD_INFO *ip;
+	DB_TXN *txn;
+	DB_FH *fhp;
+	const char *name;
+{
+	BTMETA *meta;
+	DBT pdbt;
+	DB_LSN lsn;
+	DB_MPOOLFILE *mpf;
+	DB_PGINFO pginfo;
+	ENV *env;
+	PAGE *root;
+	db_pgno_t pgno;
+	int ret, t_ret;
+	void *buf;
+
+	env = dbp->env;
+	mpf = dbp->mpf;
+	root = NULL;
+	meta = NULL;
+	buf = NULL;
+
+	if (F_ISSET(dbp, DB_AM_INMEM)) {
+		/* Build the meta-data page. */
+		pgno = PGNO_BASE_MD;
+		if ((ret = __memp_fget(mpf, &pgno, ip, txn,
+		    DB_MPOOL_CREATE | DB_MPOOL_DIRTY, &meta)) != 0)
+			return (ret);
+		LSN_NOT_LOGGED(lsn);
+		__bam_init_meta(dbp, meta, PGNO_BASE_MD, &lsn);
+		meta->root = 1;
+		meta->dbmeta.last_pgno = 1;
+		if ((ret =
+		    __db_log_page(dbp, txn, &lsn, pgno, (PAGE *)meta)) != 0)
+			goto err;
+		ret = __memp_fput(mpf, ip, meta, dbp->priority);
+		meta = NULL;
+		if (ret != 0)
+			goto err;
+
+		/* Build the root page. */
+		pgno = 1;
+		if ((ret = __memp_fget(mpf, &pgno,
+		    ip, txn, DB_MPOOL_CREATE, &root)) != 0)
+			goto err;
+		P_INIT(root, dbp->pgsize, 1, PGNO_INVALID, PGNO_INVALID,
+		    LEAFLEVEL, dbp->type == DB_RECNO ? P_LRECNO : P_LBTREE);
+		LSN_NOT_LOGGED(root->lsn);
+		if ((ret =
+		    __db_log_page(dbp, txn, &root->lsn, pgno, root)) != 0)
+			goto err;
+		ret = __memp_fput(mpf, ip, root, dbp->priority);
+		root = NULL;
+		if (ret != 0)
+			goto err;
+	} else {
+		memset(&pdbt, 0, sizeof(pdbt));
+
+		/* Build the meta-data page. */
+		pginfo.db_pagesize = dbp->pgsize;
+		pginfo.flags =
+		    F_ISSET(dbp, (DB_AM_CHKSUM | DB_AM_ENCRYPT | DB_AM_SWAP));
+		pginfo.type = dbp->type;
+		pdbt.data = &pginfo;
+		pdbt.size = sizeof(pginfo);
+		if ((ret = __os_calloc(env, 1, dbp->pgsize, &buf)) != 0)
+			return (ret);
+		meta = (BTMETA *)buf;
+		LSN_NOT_LOGGED(lsn);
+		__bam_init_meta(dbp, meta, PGNO_BASE_MD, &lsn);
+		meta->root = 1;
+		meta->dbmeta.last_pgno = 1;
+		if ((ret = __db_pgout(
+		    dbp->dbenv, PGNO_BASE_MD, meta, &pdbt)) != 0)
+			goto err;
+		if ((ret = __fop_write(env, txn, name, DB_APP_DATA, fhp,
+		    dbp->pgsize, 0, 0, buf, dbp->pgsize, 1, F_ISSET(
+		    dbp, DB_AM_NOT_DURABLE) ? DB_LOG_NOT_DURABLE : 0)) != 0)
+			goto err;
+		meta = NULL;
+
+		/* Build the root page. */
+#ifdef DIAGNOSTIC
+		memset(buf, CLEAR_BYTE, dbp->pgsize);
+#endif
+		root = (PAGE *)buf;
+		P_INIT(root, dbp->pgsize, 1, PGNO_INVALID, PGNO_INVALID,
+		    LEAFLEVEL, dbp->type == DB_RECNO ? P_LRECNO : P_LBTREE);
+		LSN_NOT_LOGGED(root->lsn);
+		if ((ret =
+		    __db_pgout(dbp->dbenv, root->pgno, root, &pdbt)) != 0)
+			goto err;
+		if ((ret = __fop_write(env, txn, name, DB_APP_DATA, fhp,
+		    dbp->pgsize, 1, 0, buf, dbp->pgsize, 1, F_ISSET(
+		    dbp, DB_AM_NOT_DURABLE) ? DB_LOG_NOT_DURABLE : 0)) != 0)
+			goto err;
+		root = NULL;
+	}
+
+err:	if (buf != NULL)
+		__os_free(env, buf);
+	else {
+		if (meta != NULL &&
+		    (t_ret = __memp_fput(mpf, ip,
+		    meta, dbp->priority)) != 0 && ret == 0)
+			ret = t_ret;
+		if (root != NULL &&
+		    (t_ret = __memp_fput(mpf, ip,
+		    root, dbp->priority)) != 0 && ret == 0)
+			ret = t_ret;
+	}
+	return (ret);
+}
+
+/*
+ * __bam_new_subdb --
+ *	Create a metadata page and a root page for a new btree.
+ *
+ * PUBLIC: int __bam_new_subdb __P((DB *, DB *, DB_THREAD_INFO *, DB_TXN *));
+ */
+int
+__bam_new_subdb(mdbp, dbp, ip, txn)
+	DB *mdbp, *dbp;
+	DB_THREAD_INFO *ip;
+	DB_TXN *txn;
+{
+	BTMETA *meta;
+	DBC *dbc;
+	DB_LOCK metalock;
+	DB_LSN lsn;
+	DB_MPOOLFILE *mpf;
+	ENV *env;
+	PAGE *root;
+	int ret, t_ret;
+
+	env = mdbp->env;
+	mpf = mdbp->mpf;
+	dbc = NULL;
+	meta = NULL;
+	root = NULL;
+
+	if ((ret = __db_cursor(mdbp, ip, txn,
+	    &dbc, CDB_LOCKING(env) ?  DB_WRITECURSOR : 0)) != 0)
+		return (ret);
+
+	/* Get, and optionally create the metadata page. */
+	if ((ret = __db_lget(dbc,
+	    0, dbp->meta_pgno, DB_LOCK_WRITE, 0, &metalock)) != 0)
+		goto err;
+	if ((ret = __memp_fget(mpf, &dbp->meta_pgno,
+	    ip, txn, DB_MPOOL_CREATE, &meta)) != 0)
+		goto err;
+
+	/* Build meta-data page. */
+	lsn = meta->dbmeta.lsn;
+	__bam_init_meta(dbp, meta, dbp->meta_pgno, &lsn);
+	if ((ret = __db_log_page(mdbp,
+	    txn, &meta->dbmeta.lsn, dbp->meta_pgno, (PAGE *)meta)) != 0)
+		goto err;
+
+	/* Create and initialize a root page. */
+	if ((ret = __db_new(dbc,
+	    dbp->type == DB_RECNO ? P_LRECNO : P_LBTREE, &root)) != 0)
+		goto err;
+	root->level = LEAFLEVEL;
+
+	if (DBENV_LOGGING(env) &&
+#if !defined(DEBUG_WOP)
+	    txn != NULL &&
+#endif
+
+	    (ret = __bam_root_log(mdbp, txn, &meta->dbmeta.lsn, 0,
+	    meta->dbmeta.pgno, root->pgno, &meta->dbmeta.lsn)) != 0)
+		goto err;
+
+	meta->root = root->pgno;
+	if ((ret =
+	    __db_log_page(mdbp, txn, &root->lsn, root->pgno, root)) != 0)
+		goto err;
+
+	/* Release the metadata and root pages. */
+	if ((ret = __memp_fput(mpf, ip, meta, dbc->priority)) != 0)
+		goto err;
+	meta = NULL;
+	if ((ret = __memp_fput(mpf, ip, root, dbc->priority)) != 0)
+		goto err;
+	root = NULL;
+err:
+	if (meta != NULL)
+		if ((t_ret = __memp_fput(mpf, ip,
+		meta, dbc->priority)) != 0 && ret == 0)
+			ret = t_ret;
+	if (root != NULL)
+		if ((t_ret = __memp_fput(mpf, ip,
+		root, dbc->priority)) != 0 && ret == 0)
+			ret = t_ret;
+	if ((t_ret = __LPUT(dbc, metalock)) != 0 && ret == 0)
+		ret = t_ret;
+	if (dbc != NULL)
+		if ((t_ret = __dbc_close(dbc)) != 0 && ret == 0)
+			ret = t_ret;
+	return (ret);
+}

btree/bt_put.c

@@ -0,0 +1,916 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995, 1996
+ *	Keith Bostic.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Mike Olson.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: bt_put.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/mp.h"
+
+static int __bam_build
+	       __P((DBC *, u_int32_t, DBT *, PAGE *, u_int32_t, u_int32_t));
+static int __bam_dup_check __P((DBC *, u_int32_t,
+		PAGE *, u_int32_t, u_int32_t, db_indx_t *));
+static int __bam_dup_convert __P((DBC *, PAGE *, u_int32_t, u_int32_t));
+static int __bam_ovput
+	       __P((DBC *, u_int32_t, db_pgno_t, PAGE *, u_int32_t, DBT *));
+static u_int32_t
+	   __bam_partsize __P((DB *, u_int32_t, DBT *, PAGE *, u_int32_t));
+
+/*
+ * __bam_iitem --
+ *	Insert an item into the tree.
+ *
+ * PUBLIC: int __bam_iitem __P((DBC *, DBT *, DBT *, u_int32_t, u_int32_t));
+ */
+int
+__bam_iitem(dbc, key, data, op, flags)
+	DBC *dbc;
+	DBT *key, *data;
+	u_int32_t op, flags;
+{
+	BKEYDATA *bk, bk_tmp;
+	BTREE *t;
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DBT bk_hdr, tdbt;
+	DB_MPOOLFILE *mpf;
+	ENV *env;
+	PAGE *h;
+	db_indx_t cnt, indx;
+	u_int32_t data_size, have_bytes, need_bytes, needed, pages, pagespace;
+	int cmp, bigkey, bigdata, del, dupadjust;
+	int padrec, replace, ret, t_ret, was_deleted;
+
+	COMPQUIET(cnt, 0);
+
+	dbp = dbc->dbp;
+	env = dbp->env;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	t = dbp->bt_internal;
+	h = cp->page;
+	indx = cp->indx;
+	del = dupadjust = replace = was_deleted = 0;
+
+	/*
+	 * Fixed-length records with partial puts: it's an error to specify
+	 * anything other simple overwrite.
+	 */
+	if (F_ISSET(dbp, DB_AM_FIXEDLEN) &&
+	    F_ISSET(data, DB_DBT_PARTIAL) && data->size != data->dlen)
+		return (__db_rec_repl(env, data->size, data->dlen));
+
+	/*
+	 * Figure out how much space the data will take, including if it's a
+	 * partial record.
+	 *
+	 * Fixed-length records: it's an error to specify a record that's
+	 * longer than the fixed-length, and we never require less than
+	 * the fixed-length record size.
+	 */
+	data_size = F_ISSET(data, DB_DBT_PARTIAL) ?
+	    __bam_partsize(dbp, op, data, h, indx) : data->size;
+	padrec = 0;
+	if (F_ISSET(dbp, DB_AM_FIXEDLEN)) {
+		if (data_size > t->re_len)
+			return (__db_rec_toobig(env, data_size, t->re_len));
+
+		/* Records that are deleted anyway needn't be padded out. */
+		if (!LF_ISSET(BI_DELETED) && data_size < t->re_len) {
+			padrec = 1;
+			data_size = t->re_len;
+		}
+	}
+
+	/*
+	 * Handle partial puts or short fixed-length records: build the
+	 * real record.
+	 */
+	if (padrec || F_ISSET(data, DB_DBT_PARTIAL)) {
+		tdbt = *data;
+		if ((ret =
+		    __bam_build(dbc, op, &tdbt, h, indx, data_size)) != 0)
+			return (ret);
+		data = &tdbt;
+	}
+
+	/*
+	 * If the user has specified a duplicate comparison function, return
+	 * an error if DB_CURRENT was specified and the replacement data
+	 * doesn't compare equal to the current data.  This stops apps from
+	 * screwing up the duplicate sort order.  We have to do this after
+	 * we build the real record so that we're comparing the real items.
+	 */
+	if (op == DB_CURRENT && dbp->dup_compare != NULL) {
+		if ((ret = __bam_cmp(dbp, dbc->thread_info, dbc->txn, data, h,
+		    indx + (TYPE(h) == P_LBTREE ? O_INDX : 0),
+		    dbp->dup_compare, &cmp)) != 0)
+			return (ret);
+		if (cmp != 0) {
+			__db_errx(env,
+		"Existing data sorts differently from put data");
+			return (EINVAL);
+		}
+	}
+
+	/*
+	 * If the key or data item won't fit on a page, we'll have to store
+	 * them on overflow pages.
+	 */
+	needed = 0;
+	bigdata = data_size > cp->ovflsize;
+	switch (op) {
+	case DB_KEYFIRST:
+		/* We're adding a new key and data pair. */
+		bigkey = key->size > cp->ovflsize;
+		if (bigkey)
+			needed += BOVERFLOW_PSIZE;
+		else
+			needed += BKEYDATA_PSIZE(key->size);
+		if (bigdata)
+			needed += BOVERFLOW_PSIZE;
+		else
+			needed += BKEYDATA_PSIZE(data_size);
+		break;
+	case DB_AFTER:
+	case DB_BEFORE:
+	case DB_CURRENT:
+		/*
+		 * We're either overwriting the data item of a key/data pair
+		 * or we're creating a new on-page duplicate and only adding
+		 * a data item.
+		 *
+		 * !!!
+		 * We're not currently correcting for space reclaimed from
+		 * already deleted items, but I don't think it's worth the
+		 * complexity.
+		 */
+		bigkey = 0;
+		if (op == DB_CURRENT) {
+			bk = GET_BKEYDATA(dbp, h,
+			    indx + (TYPE(h) == P_LBTREE ? O_INDX : 0));
+			if (B_TYPE(bk->type) == B_KEYDATA)
+				have_bytes = BKEYDATA_PSIZE(bk->len);
+			else
+				have_bytes = BOVERFLOW_PSIZE;
+			need_bytes = 0;
+		} else {
+			have_bytes = 0;
+			need_bytes = sizeof(db_indx_t);
+		}
+		if (bigdata)
+			need_bytes += BOVERFLOW_PSIZE;
+		else
+			need_bytes += BKEYDATA_PSIZE(data_size);
+
+		if (have_bytes < need_bytes)
+			needed += need_bytes - have_bytes;
+		break;
+	default:
+		return (__db_unknown_flag(env, "DB->put", op));
+	}
+
+	/* Split the page if there's not enough room. */
+	if (P_FREESPACE(dbp, h) < needed)
+		return (DB_NEEDSPLIT);
+
+	/*
+	 * Check to see if we will convert to off page duplicates -- if
+	 * so, we'll need a page.
+	 */
+	if (F_ISSET(dbp, DB_AM_DUP) &&
+	    TYPE(h) == P_LBTREE && op != DB_KEYFIRST &&
+	    P_FREESPACE(dbp, h) - needed <= dbp->pgsize / 2 &&
+	    __bam_dup_check(dbc, op, h, indx, needed, &cnt)) {
+		pages = 1;
+		dupadjust = 1;
+	} else
+		pages = 0;
+
+	/*
+	 * If we are not using transactions and there is a page limit
+	 * set on the file, then figure out if things will fit before
+	 * taking action.
+	 */
+	if (dbc->txn == NULL && mpf->mfp->maxpgno != 0) {
+		pagespace = P_MAXSPACE(dbp, dbp->pgsize);
+		if (bigdata)
+			pages += ((data_size - 1) / pagespace) + 1;
+		if (bigkey)
+			pages += ((key->size - 1) / pagespace) + 1;
+
+		if (pages > (mpf->mfp->maxpgno - mpf->mfp->last_pgno))
+			return (__db_space_err(dbp));
+	}
+
+	if ((ret = __memp_dirty(mpf, &h,
+	     dbc->thread_info, dbc->txn, dbc->priority, 0)) != 0)
+		return (ret);
+	if (cp->csp->page == cp->page)
+		cp->csp->page = h;
+	cp->page = h;
+
+	/*
+	 * The code breaks it up into five cases:
+	 *
+	 * 1. Insert a new key/data pair.
+	 * 2. Append a new data item (a new duplicate).
+	 * 3. Insert a new data item (a new duplicate).
+	 * 4. Delete and re-add the data item (overflow item).
+	 * 5. Overwrite the data item.
+	 */
+	switch (op) {
+	case DB_KEYFIRST:		/* 1. Insert a new key/data pair. */
+		if (bigkey) {
+			if ((ret = __bam_ovput(dbc,
+			    B_OVERFLOW, PGNO_INVALID, h, indx, key)) != 0)
+				return (ret);
+		} else
+			if ((ret = __db_pitem(dbc, h, indx,
+			    BKEYDATA_SIZE(key->size), NULL, key)) != 0)
+				return (ret);
+
+		if ((ret = __bam_ca_di(dbc, PGNO(h), indx, 1)) != 0)
+			return (ret);
+		++indx;
+		break;
+	case DB_AFTER:			/* 2. Append a new data item. */
+		if (TYPE(h) == P_LBTREE) {
+			/* Copy the key for the duplicate and adjust cursors. */
+			if ((ret =
+			    __bam_adjindx(dbc, h, indx + P_INDX, indx, 1)) != 0)
+				return (ret);
+			if ((ret =
+			    __bam_ca_di(dbc, PGNO(h), indx + P_INDX, 1)) != 0)
+				return (ret);
+
+			indx += 3;
+
+			cp->indx += 2;
+		} else {
+			++indx;
+			cp->indx += 1;
+		}
+		break;
+	case DB_BEFORE:			/* 3. Insert a new data item. */
+		if (TYPE(h) == P_LBTREE) {
+			/* Copy the key for the duplicate and adjust cursors. */
+			if ((ret = __bam_adjindx(dbc, h, indx, indx, 1)) != 0)
+				return (ret);
+			if ((ret = __bam_ca_di(dbc, PGNO(h), indx, 1)) != 0)
+				return (ret);
+
+			++indx;
+		}
+		break;
+	case DB_CURRENT:
+		 /*
+		  * Clear the cursor's deleted flag.  The problem is that if
+		  * we deadlock or fail while deleting the overflow item or
+		  * replacing the non-overflow item, a subsequent cursor close
+		  * will try and remove the item because the cursor's delete
+		  * flag is set.
+		  */
+		if ((ret = __bam_ca_delete(dbp, PGNO(h), indx, 0, NULL)) != 0)
+			return (ret);
+
+		if (TYPE(h) == P_LBTREE)
+			++indx;
+		bk = GET_BKEYDATA(dbp, h, indx);
+
+		/*
+		 * In a Btree deleted records aren't counted (deleted records
+		 * are counted in a Recno because all accesses are based on
+		 * record number).  If it's a Btree and it's a DB_CURRENT
+		 * operation overwriting a previously deleted record, increment
+		 * the record count.
+		 */
+		if (TYPE(h) == P_LBTREE || TYPE(h) == P_LDUP)
+			was_deleted = B_DISSET(bk->type);
+
+		/*
+		 * 4. Delete and re-add the data item.
+		 *
+		 * If we're changing the type of the on-page structure, or we
+		 * are referencing offpage items, we have to delete and then
+		 * re-add the item.  We do not do any cursor adjustments here
+		 * because we're going to immediately re-add the item into the
+		 * same slot.
+		 */
+		if (bigdata || B_TYPE(bk->type) != B_KEYDATA) {
+			if ((ret = __bam_ditem(dbc, h, indx)) != 0)
+				return (ret);
+			del = 1;
+			break;
+		}
+
+		/* 5. Overwrite the data item. */
+		replace = 1;
+		break;
+	default:
+		return (__db_unknown_flag(env, "DB->put", op));
+	}
+
+	/* Add the data. */
+	if (bigdata) {
+		/*
+		 * We do not have to handle deleted (BI_DELETED) records
+		 * in this case; the actual records should never be created.
+		 */
+		DB_ASSERT(env, !LF_ISSET(BI_DELETED));
+		ret = __bam_ovput(dbc,
+		    B_OVERFLOW, PGNO_INVALID, h, indx, data);
+	} else {
+		if (LF_ISSET(BI_DELETED)) {
+			B_TSET_DELETED(bk_tmp.type, B_KEYDATA);
+			bk_tmp.len = data->size;
+			bk_hdr.data = &bk_tmp;
+			bk_hdr.size = SSZA(BKEYDATA, data);
+			ret = __db_pitem(dbc, h, indx,
+			    BKEYDATA_SIZE(data->size), &bk_hdr, data);
+		} else if (replace)
+			ret = __bam_ritem(dbc, h, indx, data);
+		else
+			ret = __db_pitem(dbc, h, indx,
+			    BKEYDATA_SIZE(data->size), NULL, data);
+	}
+	if (ret != 0) {
+		if (del == 1 && (t_ret =
+		     __bam_ca_di(dbc, PGNO(h), indx + 1, -1)) != 0) {
+			__db_err(env, t_ret,
+			    "cursor adjustment after delete failed");
+			return (__env_panic(env, t_ret));
+		}
+		return (ret);
+	}
+
+	/*
+	 * Re-position the cursors if necessary and reset the current cursor
+	 * to point to the new item.
+	 */
+	if (op != DB_CURRENT) {
+		if ((ret = __bam_ca_di(dbc, PGNO(h), indx, 1)) != 0)
+			return (ret);
+		cp->indx = TYPE(h) == P_LBTREE ? indx - O_INDX : indx;
+	}
+
+	/*
+	 * If we've changed the record count, update the tree.  There's no
+	 * need to adjust the count if the operation not performed on the
+	 * current record or when the current record was previously deleted.
+	 */
+	if (F_ISSET(cp, C_RECNUM) && (op != DB_CURRENT || was_deleted))
+		if ((ret = __bam_adjust(dbc, 1)) != 0)
+			return (ret);
+
+	/*
+	 * If a Btree leaf page is at least 50% full and we may have added or
+	 * modified a duplicate data item, see if the set of duplicates takes
+	 * up at least 25% of the space on the page.  If it does, move it onto
+	 * its own page.
+	 */
+	if (dupadjust &&
+	    (ret = __bam_dup_convert(dbc, h, indx - O_INDX, cnt)) != 0)
+		return (ret);
+
+	/* If we've modified a recno file, set the flag. */
+	if (dbc->dbtype == DB_RECNO)
+		t->re_modified = 1;
+
+	return (ret);
+}
+
+/*
+ * __bam_partsize --
+ *	Figure out how much space a partial data item is in total.
+ */
+static u_int32_t
+__bam_partsize(dbp, op, data, h, indx)
+	DB *dbp;
+	u_int32_t op, indx;
+	DBT *data;
+	PAGE *h;
+{
+	BKEYDATA *bk;
+	u_int32_t nbytes;
+
+	/*
+	 * If the record doesn't already exist, it's simply the data we're
+	 * provided.
+	 */
+	if (op != DB_CURRENT)
+		return (data->doff + data->size);
+
+	/*
+	 * Otherwise, it's the data provided plus any already existing data
+	 * that we're not replacing.
+	 */
+	bk = GET_BKEYDATA(dbp, h, indx + (TYPE(h) == P_LBTREE ? O_INDX : 0));
+	nbytes =
+	    B_TYPE(bk->type) == B_OVERFLOW ? ((BOVERFLOW *)bk)->tlen : bk->len;
+
+	return (__db_partsize(nbytes, data));
+}
+
+/*
+ * __bam_build --
+ *	Build the real record for a partial put, or short fixed-length record.
+ */
+static int
+__bam_build(dbc, op, dbt, h, indx, nbytes)
+	DBC *dbc;
+	u_int32_t op, indx, nbytes;
+	DBT *dbt;
+	PAGE *h;
+{
+	BKEYDATA *bk, tbk;
+	BOVERFLOW *bo;
+	BTREE *t;
+	DB *dbp;
+	DBT copy, *rdata;
+	u_int32_t len, tlen;
+	u_int8_t *p;
+	int ret;
+
+	COMPQUIET(bo, NULL);
+
+	dbp = dbc->dbp;
+	t = dbp->bt_internal;
+
+	/* We use the record data return memory, it's only a short-term use. */
+	rdata = &dbc->my_rdata;
+	if (rdata->ulen < nbytes) {
+		if ((ret = __os_realloc(dbp->env,
+		    nbytes, &rdata->data)) != 0) {
+			rdata->ulen = 0;
+			rdata->data = NULL;
+			return (ret);
+		}
+		rdata->ulen = nbytes;
+	}
+
+	/*
+	 * We use nul or pad bytes for any part of the record that isn't
+	 * specified; get it over with.
+	 */
+	memset(rdata->data,
+	   F_ISSET(dbp, DB_AM_FIXEDLEN) ? t->re_pad : 0, nbytes);
+
+	/*
+	 * In the next clauses, we need to do three things: a) set p to point
+	 * to the place at which to copy the user's data, b) set tlen to the
+	 * total length of the record, not including the bytes contributed by
+	 * the user, and c) copy any valid data from an existing record.  If
+	 * it's not a partial put (this code is called for both partial puts
+	 * and fixed-length record padding) or it's a new key, we can cut to
+	 * the chase.
+	 */
+	if (!F_ISSET(dbt, DB_DBT_PARTIAL) || op != DB_CURRENT) {
+		p = (u_int8_t *)rdata->data + dbt->doff;
+		tlen = dbt->doff;
+		goto user_copy;
+	}
+
+	/* Find the current record. */
+	if (indx < NUM_ENT(h)) {
+		bk = GET_BKEYDATA(dbp, h, indx + (TYPE(h) == P_LBTREE ?
+		    O_INDX : 0));
+		bo = (BOVERFLOW *)bk;
+	} else {
+		bk = &tbk;
+		B_TSET(bk->type, B_KEYDATA);
+		bk->len = 0;
+	}
+	if (B_TYPE(bk->type) == B_OVERFLOW) {
+		/*
+		 * In the case of an overflow record, we shift things around
+		 * in the current record rather than allocate a separate copy.
+		 */
+		memset(&copy, 0, sizeof(copy));
+		if ((ret = __db_goff(dbp, dbc->thread_info, dbc->txn, &copy,
+		    bo->tlen, bo->pgno, &rdata->data, &rdata->ulen)) != 0)
+			return (ret);
+
+		/* Skip any leading data from the original record. */
+		tlen = dbt->doff;
+		p = (u_int8_t *)rdata->data + dbt->doff;
+
+		/*
+		 * Copy in any trailing data from the original record.
+		 *
+		 * If the original record was larger than the original offset
+		 * plus the bytes being deleted, there is trailing data in the
+		 * original record we need to preserve.  If we aren't deleting
+		 * the same number of bytes as we're inserting, copy it up or
+		 * down, into place.
+		 *
+		 * Use memmove(), the regions may overlap.
+		 */
+		if (bo->tlen > dbt->doff + dbt->dlen) {
+			len = bo->tlen - (dbt->doff + dbt->dlen);
+			if (dbt->dlen != dbt->size)
+				memmove(p + dbt->size, p + dbt->dlen, len);
+			tlen += len;
+		}
+	} else {
+		/* Copy in any leading data from the original record. */
+		memcpy(rdata->data,
+		    bk->data, dbt->doff > bk->len ? bk->len : dbt->doff);
+		tlen = dbt->doff;
+		p = (u_int8_t *)rdata->data + dbt->doff;
+
+		/* Copy in any trailing data from the original record. */
+		len = dbt->doff + dbt->dlen;
+		if (bk->len > len) {
+			memcpy(p + dbt->size, bk->data + len, bk->len - len);
+			tlen += bk->len - len;
+		}
+	}
+
+user_copy:
+	/*
+	 * Copy in the application provided data -- p and tlen must have been
+	 * initialized above.
+	 */
+	memcpy(p, dbt->data, dbt->size);
+	tlen += dbt->size;
+
+	/* Set the DBT to reference our new record. */
+	rdata->size = F_ISSET(dbp, DB_AM_FIXEDLEN) ? t->re_len : tlen;
+	rdata->dlen = 0;
+	rdata->doff = 0;
+	rdata->flags = 0;
+	*dbt = *rdata;
+	return (0);
+}
+
+/*
+ * __bam_ritem --
+ *	Replace an item on a page.
+ *
+ * PUBLIC: int __bam_ritem __P((DBC *, PAGE *, u_int32_t, DBT *));
+ */
+int
+__bam_ritem(dbc, h, indx, data)
+	DBC *dbc;
+	PAGE *h;
+	u_int32_t indx;
+	DBT *data;
+{
+	BKEYDATA *bk;
+	DB *dbp;
+	DBT orig, repl;
+	db_indx_t cnt, lo, ln, min, off, prefix, suffix;
+	int32_t nbytes;
+	int ret;
+	db_indx_t *inp;
+	u_int8_t *p, *t;
+
+	dbp = dbc->dbp;
+
+	/*
+	 * Replace a single item onto a page.  The logic figuring out where
+	 * to insert and whether it fits is handled in the caller.  All we do
+	 * here is manage the page shuffling.
+	 */
+	bk = GET_BKEYDATA(dbp, h, indx);
+
+	/* Log the change. */
+	if (DBC_LOGGING(dbc)) {
+		/*
+		 * We might as well check to see if the two data items share
+		 * a common prefix and suffix -- it can save us a lot of log
+		 * message if they're large.
+		 */
+		min = data->size < bk->len ? data->size : bk->len;
+		for (prefix = 0,
+		    p = bk->data, t = data->data;
+		    prefix < min && *p == *t; ++prefix, ++p, ++t)
+			;
+
+		min -= prefix;
+		for (suffix = 0,
+		    p = (u_int8_t *)bk->data + bk->len - 1,
+		    t = (u_int8_t *)data->data + data->size - 1;
+		    suffix < min && *p == *t; ++suffix, --p, --t)
+			;
+
+		/* We only log the parts of the keys that have changed. */
+		orig.data = (u_int8_t *)bk->data + prefix;
+		orig.size = bk->len - (prefix + suffix);
+		repl.data = (u_int8_t *)data->data + prefix;
+		repl.size = data->size - (prefix + suffix);
+		if ((ret = __bam_repl_log(dbp, dbc->txn, &LSN(h), 0, PGNO(h),
+		    &LSN(h), (u_int32_t)indx, (u_int32_t)B_DISSET(bk->type),
+		    &orig, &repl, (u_int32_t)prefix, (u_int32_t)suffix)) != 0)
+			return (ret);
+	} else
+		LSN_NOT_LOGGED(LSN(h));
+
+	/*
+	 * Set references to the first in-use byte on the page and the
+	 * first byte of the item being replaced.
+	 */
+	inp = P_INP(dbp, h);
+	p = (u_int8_t *)h + HOFFSET(h);
+	t = (u_int8_t *)bk;
+
+	/*
+	 * If the entry is growing in size, shift the beginning of the data
+	 * part of the page down.  If the entry is shrinking in size, shift
+	 * the beginning of the data part of the page up.  Use memmove(3),
+	 * the regions overlap.
+	 */
+	lo = BKEYDATA_SIZE(bk->len);
+	ln = (db_indx_t)BKEYDATA_SIZE(data->size);
+	if (lo != ln) {
+		nbytes = lo - ln;		/* Signed difference. */
+		if (p == t)			/* First index is fast. */
+			inp[indx] += nbytes;
+		else {				/* Else, shift the page. */
+			memmove(p + nbytes, p, (size_t)(t - p));
+
+			/* Adjust the indices' offsets. */
+			off = inp[indx];
+			for (cnt = 0; cnt < NUM_ENT(h); ++cnt)
+				if (inp[cnt] <= off)
+					inp[cnt] += nbytes;
+		}
+
+		/* Clean up the page and adjust the item's reference. */
+		HOFFSET(h) += nbytes;
+		t += nbytes;
+	}
+
+	/* Copy the new item onto the page. */
+	bk = (BKEYDATA *)t;
+	B_TSET(bk->type, B_KEYDATA);
+	bk->len = data->size;
+	memcpy(bk->data, data->data, data->size);
+
+	return (0);
+}
+
+/*
+ * __bam_dup_check --
+ *	Check to see if the duplicate set at indx should have its own page.
+ */
+static int
+__bam_dup_check(dbc, op, h, indx, sz, cntp)
+	DBC *dbc;
+	u_int32_t op;
+	PAGE *h;
+	u_int32_t indx, sz;
+	db_indx_t *cntp;
+{
+	BKEYDATA *bk;
+	DB *dbp;
+	db_indx_t cnt, first, *inp;
+
+	dbp = dbc->dbp;
+	inp = P_INP(dbp, h);
+
+	/*
+	 * Count the duplicate records and calculate how much room they're
+	 * using on the page.
+	 */
+	while (indx > 0 && inp[indx] == inp[indx - P_INDX])
+		indx -= P_INDX;
+
+	/* Count the key once. */
+	bk = GET_BKEYDATA(dbp, h, indx);
+	sz += B_TYPE(bk->type) == B_KEYDATA ?
+	    BKEYDATA_PSIZE(bk->len) : BOVERFLOW_PSIZE;
+
+	/* Sum up all the data items. */
+	first = indx;
+
+	/*
+	 * Account for the record being inserted.  If we are replacing it,
+	 * don't count it twice.
+	 *
+	 * We execute the loop with first == indx to get the size of the
+	 * first record.
+	 */
+	cnt = op == DB_CURRENT ? 0 : 1;
+	for (first = indx;
+	    indx < NUM_ENT(h) && inp[first] == inp[indx];
+	    ++cnt, indx += P_INDX) {
+		bk = GET_BKEYDATA(dbp, h, indx + O_INDX);
+		sz += B_TYPE(bk->type) == B_KEYDATA ?
+		    BKEYDATA_PSIZE(bk->len) : BOVERFLOW_PSIZE;
+	}
+
+	/*
+	 * We have to do these checks when the user is replacing the cursor's
+	 * data item -- if the application replaces a duplicate item with a
+	 * larger data item, it can increase the amount of space used by the
+	 * duplicates, requiring this check.  But that means we may have done
+	 * this check when it wasn't a duplicate item after all.
+	 */
+	if (cnt == 1)
+		return (0);
+
+	/*
+	 * If this set of duplicates is using more than 25% of the page, move
+	 * them off.  The choice of 25% is a WAG, but the value must be small
+	 * enough that we can always split a page without putting duplicates
+	 * on two different pages.
+	 */
+	if (sz < dbp->pgsize / 4)
+		return (0);
+
+	*cntp = cnt;
+	return (1);
+}
+
+/*
+ * __bam_dup_convert --
+ *	Move a set of duplicates off-page and into their own tree.
+ */
+static int
+__bam_dup_convert(dbc, h, indx, cnt)
+	DBC *dbc;
+	PAGE *h;
+	u_int32_t indx, cnt;
+{
+	BKEYDATA *bk;
+	DB *dbp;
+	DBT hdr;
+	DB_MPOOLFILE *mpf;
+	PAGE *dp;
+	db_indx_t cpindx, dindx, first, *inp;
+	int ret, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	inp = P_INP(dbp, h);
+
+	/* Move to the beginning of the dup set. */
+	while (indx > 0 && inp[indx] == inp[indx - P_INDX])
+		indx -= P_INDX;
+
+	/* Get a new page. */
+	if ((ret = __db_new(dbc,
+	    dbp->dup_compare == NULL ? P_LRECNO : P_LDUP, &dp)) != 0)
+		return (ret);
+	P_INIT(dp, dbp->pgsize, dp->pgno,
+	    PGNO_INVALID, PGNO_INVALID, LEAFLEVEL, TYPE(dp));
+
+	/*
+	 * Move this set of duplicates off the page.  First points to the first
+	 * key of the first duplicate key/data pair, cnt is the number of pairs
+	 * we're dealing with.
+	 */
+	memset(&hdr, 0, sizeof(hdr));
+	first = indx;
+	dindx = indx;
+	cpindx = 0;
+	do {
+		/* Move cursors referencing the old entry to the new entry. */
+		if ((ret = __bam_ca_dup(dbc, first,
+		    PGNO(h), indx, PGNO(dp), cpindx)) != 0)
+			goto err;
+
+		/*
+		 * Copy the entry to the new page.  If the off-duplicate page
+		 * If the off-duplicate page is a Btree page (i.e. dup_compare
+		 * will be non-NULL, we use Btree pages for sorted dups,
+		 * and Recno pages for unsorted dups), move all entries
+		 * normally, even deleted ones.  If it's a Recno page,
+		 * deleted entries are discarded (if the deleted entry is
+		 * overflow, then free up those pages).
+		 */
+		bk = GET_BKEYDATA(dbp, h, dindx + 1);
+		hdr.data = bk;
+		hdr.size = B_TYPE(bk->type) == B_KEYDATA ?
+		    BKEYDATA_SIZE(bk->len) : BOVERFLOW_SIZE;
+		if (dbp->dup_compare == NULL && B_DISSET(bk->type)) {
+			/*
+			 * Unsorted dups, i.e. recno page, and we have
+			 * a deleted entry, don't move it, but if it was
+			 * an overflow entry, we need to free those pages.
+			 */
+			if (B_TYPE(bk->type) == B_OVERFLOW &&
+			    (ret = __db_doff(dbc,
+			    (GET_BOVERFLOW(dbp, h, dindx + 1))->pgno)) != 0)
+				goto err;
+		} else {
+			if ((ret = __db_pitem(
+			    dbc, dp, cpindx, hdr.size, &hdr, NULL)) != 0)
+				goto err;
+			++cpindx;
+		}
+		/* Delete all but the last reference to the key. */
+		if (cnt != 1) {
+			if ((ret = __bam_adjindx(dbc,
+			    h, dindx, first + 1, 0)) != 0)
+				goto err;
+		} else
+			dindx++;
+
+		/* Delete the data item. */
+		if ((ret = __db_ditem(dbc, h, dindx, hdr.size)) != 0)
+			goto err;
+		indx += P_INDX;
+	} while (--cnt);
+
+	/* Put in a new data item that points to the duplicates page. */
+	if ((ret = __bam_ovput(dbc,
+	    B_DUPLICATE, dp->pgno, h, first + 1, NULL)) != 0)
+		goto err;
+
+	/* Adjust cursors for all the above movements. */
+	ret = __bam_ca_di(dbc,
+	    PGNO(h), first + P_INDX, (int)(first + P_INDX - indx));
+
+err:	if ((t_ret = __memp_fput(mpf,
+	     dbc->thread_info, dp, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+
+	return (ret);
+}
+
+/*
+ * __bam_ovput --
+ *	Build an item for an off-page duplicates page or overflow page and
+ *	insert it on the page.
+ */
+static int
+__bam_ovput(dbc, type, pgno, h, indx, item)
+	DBC *dbc;
+	u_int32_t type, indx;
+	db_pgno_t pgno;
+	PAGE *h;
+	DBT *item;
+{
+	BOVERFLOW bo;
+	DBT hdr;
+	int ret;
+
+	UMRW_SET(bo.unused1);
+	B_TSET(bo.type, type);
+	UMRW_SET(bo.unused2);
+
+	/*
+	 * If we're creating an overflow item, do so and acquire the page
+	 * number for it.  If we're creating an off-page duplicates tree,
+	 * we are giving the page number as an argument.
+	 */
+	if (type == B_OVERFLOW) {
+		if ((ret = __db_poff(dbc, item, &bo.pgno)) != 0)
+			return (ret);
+		bo.tlen = item->size;
+	} else {
+		bo.pgno = pgno;
+		bo.tlen = 0;
+	}
+
+	/* Store the new record on the page. */
+	memset(&hdr, 0, sizeof(hdr));
+	hdr.data = &bo;
+	hdr.size = BOVERFLOW_SIZE;
+	return (__db_pitem(dbc, h, indx, BOVERFLOW_SIZE, &hdr, NULL));
+}

btree/bt_reclaim.c

@@ -0,0 +1,82 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1998,2008 Oracle.  All rights reserved.
+ *
+ * $Id: bt_reclaim.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/lock.h"
+
+/*
+ * __bam_reclaim --
+ *	Free a database.
+ *
+ * PUBLIC: int __bam_reclaim __P((DB *, DB_THREAD_INFO *, DB_TXN *));
+ */
+int
+__bam_reclaim(dbp, ip, txn)
+	DB *dbp;
+	DB_THREAD_INFO *ip;
+	DB_TXN *txn;
+{
+	DBC *dbc;
+	DB_LOCK meta_lock;
+	int ret, t_ret;
+
+	/* Acquire a cursor. */
+	if ((ret = __db_cursor(dbp, ip, txn, &dbc, 0)) != 0)
+		return (ret);
+
+	/* Write lock the metapage for deallocations. */
+	if ((ret = __db_lget(dbc,
+	    0, PGNO_BASE_MD, DB_LOCK_WRITE, 0, &meta_lock)) != 0)
+		goto err;
+
+	/* Avoid locking every page, we have the handle locked exclusive. */
+	F_SET(dbc, DBC_DONTLOCK);
+
+	/* Walk the tree, freeing pages. */
+	ret = __bam_traverse(dbc,
+	    DB_LOCK_WRITE, dbc->internal->root, __db_reclaim_callback, NULL);
+
+	if ((t_ret = __TLPUT(dbc, meta_lock)) != 0 && ret == 0)
+		ret = t_ret;
+
+	/* Discard the cursor. */
+err:	if ((t_ret = __dbc_close(dbc)) != 0 && ret == 0)
+		ret = t_ret;
+
+	return (ret);
+}
+
+/*
+ * __bam_truncate --
+ *	Truncate a database.
+ *
+ * PUBLIC: int __bam_truncate __P((DBC *, u_int32_t *));
+ */
+int
+__bam_truncate(dbc, countp)
+	DBC *dbc;
+	u_int32_t *countp;
+{
+	u_int32_t count;
+	int ret;
+
+	count = 0;
+
+	/* Walk the tree, freeing pages. */
+	ret = __bam_traverse(dbc,
+	    DB_LOCK_WRITE, dbc->internal->root, __db_truncate_callback, &count);
+
+	if (countp != NULL)
+		*countp = count;
+
+	return (ret);
+}

btree/bt_rsearch.c

@@ -0,0 +1,433 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995, 1996
+ *	Keith Bostic.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: bt_rsearch.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/lock.h"
+#include "dbinc/mp.h"
+
+/*
+ * __bam_rsearch --
+ *	Search a btree for a record number.
+ *
+ * PUBLIC: int __bam_rsearch __P((DBC *, db_recno_t *, u_int32_t, int, int *));
+ */
+int
+__bam_rsearch(dbc, recnop, flags, stop, exactp)
+	DBC *dbc;
+	db_recno_t *recnop;
+	u_int32_t flags;
+	int stop, *exactp;
+{
+	BINTERNAL *bi;
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DB_LOCK lock;
+	DB_MPOOLFILE *mpf;
+	PAGE *h;
+	RINTERNAL *ri;
+	db_indx_t adjust, deloffset, indx, top;
+	db_lockmode_t lock_mode;
+	db_pgno_t pg;
+	db_recno_t recno, t_recno, total;
+	int ret, stack, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	h = NULL;
+
+	BT_STK_CLR(cp);
+
+	/*
+	 * There are several ways we search a btree tree.  The flags argument
+	 * specifies if we're acquiring read or write locks and if we are
+	 * locking pairs of pages.  In addition, if we're adding or deleting
+	 * an item, we have to lock the entire tree, regardless.  See btree.h
+	 * for more details.
+	 *
+	 * If write-locking pages, we need to know whether or not to acquire a
+	 * write lock on a page before getting it.  This depends on how deep it
+	 * is in tree, which we don't know until we acquire the root page.  So,
+	 * if we need to lock the root page we may have to upgrade it later,
+	 * because we won't get the correct lock initially.
+	 *
+	 * Retrieve the root page.
+	 */
+
+	if ((ret = __bam_get_root(dbc, cp->root, stop, flags, &stack)) != 0)
+		return (ret);
+	lock_mode = cp->csp->lock_mode;
+	lock = cp->csp->lock;
+	h = cp->csp->page;
+
+	BT_STK_CLR(cp);
+	/*
+	 * If appending to the tree, set the record number now -- we have the
+	 * root page locked.
+	 *
+	 * Delete only deletes exact matches, read only returns exact matches.
+	 * Note, this is different from __bam_search(), which returns non-exact
+	 * matches for read.
+	 *
+	 * The record may not exist.  We can only return the correct location
+	 * for the record immediately after the last record in the tree, so do
+	 * a fast check now.
+	 */
+	total = RE_NREC(h);
+	if (LF_ISSET(SR_APPEND)) {
+		*exactp = 0;
+		*recnop = recno = total + 1;
+	} else {
+		recno = *recnop;
+		if (recno <= total)
+			*exactp = 1;
+		else {
+			*exactp = 0;
+			if (!LF_ISSET(SR_PAST_EOF) || recno > total + 1) {
+				/*
+				 * Keep the page locked for serializability.
+				 *
+				 * XXX
+				 * This leaves the root page locked, which will
+				 * eliminate any concurrency.  A possible fix
+				 * would be to lock the last leaf page instead.
+				 */
+				ret = __memp_fput(mpf,
+				    dbc->thread_info, h, dbc->priority);
+				if ((t_ret =
+				    __TLPUT(dbc, lock)) != 0 && ret == 0)
+					ret = t_ret;
+				return (ret == 0 ? DB_NOTFOUND : ret);
+			}
+		}
+	}
+
+	/*
+	 * !!!
+	 * Record numbers in the tree are 0-based, but the recno is
+	 * 1-based.  All of the calculations below have to take this
+	 * into account.
+	 */
+	for (total = 0;;) {
+		switch (TYPE(h)) {
+		case P_LBTREE:
+		case P_LDUP:
+			recno -= total;
+			/*
+			 * There may be logically deleted records on the page.
+			 * If there are enough, the record may not exist.
+			 */
+			if (TYPE(h) == P_LBTREE) {
+				adjust = P_INDX;
+				deloffset = O_INDX;
+			} else {
+				adjust = O_INDX;
+				deloffset = 0;
+			}
+			for (t_recno = 0, indx = 0;; indx += adjust) {
+				if (indx >= NUM_ENT(h)) {
+					*exactp = 0;
+					if (!LF_ISSET(SR_PAST_EOF) ||
+					    recno > t_recno + 1) {
+						ret = __memp_fput(mpf,
+						    dbc->thread_info,
+						    h, dbc->priority);
+						h = NULL;
+						if ((t_ret = __TLPUT(dbc,
+						    lock)) != 0 && ret == 0)
+							ret = t_ret;
+						if (ret == 0)
+							ret = DB_NOTFOUND;
+						goto err;
+					}
+				}
+				if (!B_DISSET(GET_BKEYDATA(dbp, h,
+				    indx + deloffset)->type) &&
+				    ++t_recno == recno)
+					break;
+			}
+
+			/* Correct from 1-based to 0-based for a page offset. */
+			BT_STK_ENTER(dbp->env,
+			    cp, h, indx, lock, lock_mode, ret);
+			if (ret != 0)
+				goto err;
+			return (0);
+		case P_IBTREE:
+			for (indx = 0, top = NUM_ENT(h);;) {
+				bi = GET_BINTERNAL(dbp, h, indx);
+				if (++indx == top || total + bi->nrecs >= recno)
+					break;
+				total += bi->nrecs;
+			}
+			pg = bi->pgno;
+			break;
+		case P_LRECNO:
+			recno -= total;
+
+			/* Correct from 1-based to 0-based for a page offset. */
+			--recno;
+			BT_STK_ENTER(dbp->env,
+			    cp, h, recno, lock, lock_mode, ret);
+			if (ret != 0)
+				goto err;
+			return (0);
+		case P_IRECNO:
+			for (indx = 0, top = NUM_ENT(h);;) {
+				ri = GET_RINTERNAL(dbp, h, indx);
+				if (++indx == top || total + ri->nrecs >= recno)
+					break;
+				total += ri->nrecs;
+			}
+			pg = ri->pgno;
+			break;
+		default:
+			return (__db_pgfmt(dbp->env, h->pgno));
+		}
+		--indx;
+
+		/* Return if this is the lowest page wanted. */
+		if (stop == LEVEL(h)) {
+			BT_STK_ENTER(dbp->env,
+			    cp, h, indx, lock, lock_mode, ret);
+			if (ret != 0)
+				goto err;
+			return (0);
+		}
+		if (stack) {
+			BT_STK_PUSH(dbp->env,
+			    cp, h, indx, lock, lock_mode, ret);
+			if (ret != 0)
+				goto err;
+			h = NULL;
+
+			lock_mode = DB_LOCK_WRITE;
+			if ((ret =
+			    __db_lget(dbc, 0, pg, lock_mode, 0, &lock)) != 0)
+				goto err;
+		} else {
+			/*
+			 * Decide if we want to return a pointer to the next
+			 * page in the stack.  If we do, write lock it and
+			 * never unlock it.
+			 */
+			if ((LF_ISSET(SR_PARENT) &&
+			    (u_int8_t)(stop + 1) >= (u_int8_t)(LEVEL(h) - 1)) ||
+			    (LEVEL(h) - 1) == LEAFLEVEL)
+				stack = 1;
+
+			if ((ret = __memp_fput(mpf,
+			    dbc->thread_info, h, dbc->priority)) != 0)
+				goto err;
+			h = NULL;
+
+			lock_mode = stack &&
+			    LF_ISSET(SR_WRITE) ? DB_LOCK_WRITE : DB_LOCK_READ;
+			if ((ret = __db_lget(dbc,
+			    LCK_COUPLE_ALWAYS, pg, lock_mode, 0, &lock)) != 0) {
+				/*
+				 * If we fail, discard the lock we held.  This
+				 * is OK because this only happens when we are
+				 * descending the tree holding read-locks.
+				 */
+				(void)__LPUT(dbc, lock);
+				goto err;
+			}
+		}
+
+		if ((ret = __memp_fget(mpf, &pg,
+		     dbc->thread_info, dbc->txn, 0, &h)) != 0)
+			goto err;
+	}
+	/* NOTREACHED */
+
+err:	if (h != NULL && (t_ret = __memp_fput(mpf,
+	    dbc->thread_info, h, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+
+	BT_STK_POP(cp);
+	__bam_stkrel(dbc, 0);
+
+	return (ret);
+}
+
+/*
+ * __bam_adjust --
+ *	Adjust the tree after adding or deleting a record.
+ *
+ * PUBLIC: int __bam_adjust __P((DBC *, int32_t));
+ */
+int
+__bam_adjust(dbc, adjust)
+	DBC *dbc;
+	int32_t adjust;
+{
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DB_MPOOLFILE *mpf;
+	EPG *epg;
+	PAGE *h;
+	db_pgno_t root_pgno;
+	int ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	root_pgno = cp->root;
+
+	/* Update the record counts for the tree. */
+	for (epg = cp->sp; epg <= cp->csp; ++epg) {
+		h = epg->page;
+		if (TYPE(h) == P_IBTREE || TYPE(h) == P_IRECNO) {
+			if ((ret = __memp_dirty(mpf, &h,
+			    dbc->thread_info, dbc->txn, dbc->priority, 0)) != 0)
+				return (ret);
+			epg->page = h;
+			if (DBC_LOGGING(dbc)) {
+				if ((ret = __bam_cadjust_log(dbp, dbc->txn,
+				    &LSN(h), 0, PGNO(h), &LSN(h),
+				    (u_int32_t)epg->indx, adjust,
+				    PGNO(h) == root_pgno ?
+				    CAD_UPDATEROOT : 0)) != 0)
+					return (ret);
+			} else
+				LSN_NOT_LOGGED(LSN(h));
+
+			if (TYPE(h) == P_IBTREE)
+				GET_BINTERNAL(dbp, h, epg->indx)->nrecs +=
+				    adjust;
+			else
+				GET_RINTERNAL(dbp, h, epg->indx)->nrecs +=
+				    adjust;
+
+			if (PGNO(h) == root_pgno)
+				RE_NREC_ADJ(h, adjust);
+		}
+	}
+	return (0);
+}
+
+/*
+ * __bam_nrecs --
+ *	Return the number of records in the tree.
+ *
+ * PUBLIC: int __bam_nrecs __P((DBC *, db_recno_t *));
+ */
+int
+__bam_nrecs(dbc, rep)
+	DBC *dbc;
+	db_recno_t *rep;
+{
+	DB *dbp;
+	DB_LOCK lock;
+	DB_MPOOLFILE *mpf;
+	PAGE *h;
+	db_pgno_t pgno;
+	int ret, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+
+	pgno = dbc->internal->root;
+	if ((ret = __db_lget(dbc, 0, pgno, DB_LOCK_READ, 0, &lock)) != 0)
+		return (ret);
+	if ((ret = __memp_fget(mpf, &pgno,
+	     dbc->thread_info, dbc->txn, 0, &h)) != 0)
+		return (ret);
+
+	*rep = RE_NREC(h);
+
+	ret = __memp_fput(mpf, dbc->thread_info, h, dbc->priority);
+	if ((t_ret = __TLPUT(dbc, lock)) != 0 && ret == 0)
+		ret = t_ret;
+
+	return (ret);
+}
+
+/*
+ * __bam_total --
+ *	Return the number of records below a page.
+ *
+ * PUBLIC: db_recno_t __bam_total __P((DB *, PAGE *));
+ */
+db_recno_t
+__bam_total(dbp, h)
+	DB *dbp;
+	PAGE *h;
+{
+	db_recno_t nrecs;
+	db_indx_t indx, top;
+
+	nrecs = 0;
+	top = NUM_ENT(h);
+
+	switch (TYPE(h)) {
+	case P_LBTREE:
+		/* Check for logically deleted records. */
+		for (indx = 0; indx < top; indx += P_INDX)
+			if (!B_DISSET(
+			    GET_BKEYDATA(dbp, h, indx + O_INDX)->type))
+				++nrecs;
+		break;
+	case P_LDUP:
+		/* Check for logically deleted records. */
+		for (indx = 0; indx < top; indx += O_INDX)
+			if (!B_DISSET(GET_BKEYDATA(dbp, h, indx)->type))
+				++nrecs;
+		break;
+	case P_IBTREE:
+		for (indx = 0; indx < top; indx += O_INDX)
+			nrecs += GET_BINTERNAL(dbp, h, indx)->nrecs;
+		break;
+	case P_LRECNO:
+		nrecs = NUM_ENT(h);
+		break;
+	case P_IRECNO:
+		for (indx = 0; indx < top; indx += O_INDX)
+			nrecs += GET_RINTERNAL(dbp, h, indx)->nrecs;
+		break;
+	}
+
+	return (nrecs);
+}

btree/bt_search.c

@@ -0,0 +1,715 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995, 1996
+ *	Keith Bostic.  All rights reserved.
+ */
+/*
+ * Copyright (c) 1990, 1993, 1994, 1995
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Mike Olson.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: bt_search.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/lock.h"
+#include "dbinc/mp.h"
+
+/*
+ * __bam_get_root --
+ *	Fetch the root of a tree and see if we want to keep
+ * it in the stack.
+ *
+ * PUBLIC: int __bam_get_root __P((DBC *, db_pgno_t, int, u_int32_t, int *));
+ */
+int
+__bam_get_root(dbc, pg, slevel, flags, stack)
+	DBC *dbc;
+	db_pgno_t pg;
+	int slevel;
+	u_int32_t flags;
+	int *stack;
+{
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DB_LOCK lock;
+	DB_MPOOLFILE *mpf;
+	PAGE *h;
+	db_lockmode_t lock_mode;
+	int ret, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	/*
+	 * If write-locking pages, we need to know whether or not to acquire a
+	 * write lock on a page before getting it.  This depends on how deep it
+	 * is in tree, which we don't know until we acquire the root page.  So,
+	 * if we need to lock the root page we may have to upgrade it later,
+	 * because we won't get the correct lock initially.
+	 *
+	 * Retrieve the root page.
+	 */
+try_again:
+	*stack = LF_ISSET(SR_STACK) &&
+	      (dbc->dbtype == DB_RECNO || F_ISSET(cp, C_RECNUM));
+	lock_mode = DB_LOCK_READ;
+	if (*stack ||
+	    LF_ISSET(SR_DEL) || (LF_ISSET(SR_NEXT) && LF_ISSET(SR_WRITE)))
+		lock_mode = DB_LOCK_WRITE;
+	if ((ret = __db_lget(dbc, 0, pg, lock_mode, 0, &lock)) != 0)
+		return (ret);
+	if ((ret = __memp_fget(mpf, &pg,
+	     dbc->thread_info, dbc->txn, 0, &h)) != 0) {
+		/* Did not read it, so we can release the lock */
+		(void)__LPUT(dbc, lock);
+		return (ret);
+	}
+
+	/*
+	 * Decide if we need to save this page; if we do, write lock it.
+	 * We deliberately don't lock-couple on this call.  If the tree
+	 * is tiny, i.e., one page, and two threads are busily updating
+	 * the root page, we're almost guaranteed deadlocks galore, as
+	 * each one gets a read lock and then blocks the other's attempt
+	 * for a write lock.
+	 */
+	if (!*stack &&
+	    ((LF_ISSET(SR_PARENT) && (u_int8_t)(slevel + 1) >= LEVEL(h)) ||
+	    (LF_ISSET(SR_WRITE) && LEVEL(h) == LEAFLEVEL) ||
+	    (LF_ISSET(SR_START) && slevel == LEVEL(h)))) {
+		if (!STD_LOCKING(dbc))
+			goto no_relock;
+		ret = __memp_fput(mpf, dbc->thread_info, h, dbc->priority);
+		if ((t_ret = __LPUT(dbc, lock)) != 0 && ret == 0)
+			ret = t_ret;
+		if (ret != 0)
+			return (ret);
+		lock_mode = DB_LOCK_WRITE;
+		if ((ret = __db_lget(dbc, 0, pg, lock_mode, 0, &lock)) != 0)
+			return (ret);
+		if ((ret = __memp_fget(mpf, &pg,
+		     dbc->thread_info, dbc->txn, 0, &h)) != 0) {
+			/* Did not read it, so we can release the lock */
+			(void)__LPUT(dbc, lock);
+			return (ret);
+		}
+		if (!((LF_ISSET(SR_PARENT) &&
+		    (u_int8_t)(slevel + 1) >= LEVEL(h)) ||
+		    (LF_ISSET(SR_WRITE) && LEVEL(h) == LEAFLEVEL) ||
+		    (LF_ISSET(SR_START) && slevel == LEVEL(h)))) {
+			/* Someone else split the root, start over. */
+			ret = __memp_fput(mpf,
+			    dbc->thread_info, h, dbc->priority);
+			if ((t_ret = __LPUT(dbc, lock)) != 0 && ret == 0)
+				ret = t_ret;
+			if (ret != 0)
+				return (ret);
+			goto try_again;
+		}
+no_relock:	*stack = 1;
+	}
+	BT_STK_ENTER(dbp->env, cp, h, 0, lock, lock_mode, ret);
+
+	return (ret);
+}
+
+/*
+ * __bam_search --
+ *	Search a btree for a key.
+ *
+ * PUBLIC: int __bam_search __P((DBC *, db_pgno_t,
+ * PUBLIC:     const DBT *, u_int32_t, int, db_recno_t *, int *));
+ */
+int
+__bam_search(dbc, root_pgno, key, flags, slevel, recnop, exactp)
+	DBC *dbc;
+	db_pgno_t root_pgno;
+	const DBT *key;
+	u_int32_t flags;
+	int slevel, *exactp;
+	db_recno_t *recnop;
+{
+	BTREE *t;
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DB_LOCK lock;
+	DB_MPOOLFILE *mpf;
+	ENV *env;
+	PAGE *h;
+	db_indx_t base, i, indx, *inp, lim;
+	db_lockmode_t lock_mode;
+	db_pgno_t pg;
+	db_recno_t recno;
+	int adjust, cmp, deloffset, ret, set_stack, stack, t_ret;
+	int (*func) __P((DB *, const DBT *, const DBT *));
+
+	dbp = dbc->dbp;
+	env = dbp->env;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+	h = NULL;
+	t = dbp->bt_internal;
+	recno = 0;
+	set_stack = 0;
+
+	BT_STK_CLR(cp);
+
+	/*
+	 * There are several ways we search a btree tree.  The flags argument
+	 * specifies if we're acquiring read or write locks, if we position
+	 * to the first or last item in a set of duplicates, if we return
+	 * deleted items, and if we are locking pairs of pages.  In addition,
+	 * if we're modifying record numbers, we have to lock the entire tree
+	 * regardless.  See btree.h for more details.
+	 */
+
+	if (root_pgno == PGNO_INVALID)
+		root_pgno = cp->root;
+	if ((ret = __bam_get_root(dbc, root_pgno, slevel, flags, &stack)) != 0)
+		return (ret);
+	lock_mode = cp->csp->lock_mode;
+	lock = cp->csp->lock;
+	h = cp->csp->page;
+
+	BT_STK_CLR(cp);
+
+	/* Choose a comparison function. */
+	func = F_ISSET(dbc, DBC_OPD) ?
+	    (dbp->dup_compare == NULL ? __bam_defcmp : dbp->dup_compare) :
+	    t->bt_compare;
+
+	for (;;) {
+		inp = P_INP(dbp, h);
+		adjust = TYPE(h) == P_LBTREE ? P_INDX : O_INDX;
+		if (LF_ISSET(SR_MIN | SR_MAX)) {
+			if (LF_ISSET(SR_MIN) || NUM_ENT(h) == 0)
+				indx = 0;
+			else if (TYPE(h) == P_LBTREE)
+				indx = NUM_ENT(h) - 2;
+			else
+				indx = NUM_ENT(h) - 1;
+
+			if (LEVEL(h) == LEAFLEVEL ||
+			     (!LF_ISSET(SR_START) && LEVEL(h) == slevel)) {
+				if (LF_ISSET(SR_NEXT))
+					goto get_next;
+				goto found;
+			}
+			goto next;
+		}
+		/*
+		 * Do a binary search on the current page.  If we're searching
+		 * a Btree leaf page, we have to walk the indices in groups of
+		 * two.  If we're searching an internal page or a off-page dup
+		 * page, they're an index per page item.  If we find an exact
+		 * match on a leaf page, we're done.
+		 */
+		DB_BINARY_SEARCH_FOR(base, lim, h, adjust) {
+			DB_BINARY_SEARCH_INCR(indx, base, lim, adjust);
+			if ((ret = __bam_cmp(dbp, dbc->thread_info,
+			     dbc->txn, key, h, indx, func, &cmp)) != 0)
+				goto err;
+			if (cmp == 0) {
+				if (LEVEL(h) == LEAFLEVEL ||
+				    (!LF_ISSET(SR_START) &&
+				    LEVEL(h) == slevel)) {
+					if (LF_ISSET(SR_NEXT))
+						goto get_next;
+					goto found;
+				}
+				goto next;
+			}
+			if (cmp > 0)
+				DB_BINARY_SEARCH_SHIFT_BASE(indx, base,
+				    lim, adjust);
+		}
+
+		/*
+		 * No match found.  Base is the smallest index greater than
+		 * key and may be zero or a last + O_INDX index.
+		 *
+		 * If it's a leaf page or the stopping point,
+		 * return base as the "found" value.
+		 * Delete only deletes exact matches.
+		 */
+		if (LEVEL(h) == LEAFLEVEL ||
+		    (!LF_ISSET(SR_START) && LEVEL(h) == slevel)) {
+			*exactp = 0;
+
+			if (LF_ISSET(SR_EXACT)) {
+				ret = DB_NOTFOUND;
+				goto err;
+			}
+
+			if (LF_ISSET(SR_STK_ONLY)) {
+				BT_STK_NUM(env, cp, h, base, ret);
+				if ((t_ret =
+				    __LPUT(dbc, lock)) != 0 && ret == 0)
+					ret = t_ret;
+				if ((t_ret = __memp_fput(mpf, dbc->thread_info,
+				     h, dbc->priority)) != 0 && ret == 0)
+					ret = t_ret;
+				return (ret);
+			}
+			if (LF_ISSET(SR_NEXT)) {
+get_next:			/*
+				 * The caller could have asked for a NEXT
+				 * at the root if the tree recently collapsed.
+				 */
+				if (PGNO(h) == root_pgno) {
+					ret = DB_NOTFOUND;
+					goto err;
+				}
+				/*
+				 * Save the root of the subtree
+				 * and drop the rest of the subtree
+				 * and search down again starting at
+				 * the next child.
+				 */
+				if ((ret = __LPUT(dbc, lock)) != 0)
+					goto err;
+				if ((ret = __memp_fput(mpf,
+				    dbc->thread_info, h, dbc->priority)) != 0)
+					goto err;
+				h = NULL;
+				LF_SET(SR_MIN);
+				LF_CLR(SR_NEXT);
+				indx = cp->sp->indx + 1;
+				if (indx == NUM_ENT(cp->sp->page)) {
+					ret = DB_NOTFOUND;
+					cp->csp++;
+					goto err;
+				}
+				h = cp->sp->page;
+				cp->sp->page = NULL;
+				lock = cp->sp->lock;
+				LOCK_INIT(cp->sp->lock);
+				if ((ret = __bam_stkrel(dbc, STK_NOLOCK)) != 0)
+					goto err;
+				stack = 1;
+				goto next;
+			}
+
+			/*
+			 * !!!
+			 * Possibly returning a deleted record -- DB_SET_RANGE,
+			 * DB_KEYFIRST and DB_KEYLAST don't require an exact
+			 * match, and we don't want to walk multiple pages here
+			 * to find an undeleted record.  This is handled by the
+			 * calling routine.
+			 */
+			if (LF_ISSET(SR_DEL) && cp->csp == cp->sp)
+				cp->csp++;
+			BT_STK_ENTER(env, cp, h, base, lock, lock_mode, ret);
+			if (ret != 0)
+				goto err;
+			return (0);
+		}
+
+		/*
+		 * If it's not a leaf page, record the internal page (which is
+		 * a parent page for the key).  Decrement the base by 1 if it's
+		 * non-zero so that if a split later occurs, the inserted page
+		 * will be to the right of the saved page.
+		 */
+		indx = base > 0 ? base - O_INDX : base;
+
+		/*
+		 * If we're trying to calculate the record number, sum up
+		 * all the record numbers on this page up to the indx point.
+		 */
+next:		if (recnop != NULL)
+			for (i = 0; i < indx; ++i)
+				recno += GET_BINTERNAL(dbp, h, i)->nrecs;
+
+		pg = GET_BINTERNAL(dbp, h, indx)->pgno;
+
+		/* See if we are at the level to start stacking. */
+		if (LF_ISSET(SR_START) && slevel == LEVEL(h))
+			stack = 1;
+
+		if (LF_ISSET(SR_STK_ONLY)) {
+			if (slevel == LEVEL(h)) {
+				BT_STK_NUM(env, cp, h, indx, ret);
+				if ((t_ret =
+				    __LPUT(dbc, lock)) != 0 && ret == 0)
+					ret = t_ret;
+				if ((t_ret = __memp_fput(mpf, dbc->thread_info,
+				    h, dbc->priority)) != 0 && ret == 0)
+					ret = t_ret;
+				return (ret);
+			}
+			BT_STK_NUMPUSH(env, cp, h, indx, ret);
+			(void)__memp_fput(mpf,
+			    dbc->thread_info, h, dbc->priority);
+			h = NULL;
+			if ((ret = __db_lget(dbc,
+			    LCK_COUPLE_ALWAYS, pg, lock_mode, 0, &lock)) != 0) {
+				/*
+				 * Discard our lock and return on failure.  This
+				 * is OK because it only happens when descending
+				 * the tree holding read-locks.
+				 */
+				(void)__LPUT(dbc, lock);
+				return (ret);
+			}
+		} else if (stack) {
+			/* Return if this is the lowest page wanted. */
+			if (LF_ISSET(SR_PARENT) && slevel == LEVEL(h)) {
+				BT_STK_ENTER(env,
+				    cp, h, indx, lock, lock_mode, ret);
+				if (ret != 0)
+					goto err;
+				return (0);
+			}
+			if (LF_ISSET(SR_DEL) && NUM_ENT(h) > 1) {
+				/*
+				 * There was a page with a singleton pointer
+				 * to a non-empty subtree.
+				 */
+				cp->csp--;
+				if ((ret = __bam_stkrel(dbc, STK_NOLOCK)) != 0)
+					goto err;
+				set_stack = stack = 0;
+				goto do_del;
+			}
+			BT_STK_PUSH(env,
+			    cp, h, indx, lock, lock_mode, ret);
+			if (ret != 0)
+				goto err;
+			h = NULL;
+
+			lock_mode = DB_LOCK_WRITE;
+			if ((ret =
+			    __db_lget(dbc, 0, pg, lock_mode, 0, &lock)) != 0)
+				goto err;
+		} else {
+			/*
+			 * Decide if we want to return a reference to the next
+			 * page in the return stack.  If so, lock it and never
+			 * unlock it.  We will want to stack things on the
+			 * next iteration.  The stack variable cannot be
+			 * set until we leave this clause.
+			 */
+			if ((LF_ISSET(SR_PARENT) &&
+			    (u_int8_t)(slevel + 1) >= (LEVEL(h) - 1)) ||
+			    (LEVEL(h) - 1) == LEAFLEVEL)
+				set_stack = 1;
+
+			/*
+			 * Returning a subtree.  See if we have hit the start
+			 * point if so save the parent and set stack.
+			 * Otherwise free the parent and temporarily
+			 * save this one.
+			 * For SR_DEL we need to find a page with 1 entry.
+			 * For SR_NEXT we want find the minimal subtree
+			 * that contains the key and the next page.
+			 * We save pages as long as we are at the right
+			 * edge of the subtree.  When we leave the right
+			 * edge, then drop the subtree.
+			 */
+			if (!LF_ISSET(SR_DEL | SR_NEXT)) {
+				if ((ret = __memp_fput(mpf,
+				    dbc->thread_info, h, dbc->priority)) != 0)
+					goto err;
+				goto lock_next;
+			}
+
+			if ((LF_ISSET(SR_DEL) && NUM_ENT(h) == 1)) {
+				/*
+				 * We are pushing the things on the stack,
+				 * set the stack variable now to indicate this
+				 * has happened.
+				 */
+				stack = set_stack = 1;
+				LF_SET(SR_WRITE);
+				/* Push the parent. */
+				cp->csp++;
+				/* Push this node. */
+				BT_STK_PUSH(env, cp, h,
+				     indx, lock, lock_mode, ret);
+				if (ret != 0)
+					goto err;
+				LOCK_INIT(lock);
+			} else {
+			/*
+			 * See if we want to save the tree so far.
+			 * If we are looking for the next key,
+			 * then we must save this node if we are
+			 * at the end of the page.  If not then
+			 * discard anything we have saved so far.
+			 * For delete only keep one node until
+			 * we find a singleton.
+			 */
+do_del:				if (cp->csp->page != NULL) {
+					if (LF_ISSET(SR_NEXT) &&
+					     indx == NUM_ENT(h) - 1)
+						cp->csp++;
+					else if ((ret =
+					    __bam_stkrel(dbc, STK_NOLOCK)) != 0)
+						goto err;
+				}
+				/* Save this node. */
+				BT_STK_ENTER(env, cp,
+				    h, indx, lock, lock_mode, ret);
+				if (ret != 0)
+					goto err;
+				LOCK_INIT(lock);
+			}
+
+lock_next:		h = NULL;
+
+			if (set_stack && LF_ISSET(SR_WRITE))
+				lock_mode = DB_LOCK_WRITE;
+			if ((ret = __db_lget(dbc,
+			    LCK_COUPLE_ALWAYS, pg, lock_mode, 0, &lock)) != 0) {
+				/*
+				 * If we fail, discard the lock we held.  This
+				 * is OK because this only happens when we are
+				 * descending the tree holding read-locks.
+				 */
+				(void)__LPUT(dbc, lock);
+				if (LF_ISSET(SR_DEL | SR_NEXT) && !stack)
+					cp->csp++;
+				goto err;
+			}
+			stack = set_stack;
+		}
+		if ((ret = __memp_fget(mpf, &pg,
+		     dbc->thread_info, dbc->txn, 0, &h)) != 0)
+			goto err;
+	}
+	/* NOTREACHED */
+
+found:	*exactp = 1;
+
+	/*
+	 * If we got here, we know that we have a Btree leaf or off-page
+	 * duplicates page.  If it's a Btree leaf page, we have to handle
+	 * on-page duplicates.
+	 *
+	 * If there are duplicates, go to the first/last one.  This is
+	 * safe because we know that we're not going to leave the page,
+	 * all duplicate sets that are not on overflow pages exist on a
+	 * single leaf page.
+	 */
+	if (TYPE(h) == P_LBTREE && NUM_ENT(h) > P_INDX) {
+		if (LF_ISSET(SR_DUPLAST))
+			while (indx < (db_indx_t)(NUM_ENT(h) - P_INDX) &&
+			    inp[indx] == inp[indx + P_INDX])
+				indx += P_INDX;
+		else if (LF_ISSET(SR_DUPFIRST))
+			while (indx > 0 &&
+			    inp[indx] == inp[indx - P_INDX])
+				indx -= P_INDX;
+	}
+
+	/*
+	 * Now check if we are allowed to return deleted items; if not, then
+	 * find the next (or previous) non-deleted duplicate entry.  (We do
+	 * not move from the original found key on the basis of the SR_DELNO
+	 * flag.)
+	 */
+	DB_ASSERT(env, recnop == NULL || LF_ISSET(SR_DELNO));
+	if (LF_ISSET(SR_DELNO)) {
+		deloffset = TYPE(h) == P_LBTREE ? O_INDX : 0;
+		if (LF_ISSET(SR_DUPLAST))
+			while (B_DISSET(GET_BKEYDATA(dbp,
+			    h, indx + deloffset)->type) && indx > 0 &&
+			    inp[indx] == inp[indx - adjust])
+				indx -= adjust;
+		else
+			while (B_DISSET(GET_BKEYDATA(dbp,
+			    h, indx + deloffset)->type) &&
+			    indx < (db_indx_t)(NUM_ENT(h) - adjust) &&
+			    inp[indx] == inp[indx + adjust])
+				indx += adjust;
+
+		/*
+		 * If we weren't able to find a non-deleted duplicate, return
+		 * DB_NOTFOUND.
+		 */
+		if (B_DISSET(GET_BKEYDATA(dbp, h, indx + deloffset)->type)) {
+			ret = DB_NOTFOUND;
+			goto err;
+		}
+
+		/*
+		 * Increment the record counter to point to the found element.
+		 * Ignore any deleted key/data pairs.  There doesn't need to
+		 * be any correction for duplicates, as Btree doesn't support
+		 * duplicates and record numbers in the same tree.
+		 */
+		if (recnop != NULL) {
+			DB_ASSERT(env, TYPE(h) == P_LBTREE);
+
+			for (i = 0; i < indx; i += P_INDX)
+				if (!B_DISSET(
+				    GET_BKEYDATA(dbp, h, i + O_INDX)->type))
+					++recno;
+
+			/* Correct the number for a 0-base. */
+			*recnop = recno + 1;
+		}
+	}
+
+	if (LF_ISSET(SR_STK_ONLY)) {
+		BT_STK_NUM(env, cp, h, indx, ret);
+		if ((t_ret = __LPUT(dbc, lock)) != 0 && ret == 0)
+			ret = t_ret;
+		if ((t_ret = __memp_fput(mpf,
+		     dbc->thread_info, h, dbc->priority)) != 0 && ret == 0)
+			ret = t_ret;
+	} else {
+		if (LF_ISSET(SR_DEL) && cp->csp == cp->sp)
+			cp->csp++;
+		BT_STK_ENTER(env, cp, h, indx, lock, lock_mode, ret);
+	}
+	if (ret != 0)
+		goto err;
+
+	return (0);
+
+err:	if (h != NULL && (t_ret = __memp_fput(mpf,
+	    dbc->thread_info, h, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+
+	/* Keep any not-found page locked for serializability. */
+	if ((t_ret = __TLPUT(dbc, lock)) != 0 && ret == 0)
+		ret = t_ret;
+
+	BT_STK_POP(cp);
+	__bam_stkrel(dbc, 0);
+
+	return (ret);
+}
+
+/*
+ * __bam_stkrel --
+ *	Release all pages currently held in the stack.
+ *
+ * PUBLIC: int __bam_stkrel __P((DBC *, u_int32_t));
+ */
+int
+__bam_stkrel(dbc, flags)
+	DBC *dbc;
+	u_int32_t flags;
+{
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DB_MPOOLFILE *mpf;
+	EPG *epg;
+	int ret, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	cp = (BTREE_CURSOR *)dbc->internal;
+
+	/*
+	 * Release inner pages first.
+	 *
+	 * The caller must be sure that setting STK_NOLOCK will not effect
+	 * either serializability or recoverability.
+	 */
+	for (ret = 0, epg = cp->sp; epg <= cp->csp; ++epg) {
+		if (epg->page != NULL) {
+			if (LF_ISSET(STK_CLRDBC) && cp->page == epg->page) {
+				cp->page = NULL;
+				LOCK_INIT(cp->lock);
+			}
+			if ((t_ret = __memp_fput(mpf, dbc->thread_info,
+			     epg->page, dbc->priority)) != 0 && ret == 0)
+				ret = t_ret;
+			/*
+			 * XXX
+			 * Temporary fix for #3243 -- under certain deadlock
+			 * conditions we call here again and re-free the page.
+			 * The correct fix is to never release a stack that
+			 * doesn't hold items.
+			 */
+			epg->page = NULL;
+		}
+		/*
+		 * We set this if we need to release our pins,
+		 * but are not logically ready to have the pages
+		 * visible.
+		 */
+		if (LF_ISSET(STK_PGONLY))
+			continue;
+		if (LF_ISSET(STK_NOLOCK)) {
+			if ((t_ret = __LPUT(dbc, epg->lock)) != 0 && ret == 0)
+				ret = t_ret;
+		} else
+			if ((t_ret = __TLPUT(dbc, epg->lock)) != 0 && ret == 0)
+				ret = t_ret;
+	}
+
+	/* Clear the stack, all pages have been released. */
+	if (!LF_ISSET(STK_PGONLY))
+		BT_STK_CLR(cp);
+
+	return (ret);
+}
+
+/*
+ * __bam_stkgrow --
+ *	Grow the stack.
+ *
+ * PUBLIC: int __bam_stkgrow __P((ENV *, BTREE_CURSOR *));
+ */
+int
+__bam_stkgrow(env, cp)
+	ENV *env;
+	BTREE_CURSOR *cp;
+{
+	EPG *p;
+	size_t entries;
+	int ret;
+
+	entries = cp->esp - cp->sp;
+
+	if ((ret = __os_calloc(env, entries * 2, sizeof(EPG), &p)) != 0)
+		return (ret);
+	memcpy(p, cp->sp, entries * sizeof(EPG));
+	if (cp->sp != cp->stack)
+		__os_free(env, cp->sp);
+	cp->sp = p;
+	cp->csp = p + entries;
+	cp->esp = p + entries * 2;
+	return (0);
+}

btree/bt_stat.c

@@ -0,0 +1,656 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: bt_stat.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/lock.h"
+#include "dbinc/mp.h"
+
+#ifdef HAVE_STATISTICS
+/*
+ * __bam_stat --
+ *	Gather/print the btree statistics
+ *
+ * PUBLIC: int __bam_stat __P((DBC *, void *, u_int32_t));
+ */
+int
+__bam_stat(dbc, spp, flags)
+	DBC *dbc;
+	void *spp;
+	u_int32_t flags;
+{
+	BTMETA *meta;
+	BTREE *t;
+	BTREE_CURSOR *cp;
+	DB *dbp;
+	DB_BTREE_STAT *sp;
+	DB_LOCK lock, metalock;
+	DB_MPOOLFILE *mpf;
+	ENV *env;
+	PAGE *h;
+	db_pgno_t pgno;
+	int ret, t_ret, write_meta;
+
+	dbp = dbc->dbp;
+	env = dbp->env;
+
+	meta = NULL;
+	t = dbp->bt_internal;
+	sp = NULL;
+	LOCK_INIT(metalock);
+	LOCK_INIT(lock);
+	mpf = dbp->mpf;
+	h = NULL;
+	ret = write_meta = 0;
+
+	cp = (BTREE_CURSOR *)dbc->internal;
+
+	/* Allocate and clear the structure. */
+	if ((ret = __os_umalloc(env, sizeof(*sp), &sp)) != 0)
+		goto err;
+	memset(sp, 0, sizeof(*sp));
+
+	/* Get the metadata page for the entire database. */
+	pgno = PGNO_BASE_MD;
+	if ((ret = __db_lget(dbc, 0, pgno, DB_LOCK_READ, 0, &metalock)) != 0)
+		goto err;
+	if ((ret = __memp_fget(mpf, &pgno,
+	     dbc->thread_info, dbc->txn, 0, &meta)) != 0)
+		goto err;
+
+	if (flags == DB_FAST_STAT)
+		goto meta_only;
+
+	/* Walk the metadata free list, counting pages. */
+	for (sp->bt_free = 0, pgno = meta->dbmeta.free; pgno != PGNO_INVALID;) {
+		++sp->bt_free;
+
+		if ((ret = __memp_fget(mpf, &pgno,
+		     dbc->thread_info, dbc->txn, 0, &h)) != 0)
+			goto err;
+
+		pgno = h->next_pgno;
+		if ((ret = __memp_fput(mpf,
+		    dbc->thread_info, h, dbc->priority)) != 0)
+			goto err;
+		h = NULL;
+	}
+
+	/* Get the root page. */
+	pgno = cp->root;
+	if ((ret = __db_lget(dbc, 0, pgno, DB_LOCK_READ, 0, &lock)) != 0)
+		goto err;
+	if ((ret = __memp_fget(mpf, &pgno,
+	     dbc->thread_info, dbc->txn, 0, &h)) != 0)
+		goto err;
+
+	/* Get the levels from the root page. */
+	sp->bt_levels = h->level;
+
+	/* Discard the root page. */
+	ret = __memp_fput(mpf, dbc->thread_info, h, dbc->priority);
+	h = NULL;
+	if ((t_ret = __LPUT(dbc, lock)) != 0 && ret == 0)
+		ret = t_ret;
+	if (ret != 0)
+		goto err;
+
+	/* Walk the tree. */
+	if ((ret = __bam_traverse(dbc,
+	    DB_LOCK_READ, cp->root, __bam_stat_callback, sp)) != 0)
+		goto err;
+
+	/*
+	 * Get the subdatabase metadata page if it's not the same as the
+	 * one we already have.
+	 */
+	write_meta = !F_ISSET(dbp, DB_AM_RDONLY) &&
+	    (!MULTIVERSION(dbp) || dbc->txn != NULL);
+meta_only:
+	if (t->bt_meta != PGNO_BASE_MD || write_meta) {
+		ret = __memp_fput(mpf, dbc->thread_info, meta, dbc->priority);
+		meta = NULL;
+		if ((t_ret = __LPUT(dbc, metalock)) != 0 && ret == 0)
+			ret = t_ret;
+		if (ret != 0)
+			goto err;
+
+		if ((ret = __db_lget(dbc,
+		    0, t->bt_meta, write_meta ? DB_LOCK_WRITE : DB_LOCK_READ,
+		    0, &metalock)) != 0)
+			goto err;
+		if ((ret = __memp_fget(mpf, &t->bt_meta,
+		     dbc->thread_info, dbc->txn,
+		    write_meta ? DB_MPOOL_DIRTY : 0, &meta)) != 0)
+			goto err;
+	}
+	if (flags == DB_FAST_STAT) {
+		if (dbp->type == DB_RECNO ||
+		    (dbp->type == DB_BTREE && F_ISSET(dbp, DB_AM_RECNUM))) {
+			if ((ret = __db_lget(dbc, 0,
+			    cp->root, DB_LOCK_READ, 0, &lock)) != 0)
+				goto err;
+			if ((ret = __memp_fget(mpf, &cp->root,
+			     dbc->thread_info, dbc->txn, 0, &h)) != 0)
+				goto err;
+
+			sp->bt_nkeys = RE_NREC(h);
+		} else
+			sp->bt_nkeys = meta->dbmeta.key_count;
+
+		sp->bt_ndata = dbp->type == DB_RECNO ?
+		   sp->bt_nkeys : meta->dbmeta.record_count;
+	}
+
+	/* Get metadata page statistics. */
+	sp->bt_metaflags = meta->dbmeta.flags;
+	sp->bt_minkey = meta->minkey;
+	sp->bt_re_len = meta->re_len;
+	sp->bt_re_pad = meta->re_pad;
+	/*
+	 * Don't take the page number from the meta-data page -- that value is
+	 * only maintained in the primary database, we may have been called on
+	 * a subdatabase.  (Yes, I read the primary database meta-data page
+	 * earlier in this function, but I'm asking the underlying cache so the
+	 * code for the Hash and Btree methods is the same.)
+	 */
+	if ((ret = __memp_get_last_pgno(dbp->mpf, &pgno)) != 0)
+		goto err;
+	sp->bt_pagecnt = pgno + 1;
+	sp->bt_pagesize = meta->dbmeta.pagesize;
+	sp->bt_magic = meta->dbmeta.magic;
+	sp->bt_version = meta->dbmeta.version;
+
+	if (write_meta != 0) {
+		meta->dbmeta.key_count = sp->bt_nkeys;
+		meta->dbmeta.record_count = sp->bt_ndata;
+	}
+
+	*(DB_BTREE_STAT **)spp = sp;
+
+err:	/* Discard the second page. */
+	if ((t_ret = __LPUT(dbc, lock)) != 0 && ret == 0)
+		ret = t_ret;
+	if (h != NULL && (t_ret = __memp_fput(mpf,
+	    dbc->thread_info, h, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+
+	/* Discard the metadata page. */
+	if ((t_ret = __LPUT(dbc, metalock)) != 0 && ret == 0)
+		ret = t_ret;
+	if (meta != NULL && (t_ret = __memp_fput(mpf,
+	    dbc->thread_info, meta, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+
+	if (ret != 0 && sp != NULL) {
+		__os_ufree(env, sp);
+		*(DB_BTREE_STAT **)spp = NULL;
+	}
+
+	return (ret);
+}
+
+/*
+ * __bam_stat_print --
+ *	Display btree/recno statistics.
+ *
+ * PUBLIC: int __bam_stat_print __P((DBC *, u_int32_t));
+ */
+int
+__bam_stat_print(dbc, flags)
+	DBC *dbc;
+	u_int32_t flags;
+{
+	static const FN fn[] = {
+		{ BTM_DUP,	"duplicates" },
+		{ BTM_RECNO,	"recno" },
+		{ BTM_RECNUM,	"record-numbers" },
+		{ BTM_FIXEDLEN,	"fixed-length" },
+		{ BTM_RENUMBER,	"renumber" },
+		{ BTM_SUBDB,	"multiple-databases" },
+		{ BTM_DUPSORT,	"sorted duplicates" },
+		{ 0,		NULL }
+	};
+	DB *dbp;
+	DB_BTREE_STAT *sp;
+	ENV *env;
+	int lorder, ret;
+	const char *s;
+
+	dbp = dbc->dbp;
+	env = dbp->env;
+
+	if ((ret = __bam_stat(dbc, &sp, LF_ISSET(DB_FAST_STAT))) != 0)
+		return (ret);
+
+	if (LF_ISSET(DB_STAT_ALL)) {
+		__db_msg(env, "%s", DB_GLOBAL(db_line));
+		__db_msg(env, "Default Btree/Recno database information:");
+	}
+
+	__db_msg(env, "%lx\tBtree magic number", (u_long)sp->bt_magic);
+	__db_msg(env, "%lu\tBtree version number", (u_long)sp->bt_version);
+
+	(void)__db_get_lorder(dbp, &lorder);
+	switch (lorder) {
+	case 1234:
+		s = "Little-endian";
+		break;
+	case 4321:
+		s = "Big-endian";
+		break;
+	default:
+		s = "Unrecognized byte order";
+		break;
+	}
+	__db_msg(env, "%s\tByte order", s);
+	__db_prflags(env, NULL, sp->bt_metaflags, fn, NULL, "\tFlags");
+	if (dbp->type == DB_BTREE)
+		__db_dl(env, "Minimum keys per-page", (u_long)sp->bt_minkey);
+	if (dbp->type == DB_RECNO) {
+		__db_dl(env,
+		    "Fixed-length record size", (u_long)sp->bt_re_len);
+		__db_msg(env,
+		    "%#x\tFixed-length record pad", (u_int)sp->bt_re_pad);
+	}
+	__db_dl(env,
+	    "Underlying database page size", (u_long)sp->bt_pagesize);
+	if (dbp->type == DB_BTREE)
+		__db_dl(env, "Overflow key/data size",
+		    ((BTREE_CURSOR *)dbc->internal)->ovflsize);
+	__db_dl(env, "Number of levels in the tree", (u_long)sp->bt_levels);
+	__db_dl(env, dbp->type == DB_BTREE ?
+	    "Number of unique keys in the tree" :
+	    "Number of records in the tree", (u_long)sp->bt_nkeys);
+	__db_dl(env,
+	    "Number of data items in the tree", (u_long)sp->bt_ndata);
+
+	__db_dl(env,
+	    "Number of tree internal pages", (u_long)sp->bt_int_pg);
+	__db_dl_pct(env,
+	    "Number of bytes free in tree internal pages",
+	    (u_long)sp->bt_int_pgfree,
+	    DB_PCT_PG(sp->bt_int_pgfree, sp->bt_int_pg, sp->bt_pagesize), "ff");
+
+	__db_dl(env,
+	    "Number of tree leaf pages", (u_long)sp->bt_leaf_pg);
+	__db_dl_pct(env, "Number of bytes free in tree leaf pages",
+	    (u_long)sp->bt_leaf_pgfree, DB_PCT_PG(
+	    sp->bt_leaf_pgfree, sp->bt_leaf_pg, sp->bt_pagesize), "ff");
+
+	__db_dl(env,
+	    "Number of tree duplicate pages", (u_long)sp->bt_dup_pg);
+	__db_dl_pct(env,
+	    "Number of bytes free in tree duplicate pages",
+	    (u_long)sp->bt_dup_pgfree,
+	    DB_PCT_PG(sp->bt_dup_pgfree, sp->bt_dup_pg, sp->bt_pagesize), "ff");
+
+	__db_dl(env,
+	    "Number of tree overflow pages", (u_long)sp->bt_over_pg);
+	__db_dl_pct(env, "Number of bytes free in tree overflow pages",
+	    (u_long)sp->bt_over_pgfree, DB_PCT_PG(
+	    sp->bt_over_pgfree, sp->bt_over_pg, sp->bt_pagesize), "ff");
+	__db_dl(env, "Number of empty pages", (u_long)sp->bt_empty_pg);
+
+	__db_dl(env, "Number of pages on the free list", (u_long)sp->bt_free);
+
+	__os_ufree(env, sp);
+
+	return (0);
+}
+
+/*
+ * __bam_stat_callback --
+ *	Statistics callback.
+ *
+ * PUBLIC: int __bam_stat_callback __P((DBC *, PAGE *, void *, int *));
+ */
+int
+__bam_stat_callback(dbc, h, cookie, putp)
+	DBC *dbc;
+	PAGE *h;
+	void *cookie;
+	int *putp;
+{
+	DB *dbp;
+	DB_BTREE_STAT *sp;
+	db_indx_t indx, *inp, top;
+	u_int8_t type;
+
+	dbp = dbc->dbp;
+	sp = cookie;
+	*putp = 0;
+	top = NUM_ENT(h);
+	inp = P_INP(dbp, h);
+
+	switch (TYPE(h)) {
+	case P_IBTREE:
+	case P_IRECNO:
+		++sp->bt_int_pg;
+		sp->bt_int_pgfree += P_FREESPACE(dbp, h);
+		break;
+	case P_LBTREE:
+		if (top == 0)
+			++sp->bt_empty_pg;
+
+		/* Correct for on-page duplicates and deleted items. */
+		for (indx = 0; indx < top; indx += P_INDX) {
+			type = GET_BKEYDATA(dbp, h, indx + O_INDX)->type;
+			/* Ignore deleted items. */
+			if (B_DISSET(type))
+				continue;
+
+			/* Ignore duplicate keys. */
+			if (indx + P_INDX >= top ||
+			    inp[indx] != inp[indx + P_INDX])
+				++sp->bt_nkeys;
+
+			/* Ignore off-page duplicates. */
+			if (B_TYPE(type) != B_DUPLICATE)
+				++sp->bt_ndata;
+		}
+
+		++sp->bt_leaf_pg;
+		sp->bt_leaf_pgfree += P_FREESPACE(dbp, h);
+		break;
+	case P_LRECNO:
+		if (top == 0)
+			++sp->bt_empty_pg;
+
+		/*
+		 * If walking a recno tree, then each of these items is a key.
+		 * Otherwise, we're walking an off-page duplicate set.
+		 */
+		if (dbp->type == DB_RECNO) {
+			/*
+			 * Correct for deleted items in non-renumbering Recno
+			 * databases.
+			 */
+			if (F_ISSET(dbp, DB_AM_RENUMBER)) {
+				sp->bt_nkeys += top;
+				sp->bt_ndata += top;
+			} else
+				for (indx = 0; indx < top; indx += O_INDX) {
+					type = GET_BKEYDATA(dbp, h, indx)->type;
+					if (!B_DISSET(type)) {
+						++sp->bt_ndata;
+						++sp->bt_nkeys;
+					}
+				}
+
+			++sp->bt_leaf_pg;
+			sp->bt_leaf_pgfree += P_FREESPACE(dbp, h);
+		} else {
+			sp->bt_ndata += top;
+
+			++sp->bt_dup_pg;
+			sp->bt_dup_pgfree += P_FREESPACE(dbp, h);
+		}
+		break;
+	case P_LDUP:
+		if (top == 0)
+			++sp->bt_empty_pg;
+
+		/* Correct for deleted items. */
+		for (indx = 0; indx < top; indx += O_INDX)
+			if (!B_DISSET(GET_BKEYDATA(dbp, h, indx)->type))
+				++sp->bt_ndata;
+
+		++sp->bt_dup_pg;
+		sp->bt_dup_pgfree += P_FREESPACE(dbp, h);
+		break;
+	case P_OVERFLOW:
+		++sp->bt_over_pg;
+		sp->bt_over_pgfree += P_OVFLSPACE(dbp, dbp->pgsize, h);
+		break;
+	default:
+		return (__db_pgfmt(dbp->env, h->pgno));
+	}
+	return (0);
+}
+
+/*
+ * __bam_print_cursor --
+ *	Display the current internal cursor.
+ *
+ * PUBLIC: void __bam_print_cursor __P((DBC *));
+ */
+void
+__bam_print_cursor(dbc)
+	DBC *dbc;
+{
+	static const FN fn[] = {
+		{ C_DELETED,	"C_DELETED" },
+		{ C_RECNUM,	"C_RECNUM" },
+		{ C_RENUMBER,	"C_RENUMBER" },
+		{ 0,		NULL }
+	};
+	ENV *env;
+	BTREE_CURSOR *cp;
+
+	env = dbc->env;
+	cp = (BTREE_CURSOR *)dbc->internal;
+
+	STAT_ULONG("Overflow size", cp->ovflsize);
+	if (dbc->dbtype == DB_RECNO)
+		STAT_ULONG("Recno", cp->recno);
+	STAT_ULONG("Order", cp->order);
+	__db_prflags(env, NULL, cp->flags, fn, NULL, "\tInternal Flags");
+}
+
+#else /* !HAVE_STATISTICS */
+
+int
+__bam_stat(dbc, spp, flags)
+	DBC *dbc;
+	void *spp;
+	u_int32_t flags;
+{
+	COMPQUIET(spp, NULL);
+	COMPQUIET(flags, 0);
+
+	return (__db_stat_not_built(dbc->env));
+}
+
+int
+__bam_stat_print(dbc, flags)
+	DBC *dbc;
+	u_int32_t flags;
+{
+	COMPQUIET(flags, 0);
+
+	return (__db_stat_not_built(dbc->env));
+}
+#endif
+
+#ifndef HAVE_BREW
+/*
+ * __bam_key_range --
+ *	Return proportion of keys relative to given key.  The numbers are
+ *	slightly skewed due to on page duplicates.
+ *
+ * PUBLIC: int __bam_key_range __P((DBC *, DBT *, DB_KEY_RANGE *, u_int32_t));
+ */
+int
+__bam_key_range(dbc, dbt, kp, flags)
+	DBC *dbc;
+	DBT *dbt;
+	DB_KEY_RANGE *kp;
+	u_int32_t flags;
+{
+	BTREE_CURSOR *cp;
+	EPG *sp;
+	double factor;
+	int exact, ret;
+
+	COMPQUIET(flags, 0);
+
+	if ((ret = __bam_search(dbc, PGNO_INVALID,
+	    dbt, SR_STK_ONLY, 1, NULL, &exact)) != 0)
+		return (ret);
+
+	cp = (BTREE_CURSOR *)dbc->internal;
+	kp->less = kp->greater = 0.0;
+
+	factor = 1.0;
+
+	/* Correct the leaf page. */
+	cp->csp->entries /= 2;
+	cp->csp->indx /= 2;
+	for (sp = cp->sp; sp <= cp->csp; ++sp) {
+		/*
+		 * At each level we know that pages greater than indx contain
+		 * keys greater than what we are looking for and those less
+		 * than indx are less than.  The one pointed to by indx may
+		 * have some less, some greater or even equal.  If indx is
+		 * equal to the number of entries, then the key is out of range
+		 * and everything is less.
+		 */
+		if (sp->indx == 0)
+			kp->greater += factor * (sp->entries - 1)/sp->entries;
+		else if (sp->indx == sp->entries)
+			kp->less += factor;
+		else {
+			kp->less += factor * sp->indx / sp->entries;
+			kp->greater += factor *
+			    ((sp->entries - sp->indx) - 1) / sp->entries;
+		}
+		factor *= 1.0/sp->entries;
+	}
+
+	/*
+	 * If there was an exact match then assign 1 n'th to the key itself.
+	 * Otherwise that factor belongs to those greater than the key, unless
+	 * the key was out of range.
+	 */
+	if (exact)
+		kp->equal = factor;
+	else {
+		if (kp->less != 1)
+			kp->greater += factor;
+		kp->equal = 0;
+	}
+
+	BT_STK_CLR(cp);
+
+	return (0);
+}
+#endif
+
+/*
+ * __bam_traverse --
+ *	Walk a Btree database.
+ *
+ * PUBLIC: int __bam_traverse __P((DBC *, db_lockmode_t,
+ * PUBLIC:     db_pgno_t, int (*)(DBC *, PAGE *, void *, int *), void *));
+ */
+int
+__bam_traverse(dbc, mode, root_pgno, callback, cookie)
+	DBC *dbc;
+	db_lockmode_t mode;
+	db_pgno_t root_pgno;
+	int (*callback)__P((DBC *, PAGE *, void *, int *));
+	void *cookie;
+{
+	BINTERNAL *bi;
+	BKEYDATA *bk;
+	DB *dbp;
+	DB_LOCK lock;
+	DB_MPOOLFILE *mpf;
+	PAGE *h;
+	RINTERNAL *ri;
+	db_indx_t indx, *inp;
+	int already_put, ret, t_ret;
+
+	dbp = dbc->dbp;
+	mpf = dbp->mpf;
+	already_put = 0;
+
+	if ((ret = __db_lget(dbc, 0, root_pgno, mode, 0, &lock)) != 0)
+		return (ret);
+	if ((ret = __memp_fget(mpf, &root_pgno,
+	     dbc->thread_info, dbc->txn, 0, &h)) != 0) {
+		(void)__TLPUT(dbc, lock);
+		return (ret);
+	}
+
+	switch (TYPE(h)) {
+	case P_IBTREE:
+		for (indx = 0; indx < NUM_ENT(h); indx += O_INDX) {
+			bi = GET_BINTERNAL(dbp, h, indx);
+			if (B_TYPE(bi->type) == B_OVERFLOW &&
+			    (ret = __db_traverse_big(dbc,
+			    ((BOVERFLOW *)bi->data)->pgno,
+			    callback, cookie)) != 0)
+				goto err;
+			if ((ret = __bam_traverse(
+			    dbc, mode, bi->pgno, callback, cookie)) != 0)
+				goto err;
+		}
+		break;
+	case P_IRECNO:
+		for (indx = 0; indx < NUM_ENT(h); indx += O_INDX) {
+			ri = GET_RINTERNAL(dbp, h, indx);
+			if ((ret = __bam_traverse(
+			    dbc, mode, ri->pgno, callback, cookie)) != 0)
+				goto err;
+		}
+		break;
+	case P_LBTREE:
+		inp = P_INP(dbp, h);
+		for (indx = 0; indx < NUM_ENT(h); indx += P_INDX) {
+			bk = GET_BKEYDATA(dbp, h, indx);
+			if (B_TYPE(bk->type) == B_OVERFLOW &&
+			    (indx + P_INDX >= NUM_ENT(h) ||
+			    inp[indx] != inp[indx + P_INDX])) {
+				if ((ret = __db_traverse_big(dbc,
+				    GET_BOVERFLOW(dbp, h, indx)->pgno,
+				    callback, cookie)) != 0)
+					goto err;
+			}
+			bk = GET_BKEYDATA(dbp, h, indx + O_INDX);
+			if (B_TYPE(bk->type) == B_DUPLICATE &&
+			    (ret = __bam_traverse(dbc, mode,
+			    GET_BOVERFLOW(dbp, h, indx + O_INDX)->pgno,
+			    callback, cookie)) != 0)
+				goto err;
+			if (B_TYPE(bk->type) == B_OVERFLOW &&
+			    (ret = __db_traverse_big(dbc,
+			    GET_BOVERFLOW(dbp, h, indx + O_INDX)->pgno,
+			    callback, cookie)) != 0)
+				goto err;
+		}
+		break;
+	case P_LDUP:
+	case P_LRECNO:
+		for (indx = 0; indx < NUM_ENT(h); indx += O_INDX) {
+			bk = GET_BKEYDATA(dbp, h, indx);
+			if (B_TYPE(bk->type) == B_OVERFLOW &&
+			    (ret = __db_traverse_big(dbc,
+			    GET_BOVERFLOW(dbp, h, indx)->pgno,
+			    callback, cookie)) != 0)
+				goto err;
+		}
+		break;
+	default:
+		return (__db_pgfmt(dbp->env, h->pgno));
+	}
+
+	ret = callback(dbc, h, cookie, &already_put);
+
+err:	if (!already_put && (t_ret = __memp_fput(mpf,
+	    dbc->thread_info, h, dbc->priority)) != 0 && ret == 0)
+		ret = t_ret;
+	if ((t_ret = __TLPUT(dbc, lock)) != 0 && ret == 0)
+		ret = t_ret;
+
+	return (ret);
+}

btree/bt_upgrade.c

@@ -0,0 +1,153 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: bt_upgrade.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/db_upgrade.h"
+#include "dbinc/btree.h"
+
+/*
+ * __bam_30_btreemeta --
+ *	Upgrade the metadata pages from version 6 to version 7.
+ *
+ * PUBLIC: int __bam_30_btreemeta __P((DB *, char *, u_int8_t *));
+ */
+int
+__bam_30_btreemeta(dbp, real_name, buf)
+	DB *dbp;
+	char *real_name;
+	u_int8_t *buf;
+{
+	BTMETA2X *oldmeta;
+	BTMETA30 *newmeta;
+	ENV *env;
+	int ret;
+
+	env = dbp->env;
+
+	newmeta = (BTMETA30 *)buf;
+	oldmeta = (BTMETA2X *)buf;
+
+	/*
+	 * Move things from the end up, so we do not overwrite things.
+	 * We are going to create a new uid, so we can move the stuff
+	 * at the end of the structure first, overwriting the uid.
+	 */
+
+	newmeta->re_pad = oldmeta->re_pad;
+	newmeta->re_len = oldmeta->re_len;
+	newmeta->minkey = oldmeta->minkey;
+	newmeta->maxkey = oldmeta->maxkey;
+	newmeta->dbmeta.free = oldmeta->free;
+	newmeta->dbmeta.flags = oldmeta->flags;
+	newmeta->dbmeta.type  = P_BTREEMETA;
+
+	newmeta->dbmeta.version = 7;
+	/* Replace the unique ID. */
+	if ((ret = __os_fileid(env, real_name, 1, buf + 36)) != 0)
+		return (ret);
+
+	newmeta->root = 1;
+
+	return (0);
+}
+
+/*
+ * __bam_31_btreemeta --
+ *	Upgrade the database from version 7 to version 8.
+ *
+ * PUBLIC: int __bam_31_btreemeta
+ * PUBLIC:      __P((DB *, char *, u_int32_t, DB_FH *, PAGE *, int *));
+ */
+int
+__bam_31_btreemeta(dbp, real_name, flags, fhp, h, dirtyp)
+	DB *dbp;
+	char *real_name;
+	u_int32_t flags;
+	DB_FH *fhp;
+	PAGE *h;
+	int *dirtyp;
+{
+	BTMETA30 *oldmeta;
+	BTMETA31 *newmeta;
+
+	COMPQUIET(dbp, NULL);
+	COMPQUIET(real_name, NULL);
+	COMPQUIET(fhp, NULL);
+
+	newmeta = (BTMETA31 *)h;
+	oldmeta = (BTMETA30 *)h;
+
+	/*
+	 * Copy the effected fields down the page.
+	 * The fields may overlap each other so we
+	 * start at the bottom and use memmove.
+	 */
+	newmeta->root = oldmeta->root;
+	newmeta->re_pad = oldmeta->re_pad;
+	newmeta->re_len = oldmeta->re_len;
+	newmeta->minkey = oldmeta->minkey;
+	newmeta->maxkey = oldmeta->maxkey;
+	memmove(newmeta->dbmeta.uid,
+	    oldmeta->dbmeta.uid, sizeof(oldmeta->dbmeta.uid));
+	newmeta->dbmeta.flags = oldmeta->dbmeta.flags;
+	newmeta->dbmeta.record_count = 0;
+	newmeta->dbmeta.key_count = 0;
+	ZERO_LSN(newmeta->dbmeta.unused3);
+
+	/* Set the version number. */
+	newmeta->dbmeta.version = 8;
+
+	/* Upgrade the flags. */
+	if (LF_ISSET(DB_DUPSORT))
+		F_SET(&newmeta->dbmeta, BTM_DUPSORT);
+
+	*dirtyp = 1;
+	return (0);
+}
+
+/*
+ * __bam_31_lbtree --
+ *	Upgrade the database btree leaf pages.
+ *
+ * PUBLIC: int __bam_31_lbtree
+ * PUBLIC:      __P((DB *, char *, u_int32_t, DB_FH *, PAGE *, int *));
+ */
+int
+__bam_31_lbtree(dbp, real_name, flags, fhp, h, dirtyp)
+	DB *dbp;
+	char *real_name;
+	u_int32_t flags;
+	DB_FH *fhp;
+	PAGE *h;
+	int *dirtyp;
+{
+	BKEYDATA *bk;
+	db_pgno_t pgno;
+	db_indx_t indx;
+	int ret;
+
+	ret = 0;
+	for (indx = O_INDX; indx < NUM_ENT(h); indx += P_INDX) {
+		bk = GET_BKEYDATA(dbp, h, indx);
+		if (B_TYPE(bk->type) == B_DUPLICATE) {
+			pgno = GET_BOVERFLOW(dbp, h, indx)->pgno;
+			if ((ret = __db_31_offdup(dbp, real_name, fhp,
+			    LF_ISSET(DB_DUPSORT) ? 1 : 0, &pgno)) != 0)
+				break;
+			if (pgno != GET_BOVERFLOW(dbp, h, indx)->pgno) {
+				*dirtyp = 1;
+				GET_BOVERFLOW(dbp, h, indx)->pgno = pgno;
+			}
+		}
+	}
+
+	return (ret);
+}

btree/btree.src

@@ -0,0 +1,271 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: btree.src,v 12.16 2008/02/11 04:22:02 mjc Exp $
+ */
+
+DBPRIVATE
+PREFIX	__bam
+
+INCLUDE #include "db_int.h"
+INCLUDE #include "dbinc/crypto.h"
+INCLUDE #include "dbinc/db_page.h"
+INCLUDE #include "dbinc/db_am.h"
+INCLUDE #include "dbinc/btree.h"
+INCLUDE #include "dbinc/log.h"
+INCLUDE #include "dbinc/txn.h"
+INCLUDE
+
+/*
+ * BTREE-split: used to log a page split.
+ *
+ * left:	the page number for the low-order contents.
+ * llsn:	the left page's original LSN.
+ * right:	the page number for the high-order contents.
+ * rlsn:	the right page's original LSN.
+ * indx:	the number of entries that went to the left page.
+ * npgno:	the next page number
+ * nlsn:	the next page's original LSN (or 0 if no next page).
+ * root_pgno:	the root page number
+ * pg:		the split page's contents before the split.
+ * opflags:	SPL_NRECS: if splitting a tree that maintains a record count.
+ */
+BEGIN split		42	62
+DB	fileid		int32_t		ld
+ARG	left		db_pgno_t	lu
+POINTER	llsn		DB_LSN *	lu
+ARG	right		db_pgno_t	lu
+POINTER	rlsn		DB_LSN *	lu
+ARG	indx		u_int32_t	lu
+ARG	npgno		db_pgno_t	lu
+POINTER	nlsn		DB_LSN *	lu
+ARG	root_pgno	db_pgno_t	lu
+PGDBT	pg		DBT		s
+ARG	opflags		u_int32_t	lu
+END
+
+/*
+ * BTREE-rsplit: used to log a reverse-split
+ *
+ * pgno:	the page number of the page copied over the root.
+ * pgdbt:	the page being copied on the root page.
+ * root_pgno:	the root page number.
+ * nrec:	the tree's record count.
+ * rootent:	last entry on the root page.
+ * rootlsn:	the root page's original lsn.
+ */
+BEGIN rsplit		42	63
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+PGDBT	pgdbt		DBT		s
+ARG	root_pgno	db_pgno_t	lu
+ARG	nrec		db_pgno_t	lu
+DBT	rootent		DBT		s
+POINTER rootlsn		DB_LSN *	lu
+END
+
+/*
+ * BTREE-adj: used to log the adjustment of an index.
+ *
+ * pgno:	the page modified.
+ * lsn:		the page's original lsn.
+ * indx:	the index adjusted.
+ * indx_copy:	the index to copy if inserting.
+ * is_insert:	0 if a delete, 1 if an insert.
+ */
+BEGIN adj		42	55
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	indx		u_int32_t	lu
+ARG	indx_copy	u_int32_t	lu
+ARG	is_insert	u_int32_t	lu
+END
+
+/*
+ * BTREE-cadjust: used to adjust the count change in an internal page.
+ *
+ * pgno:	the page modified.
+ * lsn:		the page's original lsn.
+ * indx:	the index to be adjusted.
+ * adjust:	the signed adjustment.
+ * opflags:	CAD_UPDATEROOT: if root page count was adjusted.
+ */
+BEGIN cadjust		42	56
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	indx		u_int32_t	lu
+ARG	adjust		int32_t		ld
+ARG	opflags		u_int32_t	lu
+END
+
+/*
+ * BTREE-cdel: used to log the intent-to-delete of a cursor record.
+ *
+ * pgno:	the page modified.
+ * lsn:		the page's original lsn.
+ * indx:	the index to be deleted.
+ */
+BEGIN cdel		42	57
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	indx		u_int32_t	lu
+END
+
+/*
+ * BTREE-repl: used to log the replacement of an item.
+ *
+ * pgno:	the page modified.
+ * lsn:		the page's original lsn.
+ * indx:	the index to be replaced.
+ * isdeleted:	set if the record was previously deleted.
+ * orig:	the original data.
+ * repl:	the replacement data.
+ * prefix:	the prefix of the replacement that matches the original.
+ * suffix:	the suffix of the replacement that matches the original.
+ */
+BEGIN repl		42	58
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	indx		u_int32_t	lu
+ARG	isdeleted	u_int32_t	lu
+DBT	orig		DBT		s
+DBT	repl		DBT		s
+ARG	prefix		u_int32_t	lu
+ARG	suffix		u_int32_t	lu
+END
+
+/*
+ * BTREE-root: log the assignment of a root btree page.
+ */
+BEGIN root		42	59
+DB	fileid		int32_t		ld
+ARG	meta_pgno	db_pgno_t	lu
+ARG	root_pgno	db_pgno_t	lu
+POINTER	meta_lsn	DB_LSN *	lu
+END
+
+/*
+ * BTREE-curadj: undo cursor adjustments on txn abort.
+ *     Should only be processed during DB_TXN_ABORT.
+ * NOTE: the first_indx field gets used to hold
+ *	signed index adjustment in one case.
+ *	care should be taken if its size is changed.
+ */
+BEGIN curadj		42	64
+/* Fileid of db affected. */
+DB	fileid		int32_t		ld
+/* Which adjustment. */
+ARG	mode		db_ca_mode	ld
+/* Page entry is from. */
+ARG	from_pgno	db_pgno_t	lu
+/* Page entry  went to. */
+ARG	to_pgno		db_pgno_t	lu
+/* Left page of root split. */
+ARG	left_pgno	db_pgno_t	lu
+/* First index of dup set. Also used as adjustment. */
+ARG	first_indx	u_int32_t	lu
+/* Index entry is from. */
+ARG	from_indx	u_int32_t	lu
+/* Index where entry went. */
+ARG	to_indx		u_int32_t	lu
+END
+
+/*
+ * BTREE-rcuradj: undo cursor adjustments on txn abort in
+ *     renumbering recno trees.
+ *     Should only be processed during DB_TXN_ABORT.
+ */
+BEGIN rcuradj	42	65
+/* Fileid of db affected. */
+DB	fileid		int32_t		ld
+/* Which adjustment. */
+ARG	mode		ca_recno_arg	ld
+/* Root page number. */
+ARG	root		db_pgno_t	ld
+/* Recno of the adjustment. */
+ARG	recno		db_recno_t	ld
+/* Order number of the adjustment. */
+ARG	order		u_int32_t	lu
+END
+
+/*
+ * BTREE-relink -- Handles relinking around a deleted leaf page.
+ *
+ */
+BEGIN_COMPAT relink		43	147
+/* Fileid of db affected. */
+DB	fileid		int32_t		ld
+/* The page being removed. */
+ARG	pgno		db_pgno_t	lu
+/* The page's original lsn. */
+POINTER	lsn		DB_LSN *	lu
+/* The previous page. */
+ARG	prev		db_pgno_t	lu
+/* The previous page's original lsn. */
+POINTER	lsn_prev	DB_LSN *	lu
+/* The next page. */
+ARG	next		db_pgno_t	lu
+/* The previous page's original lsn. */
+POINTER	lsn_next	DB_LSN *	lu
+END
+
+BEGIN relink		44	147
+/* Fileid of db affected. */
+DB	fileid		int32_t		ld
+/* The page being removed. */
+ARG	pgno		db_pgno_t	lu
+/* The new page number, if any. */
+ARG	new_pgno	db_pgno_t	lu
+/* The previous page. */
+ARG	prev		db_pgno_t	lu
+/* The previous page's original lsn. */
+POINTER	lsn_prev	DB_LSN *	lu
+/* The next page. */
+ARG	next		db_pgno_t	lu
+/* The previous page's original lsn. */
+POINTER	lsn_next	DB_LSN *	lu
+END
+
+/*
+ * BTREE-merge -- Handles merging of pages during a compaction.
+ */
+BEGIN_COMPAT merge		44	148
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	npgno		db_pgno_t	lu
+POINTER nlsn		DB_LSN *	lu
+DBT	hdr		DBT		s
+DBT	data		DBT		s
+DBT	ind		DBT		s
+END
+
+BEGIN merge		47	148
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	npgno		db_pgno_t	lu
+POINTER nlsn		DB_LSN *	lu
+PGDBT	hdr		DBT		s
+PGDDBT	data		DBT		s
+ARG	pg_copy		int32_t		lu
+END
+
+/*
+ * BTREE-pgno -- Handles replacing a page number in the record
+ * reference on pgno by indx.
+ */
+BEGIN pgno		44	149
+DB	fileid		int32_t		ld
+ARG	pgno		db_pgno_t	lu
+POINTER	lsn		DB_LSN *	lu
+ARG	indx		u_int32_t	lu
+ARG	opgno		db_pgno_t	lu
+ARG	npgno		db_pgno_t	lu
+END

btree/btree_autop.c

@@ -0,0 +1,697 @@
+/* Do not edit: automatically built by gen_rec.awk. */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/crypto.h"
+#include "dbinc/db_page.h"
+#include "dbinc/db_am.h"
+#include "dbinc/btree.h"
+#include "dbinc/log.h"
+#include "dbinc/txn.h"
+
+/*
+ * PUBLIC: int __bam_split_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_split_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_split_args *argp;
+	u_int32_t i;
+	int ch;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_split_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_split%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tleft: %lu\n", (u_long)argp->left);
+	(void)printf("\tllsn: [%lu][%lu]\n",
+	    (u_long)argp->llsn.file, (u_long)argp->llsn.offset);
+	(void)printf("\tright: %lu\n", (u_long)argp->right);
+	(void)printf("\trlsn: [%lu][%lu]\n",
+	    (u_long)argp->rlsn.file, (u_long)argp->rlsn.offset);
+	(void)printf("\tindx: %lu\n", (u_long)argp->indx);
+	(void)printf("\tnpgno: %lu\n", (u_long)argp->npgno);
+	(void)printf("\tnlsn: [%lu][%lu]\n",
+	    (u_long)argp->nlsn.file, (u_long)argp->nlsn.offset);
+	(void)printf("\troot_pgno: %lu\n", (u_long)argp->root_pgno);
+	(void)printf("\tpg: ");
+	for (i = 0; i < argp->pg.size; i++) {
+		ch = ((u_int8_t *)argp->pg.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\topflags: %lu\n", (u_long)argp->opflags);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_rsplit_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_rsplit_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_rsplit_args *argp;
+	u_int32_t i;
+	int ch;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_rsplit_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_rsplit%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tpgdbt: ");
+	for (i = 0; i < argp->pgdbt.size; i++) {
+		ch = ((u_int8_t *)argp->pgdbt.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\troot_pgno: %lu\n", (u_long)argp->root_pgno);
+	(void)printf("\tnrec: %lu\n", (u_long)argp->nrec);
+	(void)printf("\trootent: ");
+	for (i = 0; i < argp->rootent.size; i++) {
+		ch = ((u_int8_t *)argp->rootent.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\trootlsn: [%lu][%lu]\n",
+	    (u_long)argp->rootlsn.file, (u_long)argp->rootlsn.offset);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_adj_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_adj_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_adj_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_adj_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_adj%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tindx: %lu\n", (u_long)argp->indx);
+	(void)printf("\tindx_copy: %lu\n", (u_long)argp->indx_copy);
+	(void)printf("\tis_insert: %lu\n", (u_long)argp->is_insert);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_cadjust_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_cadjust_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_cadjust_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_cadjust_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_cadjust%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tindx: %lu\n", (u_long)argp->indx);
+	(void)printf("\tadjust: %ld\n", (long)argp->adjust);
+	(void)printf("\topflags: %lu\n", (u_long)argp->opflags);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_cdel_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_cdel_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_cdel_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_cdel_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_cdel%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tindx: %lu\n", (u_long)argp->indx);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_repl_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_repl_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_repl_args *argp;
+	u_int32_t i;
+	int ch;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_repl_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_repl%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tindx: %lu\n", (u_long)argp->indx);
+	(void)printf("\tisdeleted: %lu\n", (u_long)argp->isdeleted);
+	(void)printf("\torig: ");
+	for (i = 0; i < argp->orig.size; i++) {
+		ch = ((u_int8_t *)argp->orig.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\trepl: ");
+	for (i = 0; i < argp->repl.size; i++) {
+		ch = ((u_int8_t *)argp->repl.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\tprefix: %lu\n", (u_long)argp->prefix);
+	(void)printf("\tsuffix: %lu\n", (u_long)argp->suffix);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_root_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_root_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_root_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_root_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_root%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tmeta_pgno: %lu\n", (u_long)argp->meta_pgno);
+	(void)printf("\troot_pgno: %lu\n", (u_long)argp->root_pgno);
+	(void)printf("\tmeta_lsn: [%lu][%lu]\n",
+	    (u_long)argp->meta_lsn.file, (u_long)argp->meta_lsn.offset);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_curadj_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_curadj_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_curadj_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_curadj_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_curadj%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tmode: %ld\n", (long)argp->mode);
+	(void)printf("\tfrom_pgno: %lu\n", (u_long)argp->from_pgno);
+	(void)printf("\tto_pgno: %lu\n", (u_long)argp->to_pgno);
+	(void)printf("\tleft_pgno: %lu\n", (u_long)argp->left_pgno);
+	(void)printf("\tfirst_indx: %lu\n", (u_long)argp->first_indx);
+	(void)printf("\tfrom_indx: %lu\n", (u_long)argp->from_indx);
+	(void)printf("\tto_indx: %lu\n", (u_long)argp->to_indx);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_rcuradj_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_rcuradj_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_rcuradj_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_rcuradj_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_rcuradj%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tmode: %ld\n", (long)argp->mode);
+	(void)printf("\troot: %ld\n", (long)argp->root);
+	(void)printf("\trecno: %ld\n", (long)argp->recno);
+	(void)printf("\torder: %lu\n", (u_long)argp->order);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_relink_43_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_relink_43_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_relink_43_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_relink_43_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_relink_43%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tprev: %lu\n", (u_long)argp->prev);
+	(void)printf("\tlsn_prev: [%lu][%lu]\n",
+	    (u_long)argp->lsn_prev.file, (u_long)argp->lsn_prev.offset);
+	(void)printf("\tnext: %lu\n", (u_long)argp->next);
+	(void)printf("\tlsn_next: [%lu][%lu]\n",
+	    (u_long)argp->lsn_next.file, (u_long)argp->lsn_next.offset);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_relink_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_relink_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_relink_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_relink_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_relink%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tnew_pgno: %lu\n", (u_long)argp->new_pgno);
+	(void)printf("\tprev: %lu\n", (u_long)argp->prev);
+	(void)printf("\tlsn_prev: [%lu][%lu]\n",
+	    (u_long)argp->lsn_prev.file, (u_long)argp->lsn_prev.offset);
+	(void)printf("\tnext: %lu\n", (u_long)argp->next);
+	(void)printf("\tlsn_next: [%lu][%lu]\n",
+	    (u_long)argp->lsn_next.file, (u_long)argp->lsn_next.offset);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_merge_44_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_merge_44_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_merge_44_args *argp;
+	u_int32_t i;
+	int ch;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_merge_44_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_merge_44%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tnpgno: %lu\n", (u_long)argp->npgno);
+	(void)printf("\tnlsn: [%lu][%lu]\n",
+	    (u_long)argp->nlsn.file, (u_long)argp->nlsn.offset);
+	(void)printf("\thdr: ");
+	for (i = 0; i < argp->hdr.size; i++) {
+		ch = ((u_int8_t *)argp->hdr.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\tdata: ");
+	for (i = 0; i < argp->data.size; i++) {
+		ch = ((u_int8_t *)argp->data.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\tind: ");
+	for (i = 0; i < argp->ind.size; i++) {
+		ch = ((u_int8_t *)argp->ind.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_merge_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_merge_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_merge_args *argp;
+	u_int32_t i;
+	int ch;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_merge_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_merge%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tnpgno: %lu\n", (u_long)argp->npgno);
+	(void)printf("\tnlsn: [%lu][%lu]\n",
+	    (u_long)argp->nlsn.file, (u_long)argp->nlsn.offset);
+	(void)printf("\thdr: ");
+	for (i = 0; i < argp->hdr.size; i++) {
+		ch = ((u_int8_t *)argp->hdr.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\tdata: ");
+	for (i = 0; i < argp->data.size; i++) {
+		ch = ((u_int8_t *)argp->data.data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	(void)printf("\n");
+	(void)printf("\tpg_copy: %lu\n", (u_long)argp->pg_copy);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_pgno_print __P((ENV *, DBT *, DB_LSN *,
+ * PUBLIC:     db_recops, void *));
+ */
+int
+__bam_pgno_print(env, dbtp, lsnp, notused2, notused3)
+	ENV *env;
+	DBT *dbtp;
+	DB_LSN *lsnp;
+	db_recops notused2;
+	void *notused3;
+{
+	__bam_pgno_args *argp;
+	int ret;
+
+	notused2 = DB_TXN_PRINT;
+	notused3 = NULL;
+
+	if ((ret =
+	    __bam_pgno_read(env, NULL, NULL, dbtp->data, &argp)) != 0)
+		return (ret);
+	(void)printf(
+    "[%lu][%lu]__bam_pgno%s: rec: %lu txnp %lx prevlsn [%lu][%lu]\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset,
+	    (argp->type & DB_debug_FLAG) ? "_debug" : "",
+	    (u_long)argp->type,
+	    (u_long)argp->txnp->txnid,
+	    (u_long)argp->prev_lsn.file, (u_long)argp->prev_lsn.offset);
+	(void)printf("\tfileid: %ld\n", (long)argp->fileid);
+	(void)printf("\tpgno: %lu\n", (u_long)argp->pgno);
+	(void)printf("\tlsn: [%lu][%lu]\n",
+	    (u_long)argp->lsn.file, (u_long)argp->lsn.offset);
+	(void)printf("\tindx: %lu\n", (u_long)argp->indx);
+	(void)printf("\topgno: %lu\n", (u_long)argp->opgno);
+	(void)printf("\tnpgno: %lu\n", (u_long)argp->npgno);
+	(void)printf("\n");
+	__os_free(env, argp);
+	return (0);
+}
+
+/*
+ * PUBLIC: int __bam_init_print __P((ENV *, DB_DISTAB *));
+ */
+int
+__bam_init_print(env, dtabp)
+	ENV *env;
+	DB_DISTAB *dtabp;
+{
+	int ret;
+
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_split_print, DB___bam_split)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_rsplit_print, DB___bam_rsplit)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_adj_print, DB___bam_adj)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_cadjust_print, DB___bam_cadjust)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_cdel_print, DB___bam_cdel)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_repl_print, DB___bam_repl)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_root_print, DB___bam_root)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_curadj_print, DB___bam_curadj)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_rcuradj_print, DB___bam_rcuradj)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_relink_print, DB___bam_relink)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_merge_print, DB___bam_merge)) != 0)
+		return (ret);
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_pgno_print, DB___bam_pgno)) != 0)
+		return (ret);
+	return (0);
+}

build_brew/bdb_brew.dsp

@@ -0,0 +1,628 @@
+# Microsoft Developer Studio Project File - Name="bdb_brew" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=bdb_brew - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "bdb_brew.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "bdb_brew.mak" CFG="bdb_brew - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "bdb_brew - Win32 Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "bdb_brew - Win32 Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "bdb_brew - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release/bdb_brew"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release/bdb_brew"
+# PROP Target_Dir ""
+LINK32=link.exe
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "." /I ".." /D "UNICODE" /D "_UNICODE" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "." /I ".." /I "$(BREWDIR)\inc" /D "UNICODE" /D "_UNICODE" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
+# ADD BASE RSC /l 0xc09
+# ADD RSC /l 0xc09
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF  "$(CFG)" == "bdb_brew - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug/bdb_brew"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug/bdb_brew"
+# PROP Target_Dir ""
+LINK32=link.exe
+# ADD BASE CPP /nologo /MDd /W3 /GX /Z7 /Od /I "." /I ".." /D "DIAGNOSTIC" /D "UNICODE" /D "_UNICODE" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /FD /c
+# ADD CPP /nologo /MDd /W3 /GX /ZI /Od /X /I "." /I ".." /I "$(BREWDIR)\inc" /D "DIAGNOSTIC" /D "UNICODE" /D "_UNICODE" /D "_DEBUG" /D "AEE_SIMULATOR" /D "__NO_SYSTEM_INCLUDES" /FR /FD /c
+# ADD BASE RSC /l 0xc09
+# ADD RSC /l 0xc09
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ENDIF 
+
+# Begin Target
+
+# Name "bdb_brew - Win32 Release"
+# Name "bdb_brew - Win32 Debug"
+# Begin Group "header_files"
+
+# PROP Default_Filter ""
+# Begin Source File
+
+SOURCE=.\brew_db.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\clib_port.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\db.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\db_config.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\db_int.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\errno.h
+# End Source File
+# End Group
+# Begin Group "source_files"
+
+# PROP Default_Filter ""
+# Begin Source File
+SOURCE=..\btree\bt_compact.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_compare.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_conv.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_curadj.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_cursor.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_delete.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_method.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_open.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_put.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_rec.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_reclaim.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_recno.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_rsearch.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_search.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_split.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\bt_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\btree\btree_auto.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\atol.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\isalpha.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\isdigit.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\isprint.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\isspace.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\printf.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\qsort.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\rand.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\strcasecmp.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\strerror.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\strncat.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\strsep.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\strtol.c
+# End Source File
+# Begin Source File
+SOURCE=..\clib\time.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\crypto_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\db_byteorder.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\db_err.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\db_getlong.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\db_idspace.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\db_log2.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\db_shash.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\dbt.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\mkpath.c
+# End Source File
+# Begin Source File
+SOURCE=..\common\zerofill.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\crdel_auto.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\crdel_rec.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_am.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_auto.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_cam.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_cds.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_conv.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_dispatch.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_dup.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_iface.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_join.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_meta.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_method.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_open.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_overflow.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_pr.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_rec.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_reclaim.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_remove.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_rename.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_ret.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_setid.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_setlsn.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_stati.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_truncate.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_upg.c
+# End Source File
+# Begin Source File
+SOURCE=..\db\db_vrfy_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\dbreg\dbreg.c
+# End Source File
+# Begin Source File
+SOURCE=..\dbreg\dbreg_auto.c
+# End Source File
+# Begin Source File
+SOURCE=..\dbreg\dbreg_rec.c
+# End Source File
+# Begin Source File
+SOURCE=..\dbreg\dbreg_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\dbreg\dbreg_util.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_alloc.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_config.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_failchk.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_file.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_method.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_name.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_open.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_recover.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_region.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_register.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_sig.c
+# End Source File
+# Begin Source File
+SOURCE=..\env\env_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\fileops\fileops_auto.c
+# End Source File
+# Begin Source File
+SOURCE=..\fileops\fop_basic.c
+# End Source File
+# Begin Source File
+SOURCE=..\fileops\fop_rec.c
+# End Source File
+# Begin Source File
+SOURCE=..\fileops\fop_util.c
+# End Source File
+# Begin Source File
+SOURCE=..\hash\hash_func.c
+# End Source File
+# Begin Source File
+SOURCE=..\hash\hash_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\hmac\hmac.c
+# End Source File
+# Begin Source File
+SOURCE=..\hmac\sha1.c
+# End Source File
+# Begin Source File
+SOURCE=..\lock\lock_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_archive.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_compare.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_debug.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_get.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_method.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_put.c
+# End Source File
+# Begin Source File
+SOURCE=..\log\log_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_alloc.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_bh.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_fget.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_fmethod.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_fopen.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_fput.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_fset.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_method.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_mvcc.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_region.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_register.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_resize.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_sync.c
+# End Source File
+# Begin Source File
+SOURCE=..\mp\mp_trickle.c
+# End Source File
+# Begin Source File
+SOURCE=..\mutex\mut_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_alloc.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_cpu.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_fid.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_flock.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_getenv.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_map.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_root.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_rpath.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_stack.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_tmpdir.c
+# End Source File
+# Begin Source File
+SOURCE=..\os\os_uid.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\ctime.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\fclose.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\fgetc.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\fgets.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\fopen.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\fwrite.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\getcwd.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\globals.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\localtime.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_abort.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_abs.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_clock.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_config.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_dir.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_errno.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_handle.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_mkdir.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_open.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_pid.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_rename.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_rw.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_seek.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_truncate.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_unlink.c
+# End Source File
+# Begin Source File
+SOURCE=..\os_brew\os_yield.c
+# End Source File
+# Begin Source File
+SOURCE=..\qam\qam_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\rep\rep_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\repmgr\repmgr_stub.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_auto.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_chkpt.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_failchk.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_method.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_rec.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_recover.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_region.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_stat.c
+# End Source File
+# Begin Source File
+SOURCE=..\txn\txn_util.c
+# End Source File
+# Begin Source File
+SOURCE=..\xa\xa_stub.c
+# End Source File
+# End Group
+# End Target
+# End Project

build_brew/bdb_brew.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "bdb_brew"=.\bdb_brew.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

build_brew/bdbread.mak

@@ -0,0 +1,588 @@
+#============================================================================
+#  Name:
+#    $(TARGET).MAK
+#
+#  Description:
+#    Makefile to build the $(TARGET) downloadable module.
+#
+#   The following nmake targets are available in this makefile:
+#
+#     all           - make .elf and .mod image files (default)
+#     clean         - delete object directory and image files
+#     filename.o    - make object file
+#
+#   The above targets can be made with the following command:
+#
+#     nmake /f $(TARGET).mak [target]
+#
+#  Assumptions:
+#    1. The environment variable ADSHOME is set to the root directory of the
+#       arm tools.
+#    2. The version of ADS is 1.2 or above.
+#
+#  Notes:
+#    None.
+#
+#
+#        Copyright <20> 2000-2003 QUALCOMM Incorporated.
+#               All Rights Reserved.
+#            QUALCOMM Proprietary/GTDR
+#
+#----------------------------------------------------------------------------
+#============================================================================
+BREW_HOME      =$(BREWDIR)
+ARM_HOME       =$(ARMHOME)
+TARGET         =D:\DB7588~1.BRE\BUILD_~1\bdb_brew
+OBJS           =bdbread.o AEEModGen.o AEEAppGen.o bt_compact.o bt_compare.o bt_conv.o bt_curadj.o bt_cursor.o bt_delete.o bt_method.o bt_open.o bt_put.o bt_rec.o bt_reclaim.o bt_recno.o bt_rsearch.o bt_search.o bt_split.o bt_stat.o btree_auto.o atol.o isalpha.o isdigit.o isprint.o isspace.o printf.o qsort.o rand.o strcasecmp.o strerror.o strncat.o strsep.o strtol.o time.o crypto_stub.o db_byteorder.o db_err.o db_getlong.o db_idspace.o db_log2.o db_shash.o dbt.o mkpath.o zerofill.o crdel_auto.o crdel_rec.o db.o db_am.o db_auto.o db_cam.o db_cds.o db_conv.o db_dispatch.o db_dup.o db_iface.o db_join.o db_meta.o db_method.o db_open.o db_overflow.o db_pr.o db_rec.o db_reclaim.o db_remove.o db_rename.o db_ret.o db_setid.o db_setlsn.o db_stati.o db_truncate.o db_upg.o db_vrfy_stub.o dbreg.o dbreg_auto.o dbreg_rec.o dbreg_stat.o dbreg_util.o env_alloc.o env_config.o env_failchk.o env_file.o env_method.o env_name.o env_open.o env_recover.o env_region.o env_register.o env_sig.o env_stat.o fileops_auto.o fop_basic.o fop_rec.o fop_util.o hash_func.o hash_stub.o hmac.o sha1.o lock_stub.o log.o log_archive.o log_compare.o log_debug.o log_get.o log_method.o log_put.o log_stat.o mp_alloc.o mp_bh.o mp_fget.o mp_fmethod.o mp_fopen.o mp_fput.o mp_fset.o mp_method.o mp_mvcc.o mp_region.o mp_register.o mp_resize.o mp_stat.o mp_sync.o mp_trickle.o mut_stub.o os_alloc.o os_cpu.o os_fid.o os_flock.o os_getenv.o os_map.o os_root.o os_rpath.o os_stack.o os_tmpdir.o os_uid.o ctime.o fclose.o fgetc.o fgets.o fopen.o fwrite.o getcwd.o globals.o localtime.o os_abort.o os_abs.o os_clock.o os_config.o os_dir.o os_errno.o os_handle.o os_mkdir.o os_open.o os_pid.o os_rename.o os_rw.o os_seek.o os_stat.o os_truncate.o os_unlink.o os_yield.o qam_stub.o rep_stub.o repmgr_stub.o txn.o txn_auto.o txn_chkpt.o txn_failchk.o txn_method.o txn_rec.o txn_recover.o txn_region.o txn_stat.o txn_util.o xa_stub.o
+APP_INCLUDES   =  -I ..\build_brew  -I ..
+
+#-------------------------------------------------------------------------------
+# Target file name and type definitions
+#-------------------------------------------------------------------------------
+
+EXETYPE    = elf                # Target image file format
+MODULE     = mod                # Downloadable module extension
+
+#-------------------------------------------------------------------------------
+# Target compile time symbol definitions
+#
+# Tells the SDK source stuffs that we're building a dynamic app.
+#-------------------------------------------------------------------------------
+
+DYNAPP          = -DDYNAMIC_APP
+
+
+#-------------------------------------------------------------------------------
+# Software tool and environment definitions
+#-------------------------------------------------------------------------------
+
+AEESRCPATH = $(BREW_HOME)\src
+AEEINCPATH = $(BREW_HOME)\inc
+
+ARMBIN = $(ARM_HOME)\bin        # ARM ADS application directory
+ARMINC = $(ARM_HOME)\include    # ARM ADS include file directory
+ARMLIB = $(ARM_HOME)\lib        # ARM ADS library directory
+
+ARMCC   = $(ARMBIN)\armcc       # ARM ADS ARM 32-bit inst. set ANSI C compiler
+LD      = $(ARMBIN)\armlink     # ARM ADS linker
+HEXTOOL = $(ARMBIN)\fromelf     # ARM ADS utility to create hex file from image
+
+OBJ_CMD    = -o                 # Command line option to specify output filename
+
+#-------------------------------------------------------------------------------
+# Processor architecture options
+#-------------------------------------------------------------------------------
+
+CPU = -cpu ARM7TDMI             # ARM7TDMI target processor
+
+#-------------------------------------------------------------------------------
+# ARM Procedure Call Standard (APCS) options
+#-------------------------------------------------------------------------------
+
+ROPI     = ropi                 # Read-Only(code) Position independence
+INTERWRK = interwork            # Allow ARM-Thumb interworking
+
+APCS = -apcs /$(ROPI)/$(INTERWRK)/norwpi
+
+#-------------------------------------------------------------------------------
+# Additional compile time error checking options
+#-------------------------------------------------------------------------------
+
+CHK = -fa                       # Check for data flow anomolies
+
+#-------------------------------------------------------------------------------
+# Compiler output options
+#-------------------------------------------------------------------------------
+
+OUT = -c                        # Object file output only
+
+#-------------------------------------------------------------------------------
+# Compiler/assembler debug options
+#-------------------------------------------------------------------------------
+
+DBG = -g                        # Enable debug
+
+#-------------------------------------------------------------------------------
+# Compiler optimization options
+#-------------------------------------------------------------------------------
+
+OPT = -Ospace -O2               # Full compiler optimization for space
+
+#-------------------------------------------------------------------------------
+# Compiler code generation options
+#-------------------------------------------------------------------------------
+
+END = -littleend                # Compile for little endian memory architecture
+ZA  = -zo                       # LDR may only access 32-bit aligned addresses
+
+CODE = $(END) $(ZA)
+
+
+#-------------------------------------------------------------------------------
+# Include file search path options
+#-------------------------------------------------------------------------------
+
+INC = -I. -I$(AEEINCPATH) $(APP_INCLUDES)
+
+
+#-------------------------------------------------------------------------------
+# Compiler pragma emulation options
+#-------------------------------------------------------------------------------
+
+
+#-------------------------------------------------------------------------------
+# Linker options
+#-------------------------------------------------------------------------------
+
+LINK_CMD = -o                    #Command line option to specify output file
+                                 #on linking
+
+ROPILINK = -ropi                 #Link image as Read-Only Position Independent
+
+LINK_ORDER = -first AEEMod_Load
+
+#-------------------------------------------------------------------------------
+# HEXTOOL options
+#-------------------------------------------------------------------------------
+
+BINFORMAT = -bin
+
+
+#-------------------------------------------------------------------------------
+# Compiler flag definitions
+#-------------------------------------------------------------------------------
+NO_WARNING= -W
+
+CFLAGS0 = $(OUT) $(DYNAPP) $(CPU) $(APCS) $(CODE) $(CHK) $(DBG)
+CFLAGS  = $(NO_WARNING) $(CFLAGS0) $(OPT)
+
+#-------------------------------------------------------------------------------
+# Linker flag definitions
+#-------------------------------------------------------------------------------
+
+# the -entry flag is not really needed, but it keeps the linker from reporting
+# warning L6305W (no entry point).  The address
+LFLAGS = $(ROPILINK) -rwpi -entry 0x8000#
+
+#----------------------------------------------------------------------------
+# Default target
+#----------------------------------------------------------------------------
+
+all :  $(TARGET).$(MODULE)
+
+#----------------------------------------------------------------------------
+# Clean target
+#----------------------------------------------------------------------------
+
+# The object subdirectory, target image file, and target hex file are deleted.
+
+clean :
+        @echo ---------------------------------------------------------------
+        @echo CLEAN
+        -del /f $(OBJS)
+        -del /f $(TARGET).$(EXETYPE)
+        -del /f $(TARGET).$(MODULE)
+        @echo ---------------------------------------------------------------
+
+#============================================================================
+#                           DEFAULT SUFFIX RULES
+#============================================================================
+
+# The following are the default suffix rules used to compile all objects that
+# are not specifically included in one of the module specific rules defined
+# in the next section.
+
+# The following macros are used to specify the output object file, MSG_FILE
+# symbol definition and input source file on the compile line in the rules
+# defined below.
+
+SRC_FILE = $(@F:.o=.c)                  # Input source file specification
+OBJ_FILE = $(OBJ_CMD) $(@F)   # Output object file specification
+
+.SUFFIXES :
+.SUFFIXES : .o .dep .c
+
+#--------------------------------------------------------------------------
+# C code inference rules
+#----------------------------------------------------------------------------
+
+.c.o:
+        @echo ---------------------------------------------------------------
+        @echo OBJECT $(@F)
+        $(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE) $(SRC_FILE)
+        @echo ---------------------------------------------------------------
+
+.c.mix:
+        @echo ---------------------------------------------------------------
+        @echo OBJECT $(@F)
+        $(ARMCC) -S -fs $(CFLAGS) $(INC) $(OBJ_FILE) $<
+        @echo ---------------------------------------------------------------
+
+
+{$(AEESRCPATH)}.c.o:
+        @echo ---------------------------------------------------------------
+        @echo OBJECT $(@F)
+        $(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE) $(AEESRCPATH)\$(SRC_FILE)
+        @echo ---------------------------------------------------------------
+
+
+#===============================================================================
+#                           MODULE SPECIFIC RULES
+#===============================================================================
+
+APP_OBJS = $(OBJS)
+
+
+#----------------------------------------------------------------------------
+# Lib file targets
+#----------------------------------------------------------------------------
+
+$(TARGET).$(MODULE) : $(TARGET).$(EXETYPE)
+        @echo ---------------------------------------------------------------
+        @echo TARGET $@
+        $(HEXTOOL)  $(TARGET).$(EXETYPE) $(BINFORMAT) $(TARGET).$(MODULE)
+
+$(TARGET).$(EXETYPE) : $(APP_OBJS)
+        @echo ---------------------------------------------------------------
+        @echo TARGET $@
+        $(LD) $(LINK_CMD) $(TARGET).$(EXETYPE) $(LFLAGS) $(APP_OBJS) $(LINK_ORDER)
+
+#----------------------------------------------------------------------------
+# Applet Specific Rules
+#----------------------------------------------------------------------------
+
+
+RULE1 = ..\clib
+{$(RULE1)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE1)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE2 = ..\btree
+{$(RULE2)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE2)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE3 = ..\db
+{$(RULE3)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE3)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE4 = ..\common
+{$(RULE4)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE4)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE5 = ..\os_brew
+{$(RULE5)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE5)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE6 = ..\env
+{$(RULE6)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE6)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE7 = ..\dbreg
+{$(RULE7)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE7)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE8 = ..\fileops
+{$(RULE8)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE8)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE9 = ..\hash
+{$(RULE9)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE9)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE10 = ..\hmac
+{$(RULE10)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE10)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE11 = ..\lock
+{$(RULE11)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE11)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE12 = ..\log
+{$(RULE12)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE12)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE13 = ..\mp
+{$(RULE13)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE13)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE14 = ..\mutex
+{$(RULE14)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE14)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE15 = ..\os
+{$(RULE15)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE15)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE16 = ..\qam
+{$(RULE16)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE16)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE17 = ..\rep
+{$(RULE17)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE17)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE18 = ..\txn
+{$(RULE18)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE18)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+
+
+RULE19 = ..\xa
+{$(RULE19)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE19)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+RULE20 = ..\bdbread
+{$(RULE20)}.c.o:
+	@echo ---------------------------------------------------------------
+	@echo OBJECT $(@F)
+	$(ARMCC) $(CFLAGS) $(INC) $(OBJ_FILE)  $(RULE20)\$(SRC_FILE)
+	@echo ---------------------------------------------------------------
+	
+# --------------------------------------------
+# DEPENDENCY LIST, DO NOT EDIT BELOW THIS LINE
+# --------------------------------------------
+
+bdbread.o : ..\bdbread\bdbread.c
+AEEModGen.o : ..\bdbread\AEEModGen.c
+AEEAppGen.o : ..\bdbread\AEEAppGen.c
+bt_compact.o:	..\btree\bt_compact.c
+bt_compare.o:	..\btree\bt_compare.c
+bt_conv.o:	..\btree\bt_conv.c
+bt_curadj.o:	..\btree\bt_curadj.c
+bt_cursor.o:	..\btree\bt_cursor.c
+bt_delete.o:	..\btree\bt_delete.c
+bt_method.o:	..\btree\bt_method.c
+bt_open.o:	..\btree\bt_open.c
+bt_put.o:	..\btree\bt_put.c
+bt_rec.o:	..\btree\bt_rec.c
+bt_reclaim.o:	..\btree\bt_reclaim.c
+bt_recno.o:	..\btree\bt_recno.c
+bt_rsearch.o:	..\btree\bt_rsearch.c
+bt_search.o:	..\btree\bt_search.c
+bt_split.o:	..\btree\bt_split.c
+bt_stat.o:	..\btree\bt_stat.c
+btree_auto.o:	..\btree\btree_auto.c
+atol.o:	..\clib\atol.c
+isalpha.o:	..\clib\isalpha.c
+isdigit.o:	..\clib\isdigit.c
+isprint.o:	..\clib\isprint.c
+isspace.o:	..\clib\isspace.c
+printf.o:	..\clib\printf.c
+qsort.o:	..\clib\qsort.c
+rand.o:	..\clib\rand.c
+strcasecmp.o:	..\clib\strcasecmp.c
+strerror.o:	..\clib\strerror.c
+strncat.o:	..\clib\strncat.c
+strsep.o:	..\clib\strsep.c
+strtol.o:	..\clib\strtol.c
+time.o:	..\clib\time.c
+crypto_stub.o:	..\common\crypto_stub.c
+db_byteorder.o:	..\common\db_byteorder.c
+db_err.o:	..\common\db_err.c
+db_getlong.o:	..\common\db_getlong.c
+db_idspace.o:	..\common\db_idspace.c
+db_log2.o:	..\common\db_log2.c
+db_shash.o:	..\common\db_shash.c
+dbt.o:	..\common\dbt.c
+mkpath.o:	..\common\mkpath.c
+zerofill.o:	..\common\zerofill.c
+crdel_auto.o:	..\db\crdel_auto.c
+crdel_rec.o:	..\db\crdel_rec.c
+db.o:	..\db\db.c
+db_am.o:	..\db\db_am.c
+db_auto.o:	..\db\db_auto.c
+db_cam.o:	..\db\db_cam.c
+db_cds.o:	..\db\db_cds.c
+db_conv.o:	..\db\db_conv.c
+db_dispatch.o:	..\db\db_dispatch.c
+db_dup.o:	..\db\db_dup.c
+db_iface.o:	..\db\db_iface.c
+db_join.o:	..\db\db_join.c
+db_meta.o:	..\db\db_meta.c
+db_method.o:	..\db\db_method.c
+db_open.o:	..\db\db_open.c
+db_overflow.o:	..\db\db_overflow.c
+db_pr.o:	..\db\db_pr.c
+db_rec.o:	..\db\db_rec.c
+db_reclaim.o:	..\db\db_reclaim.c
+db_remove.o:	..\db\db_remove.c
+db_rename.o:	..\db\db_rename.c
+db_ret.o:	..\db\db_ret.c
+db_setid.o:	..\db\db_setid.c
+db_setlsn.o:	..\db\db_setlsn.c
+db_stati.o:	..\db\db_stati.c
+db_truncate.o:	..\db\db_truncate.c
+db_upg.o:	..\db\db_upg.c
+db_vrfy_stub.o:	..\db\db_vrfy_stub.c
+dbreg.o:	..\dbreg\dbreg.c
+dbreg_auto.o:	..\dbreg\dbreg_auto.c
+dbreg_rec.o:	..\dbreg\dbreg_rec.c
+dbreg_stat.o:	..\dbreg\dbreg_stat.c
+dbreg_util.o:	..\dbreg\dbreg_util.c
+env_alloc.o:	..\env\env_alloc.c
+env_config.o:	..\env\env_config.c
+env_failchk.o:	..\env\env_failchk.c
+env_file.o:	..\env\env_file.c
+env_method.o:	..\env\env_method.c
+env_name.o:	..\env\env_name.c
+env_open.o:	..\env\env_open.c
+env_recover.o:	..\env\env_recover.c
+env_region.o:	..\env\env_region.c
+env_register.o:	..\env\env_register.c
+env_sig.o:	..\env\env_sig.c
+env_stat.o:	..\env\env_stat.c
+fileops_auto.o:	..\fileops\fileops_auto.c
+fop_basic.o:	..\fileops\fop_basic.c
+fop_rec.o:	..\fileops\fop_rec.c
+fop_util.o:	..\fileops\fop_util.c
+hash_func.o:	..\hash\hash_func.c
+hash_stub.o:	..\hash\hash_stub.c
+hmac.o:	..\hmac\hmac.c
+sha1.o:	..\hmac\sha1.c
+lock_stub.o:	..\lock\lock_stub.c
+log.o:	..\log\log.c
+log_archive.o:	..\log\log_archive.c
+log_compare.o:	..\log\log_compare.c
+log_debug.o:	..\log\log_debug.c
+log_get.o:	..\log\log_get.c
+log_method.o:	..\log\log_method.c
+log_put.o:	..\log\log_put.c
+log_stat.o:	..\log\log_stat.c
+mp_alloc.o:	..\mp\mp_alloc.c
+mp_bh.o:	..\mp\mp_bh.c
+mp_fget.o:	..\mp\mp_fget.c
+mp_fmethod.o:	..\mp\mp_fmethod.c
+mp_fopen.o:	..\mp\mp_fopen.c
+mp_fput.o:	..\mp\mp_fput.c
+mp_fset.o:	..\mp\mp_fset.c
+mp_method.o:	..\mp\mp_method.c
+mp_mvcc.o:	..\mp\mp_mvcc.c
+mp_region.o:	..\mp\mp_region.c
+mp_register.o:	..\mp\mp_register.c
+mp_resize.o:	..\mp\mp_resize.c
+mp_stat.o:	..\mp\mp_stat.c
+mp_sync.o:	..\mp\mp_sync.c
+mp_trickle.o:	..\mp\mp_trickle.c
+mut_stub.o:	..\mutex\mut_stub.c
+os_alloc.o:	..\os\os_alloc.c
+os_cpu.o:	..\os\os_cpu.c
+os_fid.o:	..\os\os_fid.c
+os_flock.o:	..\os\os_flock.c
+os_getenv.o:	..\os\os_getenv.c
+os_map.o:	..\os\os_map.c
+os_root.o:	..\os\os_root.c
+os_rpath.o:	..\os\os_rpath.c
+os_stack.o:	..\os\os_stack.c
+os_tmpdir.o:	..\os\os_tmpdir.c
+os_uid.o:	..\os\os_uid.c
+ctime.o:	..\os_brew\ctime.c
+fclose.o:	..\os_brew\fclose.c
+fgetc.o:	..\os_brew\fgetc.c
+fgets.o:	..\os_brew\fgets.c
+fopen.o:	..\os_brew\fopen.c
+fwrite.o:	..\os_brew\fwrite.c
+getcwd.o:	..\os_brew\getcwd.c
+globals.o:	..\os_brew\globals.c
+localtime.o:	..\os_brew\localtime.c
+os_abort.o:	..\os_brew\os_abort.c
+os_abs.o:	..\os_brew\os_abs.c
+os_clock.o:	..\os_brew\os_clock.c
+os_config.o:	..\os_brew\os_config.c
+os_dir.o:	..\os_brew\os_dir.c
+os_errno.o:	..\os_brew\os_errno.c
+os_handle.o:	..\os_brew\os_handle.c
+os_mkdir.o:	..\os_brew\os_mkdir.c
+os_open.o:	..\os_brew\os_open.c
+os_pid.o:	..\os_brew\os_pid.c
+os_rename.o:	..\os_brew\os_rename.c
+os_rw.o:	..\os_brew\os_rw.c
+os_seek.o:	..\os_brew\os_seek.c
+os_stat.o:	..\os_brew\os_stat.c
+os_truncate.o:	..\os_brew\os_truncate.c
+os_unlink.o:	..\os_brew\os_unlink.c
+os_yield.o:	..\os_brew\os_yield.c
+qam_stub.o:	..\qam\qam_stub.c
+rep_stub.o:	..\rep\rep_stub.c
+repmgr_stub.o:	..\repmgr\repmgr_stub.c
+txn.o:	..\txn\txn.c
+txn_auto.o:	..\txn\txn_auto.c
+txn_chkpt.o:	..\txn\txn_chkpt.c
+txn_failchk.o:	..\txn\txn_failchk.c
+txn_method.o:	..\txn\txn_method.c
+txn_rec.o:	..\txn\txn_rec.c
+txn_recover.o:	..\txn\txn_recover.c
+txn_region.o:	..\txn\txn_region.c
+txn_stat.o:	..\txn\txn_stat.c
+txn_util.o:	..\txn\txn_util.c
+xa_stub.o:	..\xa\xa_stub.c

build_brew/brew_db.h

@@ -0,0 +1,150 @@
+/*-
+ * $Id: brew_db.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ *
+ * The following provides the information necessary to build Berkeley DB
+ * on BREW.
+ */
+
+#include <AEEAppGen.h>
+#include <AEEShell.h>
+#include <AEEFile.h>
+#include <AEEStdLib.h>
+
+#include "errno.h"
+#include "db.h"
+#include "clib_port.h"
+
+/*
+ * BREW doesn't have stdio.
+ */
+#define	EOF	(-1)			/* Declare stdio's EOF. */
+#define	stderr	((IFile *)1)		/* Flag to call DBGPRINTF. */
+#define	stdout	((IFile *)1)
+
+/*
+ * POSIX time structure/function compatibility.
+ *
+ * !!!
+ * This is likely wrong, we should probably move all Berkeley DB time-specific
+ * functionality into os/.
+ */
+struct tm {
+	int tm_sec;     /* seconds after the minute - [0,59] */
+	int tm_min;     /* minutes after the hour - [0,59] */
+	int tm_hour;    /* hours since midnight - [0,23] */
+	int tm_mday;    /* day of the month - [1,31] */
+	int tm_mon;     /* months since January - [0,11] */
+	int tm_year;    /* years since 1900 */
+	int tm_wday;    /* days since Sunday - [0,6] */
+	int tm_yday;    /* days since January 1 - [0,365] */
+	int tm_isdst;   /* daylight savings time flag */
+	/*
+	 * We don't provide tm_zone or tm_gmtoff because BREW doesn't
+	 * provide them.
+	 */
+};
+
+/*
+* The ctime() function converts the time pointed to by clock, representing
+* time in seconds since the Epoch to local time in the form of a string.
+*
+* Berkeley DB uses POSIX time values internally.
+*
+* The POSIX time function returns seconds since the Epoch, which was
+* 1970/01/01 00:00:00 UTC.
+*
+* BREW's GETUTCSECONDS() returns the number of seconds since
+* 1980/01/06 00:00:00 UTC.
+*
+* To convert from BREW to POSIX, add the seconds between 1970 and 1980 plus
+* 6 more days.
+*/
+#define	BREW_EPOCH_OFFSET	(315964800L)
+
+/*
+ * Map ANSI C library functions to BREW specific APIs.
+ */
+#define	atoi(a)			ATOI(a)
+#define	free(a)			FREE(a)
+#define	malloc(a)		MALLOC(a)
+#define	memcmp(a, b, c)		MEMCMP(a, b, c)
+#define	memmove(a, b, c)	MEMMOVE(a, b, c)
+#define	memset(a, b, c)		MEMSET(a, b, c)
+#define	realloc(a, b)		REALLOC(a, b)
+#define	snprintf		SNPRINTF
+#define	sprintf			SPRINTF
+#define	strcat(a, b)		STRCAT(a, b)
+#define	strchr(a, b)		STRCHR(a, b)
+#define	strcmp(a, b)		STRCMP(a, b)
+#define	strcpy(a, b)		STRCPY(a, b)
+#define	strdup(a)		STRDUP(a)
+#define	strlen(a)		STRLEN(a)
+#define	strncmp(a, b, c)	STRNCMP(a, b, c)
+#define	strncpy(a, b, c)	STRNCPY(a, b, c)
+#define	strrchr(a, b)		STRRCHR(a, b)
+#define	strtoul(a, b, c)	STRTOUL(a, b, c)
+#define	vsnprintf(a, b, c, d)	VSNPRINTF(a, b, c, d)
+
+/*
+ * !!!
+ * Don't #define memcpy to MEMCPY, even though it exists, because that results
+ * in a C pre-processor loop and compile failure.
+ *
+ * Don't #define memcpy to MEMMOVE directly, that results in failure as well.
+ */
+#define	memcpy			memmove
+
+/*
+ * BREW does not have concept of 'sync'.
+ *
+ * It depends on the implementation of the BREW on various platforms, but
+ * Mobilus confirms the version of BREW that ships to North America in 3G
+ * models has sync features guaranteeing safe physical writes whenever a
+ * write is performed using BREW API. Therefore, the issue is not on the
+ * applications running top of BREW, but the implementation of BREW itself
+ * that has to be checked in order to provide durability.
+ */
+#define	__os_fsync(a, b)	(0)
+#define	fflush(a)		(0)
+
+/*
+ * The ANSI C library functions for which we wrote local versions.
+ */
+int	   fclose(FILE *);
+int	   fgetc(FILE *);
+char	  *fgets(char *, int, FILE *);
+FILE	  *fopen(const char *, const char *);
+size_t	   fwrite(const void *, size_t, size_t, FILE *);
+char	  *getcwd(char *, size_t);
+struct tm *localtime(const time_t *);
+time_t	   time(time_t *);
+
+/*
+ * FILE_MANAGER_CREATE --
+ *	Instantiate file manager instance.
+ */
+#define	FILE_MANAGER_CREATE(dbenv, mgr, ret) do {			\
+	AEEApplet *__app = (AEEApplet *)GETAPPINSTANCE();		\
+	int __ret;							\
+	if ((__ret = ISHELL_CreateInstance(__app->m_pIShell,		\
+	    AEECLSID_FILEMGR, (void **)&(mgr))) == SUCCESS)		\
+		ret = 0;						\
+	else {								\
+		__db_syserr(dbenv, __ret, "ISHELL_CreateInstance");	\
+		ret = __os_posix_err(__ret);				\
+	}								\
+} while (0)
+
+/*
+ * FILE_MANAGER_ERR --
+ *	Handle file manager method error.
+ */
+#define	FILE_MANAGER_ERR(dbenv, mgr, name, op, ret) do {		\
+	int __ret;							\
+	__ret = IFILEMGR_GetLastError(mgr);				\
+	if ((name) == NULL)						\
+		__db_syserr(dbenv, __ret, "%s", op);			\
+	else								\
+		__db_syserr(dbenv, __ret, "%s: %s", name, op);		\
+	(ret) = __os_posix_err(__ret);					\
+} while (0)

build_brew/clib_port.h

@@ -0,0 +1,274 @@
+/* DO NOT EDIT: automatically built from dist/clib_port.in. */
+/*
+ * Minimum/maximum values for various types.
+ */
+#ifndef	UINT16_MAX			/* Maximum 16-bit unsigned. */
+#define	UINT16_MAX	65535
+#endif
+#ifndef	UINT32_MAX			/* Maximum 32-bit unsigned. */
+#define	UINT32_MAX	4294967295U
+#endif
+
+#ifndef	INT_MAX
+#if SIZEOF_INT == 4
+#define	INT_MAX		2147483647
+#endif
+#if SIZEOF_INT == 8
+#define	INT_MAX		9223372036854775807
+#endif
+#endif
+
+#ifndef	INT_MIN				/* minimum (signed) int value */
+#define	INT_MIN		(-INT_MAX-1)
+#endif
+
+#ifndef	UINT_MAX			/* maximum (signed) int value */
+#if SIZEOF_INT == 4
+#define	UINT_MAX	4294967295U
+#endif
+#if SIZEOF_INT == 8
+#define	UINT_MAX	18446744073709551615U
+#endif
+#endif
+
+#ifndef	LONG_MAX			/* maximum (signed) long value */
+#if SIZEOF_LONG == 4
+#define	LONG_MAX	2147483647
+#endif
+#if SIZEOF_LONG == 8
+#define	LONG_MAX	9223372036854775807L
+#endif
+#endif
+
+#ifndef	LONG_MIN			/* minimum (signed) long value */
+#define	LONG_MIN	(-LONG_MAX-1)
+#endif
+
+#ifndef	ULONG_MAX			/* maximum (unsigned) long value */
+#if SIZEOF_LONG == 4
+#define	ULONG_MAX	4294967295U
+#endif
+#if SIZEOF_LONG == 8
+#define	ULONG_MAX	18446744073709551615UL
+#endif
+#endif
+
+#if defined(HAVE_64BIT_TYPES)
+/*
+ * Override the system's 64-bit min/max constants.  AIX's 32-bit compiler can
+ * handle 64-bit values, but the system's constants don't include the LL/ULL
+ * suffix, and so can't be compiled using the 32-bit compiler.
+ */
+#undef	INT64_MAX
+#undef	INT64_MIN
+#undef	UINT64_MAX
+
+#ifdef	DB_WIN32
+#define	INT64_MAX	_I64_MAX
+#define	INT64_MIN	_I64_MIN
+#define	UINT64_MAX	_UI64_MAX
+#else
+#define	INT64_MAX	9223372036854775807LL
+#define	INT64_MIN	(-INT64_MAX-1)
+#define	UINT64_MAX	18446744073709551615ULL
+#endif	/* DB_WIN32 */
+
+#endif	/* HAVE_64BIT_TYPES */
+
+/*
+ * Exit success/failure macros.
+ */
+#ifndef	HAVE_EXIT_SUCCESS
+#define	EXIT_FAILURE	1
+#define	EXIT_SUCCESS	0
+#endif
+
+/*
+ * File modes.
+ */
+#ifdef DB_WIN32
+#ifndef S_IREAD				/* WinCE doesn't have S_IREAD. */
+#define	S_IREAD		0
+#endif
+#ifndef S_IWRITE			/* WinCE doesn't have S_IWRITE. */
+#define	S_IWRITE	0
+#endif
+#ifndef	S_IRUSR
+#define	S_IRUSR		S_IREAD		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		S_IWRITE	/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0		/* X for other */
+#endif
+#else /* !DB_WIN32 */
+#ifndef	S_IRUSR
+#define	S_IRUSR		0000400		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		0000200		/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0000100		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0000040		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0000020		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0000010		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0000004		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0000002		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0000001		/* X for other */
+#endif
+#endif /* !DB_WIN32 */
+
+/*
+ * Don't step on the namespace.  Other libraries may have their own
+ * implementations of these functions, we don't want to use their
+ * implementations or force them to use ours based on the load order.
+ */
+#ifndef	HAVE_ATOI
+#define	atoi		__db_Catoi
+#endif
+#ifndef	HAVE_ATOL
+#define	atol		__db_Catol
+#endif
+#ifndef	HAVE_FCLOSE
+#define	fclose		__db_Cfclose
+#endif
+#ifndef	HAVE_FGETC
+#define	fgetc		__db_Cfgetc
+#endif
+#ifndef	HAVE_FGETS
+#define	fgets		__db_Cfgets
+#endif
+#ifndef	HAVE_FOPEN
+#define	fopen		__db_Cfopen
+#endif
+#ifndef	HAVE_FWRITE
+#define	fwrite		__db_Cfwrite
+#endif
+#ifndef	HAVE_GETADDRINFO
+#define	freeaddrinfo(a)		__db_Cfreeaddrinfo(a)
+#define	getaddrinfo(a, b, c, d)	__db_Cgetaddrinfo(a, b, c, d)
+#endif
+#ifndef	HAVE_GETCWD
+#define	getcwd		__db_Cgetcwd
+#endif
+#ifndef	HAVE_GETOPT
+#define	getopt		__db_Cgetopt
+#define	optarg		__db_Coptarg
+#define	opterr		__db_Copterr
+#define	optind		__db_Coptind
+#define	optopt		__db_Coptopt
+#define	optreset	__db_Coptreset
+#endif
+#ifndef	HAVE_ISALPHA
+#define	isalpha		__db_Cisalpha
+#endif
+#ifndef	HAVE_ISDIGIT
+#define	isdigit		__db_Cisdigit
+#endif
+#ifndef	HAVE_ISPRINT
+#define	isprint		__db_Cisprint
+#endif
+#ifndef	HAVE_ISSPACE
+#define	isspace		__db_Cisspace
+#endif
+#ifndef	HAVE_LOCALTIME
+#define	localtime	__db_Clocaltime
+#endif
+#ifndef	HAVE_MEMCMP
+#define	memcmp		__db_Cmemcmp
+#endif
+#ifndef	HAVE_MEMCPY
+#define	memcpy		__db_Cmemcpy
+#endif
+#ifndef	HAVE_MEMMOVE
+#define	memmove		__db_Cmemmove
+#endif
+#ifndef	HAVE_PRINTF
+#define	printf		__db_Cprintf
+#define	fprintf		__db_Cfprintf
+#endif
+#ifndef	HAVE_QSORT
+#define	qsort		__db_Cqsort
+#endif
+#ifndef	HAVE_RAISE
+#define	raise		__db_Craise
+#endif
+#ifndef	HAVE_RAND
+#define	rand		__db_Crand
+#define	srand		__db_Csrand
+#endif
+#ifndef	HAVE_SNPRINTF
+#define	snprintf	__db_Csnprintf
+#endif
+#ifndef	HAVE_STRCASECMP
+#define	strcasecmp	__db_Cstrcasecmp
+#define	strncasecmp	__db_Cstrncasecmp
+#endif
+#ifndef	HAVE_STRCAT
+#define	strcat		__db_Cstrcat
+#endif
+#ifndef	HAVE_STRCHR
+#define	strchr		__db_Cstrchr
+#endif
+#ifndef	HAVE_STRDUP
+#define	strdup		__db_Cstrdup
+#endif
+#ifndef	HAVE_STRERROR
+#define	strerror	__db_Cstrerror
+#endif
+#ifndef	HAVE_STRNCAT
+#define	strncat		__db_Cstrncat
+#endif
+#ifndef	HAVE_STRNCMP
+#define	strncmp		__db_Cstrncmp
+#endif
+#ifndef	HAVE_STRRCHR
+#define	strrchr		__db_Cstrrchr
+#endif
+#ifndef	HAVE_STRSEP
+#define	strsep		__db_Cstrsep
+#endif
+#ifndef	HAVE_STRTOL
+#define	strtol		__db_Cstrtol
+#endif
+#ifndef	HAVE_STRTOUL
+#define	strtoul		__db_Cstrtoul
+#endif
+#ifndef	HAVE_TIME
+#define	time		__db_Ctime
+#endif
+#ifndef	HAVE_VSNPRINTF
+#define	vsnprintf	__db_Cvsnprintf
+#endif

build_brew/db_config.h

@@ -0,0 +1,573 @@
+/* DO NOT EDIT: automatically built by dist/s_brew. */
+/* Define to 1 if you want to build a version for running the test suite. */
+/* #undef CONFIG_TEST */
+
+/* We use DB_WIN32 much as one would use _WIN32 -- to specify that we're using
+   an operating system environment that supports Win32 calls and semantics. We
+   don't use _WIN32 because Cygwin/GCC also defines _WIN32, even though
+   Cygwin/GCC closely emulates the Unix environment. */
+/* #undef DB_WIN32 */
+
+/* Define to 1 if you want a debugging version. */
+#if defined(_DEBUG)
+#if !defined(DEBUG)
+#define DEBUG 1
+#endif
+#endif
+
+/* Define to 1 if you want a version that logs read operations. */
+/* #undef DEBUG_ROP */
+
+/* Define to 1 if you want a version that logs write operations. */
+/* #undef DEBUG_WOP */
+
+/* Define to 1 if you want a version with run-time diagnostic checking. */
+/* #undef DIAGNOSTIC */
+
+/* Define to 1 if 64-bit types are available. */
+/* #undef HAVE_64BIT_TYPES */
+
+/* Define to 1 if you have the `abort' function. */
+/* #undef HAVE_ABORT */
+
+/* Define to 1 if you have the `atoi' function. */
+#define HAVE_ATOI 1
+
+/* Define to 1 if you have the `atol' function. */
+/* #undef HAVE_ATOL */
+
+/* Define to 1 if you have the `backtrace' function. */
+/* #undef HAVE_BACKTRACE */
+
+/* Define to 1 if you have the `backtrace_symbols' function. */
+/* #undef HAVE_BACKTRACE_SYMBOLS */
+
+/* Define to 1 if building BREW. */
+#define HAVE_BREW 1
+
+/* Define to 1 if building on BREW (SDK2). */
+#define HAVE_BREW_SDK2 1
+
+/* Define to 1 if you have the `clock_gettime' function. */
+/* #undef HAVE_CLOCK_GETTIME */
+
+/* Define to 1 if clock_gettime supports CLOCK_MONOTONIC. */
+/* #undef HAVE_CLOCK_MONOTONIC */
+
+/* Define to 1 if Berkeley DB release includes strong cryptography. */
+/* #undef HAVE_CRYPTO */
+
+/* Define to 1 if you have the `ctime_r' function. */
+/* #undef HAVE_CTIME_R  */
+
+/* Define to 1 if ctime_r takes a buffer length as a third argument. */
+/* #undef HAVE_CTIME_R_3ARG */
+
+/* Define to 1 if you have the `directio' function. */
+/* #undef HAVE_DIRECTIO */
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_DIRENT_H */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+/* #undef HAVE_DLFCN_H */
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+/* #undef HAVE_EXECINFO_H */
+
+/* Define to 1 if you have EXIT_SUCCESS/EXIT_FAILURE #defines. */
+#define HAVE_EXIT_SUCCESS 1
+
+/* Define to 1 if you have the `fchmod' function. */
+/* #undef HAVE_FCHMOD */
+
+/* Define to 1 if you have the `fclose' function. */
+/* #undef HAVE_FCLOSE */
+
+/* Define to 1 if you have the `fcntl' function. */
+/* #undef HAVE_FCNTL */
+
+/* Define to 1 if fcntl/F_SETFD denies child access to file descriptors. */
+/* #undef HAVE_FCNTL_F_SETFD */
+
+/* Define to 1 if you have the `fdatasync' function. */
+/* #undef HAVE_FDATASYNC */
+
+/* Define to 1 if you have the `fgetc' function. */
+/* #undef HAVE_FGETC */
+
+/* Define to 1 if you have the `fgets' function. */
+/* #undef HAVE_FGETS */
+
+/* Define to 1 if allocated filesystem blocks are not zeroed. */
+#define HAVE_FILESYSTEM_NOTZERO 1
+
+/* Define to 1 if you have the `fopen' function. */
+/* #undef HAVE_FOPEN */
+
+/* Define to 1 if you have the `ftruncate' function. */
+#define HAVE_FTRUNCATE 1
+
+/* Define to 1 if you have the `fwrite' function. */
+/* #undef HAVE_FWRITE */
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+/* #undef HAVE_GETADDRINFO */
+
+/* Define to 1 if you have the `getcwd' function. */
+/* #undef HAVE_GETCWD */
+
+/* Define to 1 if you have the `getenv' function. */
+/* #undef HAVE_GETENV */
+
+/* Define to 1 if you have the `getgid' function. */
+#define HAVE_GETGID 1
+
+/* Define to 1 if you have the `getopt' function. */
+/* #undef HAVE_GETOPT */
+
+/* Define to 1 if getopt supports the optreset variable. */
+/* #undef HAVE_GETOPT_OPTRESET */
+
+/* Define to 1 if you have the `getrusage' function. */
+/* #undef HAVE_GETRUSAGE */
+
+/* Define to 1 if you have the `gettimeofday' function. */
+/* #undef HAVE_GETTIMEOFDAY */
+
+/* Define to 1 if you have the `getuid' function. */
+/* #undef HAVE_GETUID */
+
+/* Define to 1 if building Hash access method. */
+/* #undef HAVE_HASH */
+
+/* Define to 1 if you have the `hstrerror' function. */
+/* #undef HAVE_HSTRERROR */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+/* #undef HAVE_INTTYPES_H */
+
+/* Define to 1 if you have the `isspace' function. */
+/* #undef HAVE_ISALPHA  */
+
+/* Define to 1 if you have the `isspace' function. */
+/* #undef HAVE_ISDIGIT  */
+
+/* Define to 1 if you have the `isspace' function. */
+/* #undef HAVE_ISPRINT  */
+
+/* Define to 1 if you have the `isspace' function. */
+/* #undef HAVE_ISSPACE  */
+
+/* Define to 1 if you have the `localtime' function. */
+/* #undef HAVE_LOCALTIME */
+
+/* Define to 1 if you have the `memcmp' function. */
+#define HAVE_MEMCMP 1
+
+/* Define to 1 if you have the `memcpy' function. */
+#define HAVE_MEMCPY 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+/* #undef HAVE_MEMORY_H */
+
+/* Define to 1 if you have the `mlock' function. */
+/* #undef HAVE_MLOCK */
+
+/* Define to 1 if you have the `mmap' function. */
+/* #undef HAVE_MMAP */
+
+/* Define to 1 if you have the `mprotect' function. */
+/* #undef HAVE_MPROTECT */
+
+/* Define to 1 if you have the `munlock' function. */
+/* #undef HAVE_MUNLOCK */
+
+/* Define to 1 if you have the `munmap' function. */
+/* #undef HAVE_MUNMAP */
+
+/* Define to 1 to use the GCC compiler and 68K assembly language mutexes. */
+/* #undef HAVE_MUTEX_68K_GCC_ASSEMBLY */
+
+/* Define to 1 to use the AIX _check_lock mutexes. */
+/* #undef HAVE_MUTEX_AIX_CHECK_LOCK */
+
+/* Define to 1 to use the GCC compiler and Alpha assembly language mutexes. */
+/* #undef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and ARM assembly language mutexes. */
+/* #undef HAVE_MUTEX_ARM_GCC_ASSEMBLY */
+
+/* Define to 1 to use the Apple/Darwin _spin_lock_try mutexes. */
+/* #undef HAVE_MUTEX_DARWIN_SPIN_LOCK_TRY */
+
+/* Define to 1 to use the UNIX fcntl system call mutexes. */
+/* #undef HAVE_MUTEX_FCNTL */
+
+/* Define to 1 to use the GCC compiler and PaRisc assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_HPPA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on HP-UX. */
+/* #undef HAVE_MUTEX_HPPA_MSEM_INIT */
+
+/* Define to 1 to use test-and-set mutexes with blocking mutexes. */
+/* #undef HAVE_MUTEX_HYBRID */
+
+/* Define to 1 to use the GCC compiler and IA64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_IA64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and MIPS assembly language mutexes. */
+/* #undef HAVE_MUTEX_MIPS_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on systems other than HP-UX. */
+/* #undef HAVE_MUTEX_MSEM_INIT */
+
+/* Define to 1 to use the GCC compiler and PowerPC assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_PPC_GCC_ASSEMBLY */
+
+/* Define to 1 to use POSIX 1003.1 pthread_XXX mutexes. */
+/* #undef HAVE_MUTEX_PTHREADS */
+
+/* Define to 1 to use Reliant UNIX initspin mutexes. */
+/* #undef HAVE_MUTEX_RELIANTUNIX_INITSPIN */
+
+/* Define to 1 to use the IBM C compiler and S/390 assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_S390_CC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and S/390 assembly language mutexes. */
+/* #undef HAVE_MUTEX_S390_GCC_ASSEMBLY */
+
+/* Define to 1 to use the SCO compiler and x86 assembly language mutexes. */
+/* #undef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY */
+
+/* Define to 1 to use the obsolete POSIX 1003.1 sema_XXX mutexes. */
+/* #undef HAVE_MUTEX_SEMA_INIT */
+
+/* Define to 1 to use the SGI XXX_lock mutexes. */
+/* #undef HAVE_MUTEX_SGI_INIT_LOCK */
+
+/* Define to 1 to use the Solaris _lock_XXX mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LOCK_TRY */
+
+/* Define to 1 to use the Solaris lwp threads mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LWP */
+
+/* Define to 1 to use the GCC compiler and Sparc assembly language mutexes. */
+/* #undef HAVE_MUTEX_SPARC_GCC_ASSEMBLY */
+
+/* Define to 1 if the Berkeley DB library should support mutexes. */
+/* #undef HAVE_MUTEX_SUPPORT */
+
+/* Define to 1 if mutexes hold system resources. */
+/* #undef HAVE_MUTEX_SYSTEM_RESOURCES */
+
+/* Define to 1 to configure mutexes intra-process only. */
+/* #undef HAVE_MUTEX_THREAD_ONLY */
+
+/* Define to 1 to use the CC compiler and Tru64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_TRU64_CC_ASSEMBLY */
+
+/* Define to 1 to use the UNIX International mutexes. */
+/* #undef HAVE_MUTEX_UI_THREADS */
+
+/* Define to 1 to use the UTS compiler and assembly language mutexes. */
+/* #undef HAVE_MUTEX_UTS_CC_ASSEMBLY */
+
+/* Define to 1 to use VMS mutexes. */
+/* #undef HAVE_MUTEX_VMS */
+
+/* Define to 1 to use VxWorks mutexes. */
+/* #undef HAVE_MUTEX_VXWORKS */
+
+/* Define to 1 to use the MSVC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32 */
+
+/* Define to 1 to use the GCC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32_GCC */
+
+/* Define to 1 to use the GCC compiler and 64-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and 32-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_GCC_ASSEMBLY */
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the O_DIRECT flag. */
+/* #undef HAVE_O_DIRECT */
+
+/* Define to 1 if you have the `pread' function. */
+/* #undef HAVE_PREAD */
+
+/* Define to 1 if you have the `printf' function. */
+/* #undef HAVE_PRINTF */
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 to configure Berkeley DB for POSIX pthread API. */
+/* #undef HAVE_PTHREAD_API */
+
+/* Define to 1 if you have the `pthread_yield' function. */
+/* #undef HAVE_PTHREAD_YIELD */
+
+/* Define to 1 if you have the `pwrite' function. */
+/* #undef HAVE_PWRITE */
+
+/* Define to 1 if building on QNX. */
+/* #undef HAVE_QNX */
+
+/* Define to 1 if you have the `qsort' function. */
+/* #undef HAVE_QSORT */
+
+/* Define to 1 if building Queue access method. */
+/* #undef HAVE_QUEUE */
+
+/* Define to 1 if you have the `raise' function. */
+/* #undef HAVE_RAISE */
+
+/* Define to 1 if you have the `rand' function. */
+/* #undef HAVE_RAND */
+
+/* Define to 1 if building replication support. */
+/* #undef HAVE_REPLICATION */
+
+/* Define to 1 if building the Berkeley DB replication framework. */
+/* #undef HAVE_REPLICATION_THREADS */
+
+/* Define to 1 if building RPC client/server. */
+/* #undef HAVE_RPC */
+
+/* Define to 1 if building on S60. */
+/* #undef HAVE_S60 */
+
+/* Define to 1 if you have the `sched_yield' function. */
+/* #undef HAVE_SCHED_YIELD */
+
+/* Define to 1 if you have the `select' function. */
+/* #undef HAVE_SELECT */
+
+/* Define to 1 if you have the `setgid' function. */
+#define HAVE_SETGID 1
+
+/* Define to 1 if you have the `setuid' function. */
+#define HAVE_SETUID 1
+
+/* Define to 1 if shmctl/SHM_LOCK locks down shared memory segments. */
+/* #undef HAVE_SHMCTL_SHM_LOCK */
+
+/* Define to 1 if you have the `shmget' function. */
+/* #undef HAVE_SHMGET */
+
+/* Define to 1 if you have the `sigaction' function. */
+/* #undef HAVE_SIGACTION */
+
+/* Define to 1 if thread identifier type db_threadid_t is integral. */
+/* #undef HAVE_SIMPLE_THREAD_TYPE */
+
+/* Define to 1 if you have the `snprintf' function. */
+#define HAVE_SNPRINTF 1
+
+/* Define to 1 if you have the `stat' function. */
+/* #undef HAVE_STAT */
+
+/* Define to 1 if building statistics support. */
+/* #undef HAVE_STATISTICS */
+
+/* Define to 1 if you have the <stdint.h> header file. */
+/* #undef HAVE_STDINT_H */
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+/* #undef HAVE_STDLIB_H */
+
+/* Define to 1 if you have the `strcasecmp' function. */
+/* #undef HAVE_STRCASECMP */
+
+/* Define to 1 if you have the `strcat' function. */
+#define HAVE_STRCAT 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strdup' function. */
+#define HAVE_STRDUP 1
+
+/* Define to 1 if you have the `strerror' function. */
+/* #undef HAVE_STRERROR */
+
+/* Define to 1 if you have the `strftime' function. */
+/* #undef HAVE_STRFTIME */
+
+/* Define to 1 if you have the <strings.h> header file. */
+/* #undef HAVE_STRINGS_H */
+
+/* Define to 1 if you have the <string.h> header file. */
+/* #undef HAVE_STRING_H */
+
+/* Define to 1 if you have the `strncat' function. */
+/* #undef HAVE_STRNCAT */
+
+/* Define to 1 if you have the `strncmp' function. */
+#define HAVE_STRNCMP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strsep' function. */
+/* #undef HAVE_STRSEP */
+
+/* Define to 1 if you have the `strtol' function. */
+/* #undef HAVE_STRTOL */
+
+/* Define to 1 if you have the `strtoul' function. */
+#define	HAVE_STRTOUL 1
+
+/* Define to 1 if `st_blksize' is member of `struct stat'. */
+/* #undef HAVE_STRUCT_STAT_ST_BLKSIZE */
+
+/* Define to 1 if you have the `sysconf' function. */
+/* #undef HAVE_SYSCONF */
+
+/* Define to 1 if port includes files in the Berkeley DB source code. */
+/* #undef HAVE_SYSTEM_INCLUDE_FILES */
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+/* #undef HAVE_SYS_SELECT_H */
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+/* #undef HAVE_SYS_SOCKET_H */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+/* #undef HAVE_SYS_STAT_H */
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+/* #undef HAVE_SYS_TIME_H */
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+/* #undef HAVE_SYS_TYPES_H 1*/
+
+/* Define to 1 if you have the `time' function. */
+/* #undef HAVE_TIME */
+
+/* Define to 1 if you have the <unistd.h> header file. */
+/* #undef HAVE_UNISTD_H */
+
+/* Define to 1 if unlink of file with open file descriptors will fail. */
+/* #undef HAVE_UNLINK_WITH_OPEN_FAILURE */
+
+/* Define to 1 if port includes historic database upgrade support. */
+/* #undef HAVE_UPGRADE_SUPPORT */
+
+/* Define to 1 if building access method verification support. */
+/* #undef HAVE_VERIFY */
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#define HAVE_VSNPRINTF 1
+
+/* Define to 1 if building VxWorks. */
+/* #undef HAVE_VXWORKS */
+
+/* Define to 1 if you have the `yield' function. */
+/* #undef HAVE_YIELD */
+
+/* Define to 1 if you have the `_fstati64' function. */
+/* #undef HAVE__FSTATI64 1*/
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "support@sleepycat.com"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "Berkeley DB"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "Berkeley DB 4.7.25"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "db-4.7.25"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.7.25"
+
+/* The size of a `char', as computed by sizeof. */
+#define SIZEOF_CHAR 1
+
+/* The size of a `char *', as computed by sizeof. */
+#define SIZEOF_CHAR_P 4
+
+/* The size of a `int', as computed by sizeof. */
+#define SIZEOF_INT 4
+
+/* The size of a `long', as computed by sizeof. */
+#define SIZEOF_LONG 4
+
+/* The size of a `long long', as computed by sizeof. */
+/* #undef SIZEOF_LONG_LONG */
+
+/* The size of a `short', as computed by sizeof. */
+#define SIZEOF_SHORT 2
+
+/* The size of a `size_t', as computed by sizeof. */
+#define SIZEOF_SIZE_T 4
+
+/* The size of a `unsigned char', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_CHAR 1
+
+/* The size of a `unsigned int', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_INT 4
+
+/* The size of a `unsigned long', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_LONG 4
+
+/* The size of a `unsigned long long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG_LONG */
+
+/* The size of a `unsigned short', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_SHORT 2
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+/* #undef TIME_WITH_SYS_TIME */
+
+/* Define to 1 to mask harmless uninitialized memory read/writes. */
+/* #undef UMRW */
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#define inline
+#endif
+
+/* type to use in place of socklen_t if not defined */
+/* #undef socklen_t */

build_brew/db_int.h

@@ -0,0 +1,914 @@
+/* DO NOT EDIT: automatically built by dist/s_brew. */
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_int.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#ifndef _DB_INT_H_
+#define	_DB_INT_H_
+
+/*******************************************************
+ * Berkeley DB ANSI/POSIX include files.
+ *******************************************************/
+#ifdef HAVE_SYSTEM_INCLUDE_FILES
+#include <sys/types.h>
+#ifdef DIAG_MVCC
+#include <sys/mman.h>
+#endif
+#include <sys/stat.h>
+
+#if defined(__INCLUDE_SELECT_H)
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#ifdef HAVE_VXWORKS
+#include <selectLib.h>
+#endif
+#endif
+
+#if TIME_WITH_SYS_TIME
+#include <sys/time.h>
+#include <time.h>
+#else
+#if HAVE_SYS_TIME_H
+#include <sys/time.h>
+#else
+#include <time.h>
+#endif
+#endif
+
+#ifdef HAVE_VXWORKS
+#include <net/uio.h>
+#else
+#include <sys/uio.h>
+#endif
+
+#if defined(__INCLUDE_NETWORKING)
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#include <netinet/in.h>
+#include <netdb.h>
+#include <arpa/inet.h>
+#endif
+
+#if defined(STDC_HEADERS) || defined(__cplusplus)
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <signal.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#if defined(__INCLUDE_DIRECTORY)
+#if HAVE_DIRENT_H
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# if HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# if HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# if HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif
+#endif /* __INCLUDE_DIRECTORY */
+
+#endif /* !HAVE_SYSTEM_INCLUDE_FILES */
+#include "brew_db.h"
+
+#ifdef DB_WIN32
+#include "dbinc/win_db.h"
+#endif
+
+#include "db.h"
+#include "clib_port.h"
+
+#include "dbinc/queue.h"
+#include "dbinc/shqueue.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*******************************************************
+ * Forward structure declarations.
+ *******************************************************/
+struct __db_reginfo_t;	typedef struct __db_reginfo_t REGINFO;
+struct __db_txnhead;	typedef struct __db_txnhead DB_TXNHEAD;
+struct __db_txnlist;	typedef struct __db_txnlist DB_TXNLIST;
+struct __vrfy_childinfo;typedef struct __vrfy_childinfo VRFY_CHILDINFO;
+struct __vrfy_dbinfo;   typedef struct __vrfy_dbinfo VRFY_DBINFO;
+struct __vrfy_pageinfo; typedef struct __vrfy_pageinfo VRFY_PAGEINFO;
+
+typedef SH_TAILQ_HEAD(__hash_head) DB_HASHTAB;
+
+/*******************************************************
+ * General purpose constants and macros.
+ *******************************************************/
+#undef	FALSE
+#define	FALSE		0
+#undef	TRUE
+#define	TRUE		(!FALSE)
+
+#define	MEGABYTE	1048576
+#define	GIGABYTE	1073741824
+
+#define	NS_PER_MS	1000000		/* Nanoseconds in a millisecond */
+#define	NS_PER_US	1000		/* Nanoseconds in a microsecond */
+#define	NS_PER_SEC	1000000000	/* Nanoseconds in a second */
+#define	US_PER_MS	1000		/* Microseconds in a millisecond */
+#define	US_PER_SEC	1000000		/* Microseconds in a second */
+#define	MS_PER_SEC	1000		/* Milliseconds in a second */
+
+#define	RECNO_OOB	0		/* Illegal record number. */
+
+/* Test for a power-of-two (tests true for zero, which doesn't matter here). */
+#define	POWER_OF_TWO(x)	(((x) & ((x) - 1)) == 0)
+
+/* Test for valid page sizes. */
+#define	DB_MIN_PGSIZE	0x000200	/* Minimum page size (512). */
+#define	DB_MAX_PGSIZE	0x010000	/* Maximum page size (65536). */
+#define	IS_VALID_PAGESIZE(x)						\
+	(POWER_OF_TWO(x) && (x) >= DB_MIN_PGSIZE && ((x) <= DB_MAX_PGSIZE))
+
+/* Minimum number of pages cached, by default. */
+#define	DB_MINPAGECACHE	16
+
+/*
+ * If we are unable to determine the underlying filesystem block size, use
+ * 8K on the grounds that most OS's use less than 8K for a VM page size.
+ */
+#define	DB_DEF_IOSIZE	(8 * 1024)
+
+/* Align an integer to a specific boundary. */
+#undef	DB_ALIGN
+#define	DB_ALIGN(v, bound)						\
+	(((v) + (bound) - 1) & ~(((uintmax_t)(bound)) - 1))
+
+/* Increment a pointer to a specific boundary. */
+#undef	ALIGNP_INC
+#define	ALIGNP_INC(p, bound)						\
+	(void *)(((uintptr_t)(p) + (bound) - 1) & ~(((uintptr_t)(bound)) - 1))
+
+/*
+ * Print an address as a u_long (a u_long is the largest type we can print
+ * portably).  Most 64-bit systems have made longs 64-bits, so this should
+ * work.
+ */
+#define	P_TO_ULONG(p)	((u_long)(uintptr_t)(p))
+
+/*
+ * Convert a pointer to a small integral value.
+ *
+ * The (u_int16_t)(uintptr_t) cast avoids warnings: the (uintptr_t) cast
+ * converts the value to an integral type, and the (u_int16_t) cast converts
+ * it to a small integral type so we don't get complaints when we assign the
+ * final result to an integral type smaller than uintptr_t.
+ */
+#define	P_TO_UINT32(p)	((u_int32_t)(uintptr_t)(p))
+#define	P_TO_UINT16(p)	((u_int16_t)(uintptr_t)(p))
+
+/*
+ * There are several on-page structures that are declared to have a number of
+ * fields followed by a variable length array of items.  The structure size
+ * without including the variable length array or the address of the first of
+ * those elements can be found using SSZ.
+ *
+ * This macro can also be used to find the offset of a structure element in a
+ * structure.  This is used in various places to copy structure elements from
+ * unaligned memory references, e.g., pointers into a packed page.
+ *
+ * There are two versions because compilers object if you take the address of
+ * an array.
+ */
+#undef	SSZ
+#define	SSZ(name, field)  P_TO_UINT16(&(((name *)0)->field))
+
+#undef	SSZA
+#define	SSZA(name, field) P_TO_UINT16(&(((name *)0)->field[0]))
+
+/* Structure used to print flag values. */
+typedef struct __fn {
+	u_int32_t mask;			/* Flag value. */
+	const char *name;		/* Flag name. */
+} FN;
+
+/* Set, clear and test flags. */
+#define	FLD_CLR(fld, f)		(fld) &= ~(f)
+#define	FLD_ISSET(fld, f)	((fld) & (f))
+#define	FLD_SET(fld, f)		(fld) |= (f)
+#define	F_CLR(p, f)		(p)->flags &= ~(f)
+#define	F_ISSET(p, f)		((p)->flags & (f))
+#define	F_SET(p, f)		(p)->flags |= (f)
+#define	LF_CLR(f)		((flags) &= ~(f))
+#define	LF_ISSET(f)		((flags) & (f))
+#define	LF_SET(f)		((flags) |= (f))
+
+/*
+ * Calculate a percentage.  The values can overflow 32-bit integer arithmetic
+ * so we use floating point.
+ *
+ * When calculating a bytes-vs-page size percentage, we're getting the inverse
+ * of the percentage in all cases, that is, we want 100 minus the percentage we
+ * calculate.
+ */
+#define	DB_PCT(v, total)						\
+	((int)((total) == 0 ? 0 : ((double)(v) * 100) / (total)))
+#define	DB_PCT_PG(v, total, pgsize)					\
+	((int)((total) == 0 ? 0 :					\
+	    100 - ((double)(v) * 100) / (((double)total) * (pgsize))))
+
+/*
+ * Statistics update shared memory and so are expensive -- don't update the
+ * values unless we're going to display the results.
+ */
+#undef	STAT
+#ifdef	HAVE_STATISTICS
+#define	STAT(x)	x
+#else
+#define	STAT(x)
+#endif
+
+/*
+ * Structure used for callback message aggregation.
+ *
+ * Display values in XXX_stat_print calls.
+ */
+typedef struct __db_msgbuf {
+	char *buf;			/* Heap allocated buffer. */
+	char *cur;			/* Current end of message. */
+	size_t len;			/* Allocated length of buffer. */
+} DB_MSGBUF;
+#define	DB_MSGBUF_INIT(a) do {						\
+	(a)->buf = (a)->cur = NULL;					\
+	(a)->len = 0;							\
+} while (0)
+#define	DB_MSGBUF_FLUSH(env, a) do {					\
+	if ((a)->buf != NULL) {						\
+		if ((a)->cur != (a)->buf)				\
+			__db_msg(env, "%s", (a)->buf);		\
+		__os_free(env, (a)->buf);				\
+		DB_MSGBUF_INIT(a);					\
+	}								\
+} while (0)
+#define	STAT_FMT(msg, fmt, type, v) do {				\
+	DB_MSGBUF __mb;							\
+	DB_MSGBUF_INIT(&__mb);						\
+	__db_msgadd(env, &__mb, fmt, (type)(v));			\
+	__db_msgadd(env, &__mb, "\t%s", msg);				\
+	DB_MSGBUF_FLUSH(env, &__mb);					\
+} while (0)
+#define	STAT_HEX(msg, v)						\
+	__db_msg(env, "%#lx\t%s", (u_long)(v), msg)
+#define	STAT_ISSET(msg, p)						\
+	__db_msg(env, "%sSet\t%s", (p) == NULL ? "!" : " ", msg)
+#define	STAT_LONG(msg, v)						\
+	__db_msg(env, "%ld\t%s", (long)(v), msg)
+#define	STAT_LSN(msg, lsnp)						\
+	__db_msg(env, "%lu/%lu\t%s",					\
+	    (u_long)(lsnp)->file, (u_long)(lsnp)->offset, msg)
+#define	STAT_POINTER(msg, v)						\
+	__db_msg(env, "%#lx\t%s", P_TO_ULONG(v), msg)
+#define	STAT_STRING(msg, p) do {					\
+	const char *__p = p;	/* p may be a function call. */		\
+	__db_msg(env, "%s\t%s", __p == NULL ? "!Set" : __p, msg);	\
+} while (0)
+#define	STAT_ULONG(msg, v)						\
+	__db_msg(env, "%lu\t%s", (u_long)(v), msg)
+
+/*
+ * There are quite a few places in Berkeley DB where we want to initialize
+ * a DBT from a string or other random pointer type, using a length typed
+ * to size_t in most cases.  This macro avoids a lot of casting.  The macro
+ * comes in two flavors because we often want to clear the DBT first.
+ */
+#define	DB_SET_DBT(dbt, d, s)  do {					\
+	(dbt).data = (void *)(d);					\
+	(dbt).size = (u_int32_t)(s);					\
+} while (0)
+#define	DB_INIT_DBT(dbt, d, s)  do {					\
+	memset(&(dbt), 0, sizeof(dbt));					\
+	DB_SET_DBT(dbt, d, s);						\
+} while (0)
+
+/*******************************************************
+ * API return values
+ *******************************************************/
+/*
+ * Return values that are OK for each different call.  Most calls have a
+ * standard 'return of 0 is only OK value', but some, like db->get have
+ * DB_NOTFOUND as a return value, but it really isn't an error.
+ */
+#define	DB_RETOK_STD(ret)	((ret) == 0)
+#define	DB_RETOK_DBCDEL(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCGET(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBDEL(ret)	DB_RETOK_DBCDEL(ret)
+#define	DB_RETOK_DBGET(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_DBPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST)
+#define	DB_RETOK_EXISTS(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_LGGET(ret)	((ret) == 0 || (ret) == DB_NOTFOUND)
+#define	DB_RETOK_MPGET(ret)	((ret) == 0 || (ret) == DB_PAGE_NOTFOUND)
+#define	DB_RETOK_REPPMSG(ret)	((ret) == 0 || \
+				    (ret) == DB_REP_IGNORE || \
+				    (ret) == DB_REP_ISPERM || \
+				    (ret) == DB_REP_NEWMASTER || \
+				    (ret) == DB_REP_NEWSITE || \
+				    (ret) == DB_REP_NOTPERM)
+
+/* Find a reasonable operation-not-supported error. */
+#ifdef	EOPNOTSUPP
+#define	DB_OPNOTSUP	EOPNOTSUPP
+#else
+#ifdef	ENOTSUP
+#define	DB_OPNOTSUP	ENOTSUP
+#else
+#define	DB_OPNOTSUP	EINVAL
+#endif
+#endif
+
+/*******************************************************
+ * Files.
+ *******************************************************/
+/*
+ * We use 1024 as the maximum path length.  It's too hard to figure out what
+ * the real path length is, as it was traditionally stored in <sys/param.h>,
+ * and that file isn't always available.
+ */
+#define	DB_MAXPATHLEN	1024
+
+#define	PATH_DOT	"."	/* Current working directory. */
+				/* Path separator character(s). */
+#define	PATH_SEPARATOR	"\\/:"
+
+/*******************************************************
+ * Environment.
+ *******************************************************/
+/* Type passed to __db_appname(). */
+typedef enum {
+	DB_APP_NONE=0,			/* No type (region). */
+	DB_APP_DATA,			/* Data file. */
+	DB_APP_LOG,			/* Log file. */
+	DB_APP_TMP			/* Temporary file. */
+} APPNAME;
+
+/*
+ * A set of macros to check if various functionality has been configured.
+ *
+ * ALIVE_ON	The is_alive function is configured.
+ * CDB_LOCKING	CDB product locking.
+ * CRYPTO_ON	Security has been configured.
+ * LOCKING_ON	Locking has been configured.
+ * LOGGING_ON	Logging has been configured.
+ * MUTEX_ON	Mutexes have been configured.
+ * MPOOL_ON	Memory pool has been configured.
+ * REP_ON	Replication has been configured.
+ * RPC_ON	RPC has been configured.
+ * TXN_ON	Transactions have been configured.
+ *
+ * REP_ON is more complex than most: if the BDB library was compiled without
+ * replication support, ENV->rep_handle will be NULL; if the BDB library has
+ * replication support, but it was not configured, the region reference will
+ * be NULL.
+ */
+#define	ALIVE_ON(env)		((env)->dbenv->is_alive != NULL)
+#define	CDB_LOCKING(env)	F_ISSET(env, ENV_CDB)
+#define	CRYPTO_ON(env)		((env)->crypto_handle != NULL)
+#define	LOCKING_ON(env)		((env)->lk_handle != NULL)
+#define	LOGGING_ON(env)		((env)->lg_handle != NULL)
+#define	MPOOL_ON(env)		((env)->mp_handle != NULL)
+#define	MUTEX_ON(env)		((env)->mutex_handle != NULL)
+#define	REP_ON(env)							\
+	((env)->rep_handle != NULL && (env)->rep_handle->region != NULL)
+#define	RPC_ON(dbenv)		((dbenv)->cl_handle != NULL)
+#define	TXN_ON(env)		((env)->tx_handle != NULL)
+
+/*
+ * STD_LOCKING	Standard locking, that is, locking was configured and CDB
+ *		was not.  We do not do locking in off-page duplicate trees,
+ *		so we check for that in the cursor first.
+ */
+#define	STD_LOCKING(dbc)						\
+	(!F_ISSET(dbc, DBC_OPD) &&					\
+	    !CDB_LOCKING((dbc)->env) && LOCKING_ON((dbc)->env))
+
+/*
+ * IS_RECOVERING: The system is running recovery.
+ */
+#define	IS_RECOVERING(env)						\
+	(LOGGING_ON(env) && F_ISSET((env)->lg_handle, DBLOG_RECOVER))
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	ENV_ILLEGAL_AFTER_OPEN(env, name)				\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 1));
+#define	ENV_ILLEGAL_BEFORE_OPEN(env, name)				\
+	if (!F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 0));
+
+/* We're not actually user hostile, honest. */
+#define	ENV_REQUIRES_CONFIG(env, handle, i, flags)			\
+	if (handle == NULL)						\
+		return (__env_not_config(env, i, flags));
+#define	ENV_REQUIRES_CONFIG_XX(env, handle, i, flags)			\
+	if ((env)->handle->region == NULL)				\
+		return (__env_not_config(env, i, flags));
+#define	ENV_NOT_CONFIGURED(env, handle, i, flags)			\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		ENV_REQUIRES_CONFIG(env, handle, i, flags)
+
+#define	ENV_ENTER(env, ip) do {						\
+	int __ret;							\
+	PANIC_CHECK(env);						\
+	if ((env)->thr_hashtab == NULL)					\
+		ip = NULL;						\
+	else {								\
+		if ((__ret =						\
+		    __env_set_state(env, &(ip), THREAD_ACTIVE)) != 0)	\
+			return (__ret);					\
+	}								\
+} while (0)
+
+#define ENV_GET_THREAD_INFO(env, ip) ENV_ENTER(env, ip)
+
+#ifdef DIAGNOSTIC
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL) {						\
+		DB_ASSERT(env, (ip)->dbth_state == THREAD_ACTIVE);	\
+		(ip)->dbth_state = THREAD_OUT;				\
+	}								\
+} while (0)
+#else
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL)						\
+		(ip)->dbth_state = THREAD_OUT;				\
+} while (0)
+#endif
+#ifdef DIAGNOSTIC
+#define	CHECK_THREAD(env) do {						\
+	if ((env)->thr_hashtab != NULL)					\
+		(void)__env_set_state(env, NULL, THREAD_VERIFY);	\
+} while (0)
+#ifdef HAVE_STATISTICS
+#define	CHECK_MTX_THREAD(env, mtx) do {					\
+	if (mtx->alloc_id != MTX_MUTEX_REGION &&			\
+	    mtx->alloc_id != MTX_ENV_REGION &&				\
+	    mtx->alloc_id != MTX_APPLICATION)				\
+		CHECK_THREAD(env);					\
+} while (0)
+#else
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+#else
+#define	CHECK_THREAD(env)
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+
+typedef enum {
+	THREAD_SLOT_NOT_IN_USE=0,
+	THREAD_OUT,
+	THREAD_ACTIVE,
+	THREAD_BLOCKED,
+	THREAD_BLOCKED_DEAD
+#ifdef DIAGNOSTIC
+	, THREAD_VERIFY
+#endif
+} DB_THREAD_STATE;
+
+typedef struct __pin_list {
+	roff_t b_ref;		/* offset to buffer. */
+	int region;		/* region containing buffer. */
+} PIN_LIST;
+#define PINMAX 4
+
+struct __db_thread_info {
+	pid_t		dbth_pid;
+	db_threadid_t	dbth_tid;
+	DB_THREAD_STATE	dbth_state;
+	SH_TAILQ_ENTRY	dbth_links;
+	/*
+	 * The following fields track which buffers this thread of 
+	 * control has pinned in the mpool buffer cache.
+	 */
+	u_int16_t	dbth_pincount;	/* Number of pins for this thread. */
+	u_int16_t	dbth_pinmax;	/* Number of slots allocated. */
+	roff_t		dbth_pinlist;	/* List of pins. */
+	PIN_LIST	dbth_pinarray[PINMAX];	/* Initial array of slots. */
+};
+
+typedef struct __env_thread_info {
+	u_int32_t	thr_count;
+	u_int32_t	thr_max;
+	u_int32_t	thr_nbucket;
+	roff_t		thr_hashoff;
+} THREAD_INFO;
+
+#define	DB_EVENT(env, e, einfo) do {					\
+	DB_ENV *__dbenv = (env)->dbenv;					\
+	if (__dbenv->db_event_func != NULL)				\
+		__dbenv->db_event_func(__dbenv, e, einfo);		\
+} while (0)
+
+typedef struct __flag_map {
+	u_int32_t inflag, outflag;
+} FLAG_MAP;
+
+/*
+ * Internal database environment structure.
+ *
+ * This is the private database environment handle.  The public environment
+ * handle is the DB_ENV structure.   The library owns this structure, the user
+ * owns the DB_ENV structure.  The reason there are two structures is because
+ * the user's configuration outlives any particular DB_ENV->open call, and
+ * separate structures allows us to easily discard internal information without
+ * discarding the user's configuration.
+ */
+struct __env {
+	DB_ENV *dbenv;			/* Linked DB_ENV structure */
+
+	/*
+	 * The ENV structure can be used concurrently, so field access is
+	 * protected.
+	 */
+	db_mutex_t mtx_env;		/* ENV structure mutex */
+
+	/*
+	 * Some fields are included in the ENV structure rather than in the
+	 * DB_ENV structure because they are only set as arguments to the
+	 * DB_ENV->open method.  In other words, because of the historic API,
+	 * not for any rational reason.
+	 *
+	 * Arguments to DB_ENV->open.
+	 */
+	char	 *db_home;		/* Database home */
+	u_int32_t open_flags;		/* Flags */
+	int	  db_mode;		/* Default open permissions */
+
+	pid_t	pid_cache;		/* Cached process ID */
+
+	DB_FH	*lockfhp;		/* fcntl(2) locking file handle */
+
+	DB_LOCKER *env_lref;		/* Locker in non-threaded handles */
+
+	DB_DISTAB   recover_dtab;	/* Dispatch table for recover funcs */
+
+	int dir_mode;			/* Intermediate directory perms. */
+
+	/* Thread tracking */
+	u_int32_t	 thr_nbucket;	/* Number of hash buckets */
+	DB_HASHTAB	*thr_hashtab;	/* Hash table of DB_THREAD_INFO */
+
+	/* Mutex allocation */
+	struct {
+		int	  alloc_id;	/* Allocation ID argument */
+		u_int32_t flags;	/* Flags argument */
+	} *mutex_iq;			/* Initial mutexes queue */
+	u_int		mutex_iq_next;	/* Count of initial mutexes */
+	u_int		mutex_iq_max;	/* Maximum initial mutexes */
+
+	/*
+	 * List of open DB handles for this ENV, used for cursor
+	 * adjustment.  Must be protected for multi-threaded support.
+	 */
+	db_mutex_t mtx_dblist;
+	int	   db_ref;		/* DB handle reference count */
+	TAILQ_HEAD(__dblist, __db) dblist;
+
+	/*
+	 * XA support.
+	 */
+	int		 xa_rmid;		/* XA Resource Manager ID */
+	TAILQ_ENTRY(__env) links;		/* XA environments */
+	TAILQ_HEAD(__xa_txn, __db_txn) xa_txn;	/* XA active transactions */
+
+	/*
+	 * List of open file handles for this ENV.  Must be protected
+	 * for multi-threaded support.
+	 */
+	TAILQ_HEAD(__fdlist, __fh_t) fdlist;
+
+	db_mutex_t	 mtx_mt;	/* Mersenne Twister mutex */
+	int		 mti;		/* Mersenne Twister index */
+	u_long		*mt;		/* Mersenne Twister state vector */
+
+	DB_CIPHER	*crypto_handle;	/* Crypto handle */
+	DB_LOCKTAB	*lk_handle;	/* Lock handle */
+	DB_LOG		*lg_handle;	/* Log handle */
+	DB_MPOOL	*mp_handle;	/* Mpool handle */
+	DB_MUTEXMGR	*mutex_handle;	/* Mutex handle */
+	DB_REP		*rep_handle;	/* Replication handle */
+	DB_TXNMGR	*tx_handle;	/* Txn handle */
+
+	/* Application callback to copy data to/from a custom data source */
+#define	DB_USERCOPY_GETDATA	0x0001
+#define	DB_USERCOPY_SETDATA	0x0002
+	int (*dbt_usercopy)
+	    __P((DBT *, u_int32_t, void *, u_int32_t, u_int32_t));
+
+	REGINFO	*reginfo;		/* REGINFO structure reference */
+
+#define	DB_TEST_ELECTINIT	 1	/* after __rep_elect_init */
+#define	DB_TEST_ELECTVOTE1	 2	/* after sending VOTE1 */
+#define	DB_TEST_POSTDESTROY	 3	/* after destroy op */
+#define	DB_TEST_POSTLOG		 4	/* after logging all pages */
+#define	DB_TEST_POSTLOGMETA	 5	/* after logging meta in btree */
+#define	DB_TEST_POSTOPEN	 6	/* after __os_open */
+#define	DB_TEST_POSTSYNC	 7	/* after syncing the log */
+#define	DB_TEST_PREDESTROY	 8	/* before destroy op */
+#define	DB_TEST_PREOPEN		 9	/* before __os_open */
+#define	DB_TEST_SUBDB_LOCKS	 10	/* subdb locking tests */
+	int	test_abort;		/* Abort value for testing */
+	int	test_check;		/* Checkpoint value for testing */
+	int	test_copy;		/* Copy value for testing */
+
+#define	ENV_CDB			0x00000001 /* DB_INIT_CDB */
+#define	ENV_DBLOCAL		0x00000002 /* Environment for a private DB */
+#define	ENV_LITTLEENDIAN	0x00000004 /* Little endian system. */
+#define	ENV_LOCKDOWN		0x00000008 /* DB_LOCKDOWN set */
+#define	ENV_NO_OUTPUT_SET	0x00000010 /* No output channel set */
+#define	ENV_OPEN_CALLED		0x00000020 /* DB_ENV->open called */
+#define	ENV_PRIVATE		0x00000040 /* DB_PRIVATE set */
+#define	ENV_RECOVER_FATAL	0x00000080 /* Doing fatal recovery in env */
+#define	ENV_REF_COUNTED		0x00000100 /* Region references this handle */
+#define	ENV_SYSTEM_MEM		0x00000200 /* DB_SYSTEM_MEM set */
+#define	ENV_THREAD		0x00000400 /* DB_THREAD set */
+	u_int32_t flags;
+};
+
+/*******************************************************
+ * Database Access Methods.
+ *******************************************************/
+/*
+ * DB_IS_THREADED --
+ *	The database handle is free-threaded (was opened with DB_THREAD).
+ */
+#define	DB_IS_THREADED(dbp)						\
+	((dbp)->mutex != MUTEX_INVALID)
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	DB_ILLEGAL_AFTER_OPEN(dbp, name)				\
+	if (F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 1));
+#define	DB_ILLEGAL_BEFORE_OPEN(dbp, name)				\
+	if (!F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 0));
+/* Some initialization methods are illegal if environment isn't local. */
+#define	DB_ILLEGAL_IN_ENV(dbp, name)					\
+	if (!F_ISSET((dbp)->env, ENV_DBLOCAL))				\
+		return (__db_mi_env((dbp)->env, name));
+#define	DB_ILLEGAL_METHOD(dbp, flags) {					\
+	int __ret;							\
+	if ((__ret = __dbh_am_chk(dbp, flags)) != 0)			\
+		return (__ret);						\
+}
+
+/*
+ * Common DBC->internal fields.  Each access method adds additional fields
+ * to this list, but the initial fields are common.
+ */
+#define	__DBC_INTERNAL							\
+	DBC	 *opd;			/* Off-page duplicate cursor. */\
+									\
+	void	 *page;			/* Referenced page. */		\
+	db_pgno_t root;			/* Tree root. */		\
+	db_pgno_t pgno;			/* Referenced page number. */	\
+	db_indx_t indx;			/* Referenced key item index. */\
+									\
+	DB_LOCK		lock;		/* Cursor lock. */		\
+	db_lockmode_t	lock_mode;	/* Lock mode. */
+
+struct __dbc_internal {
+	__DBC_INTERNAL
+};
+
+/* Actions that __db_master_update can take. */
+typedef enum { MU_REMOVE, MU_RENAME, MU_OPEN } mu_action;
+
+/*
+ * Access-method-common macro for determining whether a cursor
+ * has been initialized.
+ */
+#define	IS_INITIALIZED(dbc)	((dbc)->internal->pgno != PGNO_INVALID)
+
+/* Free the callback-allocated buffer, if necessary, hanging off of a DBT. */
+#define	FREE_IF_NEEDED(env, dbt)					\
+	if (F_ISSET((dbt), DB_DBT_APPMALLOC)) {				\
+		__os_ufree((env), (dbt)->data);				\
+		F_CLR((dbt), DB_DBT_APPMALLOC);				\
+	}
+
+/*
+ * Use memory belonging to object "owner" to return the results of
+ * any no-DBT-flag get ops on cursor "dbc".
+ */
+#define	SET_RET_MEM(dbc, owner)				\
+	do {						\
+		(dbc)->rskey = &(owner)->my_rskey;	\
+		(dbc)->rkey = &(owner)->my_rkey;	\
+		(dbc)->rdata = &(owner)->my_rdata;	\
+	} while (0)
+
+/* Use the return-data memory src is currently set to use in dest as well. */
+#define	COPY_RET_MEM(src, dest)				\
+	do {						\
+		(dest)->rskey = (src)->rskey;		\
+		(dest)->rkey = (src)->rkey;		\
+		(dest)->rdata = (src)->rdata;		\
+	} while (0)
+
+/* Reset the returned-memory pointers to their defaults. */
+#define	RESET_RET_MEM(dbc)				\
+	do {						\
+		(dbc)->rskey = &(dbc)->my_rskey;	\
+		(dbc)->rkey = &(dbc)->my_rkey;		\
+		(dbc)->rdata = &(dbc)->my_rdata;	\
+	} while (0)
+
+/*******************************************************
+ * Mpool.
+ *******************************************************/
+/*
+ * File types for DB access methods.  Negative numbers are reserved to DB.
+ */
+#define	DB_FTYPE_SET		-1		/* Call pgin/pgout functions. */
+#define	DB_FTYPE_NOTSET		 0		/* Don't call... */
+#define	DB_LSN_OFF_NOTSET	-1		/* Not yet set. */
+#define	DB_CLEARLEN_NOTSET	UINT32_MAX	/* Not yet set. */
+
+/* Structure used as the DB pgin/pgout pgcookie. */
+typedef struct __dbpginfo {
+	size_t	db_pagesize;		/* Underlying page size. */
+	u_int32_t flags;		/* Some DB_AM flags needed. */
+	DBTYPE  type;			/* DB type */
+} DB_PGINFO;
+
+/*******************************************************
+ * Log.
+ *******************************************************/
+/* Initialize an LSN to 'zero'. */
+#define	ZERO_LSN(LSN) do {						\
+	(LSN).file = 0;							\
+	(LSN).offset = 0;						\
+} while (0)
+#define	IS_ZERO_LSN(LSN)	((LSN).file == 0 && (LSN).offset == 0)
+
+#define	IS_INIT_LSN(LSN)	((LSN).file == 1 && (LSN).offset == 0)
+#define	INIT_LSN(LSN)		do {					\
+	(LSN).file = 1;							\
+	(LSN).offset = 0;						\
+} while (0)
+
+#define	MAX_LSN(LSN) do {						\
+	(LSN).file = UINT32_MAX;					\
+	(LSN).offset = UINT32_MAX;					\
+} while (0)
+#define	IS_MAX_LSN(LSN) \
+	((LSN).file == UINT32_MAX && (LSN).offset == UINT32_MAX)
+
+/* If logging is turned off, smash the lsn. */
+#define	LSN_NOT_LOGGED(LSN) do {					\
+	(LSN).file = 0;							\
+	(LSN).offset = 1;						\
+} while (0)
+#define	IS_NOT_LOGGED_LSN(LSN) \
+	((LSN).file == 0 && (LSN).offset == 1)
+
+/*
+ * LOG_COMPARE -- compare two LSNs.
+ */
+
+#define	LOG_COMPARE(lsn0, lsn1)						\
+    ((lsn0)->file != (lsn1)->file ?					\
+    ((lsn0)->file < (lsn1)->file ? -1 : 1) :				\
+    ((lsn0)->offset != (lsn1)->offset ?					\
+    ((lsn0)->offset < (lsn1)->offset ? -1 : 1) : 0))
+
+/*******************************************************
+ * Txn.
+ *******************************************************/
+#define	DB_NONBLOCK(C)	((C)->txn != NULL && F_ISSET((C)->txn, TXN_NOWAIT))
+#define	NOWAIT_FLAG(txn) \
+	((txn) != NULL && F_ISSET((txn), TXN_NOWAIT) ? DB_LOCK_NOWAIT : 0)
+#define	IS_REAL_TXN(txn)						\
+	((txn) != NULL && !F_ISSET(txn, TXN_CDSGROUP))
+#define	IS_SUBTRANSACTION(txn)						\
+	((txn) != NULL && (txn)->parent != NULL)
+
+/*******************************************************
+ * Crypto.
+ *******************************************************/
+#define	DB_IV_BYTES     16		/* Bytes per IV */
+#define	DB_MAC_KEY	20		/* Bytes per MAC checksum */
+
+/*******************************************************
+ * Secondaries over RPC.
+ *******************************************************/
+#ifdef CONFIG_TEST
+/*
+ * These are flags passed to DB->associate calls by the Tcl API if running
+ * over RPC.  The RPC server will mask out these flags before making the real
+ * DB->associate call.
+ *
+ * These flags must coexist with the valid flags to DB->associate (currently
+ * DB_AUTO_COMMIT and DB_CREATE).  DB_AUTO_COMMIT is in the group of
+ * high-order shared flags (0xff000000), and DB_CREATE is in the low-order
+ * group (0x00000fff), so we pick a range in between.
+ */
+#define	DB_RPC2ND_MASK		0x00f00000 /* Reserved bits. */
+
+#define	DB_RPC2ND_REVERSEDATA	0x00100000 /* callback_n(0) _s_reversedata. */
+#define	DB_RPC2ND_NOOP		0x00200000 /* callback_n(1) _s_noop */
+#define	DB_RPC2ND_CONCATKEYDATA	0x00300000 /* callback_n(2) _s_concatkeydata */
+#define	DB_RPC2ND_CONCATDATAKEY 0x00400000 /* callback_n(3) _s_concatdatakey */
+#define	DB_RPC2ND_REVERSECONCAT	0x00500000 /* callback_n(4) _s_reverseconcat */
+#define	DB_RPC2ND_TRUNCDATA	0x00600000 /* callback_n(5) _s_truncdata */
+#define	DB_RPC2ND_CONSTANT	0x00700000 /* callback_n(6) _s_constant */
+#define	DB_RPC2ND_GETZIP	0x00800000 /* sj_getzip */
+#define	DB_RPC2ND_GETNAME	0x00900000 /* sj_getname */
+#endif
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*******************************************************
+ * Remaining general DB includes.
+ *******************************************************/
+
+
+#include "dbinc/globals.h"
+#include "dbinc/clock.h"
+#include "dbinc/debug.h"
+#include "dbinc/region.h"
+#include "dbinc_auto/env_ext.h"
+#include "dbinc/mutex.h"
+#ifdef HAVE_REPLICATION_THREADS
+#include "dbinc/repmgr.h"
+#endif
+#include "dbinc/rep.h"
+#include "dbinc/os.h"
+#include "dbinc_auto/clib_ext.h"
+#include "dbinc_auto/common_ext.h"
+
+/*******************************************************
+ * Remaining Log.
+ * These need to be defined after the general includes
+ * because they need rep.h from above.
+ *******************************************************/
+/*
+ * Test if the environment is currently logging changes.  If we're in recovery
+ * or we're a replication client, we don't need to log changes because they're
+ * already in the log, even though we have a fully functional log system.
+ */
+#define	DBENV_LOGGING(env)						\
+	(LOGGING_ON(env) && !IS_REP_CLIENT(env) && (!IS_RECOVERING(env)))
+
+/*
+ * Test if we need to log a change.  By default, we don't log operations without
+ * associated transactions, unless DIAGNOSTIC, DEBUG_ROP or DEBUG_WOP are on.
+ * This is because we want to get log records for read/write operations, and, if
+ * we are trying to debug something, more information is always better.
+ *
+ * The DBC_RECOVER flag is set when we're in abort, as well as during recovery;
+ * thus DBC_LOGGING may be false for a particular dbc even when DBENV_LOGGING
+ * is true.
+ *
+ * We explicitly use LOGGING_ON/IS_REP_CLIENT here because we don't want to pull
+ * in the log headers, which IS_RECOVERING (and thus DBENV_LOGGING) rely on, and
+ * because DBC_RECOVER should be set anytime IS_RECOVERING would be true.
+ *
+ * If we're not in recovery (master - doing an abort or a client applying
+ * a txn), then a client's only path through here is on an internal
+ * operation, and a master's only path through here is a transactional
+ * operation.  Detect if either is not the case.
+ */
+#if defined(DIAGNOSTIC) || defined(DEBUG_ROP)  || defined(DEBUG_WOP)
+#define	DBC_LOGGING(dbc)	__dbc_logging(dbc)
+#else
+#define	DBC_LOGGING(dbc)						\
+	((dbc)->txn != NULL && LOGGING_ON((dbc)->env) &&		\
+	    !F_ISSET((dbc), DBC_RECOVER) && !IS_REP_CLIENT((dbc)->env))
+#endif
+
+#endif /* !_DB_INT_H_ */

build_brew/errno.h

@@ -0,0 +1,188 @@
+/*-
+ * Copyright (c) 1982, 1986, 1989, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ * (c) UNIX System Laboratories, Inc.
+ * All or some portions of this file are derived from material licensed
+ * to the University of California by American Telephone and Telegraph
+ * Co. or Unix System Laboratories, Inc. and are reproduced herein with
+ * the permission of UNIX System Laboratories, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)errno.h	8.5 (Berkeley) 1/21/94
+ * FreeBSD: /repoman/r/ncvs/src/sys/sys/errno.h,v 1.28 2005/04/02 12:33:28 das Exp $
+ *
+ * $Id: errno.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#ifndef _SYS_ERRNO_H_
+#define _SYS_ERRNO_H_
+
+#undef	errno
+#define	errno	DB_GLOBAL(db_errno)
+
+#define	EPERM		1		/* Operation not permitted */
+#define	ENOENT		2		/* No such file or directory */
+#define	ESRCH		3		/* No such process */
+#define	EINTR		4		/* Interrupted system call */
+#define	EIO		5		/* Input/output error */
+#define	ENXIO		6		/* Device not configured */
+#define	E2BIG		7		/* Argument list too long */
+#define	ENOEXEC		8		/* Exec format error */
+#define	EBADF		9		/* Bad file descriptor */
+#define	ECHILD		10		/* No child processes */
+#define	EDEADLK		11		/* Resource deadlock avoided */
+					/* 11 was EAGAIN */
+#define	ENOMEM		12		/* Cannot allocate memory */
+#define	EACCES		13		/* Permission denied */
+#define	EFAULT		14		/* Bad address */
+#ifndef _POSIX_SOURCE
+#define	ENOTBLK		15		/* Block device required */
+#endif
+#define	EBUSY		16		/* Device busy */
+#define	EEXIST		17		/* File exists */
+#define	EXDEV		18		/* Cross-device link */
+#define	ENODEV		19		/* Operation not supported by device */
+#define	ENOTDIR		20		/* Not a directory */
+#define	EISDIR		21		/* Is a directory */
+#define	EINVAL		22		/* Invalid argument */
+#define	ENFILE		23		/* Too many open files in system */
+#define	EMFILE		24		/* Too many open files */
+#define	ENOTTY		25		/* Inappropriate ioctl for device */
+#ifndef _POSIX_SOURCE
+#define	ETXTBSY		26		/* Text file busy */
+#endif
+#define	EFBIG		27		/* File too large */
+#define	ENOSPC		28		/* No space left on device */
+#define	ESPIPE		29		/* Illegal seek */
+#define	EROFS		30		/* Read-only filesystem */
+#define	EMLINK		31		/* Too many links */
+#define	EPIPE		32		/* Broken pipe */
+
+/* math software */
+#define	EDOM		33		/* Numerical argument out of domain */
+#define	ERANGE		34		/* Result too large */
+
+/* non-blocking and interrupt i/o */
+#define	EAGAIN		35		/* Resource temporarily unavailable */
+#ifndef _POSIX_SOURCE
+#define	EWOULDBLOCK	EAGAIN		/* Operation would block */
+#define	EINPROGRESS	36		/* Operation now in progress */
+
+#ifndef EALREADY			/* BREW already has an EALREADY. */
+#define	EALREADY	37		/* Operation already in progress */
+#endif
+
+/* ipc/network software -- argument errors */
+#define	ENOTSOCK	38		/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39		/* Destination address required */
+#define	EMSGSIZE	40		/* Message too long */
+#define	EPROTOTYPE	41		/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42		/* Protocol not available */
+#define	EPROTONOSUPPORT	43		/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44		/* Socket type not supported */
+#define	EOPNOTSUPP	45		/* Operation not supported */
+#define	ENOTSUP		EOPNOTSUPP	/* Operation not supported */
+#define	EPFNOSUPPORT	46		/* Protocol family not supported */
+#define	EAFNOSUPPORT	47		/* Address family not supported by protocol family */
+#define	EADDRINUSE	48		/* Address already in use */
+#define	EADDRNOTAVAIL	49		/* Can't assign requested address */
+
+/* ipc/network software -- operational errors */
+#define	ENETDOWN	50		/* Network is down */
+#define	ENETUNREACH	51		/* Network is unreachable */
+#define	ENETRESET	52		/* Network dropped connection on reset */
+#define	ECONNABORTED	53		/* Software caused connection abort */
+#define	ECONNRESET	54		/* Connection reset by peer */
+#define	ENOBUFS		55		/* No buffer space available */
+#define	EISCONN		56		/* Socket is already connected */
+#define	ENOTCONN	57		/* Socket is not connected */
+#define	ESHUTDOWN	58		/* Can't send after socket shutdown */
+#define	ETOOMANYREFS	59		/* Too many references: can't splice */
+#define	ETIMEDOUT	60		/* Operation timed out */
+#define	ECONNREFUSED	61		/* Connection refused */
+
+#define	ELOOP		62		/* Too many levels of symbolic links */
+#endif /* _POSIX_SOURCE */
+#define	ENAMETOOLONG	63		/* File name too long */
+
+/* should be rearranged */
+#ifndef _POSIX_SOURCE
+#define	EHOSTDOWN	64		/* Host is down */
+#define	EHOSTUNREACH	65		/* No route to host */
+#endif /* _POSIX_SOURCE */
+#define	ENOTEMPTY	66		/* Directory not empty */
+
+/* quotas & mush */
+#ifndef _POSIX_SOURCE
+#define	EPROCLIM	67		/* Too many processes */
+#define	EUSERS		68		/* Too many users */
+#define	EDQUOT		69		/* Disc quota exceeded */
+
+/* Network File System */
+#define	ESTALE		70		/* Stale NFS file handle */
+#define	EREMOTE		71		/* Too many levels of remote in path */
+#define	EBADRPC		72		/* RPC struct is bad */
+#define	ERPCMISMATCH	73		/* RPC version wrong */
+#define	EPROGUNAVAIL	74		/* RPC prog. not avail */
+#define	EPROGMISMATCH	75		/* Program version wrong */
+#define	EPROCUNAVAIL	76		/* Bad procedure for program */
+#endif /* _POSIX_SOURCE */
+
+#define	ENOLCK		77		/* No locks available */
+#define	ENOSYS		78		/* Function not implemented */
+
+#ifndef _POSIX_SOURCE
+#define	EFTYPE		79		/* Inappropriate file type or format */
+#define	EAUTH		80		/* Authentication error */
+#define	ENEEDAUTH	81		/* Need authenticator */
+#define	EIDRM		82		/* Identifier removed */
+#define	ENOMSG		83		/* No message of desired type */
+#define	EOVERFLOW	84		/* Value too large to be stored in data type */
+#define	ECANCELED	85		/* Operation canceled */
+#define	EILSEQ		86		/* Illegal byte sequence */
+#define	ENOATTR		87		/* Attribute not found */
+
+#define EDOOFUS		88		/* Programming error */
+#endif /* _POSIX_SOURCE */
+
+#define	EBADMSG		89		/* Bad message */
+#define	EMULTIHOP	90		/* Multihop attempted */
+#define	ENOLINK		91		/* Link has been severed */
+#define	EPROTO		92		/* Protocol error */
+
+#ifndef _POSIX_SOURCE
+#define	ELAST		92		/* Must be equal largest errno */
+#endif /* _POSIX_SOURCE */
+
+#ifdef _KERNEL
+/* pseudo-errors returned inside kernel to modify return to process */
+#define	ERESTART	(-1)		/* restart syscall */
+#define	EJUSTRETURN	(-2)		/* don't modify regs, just return */
+#define	ENOIOCTL	(-3)		/* ioctl not handled by this layer */
+#define	EDIRIOCTL	(-4)		/* do direct ioctl in GEOM */
+#endif
+
+#endif

build_s60/bdb_s60.mmp

@@ -0,0 +1,183 @@
+// bdb_s60.mmp
+// DO NOT EDIT: automatically built by dist/s_s60_mmp
+
+TARGET		bdb_s60.lib
+TARGETTYPE	lib
+UID		0x10004262 0xE8000016
+VENDORID	0x70000002
+
+SOURCE		..\btree\bt_compact.c
+SOURCE		..\btree\bt_compare.c
+SOURCE		..\btree\bt_conv.c
+SOURCE		..\btree\bt_curadj.c
+SOURCE		..\btree\bt_cursor.c
+SOURCE		..\btree\bt_delete.c
+SOURCE		..\btree\bt_method.c
+SOURCE		..\btree\bt_open.c
+SOURCE		..\btree\bt_put.c
+SOURCE		..\btree\bt_rec.c
+SOURCE		..\btree\bt_reclaim.c
+SOURCE		..\btree\bt_recno.c
+SOURCE		..\btree\bt_rsearch.c
+SOURCE		..\btree\bt_search.c
+SOURCE		..\btree\bt_split.c
+SOURCE		..\btree\bt_stat.c
+SOURCE		..\btree\btree_auto.c
+SOURCE		..\clib\snprintf.c
+SOURCE		..\clib\strcasecmp.c
+SOURCE		..\clib\strsep.c
+SOURCE		..\common\crypto_stub.c
+SOURCE		..\common\db_byteorder.c
+SOURCE		..\common\db_err.c
+SOURCE		..\common\db_getlong.c
+SOURCE		..\common\db_idspace.c
+SOURCE		..\common\db_log2.c
+SOURCE		..\common\db_shash.c
+SOURCE		..\common\dbt.c
+SOURCE		..\common\mkpath.c
+SOURCE		..\common\zerofill.c
+SOURCE		..\db\crdel_auto.c
+SOURCE		..\db\crdel_rec.c
+SOURCE		..\db\db.c
+SOURCE		..\db\db_am.c
+SOURCE		..\db\db_auto.c
+SOURCE		..\db\db_cam.c
+SOURCE		..\db\db_cds.c
+SOURCE		..\db\db_conv.c
+SOURCE		..\db\db_dispatch.c
+SOURCE		..\db\db_dup.c
+SOURCE		..\db\db_iface.c
+SOURCE		..\db\db_join.c
+SOURCE		..\db\db_meta.c
+SOURCE		..\db\db_method.c
+SOURCE		..\db\db_open.c
+SOURCE		..\db\db_overflow.c
+SOURCE		..\db\db_pr.c
+SOURCE		..\db\db_rec.c
+SOURCE		..\db\db_reclaim.c
+SOURCE		..\db\db_remove.c
+SOURCE		..\db\db_rename.c
+SOURCE		..\db\db_ret.c
+SOURCE		..\db\db_setid.c
+SOURCE		..\db\db_setlsn.c
+SOURCE		..\db\db_stati.c
+SOURCE		..\db\db_truncate.c
+SOURCE		..\db\db_upg.c
+SOURCE		..\db\db_vrfy_stub.c
+SOURCE		..\dbreg\dbreg.c
+SOURCE		..\dbreg\dbreg_auto.c
+SOURCE		..\dbreg\dbreg_rec.c
+SOURCE		..\dbreg\dbreg_stat.c
+SOURCE		..\dbreg\dbreg_util.c
+SOURCE		..\env\env_alloc.c
+SOURCE		..\env\env_config.c
+SOURCE		..\env\env_failchk.c
+SOURCE		..\env\env_file.c
+SOURCE		..\env\env_globals.c
+SOURCE		..\env\env_method.c
+SOURCE		..\env\env_name.c
+SOURCE		..\env\env_open.c
+SOURCE		..\env\env_recover.c
+SOURCE		..\env\env_region.c
+SOURCE		..\env\env_register.c
+SOURCE		..\env\env_sig.c
+SOURCE		..\env\env_stat.c
+SOURCE		..\fileops\fileops_auto.c
+SOURCE		..\fileops\fop_basic.c
+SOURCE		..\fileops\fop_rec.c
+SOURCE		..\fileops\fop_util.c
+SOURCE		..\hash\hash_func.c
+SOURCE		..\hash\hash_stub.c
+SOURCE		..\hmac\hmac.c
+SOURCE		..\hmac\sha1.c
+SOURCE		..\lock\lock.c
+SOURCE		..\lock\lock_deadlock.c
+SOURCE		..\lock\lock_failchk.c
+SOURCE		..\lock\lock_id.c
+SOURCE		..\lock\lock_list.c
+SOURCE		..\lock\lock_method.c
+SOURCE		..\lock\lock_region.c
+SOURCE		..\lock\lock_stat.c
+SOURCE		..\lock\lock_timer.c
+SOURCE		..\lock\lock_util.c
+SOURCE		..\log\log.c
+SOURCE		..\log\log_archive.c
+SOURCE		..\log\log_compare.c
+SOURCE		..\log\log_debug.c
+SOURCE		..\log\log_get.c
+SOURCE		..\log\log_method.c
+SOURCE		..\log\log_put.c
+SOURCE		..\log\log_stat.c
+SOURCE		..\mp\mp_alloc.c
+SOURCE		..\mp\mp_bh.c
+SOURCE		..\mp\mp_fget.c
+SOURCE		..\mp\mp_fmethod.c
+SOURCE		..\mp\mp_fopen.c
+SOURCE		..\mp\mp_fput.c
+SOURCE		..\mp\mp_fset.c
+SOURCE		..\mp\mp_method.c
+SOURCE		..\mp\mp_mvcc.c
+SOURCE		..\mp\mp_region.c
+SOURCE		..\mp\mp_register.c
+SOURCE		..\mp\mp_resize.c
+SOURCE		..\mp\mp_stat.c
+SOURCE		..\mp\mp_sync.c
+SOURCE		..\mp\mp_trickle.c
+SOURCE		..\mutex\mut_alloc.c
+SOURCE		..\mutex\mut_failchk.c
+SOURCE		..\mutex\mut_method.c
+SOURCE		..\mutex\mut_pthread.c
+SOURCE		..\mutex\mut_region.c
+SOURCE		..\mutex\mut_stat.c
+SOURCE		..\os\os_abort.c
+SOURCE		..\os\os_abs.c
+SOURCE		..\os\os_alloc.c
+SOURCE		..\os\os_clock.c
+SOURCE		..\os\os_cpu.c
+SOURCE		..\os\os_ctime.c
+SOURCE		..\os\os_dir.c
+SOURCE		..\os\os_errno.c
+SOURCE		..\os\os_fid.c
+SOURCE		..\os\os_flock.c
+SOURCE		..\os\os_fsync.c
+SOURCE		..\os\os_getenv.c
+SOURCE		..\os\os_handle.c
+SOURCE		..\os\os_map.c
+SOURCE		..\os\os_mkdir.c
+SOURCE		..\os\os_open.c
+SOURCE		..\os\os_pid.c
+SOURCE		..\os\os_rename.c
+SOURCE		..\os\os_root.c
+SOURCE		..\os\os_rpath.c
+SOURCE		..\os\os_rw.c
+SOURCE		..\os\os_seek.c
+SOURCE		..\os\os_stack.c
+SOURCE		..\os\os_stat.c
+SOURCE		..\os\os_tmpdir.c
+SOURCE		..\os\os_truncate.c
+SOURCE		..\os\os_uid.c
+SOURCE		..\os\os_unlink.c
+SOURCE		..\os\os_yield.c
+SOURCE		..\os_s60\os_config.c
+SOURCE		..\qam\qam_stub.c
+SOURCE		..\rep\rep_stub.c
+SOURCE		..\repmgr\repmgr_stub.c
+SOURCE		..\txn\txn.c
+SOURCE		..\txn\txn_auto.c
+SOURCE		..\txn\txn_chkpt.c
+SOURCE		..\txn\txn_failchk.c
+SOURCE		..\txn\txn_method.c
+SOURCE		..\txn\txn_rec.c
+SOURCE		..\txn\txn_recover.c
+SOURCE		..\txn\txn_region.c
+SOURCE		..\txn\txn_stat.c
+SOURCE		..\txn\txn_util.c
+SOURCE		..\xa\xa_stub.c
+
+SYSTEMINCLUDE	\epoc32\include\stdapis \epoc32\include
+USERINCLUDE	.
+USERINCLUDE	..
+
+LIBRARY		libc.lib libpthread.lib euser.lib libcrt0.lib
+
+nostrictdef

build_s60/clib_port.h

@@ -0,0 +1,274 @@
+/* DO NOT EDIT: automatically built from dist/clib_port.in. */
+/*
+ * Minimum/maximum values for various types.
+ */
+#ifndef	UINT16_MAX			/* Maximum 16-bit unsigned. */
+#define	UINT16_MAX	65535
+#endif
+#ifndef	UINT32_MAX			/* Maximum 32-bit unsigned. */
+#define	UINT32_MAX	4294967295U
+#endif
+
+#ifndef	INT_MAX
+#if SIZEOF_INT == 4
+#define	INT_MAX		2147483647
+#endif
+#if SIZEOF_INT == 8
+#define	INT_MAX		9223372036854775807
+#endif
+#endif
+
+#ifndef	INT_MIN				/* minimum (signed) int value */
+#define	INT_MIN		(-INT_MAX-1)
+#endif
+
+#ifndef	UINT_MAX			/* maximum (signed) int value */
+#if SIZEOF_INT == 4
+#define	UINT_MAX	4294967295U
+#endif
+#if SIZEOF_INT == 8
+#define	UINT_MAX	18446744073709551615U
+#endif
+#endif
+
+#ifndef	LONG_MAX			/* maximum (signed) long value */
+#if SIZEOF_LONG == 4
+#define	LONG_MAX	2147483647
+#endif
+#if SIZEOF_LONG == 8
+#define	LONG_MAX	9223372036854775807L
+#endif
+#endif
+
+#ifndef	LONG_MIN			/* minimum (signed) long value */
+#define	LONG_MIN	(-LONG_MAX-1)
+#endif
+
+#ifndef	ULONG_MAX			/* maximum (unsigned) long value */
+#if SIZEOF_LONG == 4
+#define	ULONG_MAX	4294967295U
+#endif
+#if SIZEOF_LONG == 8
+#define	ULONG_MAX	18446744073709551615UL
+#endif
+#endif
+
+#if defined(HAVE_64BIT_TYPES)
+/*
+ * Override the system's 64-bit min/max constants.  AIX's 32-bit compiler can
+ * handle 64-bit values, but the system's constants don't include the LL/ULL
+ * suffix, and so can't be compiled using the 32-bit compiler.
+ */
+#undef	INT64_MAX
+#undef	INT64_MIN
+#undef	UINT64_MAX
+
+#ifdef	DB_WIN32
+#define	INT64_MAX	_I64_MAX
+#define	INT64_MIN	_I64_MIN
+#define	UINT64_MAX	_UI64_MAX
+#else
+#define	INT64_MAX	9223372036854775807LL
+#define	INT64_MIN	(-INT64_MAX-1)
+#define	UINT64_MAX	18446744073709551615ULL
+#endif	/* DB_WIN32 */
+
+#endif	/* HAVE_64BIT_TYPES */
+
+/*
+ * Exit success/failure macros.
+ */
+#ifndef	HAVE_EXIT_SUCCESS
+#define	EXIT_FAILURE	1
+#define	EXIT_SUCCESS	0
+#endif
+
+/*
+ * File modes.
+ */
+#ifdef DB_WIN32
+#ifndef S_IREAD				/* WinCE doesn't have S_IREAD. */
+#define	S_IREAD		0
+#endif
+#ifndef S_IWRITE			/* WinCE doesn't have S_IWRITE. */
+#define	S_IWRITE	0
+#endif
+#ifndef	S_IRUSR
+#define	S_IRUSR		S_IREAD		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		S_IWRITE	/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0		/* X for other */
+#endif
+#else /* !DB_WIN32 */
+#ifndef	S_IRUSR
+#define	S_IRUSR		0000400		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		0000200		/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0000100		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0000040		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0000020		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0000010		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0000004		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0000002		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0000001		/* X for other */
+#endif
+#endif /* !DB_WIN32 */
+
+/*
+ * Don't step on the namespace.  Other libraries may have their own
+ * implementations of these functions, we don't want to use their
+ * implementations or force them to use ours based on the load order.
+ */
+#ifndef	HAVE_ATOI
+#define	atoi		__db_Catoi
+#endif
+#ifndef	HAVE_ATOL
+#define	atol		__db_Catol
+#endif
+#ifndef	HAVE_FCLOSE
+#define	fclose		__db_Cfclose
+#endif
+#ifndef	HAVE_FGETC
+#define	fgetc		__db_Cfgetc
+#endif
+#ifndef	HAVE_FGETS
+#define	fgets		__db_Cfgets
+#endif
+#ifndef	HAVE_FOPEN
+#define	fopen		__db_Cfopen
+#endif
+#ifndef	HAVE_FWRITE
+#define	fwrite		__db_Cfwrite
+#endif
+#ifndef	HAVE_GETADDRINFO
+#define	freeaddrinfo(a)		__db_Cfreeaddrinfo(a)
+#define	getaddrinfo(a, b, c, d)	__db_Cgetaddrinfo(a, b, c, d)
+#endif
+#ifndef	HAVE_GETCWD
+#define	getcwd		__db_Cgetcwd
+#endif
+#ifndef	HAVE_GETOPT
+#define	getopt		__db_Cgetopt
+#define	optarg		__db_Coptarg
+#define	opterr		__db_Copterr
+#define	optind		__db_Coptind
+#define	optopt		__db_Coptopt
+#define	optreset	__db_Coptreset
+#endif
+#ifndef	HAVE_ISALPHA
+#define	isalpha		__db_Cisalpha
+#endif
+#ifndef	HAVE_ISDIGIT
+#define	isdigit		__db_Cisdigit
+#endif
+#ifndef	HAVE_ISPRINT
+#define	isprint		__db_Cisprint
+#endif
+#ifndef	HAVE_ISSPACE
+#define	isspace		__db_Cisspace
+#endif
+#ifndef	HAVE_LOCALTIME
+#define	localtime	__db_Clocaltime
+#endif
+#ifndef	HAVE_MEMCMP
+#define	memcmp		__db_Cmemcmp
+#endif
+#ifndef	HAVE_MEMCPY
+#define	memcpy		__db_Cmemcpy
+#endif
+#ifndef	HAVE_MEMMOVE
+#define	memmove		__db_Cmemmove
+#endif
+#ifndef	HAVE_PRINTF
+#define	printf		__db_Cprintf
+#define	fprintf		__db_Cfprintf
+#endif
+#ifndef	HAVE_QSORT
+#define	qsort		__db_Cqsort
+#endif
+#ifndef	HAVE_RAISE
+#define	raise		__db_Craise
+#endif
+#ifndef	HAVE_RAND
+#define	rand		__db_Crand
+#define	srand		__db_Csrand
+#endif
+#ifndef	HAVE_SNPRINTF
+#define	snprintf	__db_Csnprintf
+#endif
+#ifndef	HAVE_STRCASECMP
+#define	strcasecmp	__db_Cstrcasecmp
+#define	strncasecmp	__db_Cstrncasecmp
+#endif
+#ifndef	HAVE_STRCAT
+#define	strcat		__db_Cstrcat
+#endif
+#ifndef	HAVE_STRCHR
+#define	strchr		__db_Cstrchr
+#endif
+#ifndef	HAVE_STRDUP
+#define	strdup		__db_Cstrdup
+#endif
+#ifndef	HAVE_STRERROR
+#define	strerror	__db_Cstrerror
+#endif
+#ifndef	HAVE_STRNCAT
+#define	strncat		__db_Cstrncat
+#endif
+#ifndef	HAVE_STRNCMP
+#define	strncmp		__db_Cstrncmp
+#endif
+#ifndef	HAVE_STRRCHR
+#define	strrchr		__db_Cstrrchr
+#endif
+#ifndef	HAVE_STRSEP
+#define	strsep		__db_Cstrsep
+#endif
+#ifndef	HAVE_STRTOL
+#define	strtol		__db_Cstrtol
+#endif
+#ifndef	HAVE_STRTOUL
+#define	strtoul		__db_Cstrtoul
+#endif
+#ifndef	HAVE_TIME
+#define	time		__db_Ctime
+#endif
+#ifndef	HAVE_VSNPRINTF
+#define	vsnprintf	__db_Cvsnprintf
+#endif

build_s60/db_config.h

@@ -0,0 +1,572 @@
+/* DO NOT EDIT: automatically built by dist/s_s60. */
+/* db_config.h.  Generated from config.hin by configure.  */
+/* config.hin.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you want to build a version for running the test suite. */
+/* #undef CONFIG_TEST */
+
+/* We use DB_WIN32 much as one would use _WIN32 -- to specify that we're using
+   an operating system environment that supports Win32 calls and semantics. We
+   don't use _WIN32 because Cygwin/GCC also defines _WIN32, even though
+   Cygwin/GCC closely emulates the Unix environment. */
+/* #undef DB_WIN32 */
+
+/* Define to 1 if you want a debugging version. */
+/* #undef DEBUG */
+
+/* Define to 1 if you want a version that logs read operations. */
+/* #undef DEBUG_ROP */
+
+/* Define to 1 if you want a version that logs write operations. */
+/* #undef DEBUG_WOP */
+
+/* Define to 1 if you want a version with run-time diagnostic checking. */
+/* #undef DIAGNOSTIC */
+
+/* Define to 1 if 64-bit types are available. */
+/* #undef HAVE_64BIT_TYPES */
+
+/* Define to 1 if you have the `abort' function. */
+#define HAVE_ABORT 1
+
+/* Define to 1 if you have the `atoi' function. */
+#define HAVE_ATOI 1
+
+/* Define to 1 if you have the `atol' function. */
+#define HAVE_ATOL 1
+
+/* Define to 1 if you have the `backtrace' function. */
+/* #undef HAVE_BACKTRACE */
+
+/* Define to 1 if you have the `backtrace_symbols' function. */
+/* #undef HAVE_BACKTRACE_SYMBOLS */
+
+/* Define to 1 if building on BREW. */
+/* #undef HAVE_BREW */
+
+/* Define to 1 if building on BREW (SDK2). */
+/* #undef HAVE_BREW_SDK2 */
+
+/* Define to 1 if you have the `clock_gettime' function. */
+/* #undef HAVE_CLOCK_GETTIME */
+
+/* Define to 1 if clock_gettime supports CLOCK_MONOTONIC. */
+/* #undef HAVE_CLOCK_MONOTONIC */
+
+/* Define to 1 if Berkeley DB release includes strong cryptography. */
+/* #undef HAVE_CRYPTO */
+
+/* Define to 1 if you have the `ctime_r' function. */
+#define HAVE_CTIME_R 1
+
+/* Define to 1 if ctime_r takes a buffer length as a third argument. */
+/* #undef HAVE_CTIME_R_3ARG */
+
+/* Define to 1 if you have the `directio' function. */
+/* #undef HAVE_DIRECTIO */
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+/* #undef HAVE_DLFCN_H */
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+/* #undef HAVE_EXECINFO_H */
+
+/* Define to 1 if you have EXIT_SUCCESS/EXIT_FAILURE #defines. */
+#define HAVE_EXIT_SUCCESS 1
+
+/* Define to 1 if you have the `fchmod' function. */
+/* #undef HAVE_FCHMOD */
+
+/* Define to 1 if you have the `fclose' function. */
+#define HAVE_FCLOSE 1
+
+/* Define to 1 if you have the `fcntl' function. */
+#define HAVE_FCNTL 1
+
+/* Define to 1 if fcntl/F_SETFD denies child access to file descriptors. */
+/* #undef HAVE_FCNTL_F_SETFD */
+
+/* Define to 1 if you have the `fdatasync' function. */
+/* #undef HAVE_FDATASYNC */
+
+/* Define to 1 if you have the `fgetc' function. */
+#define HAVE_FGETC 1
+
+/* Define to 1 if you have the `fgets' function. */
+#define HAVE_FGETS 1
+
+/* Define to 1 if allocated filesystem blocks are not zeroed. */
+#define HAVE_FILESYSTEM_NOTZERO 1
+
+/* Define to 1 if you have the `fopen' function. */
+#define HAVE_FOPEN 1
+
+/* Define to 1 if you have the `ftruncate' function. */
+/* #undef HAVE_FTRUNCATE */
+
+/* Define to 1 if you have the `fwrite' function. */
+#define HAVE_FWRITE 1
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+/* #undef HAVE_GETADDRINFO */
+
+/* Define to 1 if you have the `getcwd' function. */
+#define HAVE_GETCWD 1
+
+/* Define to 1 if you have the `getenv' function. */
+/* #undef HAVE_GETENV */
+
+/* Define to 1 if you have the `getgid' function. */
+#define HAVE_GETGID 1
+
+/* Define to 1 if you have the `getopt' function. */
+#define HAVE_GETOPT 1
+
+/* Define to 1 if getopt supports the optreset variable. */
+/* #undef HAVE_GETOPT_OPTRESET */
+
+/* Define to 1 if you have the `getrusage' function. */
+/* #undef HAVE_GETRUSAGE */
+
+/* Define to 1 if you have the `gettimeofday' function. */
+/* #undef HAVE_GETTIMEOFDAY */
+
+/* Define to 1 if you have the `getuid' function. */
+/* #undef HAVE_GETUID */
+
+/* Define to 1 if building Hash access method. */
+/* #undef HAVE_HASH */
+
+/* Define to 1 if you have the `hstrerror' function. */
+/* #undef HAVE_HSTRERROR */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the `isalpha' function. */
+#define HAVE_ISALPHA 1
+
+/* Define to 1 if you have the `isdigit' function. */
+#define HAVE_ISDIGIT 1
+
+/* Define to 1 if you have the `isprint' function. */
+#define HAVE_ISPRINT 1
+
+/* Define to 1 if you have the `isspace' function. */
+#define HAVE_ISSPACE 1
+
+/* Define to 1 if you have the `localtime' function. */
+#define HAVE_LOCALTIME 1
+
+/* Define to 1 if you have the `memcmp' function. */
+#define HAVE_MEMCMP 1
+
+/* Define to 1 if you have the `memcpy' function. */
+#define HAVE_MEMCPY 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+/* #undef HAVE_MEMORY_H */
+
+/* Define to 1 if you have the `mlock' function. */
+/* #undef HAVE_MLOCK */
+
+/* Define to 1 if you have the `mmap' function. */
+/* #undef HAVE_MMAP */
+
+/* Define to 1 if you have the `mprotect' function. */
+/* #undef HAVE_MPROTECT */
+
+/* Define to 1 if you have the `munlock' function. */
+/* #undef HAVE_MUNLOCK */
+
+/* Define to 1 if you have the `munmap' function. */
+#define HAVE_MUNMAP 1
+
+/* Define to 1 to use the GCC compiler and 68K assembly language mutexes. */
+/* #undef HAVE_MUTEX_68K_GCC_ASSEMBLY */
+
+/* Define to 1 to use the AIX _check_lock mutexes. */
+/* #undef HAVE_MUTEX_AIX_CHECK_LOCK */
+
+/* Define to 1 to use the GCC compiler and Alpha assembly language mutexes. */
+/* #undef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and ARM assembly language mutexes. */
+/* #undef HAVE_MUTEX_ARM_GCC_ASSEMBLY */
+
+/* Define to 1 to use the Apple/Darwin _spin_lock_try mutexes. */
+/* #undef HAVE_MUTEX_DARWIN_SPIN_LOCK_TRY */
+
+/* Define to 1 to use the UNIX fcntl system call mutexes. */
+/* #undef HAVE_MUTEX_FCNTL */
+
+/* Define to 1 to use the GCC compiler and PaRisc assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_HPPA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on HP-UX. */
+/* #undef HAVE_MUTEX_HPPA_MSEM_INIT */
+
+/* Define to 1 to use test-and-set mutexes with blocking mutexes. */
+/* #undef HAVE_MUTEX_HYBRID */
+
+/* Define to 1 to use the GCC compiler and IA64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_IA64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and MIPS assembly language mutexes. */
+/* #undef HAVE_MUTEX_MIPS_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on systems other than HP-UX. */
+/* #undef HAVE_MUTEX_MSEM_INIT */
+
+/* Define to 1 to use the GCC compiler and PowerPC assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_PPC_GCC_ASSEMBLY */
+
+/* Define to 1 to use POSIX 1003.1 pthread_XXX mutexes. */
+#define HAVE_MUTEX_PTHREADS 1
+
+/* Define to 1 to use Reliant UNIX initspin mutexes. */
+/* #undef HAVE_MUTEX_RELIANTUNIX_INITSPIN */
+
+/* Define to 1 to use the IBM C compiler and S/390 assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_S390_CC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and S/390 assembly language mutexes. */
+/* #undef HAVE_MUTEX_S390_GCC_ASSEMBLY */
+
+/* Define to 1 to use the SCO compiler and x86 assembly language mutexes. */
+/* #undef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY */
+
+/* Define to 1 to use the obsolete POSIX 1003.1 sema_XXX mutexes. */
+/* #undef HAVE_MUTEX_SEMA_INIT */
+
+/* Define to 1 to use the SGI XXX_lock mutexes. */
+/* #undef HAVE_MUTEX_SGI_INIT_LOCK */
+
+/* Define to 1 to use the Solaris _lock_XXX mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LOCK_TRY */
+
+/* Define to 1 to use the Solaris lwp threads mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LWP */
+
+/* Define to 1 to use the GCC compiler and Sparc assembly language mutexes. */
+/* #undef HAVE_MUTEX_SPARC_GCC_ASSEMBLY */
+
+/* Define to 1 if the Berkeley DB library should support mutexes. */
+#define HAVE_MUTEX_SUPPORT 1
+
+/* Define to 1 if mutexes hold system resources. */
+#define HAVE_MUTEX_SYSTEM_RESOURCES 1
+
+/* Define to 1 to configure mutexes intra-process only. */
+#define HAVE_MUTEX_THREAD_ONLY 1
+
+/* Define to 1 to use the CC compiler and Tru64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_TRU64_CC_ASSEMBLY */
+
+/* Define to 1 to use the UNIX International mutexes. */
+/* #undef HAVE_MUTEX_UI_THREADS */
+
+/* Define to 1 to use the UTS compiler and assembly language mutexes. */
+/* #undef HAVE_MUTEX_UTS_CC_ASSEMBLY */
+
+/* Define to 1 to use VMS mutexes. */
+/* #undef HAVE_MUTEX_VMS */
+
+/* Define to 1 to use VxWorks mutexes. */
+/* #undef HAVE_MUTEX_VXWORKS */
+
+/* Define to 1 to use the MSVC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32 */
+
+/* Define to 1 to use the GCC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32_GCC */
+
+/* Define to 1 to use the GCC compiler and 64-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and 32-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_GCC_ASSEMBLY */
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the O_DIRECT flag. */
+/* #undef HAVE_O_DIRECT */
+
+/* Define to 1 if you have the `pread' function. */
+/* #undef HAVE_PREAD */
+
+/* Define to 1 if you have the `printf' function. */
+#define HAVE_PRINTF 1
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 to configure Berkeley DB for POSIX pthread API. */
+/* #undef HAVE_PTHREAD_API */
+
+/* Define to 1 if you have the `pthread_yield' function. */
+/* #undef HAVE_PTHREAD_YIELD */
+
+/* Define to 1 if you have the `pwrite' function. */
+/* #undef HAVE_PWRITE */
+
+/* Define to 1 if building on QNX. */
+/* #undef HAVE_QNX */
+
+/* Define to 1 if you have the `qsort' function. */
+#define HAVE_QSORT 1
+
+/* Define to 1 if building Queue access method. */
+/* #undef HAVE_QUEUE */
+
+/* Define to 1 if you have the `raise' function. */
+#define HAVE_RAISE 1
+
+/* Define to 1 if you have the `rand' function. */
+#define HAVE_RAND 1
+
+/* Define to 1 if building replication support. */
+/* #undef HAVE_REPLICATION */
+
+/* Define to 1 if building the Berkeley DB replication framework. */
+/* #undef HAVE_REPLICATION_THREADS */
+
+/* Define to 1 if building RPC client/server. */
+/* #undef HAVE_RPC */
+
+/* Define to 1 if building on S60. */
+#define HAVE_S60 1
+
+/* Define to 1 if you have the `sched_yield' function. */
+#define HAVE_SCHED_YIELD 1
+
+/* Define to 1 if you have the `select' function. */
+#define HAVE_SELECT 1
+
+/* Define to 1 if you have the `setgid' function. */
+#define HAVE_SETGID 1
+
+/* Define to 1 if you have the `setuid' function. */
+#define HAVE_SETUID 1
+
+/* Define to 1 if shmctl/SHM_LOCK locks down shared memory segments. */
+/* #undef HAVE_SHMCTL_SHM_LOCK */
+
+/* Define to 1 if you have the `shmget' function. */
+#define HAVE_SHMGET 1
+
+/* Define to 1 if you have the `sigaction' function. */
+/* #undef HAVE_SIGACTION */
+
+/* Define to 1 if thread identifier type db_threadid_t is integral. */
+#define HAVE_SIMPLE_THREAD_TYPE 1
+
+/* Define to 1 if you have the `snprintf' function. */
+#define HAVE_SNPRINTF 1
+
+/* Define to 1 if you have the `stat' function. */
+#define HAVE_STAT 1
+
+/* Define to 1 if building statistics support. */
+#define HAVE_STATISTICS 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#define HAVE_STRCASECMP 1
+
+/* Define to 1 if you have the `strcat' function. */
+#define HAVE_STRCAT 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strdup' function. */
+#define HAVE_STRDUP 1
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the `strftime' function. */
+#define HAVE_STRFTIME 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strncat' function. */
+#define HAVE_STRNCAT 1
+
+/* Define to 1 if you have the `strncmp' function. */
+#define HAVE_STRNCMP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strsep' function. */
+#define HAVE_STRSEP 1
+
+/* Define to 1 if you have the `strtol' function. */
+#define HAVE_STRTOL 1
+
+/* Define to 1 if you have the `strtoul' function. */
+#define HAVE_STRTOUL 1
+
+/* Define to 1 if `st_blksize' is member of `struct stat'. */
+/* #undef HAVE_STRUCT_STAT_ST_BLKSIZE */
+
+/* Define to 1 if you have the `sysconf' function. */
+#define HAVE_SYSCONF 1
+
+/* Define to 1 if port includes files in the Berkeley DB source code. */
+#define HAVE_SYSTEM_INCLUDE_FILES 1
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#define HAVE_SYS_SELECT_H 1
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+/* #undef HAVE_SYS_SOCKET_H */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the `time' function. */
+#define HAVE_TIME 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if unlink of file with open file descriptors will fail. */
+/* #undef HAVE_UNLINK_WITH_OPEN_FAILURE */
+
+/* Define to 1 if port includes historic database upgrade support. */
+/* #undef HAVE_UPGRADE_SUPPORT */
+
+/* Define to 1 if building access method verification support. */
+/* #undef HAVE_VERIFY */
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#define HAVE_VSNPRINTF 1
+
+/* Define to 1 if building on VxWorks. */
+/* #undef HAVE_VXWORKS */
+
+/* Define to 1 if you have the `yield' function. */
+/* #undef HAVE_YIELD */
+
+/* Define to 1 if you have the `_fstati64' function. */
+/* #undef HAVE__FSTATI64 */
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "Berkeley DB"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "Berkeley DB 4.7.25"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "db-4.7.25"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.7.25"
+
+/* The size of `char', as computed by sizeof. */
+#define SIZEOF_CHAR 1
+
+/* The size of `char *', as computed by sizeof. */
+#define SIZEOF_CHAR_P 4
+
+/* The size of `int', as computed by sizeof. */
+#define SIZEOF_INT 4
+
+/* The size of `long', as computed by sizeof. */
+#define SIZEOF_LONG 4
+
+/* The size of `long long', as computed by sizeof. */
+/* #undef SIZEOF_LONG_LONG */
+
+/* The size of `short', as computed by sizeof. */
+#define SIZEOF_SHORT 2
+
+/* The size of `size_t', as computed by sizeof. */
+#define SIZEOF_SIZE_T 4
+
+/* The size of `unsigned char', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_CHAR 1
+
+/* The size of `unsigned int', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_INT 4
+
+/* The size of `unsigned long', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_LONG 4
+
+/* The size of `unsigned long long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG_LONG */
+
+/* The size of `unsigned short', as computed by sizeof. */
+#define SIZEOF_UNSIGNED_SHORT 2
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+/* #undef TIME_WITH_SYS_TIME */
+
+/* Define to 1 to mask harmless uninitialized memory read/writes. */
+/* #undef UMRW */
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+/* #undef inline */
+#endif
+
+/* type to use in place of socklen_t if not defined */
+/* #undef socklen_t */

build_s60/db_int.h

@@ -0,0 +1,913 @@
+/* DO NOT EDIT: automatically built by dist/s_s60. */
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_int.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#ifndef _DB_INT_H_
+#define	_DB_INT_H_
+
+/*******************************************************
+ * Berkeley DB ANSI/POSIX include files.
+ *******************************************************/
+#ifdef HAVE_SYSTEM_INCLUDE_FILES
+#include <sys/types.h>
+#ifdef DIAG_MVCC
+#include <sys/mman.h>
+#endif
+#include <sys/stat.h>
+
+#if defined(__INCLUDE_SELECT_H)
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#ifdef HAVE_VXWORKS
+#include <selectLib.h>
+#endif
+#endif
+
+#if TIME_WITH_SYS_TIME
+#include <sys/time.h>
+#include <time.h>
+#else
+#if HAVE_SYS_TIME_H
+#include <sys/time.h>
+#else
+#include <time.h>
+#endif
+#endif
+
+#ifdef HAVE_VXWORKS
+#include <net/uio.h>
+#else
+#include <sys/uio.h>
+#endif
+
+#if defined(__INCLUDE_NETWORKING)
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#include <netinet/in.h>
+#include <netdb.h>
+#include <arpa/inet.h>
+#endif
+
+#if defined(STDC_HEADERS) || defined(__cplusplus)
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <signal.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#if defined(__INCLUDE_DIRECTORY)
+#if HAVE_DIRENT_H
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# if HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# if HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# if HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif
+#endif /* __INCLUDE_DIRECTORY */
+
+#endif /* !HAVE_SYSTEM_INCLUDE_FILES */
+
+#ifdef DB_WIN32
+#include "dbinc/win_db.h"
+#endif
+
+#include "db.h"
+#include "clib_port.h"
+
+#include "dbinc/queue.h"
+#include "dbinc/shqueue.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*******************************************************
+ * Forward structure declarations.
+ *******************************************************/
+struct __db_reginfo_t;	typedef struct __db_reginfo_t REGINFO;
+struct __db_txnhead;	typedef struct __db_txnhead DB_TXNHEAD;
+struct __db_txnlist;	typedef struct __db_txnlist DB_TXNLIST;
+struct __vrfy_childinfo;typedef struct __vrfy_childinfo VRFY_CHILDINFO;
+struct __vrfy_dbinfo;   typedef struct __vrfy_dbinfo VRFY_DBINFO;
+struct __vrfy_pageinfo; typedef struct __vrfy_pageinfo VRFY_PAGEINFO;
+
+typedef SH_TAILQ_HEAD(__hash_head) DB_HASHTAB;
+
+/*******************************************************
+ * General purpose constants and macros.
+ *******************************************************/
+#undef	FALSE
+#define	FALSE		0
+#undef	TRUE
+#define	TRUE		(!FALSE)
+
+#define	MEGABYTE	1048576
+#define	GIGABYTE	1073741824
+
+#define	NS_PER_MS	1000000		/* Nanoseconds in a millisecond */
+#define	NS_PER_US	1000		/* Nanoseconds in a microsecond */
+#define	NS_PER_SEC	1000000000	/* Nanoseconds in a second */
+#define	US_PER_MS	1000		/* Microseconds in a millisecond */
+#define	US_PER_SEC	1000000		/* Microseconds in a second */
+#define	MS_PER_SEC	1000		/* Milliseconds in a second */
+
+#define	RECNO_OOB	0		/* Illegal record number. */
+
+/* Test for a power-of-two (tests true for zero, which doesn't matter here). */
+#define	POWER_OF_TWO(x)	(((x) & ((x) - 1)) == 0)
+
+/* Test for valid page sizes. */
+#define	DB_MIN_PGSIZE	0x000200	/* Minimum page size (512). */
+#define	DB_MAX_PGSIZE	0x010000	/* Maximum page size (65536). */
+#define	IS_VALID_PAGESIZE(x)						\
+	(POWER_OF_TWO(x) && (x) >= DB_MIN_PGSIZE && ((x) <= DB_MAX_PGSIZE))
+
+/* Minimum number of pages cached, by default. */
+#define	DB_MINPAGECACHE	16
+
+/*
+ * If we are unable to determine the underlying filesystem block size, use
+ * 8K on the grounds that most OS's use less than 8K for a VM page size.
+ */
+#define	DB_DEF_IOSIZE	(8 * 1024)
+
+/* Align an integer to a specific boundary. */
+#undef	DB_ALIGN
+#define	DB_ALIGN(v, bound)						\
+	(((v) + (bound) - 1) & ~(((uintmax_t)(bound)) - 1))
+
+/* Increment a pointer to a specific boundary. */
+#undef	ALIGNP_INC
+#define	ALIGNP_INC(p, bound)						\
+	(void *)(((uintptr_t)(p) + (bound) - 1) & ~(((uintptr_t)(bound)) - 1))
+
+/*
+ * Print an address as a u_long (a u_long is the largest type we can print
+ * portably).  Most 64-bit systems have made longs 64-bits, so this should
+ * work.
+ */
+#define	P_TO_ULONG(p)	((u_long)(uintptr_t)(p))
+
+/*
+ * Convert a pointer to a small integral value.
+ *
+ * The (u_int16_t)(uintptr_t) cast avoids warnings: the (uintptr_t) cast
+ * converts the value to an integral type, and the (u_int16_t) cast converts
+ * it to a small integral type so we don't get complaints when we assign the
+ * final result to an integral type smaller than uintptr_t.
+ */
+#define	P_TO_UINT32(p)	((u_int32_t)(uintptr_t)(p))
+#define	P_TO_UINT16(p)	((u_int16_t)(uintptr_t)(p))
+
+/*
+ * There are several on-page structures that are declared to have a number of
+ * fields followed by a variable length array of items.  The structure size
+ * without including the variable length array or the address of the first of
+ * those elements can be found using SSZ.
+ *
+ * This macro can also be used to find the offset of a structure element in a
+ * structure.  This is used in various places to copy structure elements from
+ * unaligned memory references, e.g., pointers into a packed page.
+ *
+ * There are two versions because compilers object if you take the address of
+ * an array.
+ */
+#undef	SSZ
+#define	SSZ(name, field)  P_TO_UINT16(&(((name *)0)->field))
+
+#undef	SSZA
+#define	SSZA(name, field) P_TO_UINT16(&(((name *)0)->field[0]))
+
+/* Structure used to print flag values. */
+typedef struct __fn {
+	u_int32_t mask;			/* Flag value. */
+	const char *name;		/* Flag name. */
+} FN;
+
+/* Set, clear and test flags. */
+#define	FLD_CLR(fld, f)		(fld) &= ~(f)
+#define	FLD_ISSET(fld, f)	((fld) & (f))
+#define	FLD_SET(fld, f)		(fld) |= (f)
+#define	F_CLR(p, f)		(p)->flags &= ~(f)
+#define	F_ISSET(p, f)		((p)->flags & (f))
+#define	F_SET(p, f)		(p)->flags |= (f)
+#define	LF_CLR(f)		((flags) &= ~(f))
+#define	LF_ISSET(f)		((flags) & (f))
+#define	LF_SET(f)		((flags) |= (f))
+
+/*
+ * Calculate a percentage.  The values can overflow 32-bit integer arithmetic
+ * so we use floating point.
+ *
+ * When calculating a bytes-vs-page size percentage, we're getting the inverse
+ * of the percentage in all cases, that is, we want 100 minus the percentage we
+ * calculate.
+ */
+#define	DB_PCT(v, total)						\
+	((int)((total) == 0 ? 0 : ((double)(v) * 100) / (total)))
+#define	DB_PCT_PG(v, total, pgsize)					\
+	((int)((total) == 0 ? 0 :					\
+	    100 - ((double)(v) * 100) / (((double)total) * (pgsize))))
+
+/*
+ * Statistics update shared memory and so are expensive -- don't update the
+ * values unless we're going to display the results.
+ */
+#undef	STAT
+#ifdef	HAVE_STATISTICS
+#define	STAT(x)	x
+#else
+#define	STAT(x)
+#endif
+
+/*
+ * Structure used for callback message aggregation.
+ *
+ * Display values in XXX_stat_print calls.
+ */
+typedef struct __db_msgbuf {
+	char *buf;			/* Heap allocated buffer. */
+	char *cur;			/* Current end of message. */
+	size_t len;			/* Allocated length of buffer. */
+} DB_MSGBUF;
+#define	DB_MSGBUF_INIT(a) do {						\
+	(a)->buf = (a)->cur = NULL;					\
+	(a)->len = 0;							\
+} while (0)
+#define	DB_MSGBUF_FLUSH(env, a) do {					\
+	if ((a)->buf != NULL) {						\
+		if ((a)->cur != (a)->buf)				\
+			__db_msg(env, "%s", (a)->buf);		\
+		__os_free(env, (a)->buf);				\
+		DB_MSGBUF_INIT(a);					\
+	}								\
+} while (0)
+#define	STAT_FMT(msg, fmt, type, v) do {				\
+	DB_MSGBUF __mb;							\
+	DB_MSGBUF_INIT(&__mb);						\
+	__db_msgadd(env, &__mb, fmt, (type)(v));			\
+	__db_msgadd(env, &__mb, "\t%s", msg);				\
+	DB_MSGBUF_FLUSH(env, &__mb);					\
+} while (0)
+#define	STAT_HEX(msg, v)						\
+	__db_msg(env, "%#lx\t%s", (u_long)(v), msg)
+#define	STAT_ISSET(msg, p)						\
+	__db_msg(env, "%sSet\t%s", (p) == NULL ? "!" : " ", msg)
+#define	STAT_LONG(msg, v)						\
+	__db_msg(env, "%ld\t%s", (long)(v), msg)
+#define	STAT_LSN(msg, lsnp)						\
+	__db_msg(env, "%lu/%lu\t%s",					\
+	    (u_long)(lsnp)->file, (u_long)(lsnp)->offset, msg)
+#define	STAT_POINTER(msg, v)						\
+	__db_msg(env, "%#lx\t%s", P_TO_ULONG(v), msg)
+#define	STAT_STRING(msg, p) do {					\
+	const char *__p = p;	/* p may be a function call. */		\
+	__db_msg(env, "%s\t%s", __p == NULL ? "!Set" : __p, msg);	\
+} while (0)
+#define	STAT_ULONG(msg, v)						\
+	__db_msg(env, "%lu\t%s", (u_long)(v), msg)
+
+/*
+ * There are quite a few places in Berkeley DB where we want to initialize
+ * a DBT from a string or other random pointer type, using a length typed
+ * to size_t in most cases.  This macro avoids a lot of casting.  The macro
+ * comes in two flavors because we often want to clear the DBT first.
+ */
+#define	DB_SET_DBT(dbt, d, s)  do {					\
+	(dbt).data = (void *)(d);					\
+	(dbt).size = (u_int32_t)(s);					\
+} while (0)
+#define	DB_INIT_DBT(dbt, d, s)  do {					\
+	memset(&(dbt), 0, sizeof(dbt));					\
+	DB_SET_DBT(dbt, d, s);						\
+} while (0)
+
+/*******************************************************
+ * API return values
+ *******************************************************/
+/*
+ * Return values that are OK for each different call.  Most calls have a
+ * standard 'return of 0 is only OK value', but some, like db->get have
+ * DB_NOTFOUND as a return value, but it really isn't an error.
+ */
+#define	DB_RETOK_STD(ret)	((ret) == 0)
+#define	DB_RETOK_DBCDEL(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCGET(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBDEL(ret)	DB_RETOK_DBCDEL(ret)
+#define	DB_RETOK_DBGET(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_DBPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST)
+#define	DB_RETOK_EXISTS(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_LGGET(ret)	((ret) == 0 || (ret) == DB_NOTFOUND)
+#define	DB_RETOK_MPGET(ret)	((ret) == 0 || (ret) == DB_PAGE_NOTFOUND)
+#define	DB_RETOK_REPPMSG(ret)	((ret) == 0 || \
+				    (ret) == DB_REP_IGNORE || \
+				    (ret) == DB_REP_ISPERM || \
+				    (ret) == DB_REP_NEWMASTER || \
+				    (ret) == DB_REP_NEWSITE || \
+				    (ret) == DB_REP_NOTPERM)
+
+/* Find a reasonable operation-not-supported error. */
+#ifdef	EOPNOTSUPP
+#define	DB_OPNOTSUP	EOPNOTSUPP
+#else
+#ifdef	ENOTSUP
+#define	DB_OPNOTSUP	ENOTSUP
+#else
+#define	DB_OPNOTSUP	EINVAL
+#endif
+#endif
+
+/*******************************************************
+ * Files.
+ *******************************************************/
+/*
+ * We use 1024 as the maximum path length.  It's too hard to figure out what
+ * the real path length is, as it was traditionally stored in <sys/param.h>,
+ * and that file isn't always available.
+ */
+#define	DB_MAXPATHLEN	1024
+
+#define	PATH_DOT	"."	/* Current working directory. */
+				/* Path separator character(s). */
+#define	PATH_SEPARATOR	"\\/:"
+
+/*******************************************************
+ * Environment.
+ *******************************************************/
+/* Type passed to __db_appname(). */
+typedef enum {
+	DB_APP_NONE=0,			/* No type (region). */
+	DB_APP_DATA,			/* Data file. */
+	DB_APP_LOG,			/* Log file. */
+	DB_APP_TMP			/* Temporary file. */
+} APPNAME;
+
+/*
+ * A set of macros to check if various functionality has been configured.
+ *
+ * ALIVE_ON	The is_alive function is configured.
+ * CDB_LOCKING	CDB product locking.
+ * CRYPTO_ON	Security has been configured.
+ * LOCKING_ON	Locking has been configured.
+ * LOGGING_ON	Logging has been configured.
+ * MUTEX_ON	Mutexes have been configured.
+ * MPOOL_ON	Memory pool has been configured.
+ * REP_ON	Replication has been configured.
+ * RPC_ON	RPC has been configured.
+ * TXN_ON	Transactions have been configured.
+ *
+ * REP_ON is more complex than most: if the BDB library was compiled without
+ * replication support, ENV->rep_handle will be NULL; if the BDB library has
+ * replication support, but it was not configured, the region reference will
+ * be NULL.
+ */
+#define	ALIVE_ON(env)		((env)->dbenv->is_alive != NULL)
+#define	CDB_LOCKING(env)	F_ISSET(env, ENV_CDB)
+#define	CRYPTO_ON(env)		((env)->crypto_handle != NULL)
+#define	LOCKING_ON(env)		((env)->lk_handle != NULL)
+#define	LOGGING_ON(env)		((env)->lg_handle != NULL)
+#define	MPOOL_ON(env)		((env)->mp_handle != NULL)
+#define	MUTEX_ON(env)		((env)->mutex_handle != NULL)
+#define	REP_ON(env)							\
+	((env)->rep_handle != NULL && (env)->rep_handle->region != NULL)
+#define	RPC_ON(dbenv)		((dbenv)->cl_handle != NULL)
+#define	TXN_ON(env)		((env)->tx_handle != NULL)
+
+/*
+ * STD_LOCKING	Standard locking, that is, locking was configured and CDB
+ *		was not.  We do not do locking in off-page duplicate trees,
+ *		so we check for that in the cursor first.
+ */
+#define	STD_LOCKING(dbc)						\
+	(!F_ISSET(dbc, DBC_OPD) &&					\
+	    !CDB_LOCKING((dbc)->env) && LOCKING_ON((dbc)->env))
+
+/*
+ * IS_RECOVERING: The system is running recovery.
+ */
+#define	IS_RECOVERING(env)						\
+	(LOGGING_ON(env) && F_ISSET((env)->lg_handle, DBLOG_RECOVER))
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	ENV_ILLEGAL_AFTER_OPEN(env, name)				\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 1));
+#define	ENV_ILLEGAL_BEFORE_OPEN(env, name)				\
+	if (!F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 0));
+
+/* We're not actually user hostile, honest. */
+#define	ENV_REQUIRES_CONFIG(env, handle, i, flags)			\
+	if (handle == NULL)						\
+		return (__env_not_config(env, i, flags));
+#define	ENV_REQUIRES_CONFIG_XX(env, handle, i, flags)			\
+	if ((env)->handle->region == NULL)				\
+		return (__env_not_config(env, i, flags));
+#define	ENV_NOT_CONFIGURED(env, handle, i, flags)			\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		ENV_REQUIRES_CONFIG(env, handle, i, flags)
+
+#define	ENV_ENTER(env, ip) do {						\
+	int __ret;							\
+	PANIC_CHECK(env);						\
+	if ((env)->thr_hashtab == NULL)					\
+		ip = NULL;						\
+	else {								\
+		if ((__ret =						\
+		    __env_set_state(env, &(ip), THREAD_ACTIVE)) != 0)	\
+			return (__ret);					\
+	}								\
+} while (0)
+
+#define ENV_GET_THREAD_INFO(env, ip) ENV_ENTER(env, ip)
+
+#ifdef DIAGNOSTIC
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL) {						\
+		DB_ASSERT(env, (ip)->dbth_state == THREAD_ACTIVE);	\
+		(ip)->dbth_state = THREAD_OUT;				\
+	}								\
+} while (0)
+#else
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL)						\
+		(ip)->dbth_state = THREAD_OUT;				\
+} while (0)
+#endif
+#ifdef DIAGNOSTIC
+#define	CHECK_THREAD(env) do {						\
+	if ((env)->thr_hashtab != NULL)					\
+		(void)__env_set_state(env, NULL, THREAD_VERIFY);	\
+} while (0)
+#ifdef HAVE_STATISTICS
+#define	CHECK_MTX_THREAD(env, mtx) do {					\
+	if (mtx->alloc_id != MTX_MUTEX_REGION &&			\
+	    mtx->alloc_id != MTX_ENV_REGION &&				\
+	    mtx->alloc_id != MTX_APPLICATION)				\
+		CHECK_THREAD(env);					\
+} while (0)
+#else
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+#else
+#define	CHECK_THREAD(env)
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+
+typedef enum {
+	THREAD_SLOT_NOT_IN_USE=0,
+	THREAD_OUT,
+	THREAD_ACTIVE,
+	THREAD_BLOCKED,
+	THREAD_BLOCKED_DEAD
+#ifdef DIAGNOSTIC
+	, THREAD_VERIFY
+#endif
+} DB_THREAD_STATE;
+
+typedef struct __pin_list {
+	roff_t b_ref;		/* offset to buffer. */
+	int region;		/* region containing buffer. */
+} PIN_LIST;
+#define PINMAX 4
+
+struct __db_thread_info {
+	pid_t		dbth_pid;
+	db_threadid_t	dbth_tid;
+	DB_THREAD_STATE	dbth_state;
+	SH_TAILQ_ENTRY	dbth_links;
+	/*
+	 * The following fields track which buffers this thread of 
+	 * control has pinned in the mpool buffer cache.
+	 */
+	u_int16_t	dbth_pincount;	/* Number of pins for this thread. */
+	u_int16_t	dbth_pinmax;	/* Number of slots allocated. */
+	roff_t		dbth_pinlist;	/* List of pins. */
+	PIN_LIST	dbth_pinarray[PINMAX];	/* Initial array of slots. */
+};
+
+typedef struct __env_thread_info {
+	u_int32_t	thr_count;
+	u_int32_t	thr_max;
+	u_int32_t	thr_nbucket;
+	roff_t		thr_hashoff;
+} THREAD_INFO;
+
+#define	DB_EVENT(env, e, einfo) do {					\
+	DB_ENV *__dbenv = (env)->dbenv;					\
+	if (__dbenv->db_event_func != NULL)				\
+		__dbenv->db_event_func(__dbenv, e, einfo);		\
+} while (0)
+
+typedef struct __flag_map {
+	u_int32_t inflag, outflag;
+} FLAG_MAP;
+
+/*
+ * Internal database environment structure.
+ *
+ * This is the private database environment handle.  The public environment
+ * handle is the DB_ENV structure.   The library owns this structure, the user
+ * owns the DB_ENV structure.  The reason there are two structures is because
+ * the user's configuration outlives any particular DB_ENV->open call, and
+ * separate structures allows us to easily discard internal information without
+ * discarding the user's configuration.
+ */
+struct __env {
+	DB_ENV *dbenv;			/* Linked DB_ENV structure */
+
+	/*
+	 * The ENV structure can be used concurrently, so field access is
+	 * protected.
+	 */
+	db_mutex_t mtx_env;		/* ENV structure mutex */
+
+	/*
+	 * Some fields are included in the ENV structure rather than in the
+	 * DB_ENV structure because they are only set as arguments to the
+	 * DB_ENV->open method.  In other words, because of the historic API,
+	 * not for any rational reason.
+	 *
+	 * Arguments to DB_ENV->open.
+	 */
+	char	 *db_home;		/* Database home */
+	u_int32_t open_flags;		/* Flags */
+	int	  db_mode;		/* Default open permissions */
+
+	pid_t	pid_cache;		/* Cached process ID */
+
+	DB_FH	*lockfhp;		/* fcntl(2) locking file handle */
+
+	DB_LOCKER *env_lref;		/* Locker in non-threaded handles */
+
+	DB_DISTAB   recover_dtab;	/* Dispatch table for recover funcs */
+
+	int dir_mode;			/* Intermediate directory perms. */
+
+	/* Thread tracking */
+	u_int32_t	 thr_nbucket;	/* Number of hash buckets */
+	DB_HASHTAB	*thr_hashtab;	/* Hash table of DB_THREAD_INFO */
+
+	/* Mutex allocation */
+	struct {
+		int	  alloc_id;	/* Allocation ID argument */
+		u_int32_t flags;	/* Flags argument */
+	} *mutex_iq;			/* Initial mutexes queue */
+	u_int		mutex_iq_next;	/* Count of initial mutexes */
+	u_int		mutex_iq_max;	/* Maximum initial mutexes */
+
+	/*
+	 * List of open DB handles for this ENV, used for cursor
+	 * adjustment.  Must be protected for multi-threaded support.
+	 */
+	db_mutex_t mtx_dblist;
+	int	   db_ref;		/* DB handle reference count */
+	TAILQ_HEAD(__dblist, __db) dblist;
+
+	/*
+	 * XA support.
+	 */
+	int		 xa_rmid;		/* XA Resource Manager ID */
+	TAILQ_ENTRY(__env) links;		/* XA environments */
+	TAILQ_HEAD(__xa_txn, __db_txn) xa_txn;	/* XA active transactions */
+
+	/*
+	 * List of open file handles for this ENV.  Must be protected
+	 * for multi-threaded support.
+	 */
+	TAILQ_HEAD(__fdlist, __fh_t) fdlist;
+
+	db_mutex_t	 mtx_mt;	/* Mersenne Twister mutex */
+	int		 mti;		/* Mersenne Twister index */
+	u_long		*mt;		/* Mersenne Twister state vector */
+
+	DB_CIPHER	*crypto_handle;	/* Crypto handle */
+	DB_LOCKTAB	*lk_handle;	/* Lock handle */
+	DB_LOG		*lg_handle;	/* Log handle */
+	DB_MPOOL	*mp_handle;	/* Mpool handle */
+	DB_MUTEXMGR	*mutex_handle;	/* Mutex handle */
+	DB_REP		*rep_handle;	/* Replication handle */
+	DB_TXNMGR	*tx_handle;	/* Txn handle */
+
+	/* Application callback to copy data to/from a custom data source */
+#define	DB_USERCOPY_GETDATA	0x0001
+#define	DB_USERCOPY_SETDATA	0x0002
+	int (*dbt_usercopy)
+	    __P((DBT *, u_int32_t, void *, u_int32_t, u_int32_t));
+
+	REGINFO	*reginfo;		/* REGINFO structure reference */
+
+#define	DB_TEST_ELECTINIT	 1	/* after __rep_elect_init */
+#define	DB_TEST_ELECTVOTE1	 2	/* after sending VOTE1 */
+#define	DB_TEST_POSTDESTROY	 3	/* after destroy op */
+#define	DB_TEST_POSTLOG		 4	/* after logging all pages */
+#define	DB_TEST_POSTLOGMETA	 5	/* after logging meta in btree */
+#define	DB_TEST_POSTOPEN	 6	/* after __os_open */
+#define	DB_TEST_POSTSYNC	 7	/* after syncing the log */
+#define	DB_TEST_PREDESTROY	 8	/* before destroy op */
+#define	DB_TEST_PREOPEN		 9	/* before __os_open */
+#define	DB_TEST_SUBDB_LOCKS	 10	/* subdb locking tests */
+	int	test_abort;		/* Abort value for testing */
+	int	test_check;		/* Checkpoint value for testing */
+	int	test_copy;		/* Copy value for testing */
+
+#define	ENV_CDB			0x00000001 /* DB_INIT_CDB */
+#define	ENV_DBLOCAL		0x00000002 /* Environment for a private DB */
+#define	ENV_LITTLEENDIAN	0x00000004 /* Little endian system. */
+#define	ENV_LOCKDOWN		0x00000008 /* DB_LOCKDOWN set */
+#define	ENV_NO_OUTPUT_SET	0x00000010 /* No output channel set */
+#define	ENV_OPEN_CALLED		0x00000020 /* DB_ENV->open called */
+#define	ENV_PRIVATE		0x00000040 /* DB_PRIVATE set */
+#define	ENV_RECOVER_FATAL	0x00000080 /* Doing fatal recovery in env */
+#define	ENV_REF_COUNTED		0x00000100 /* Region references this handle */
+#define	ENV_SYSTEM_MEM		0x00000200 /* DB_SYSTEM_MEM set */
+#define	ENV_THREAD		0x00000400 /* DB_THREAD set */
+	u_int32_t flags;
+};
+
+/*******************************************************
+ * Database Access Methods.
+ *******************************************************/
+/*
+ * DB_IS_THREADED --
+ *	The database handle is free-threaded (was opened with DB_THREAD).
+ */
+#define	DB_IS_THREADED(dbp)						\
+	((dbp)->mutex != MUTEX_INVALID)
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	DB_ILLEGAL_AFTER_OPEN(dbp, name)				\
+	if (F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 1));
+#define	DB_ILLEGAL_BEFORE_OPEN(dbp, name)				\
+	if (!F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 0));
+/* Some initialization methods are illegal if environment isn't local. */
+#define	DB_ILLEGAL_IN_ENV(dbp, name)					\
+	if (!F_ISSET((dbp)->env, ENV_DBLOCAL))				\
+		return (__db_mi_env((dbp)->env, name));
+#define	DB_ILLEGAL_METHOD(dbp, flags) {					\
+	int __ret;							\
+	if ((__ret = __dbh_am_chk(dbp, flags)) != 0)			\
+		return (__ret);						\
+}
+
+/*
+ * Common DBC->internal fields.  Each access method adds additional fields
+ * to this list, but the initial fields are common.
+ */
+#define	__DBC_INTERNAL							\
+	DBC	 *opd;			/* Off-page duplicate cursor. */\
+									\
+	void	 *page;			/* Referenced page. */		\
+	db_pgno_t root;			/* Tree root. */		\
+	db_pgno_t pgno;			/* Referenced page number. */	\
+	db_indx_t indx;			/* Referenced key item index. */\
+									\
+	DB_LOCK		lock;		/* Cursor lock. */		\
+	db_lockmode_t	lock_mode;	/* Lock mode. */
+
+struct __dbc_internal {
+	__DBC_INTERNAL
+};
+
+/* Actions that __db_master_update can take. */
+typedef enum { MU_REMOVE, MU_RENAME, MU_OPEN } mu_action;
+
+/*
+ * Access-method-common macro for determining whether a cursor
+ * has been initialized.
+ */
+#define	IS_INITIALIZED(dbc)	((dbc)->internal->pgno != PGNO_INVALID)
+
+/* Free the callback-allocated buffer, if necessary, hanging off of a DBT. */
+#define	FREE_IF_NEEDED(env, dbt)					\
+	if (F_ISSET((dbt), DB_DBT_APPMALLOC)) {				\
+		__os_ufree((env), (dbt)->data);				\
+		F_CLR((dbt), DB_DBT_APPMALLOC);				\
+	}
+
+/*
+ * Use memory belonging to object "owner" to return the results of
+ * any no-DBT-flag get ops on cursor "dbc".
+ */
+#define	SET_RET_MEM(dbc, owner)				\
+	do {						\
+		(dbc)->rskey = &(owner)->my_rskey;	\
+		(dbc)->rkey = &(owner)->my_rkey;	\
+		(dbc)->rdata = &(owner)->my_rdata;	\
+	} while (0)
+
+/* Use the return-data memory src is currently set to use in dest as well. */
+#define	COPY_RET_MEM(src, dest)				\
+	do {						\
+		(dest)->rskey = (src)->rskey;		\
+		(dest)->rkey = (src)->rkey;		\
+		(dest)->rdata = (src)->rdata;		\
+	} while (0)
+
+/* Reset the returned-memory pointers to their defaults. */
+#define	RESET_RET_MEM(dbc)				\
+	do {						\
+		(dbc)->rskey = &(dbc)->my_rskey;	\
+		(dbc)->rkey = &(dbc)->my_rkey;		\
+		(dbc)->rdata = &(dbc)->my_rdata;	\
+	} while (0)
+
+/*******************************************************
+ * Mpool.
+ *******************************************************/
+/*
+ * File types for DB access methods.  Negative numbers are reserved to DB.
+ */
+#define	DB_FTYPE_SET		-1		/* Call pgin/pgout functions. */
+#define	DB_FTYPE_NOTSET		 0		/* Don't call... */
+#define	DB_LSN_OFF_NOTSET	-1		/* Not yet set. */
+#define	DB_CLEARLEN_NOTSET	UINT32_MAX	/* Not yet set. */
+
+/* Structure used as the DB pgin/pgout pgcookie. */
+typedef struct __dbpginfo {
+	size_t	db_pagesize;		/* Underlying page size. */
+	u_int32_t flags;		/* Some DB_AM flags needed. */
+	DBTYPE  type;			/* DB type */
+} DB_PGINFO;
+
+/*******************************************************
+ * Log.
+ *******************************************************/
+/* Initialize an LSN to 'zero'. */
+#define	ZERO_LSN(LSN) do {						\
+	(LSN).file = 0;							\
+	(LSN).offset = 0;						\
+} while (0)
+#define	IS_ZERO_LSN(LSN)	((LSN).file == 0 && (LSN).offset == 0)
+
+#define	IS_INIT_LSN(LSN)	((LSN).file == 1 && (LSN).offset == 0)
+#define	INIT_LSN(LSN)		do {					\
+	(LSN).file = 1;							\
+	(LSN).offset = 0;						\
+} while (0)
+
+#define	MAX_LSN(LSN) do {						\
+	(LSN).file = UINT32_MAX;					\
+	(LSN).offset = UINT32_MAX;					\
+} while (0)
+#define	IS_MAX_LSN(LSN) \
+	((LSN).file == UINT32_MAX && (LSN).offset == UINT32_MAX)
+
+/* If logging is turned off, smash the lsn. */
+#define	LSN_NOT_LOGGED(LSN) do {					\
+	(LSN).file = 0;							\
+	(LSN).offset = 1;						\
+} while (0)
+#define	IS_NOT_LOGGED_LSN(LSN) \
+	((LSN).file == 0 && (LSN).offset == 1)
+
+/*
+ * LOG_COMPARE -- compare two LSNs.
+ */
+
+#define	LOG_COMPARE(lsn0, lsn1)						\
+    ((lsn0)->file != (lsn1)->file ?					\
+    ((lsn0)->file < (lsn1)->file ? -1 : 1) :				\
+    ((lsn0)->offset != (lsn1)->offset ?					\
+    ((lsn0)->offset < (lsn1)->offset ? -1 : 1) : 0))
+
+/*******************************************************
+ * Txn.
+ *******************************************************/
+#define	DB_NONBLOCK(C)	((C)->txn != NULL && F_ISSET((C)->txn, TXN_NOWAIT))
+#define	NOWAIT_FLAG(txn) \
+	((txn) != NULL && F_ISSET((txn), TXN_NOWAIT) ? DB_LOCK_NOWAIT : 0)
+#define	IS_REAL_TXN(txn)						\
+	((txn) != NULL && !F_ISSET(txn, TXN_CDSGROUP))
+#define	IS_SUBTRANSACTION(txn)						\
+	((txn) != NULL && (txn)->parent != NULL)
+
+/*******************************************************
+ * Crypto.
+ *******************************************************/
+#define	DB_IV_BYTES     16		/* Bytes per IV */
+#define	DB_MAC_KEY	20		/* Bytes per MAC checksum */
+
+/*******************************************************
+ * Secondaries over RPC.
+ *******************************************************/
+#ifdef CONFIG_TEST
+/*
+ * These are flags passed to DB->associate calls by the Tcl API if running
+ * over RPC.  The RPC server will mask out these flags before making the real
+ * DB->associate call.
+ *
+ * These flags must coexist with the valid flags to DB->associate (currently
+ * DB_AUTO_COMMIT and DB_CREATE).  DB_AUTO_COMMIT is in the group of
+ * high-order shared flags (0xff000000), and DB_CREATE is in the low-order
+ * group (0x00000fff), so we pick a range in between.
+ */
+#define	DB_RPC2ND_MASK		0x00f00000 /* Reserved bits. */
+
+#define	DB_RPC2ND_REVERSEDATA	0x00100000 /* callback_n(0) _s_reversedata. */
+#define	DB_RPC2ND_NOOP		0x00200000 /* callback_n(1) _s_noop */
+#define	DB_RPC2ND_CONCATKEYDATA	0x00300000 /* callback_n(2) _s_concatkeydata */
+#define	DB_RPC2ND_CONCATDATAKEY 0x00400000 /* callback_n(3) _s_concatdatakey */
+#define	DB_RPC2ND_REVERSECONCAT	0x00500000 /* callback_n(4) _s_reverseconcat */
+#define	DB_RPC2ND_TRUNCDATA	0x00600000 /* callback_n(5) _s_truncdata */
+#define	DB_RPC2ND_CONSTANT	0x00700000 /* callback_n(6) _s_constant */
+#define	DB_RPC2ND_GETZIP	0x00800000 /* sj_getzip */
+#define	DB_RPC2ND_GETNAME	0x00900000 /* sj_getname */
+#endif
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*******************************************************
+ * Remaining general DB includes.
+ *******************************************************/
+
+
+#include "dbinc/globals.h"
+#include "dbinc/clock.h"
+#include "dbinc/debug.h"
+#include "dbinc/region.h"
+#include "dbinc_auto/env_ext.h"
+#include "dbinc/mutex.h"
+#ifdef HAVE_REPLICATION_THREADS
+#include "dbinc/repmgr.h"
+#endif
+#include "dbinc/rep.h"
+#include "dbinc/os.h"
+#include "dbinc_auto/clib_ext.h"
+#include "dbinc_auto/common_ext.h"
+
+/*******************************************************
+ * Remaining Log.
+ * These need to be defined after the general includes
+ * because they need rep.h from above.
+ *******************************************************/
+/*
+ * Test if the environment is currently logging changes.  If we're in recovery
+ * or we're a replication client, we don't need to log changes because they're
+ * already in the log, even though we have a fully functional log system.
+ */
+#define	DBENV_LOGGING(env)						\
+	(LOGGING_ON(env) && !IS_REP_CLIENT(env) && (!IS_RECOVERING(env)))
+
+/*
+ * Test if we need to log a change.  By default, we don't log operations without
+ * associated transactions, unless DIAGNOSTIC, DEBUG_ROP or DEBUG_WOP are on.
+ * This is because we want to get log records for read/write operations, and, if
+ * we are trying to debug something, more information is always better.
+ *
+ * The DBC_RECOVER flag is set when we're in abort, as well as during recovery;
+ * thus DBC_LOGGING may be false for a particular dbc even when DBENV_LOGGING
+ * is true.
+ *
+ * We explicitly use LOGGING_ON/IS_REP_CLIENT here because we don't want to pull
+ * in the log headers, which IS_RECOVERING (and thus DBENV_LOGGING) rely on, and
+ * because DBC_RECOVER should be set anytime IS_RECOVERING would be true.
+ *
+ * If we're not in recovery (master - doing an abort or a client applying
+ * a txn), then a client's only path through here is on an internal
+ * operation, and a master's only path through here is a transactional
+ * operation.  Detect if either is not the case.
+ */
+#if defined(DIAGNOSTIC) || defined(DEBUG_ROP)  || defined(DEBUG_WOP)
+#define	DBC_LOGGING(dbc)	__dbc_logging(dbc)
+#else
+#define	DBC_LOGGING(dbc)						\
+	((dbc)->txn != NULL && LOGGING_ON((dbc)->env) &&		\
+	    !F_ISSET((dbc), DBC_RECOVER) && !IS_REP_CLIENT((dbc)->env))
+#endif
+
+#endif /* !_DB_INT_H_ */

build_unix/.IGNORE_ME

@@ -0,0 +1,3 @@
+Some combinations of the gzip and tar archive exploders found
+on Linux systems ignore directories that don't have any files
+(other than symbolic links) in them.  So, here's a file.

build_vxworks/BerkeleyDB20.wsp

@@ -0,0 +1,29 @@
+Document file - DO NOT EDIT
+
+<BEGIN> CORE_INFO_TYPE
+Workspace
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+
+<BEGIN> projectList
+$(PRJ_DIR)/BerkeleyDB20.wpj \
+	$(PRJ_DIR)/db_archive/db_archive20.wpj \
+	$(PRJ_DIR)/db_checkpoint/db_checkpoint20.wpj \
+	$(PRJ_DIR)/db_deadlock/db_deadlock20.wpj \
+	$(PRJ_DIR)/db_dump/db_dump20.wpj \
+	$(PRJ_DIR)/db_load/db_load20.wpj \
+	$(PRJ_DIR)/db_printlog/db_printlog20.wpj \
+	$(PRJ_DIR)/db_recover/db_recover20.wpj \
+	$(PRJ_DIR)/db_stat/db_stat20.wpj \
+	$(PRJ_DIR)/db_upgrade/db_upgrade20.wpj \
+	$(PRJ_DIR)/db_verify/db_verify20.wpj \
+	$(PRJ_DIR)/dbdemo/dbdemo20.wpj
+<END>
+
+<BEGIN> userComments
+
+<END>
+

build_vxworks/BerkeleyDB20small.wsp

@@ -0,0 +1,29 @@
+Document file - DO NOT EDIT
+
+<BEGIN> CORE_INFO_TYPE
+Workspace
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+
+<BEGIN> projectList
+$(PRJ_DIR)/BerkeleyDB20small.wpj \
+	$(PRJ_DIR)/db_archive/db_archive20.wpj \
+	$(PRJ_DIR)/db_checkpoint/db_checkpoint20.wpj \
+	$(PRJ_DIR)/db_deadlock/db_deadlock20.wpj \
+	$(PRJ_DIR)/db_dump/db_dump20.wpj \
+	$(PRJ_DIR)/db_load/db_load20.wpj \
+	$(PRJ_DIR)/db_printlog/db_printlog20.wpj \
+	$(PRJ_DIR)/db_recover/db_recover20.wpj \
+	$(PRJ_DIR)/db_stat/db_stat20.wpj \
+	$(PRJ_DIR)/db_upgrade/db_upgrade20.wpj \
+	$(PRJ_DIR)/db_verify/db_verify20.wpj \
+	$(PRJ_DIR)/dbdemo/dbdemo20.wpj
+<END>
+
+<BEGIN> userComments
+
+<END>
+

build_vxworks/BerkeleyDB22.wsp

@@ -0,0 +1,29 @@
+Document file - DO NOT EDIT
+
+<BEGIN> CORE_INFO_TYPE
+Workspace
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+
+<BEGIN> projectList
+$(PRJ_DIR)/BerkeleyDB22.wpj \
+	$(PRJ_DIR)/db_archive/db_archive22.wpj \
+	$(PRJ_DIR)/db_checkpoint/db_checkpoint22.wpj \
+	$(PRJ_DIR)/db_deadlock/db_deadlock22.wpj \
+	$(PRJ_DIR)/db_dump/db_dump22.wpj \
+	$(PRJ_DIR)/db_load/db_load22.wpj \
+	$(PRJ_DIR)/db_printlog/db_printlog22.wpj \
+	$(PRJ_DIR)/db_recover/db_recover22.wpj \
+	$(PRJ_DIR)/db_stat/db_stat22.wpj \
+	$(PRJ_DIR)/db_upgrade/db_upgrade22.wpj \
+	$(PRJ_DIR)/db_verify/db_verify22.wpj \
+	$(PRJ_DIR)/dbdemo/dbdemo22.wpj
+<END>
+
+<BEGIN> userComments
+
+<END>
+

build_vxworks/BerkeleyDB22small.wsp

@@ -0,0 +1,29 @@
+Document file - DO NOT EDIT
+
+<BEGIN> CORE_INFO_TYPE
+Workspace
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+
+<BEGIN> projectList
+$(PRJ_DIR)/BerkeleyDB22small.wpj \
+	$(PRJ_DIR)/db_archive/db_archive22.wpj \
+	$(PRJ_DIR)/db_checkpoint/db_checkpoint22.wpj \
+	$(PRJ_DIR)/db_deadlock/db_deadlock22.wpj \
+	$(PRJ_DIR)/db_dump/db_dump22.wpj \
+	$(PRJ_DIR)/db_load/db_load22.wpj \
+	$(PRJ_DIR)/db_printlog/db_printlog22.wpj \
+	$(PRJ_DIR)/db_recover/db_recover22.wpj \
+	$(PRJ_DIR)/db_stat/db_stat22.wpj \
+	$(PRJ_DIR)/db_upgrade/db_upgrade22.wpj \
+	$(PRJ_DIR)/db_verify/db_verify22.wpj \
+	$(PRJ_DIR)/dbdemo/dbdemo22.wpj
+<END>
+
+<BEGIN> userComments
+
+<END>
+

build_vxworks/clib_port.h

@@ -0,0 +1,276 @@
+/* DO NOT EDIT: automatically built from dist/clib_port.in. */
+/*
+ * Minimum/maximum values for various types.
+ */
+#ifndef	UINT16_MAX			/* Maximum 16-bit unsigned. */
+#define	UINT16_MAX	65535
+#endif
+#ifndef	UINT32_MAX			/* Maximum 32-bit unsigned. */
+#define	UINT32_MAX	4294967295U
+#endif
+
+#ifndef	INT_MAX
+#if SIZEOF_INT == 4
+#define	INT_MAX		2147483647
+#endif
+#if SIZEOF_INT == 8
+#define	INT_MAX		9223372036854775807
+#endif
+#endif
+
+#ifndef	INT_MIN				/* minimum (signed) int value */
+#define	INT_MIN		(-INT_MAX-1)
+#endif
+
+#ifndef	UINT_MAX			/* maximum (signed) int value */
+#if SIZEOF_INT == 4
+#define	UINT_MAX	4294967295U
+#endif
+#if SIZEOF_INT == 8
+#define	UINT_MAX	18446744073709551615U
+#endif
+#endif
+
+#ifndef	LONG_MAX			/* maximum (signed) long value */
+#if SIZEOF_LONG == 4
+#define	LONG_MAX	2147483647
+#endif
+#if SIZEOF_LONG == 8
+#define	LONG_MAX	9223372036854775807L
+#endif
+#endif
+
+#ifndef	LONG_MIN			/* minimum (signed) long value */
+#define	LONG_MIN	(-LONG_MAX-1)
+#endif
+
+#ifndef	ULONG_MAX			/* maximum (unsigned) long value */
+#if SIZEOF_LONG == 4
+#define	ULONG_MAX	4294967295U
+#endif
+#if SIZEOF_LONG == 8
+#define	ULONG_MAX	18446744073709551615UL
+#endif
+#endif
+
+#if defined(HAVE_64BIT_TYPES)
+/*
+ * Override the system's 64-bit min/max constants.  AIX's 32-bit compiler can
+ * handle 64-bit values, but the system's constants don't include the LL/ULL
+ * suffix, and so can't be compiled using the 32-bit compiler.
+ */
+#undef	INT64_MAX
+#undef	INT64_MIN
+#undef	UINT64_MAX
+
+#ifdef	DB_WIN32
+#define	INT64_MAX	_I64_MAX
+#define	INT64_MIN	_I64_MIN
+#define	UINT64_MAX	_UI64_MAX
+#else
+#define	INT64_MAX	9223372036854775807LL
+#define	INT64_MIN	(-INT64_MAX-1)
+#define	UINT64_MAX	18446744073709551615ULL
+#endif	/* DB_WIN32 */
+
+#define	INT64_FMT	"%lld"
+#define	UINT64_FMT	"%llu"
+#endif	/* HAVE_64BIT_TYPES */
+
+/*
+ * Exit success/failure macros.
+ */
+#ifndef	HAVE_EXIT_SUCCESS
+#define	EXIT_FAILURE	1
+#define	EXIT_SUCCESS	0
+#endif
+
+/*
+ * File modes.
+ */
+#ifdef DB_WIN32
+#ifndef S_IREAD				/* WinCE doesn't have S_IREAD. */
+#define	S_IREAD		0
+#endif
+#ifndef S_IWRITE			/* WinCE doesn't have S_IWRITE. */
+#define	S_IWRITE	0
+#endif
+#ifndef	S_IRUSR
+#define	S_IRUSR		S_IREAD		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		S_IWRITE	/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0		/* X for other */
+#endif
+#else /* !DB_WIN32 */
+#ifndef	S_IRUSR
+#define	S_IRUSR		0000400		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		0000200		/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0000100		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0000040		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0000020		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0000010		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0000004		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0000002		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0000001		/* X for other */
+#endif
+#endif /* !DB_WIN32 */
+
+/*
+ * Don't step on the namespace.  Other libraries may have their own
+ * implementations of these functions, we don't want to use their
+ * implementations or force them to use ours based on the load order.
+ */
+#ifndef	HAVE_ATOI
+#define	atoi		__db_Catoi
+#endif
+#ifndef	HAVE_ATOL
+#define	atol		__db_Catol
+#endif
+#ifndef	HAVE_FCLOSE
+#define	fclose		__db_Cfclose
+#endif
+#ifndef	HAVE_FGETC
+#define	fgetc		__db_Cfgetc
+#endif
+#ifndef	HAVE_FGETS
+#define	fgets		__db_Cfgets
+#endif
+#ifndef	HAVE_FOPEN
+#define	fopen		__db_Cfopen
+#endif
+#ifndef	HAVE_FWRITE
+#define	fwrite		__db_Cfwrite
+#endif
+#ifndef	HAVE_GETADDRINFO
+#define	freeaddrinfo(a)		__db_Cfreeaddrinfo(a)
+#define	getaddrinfo(a, b, c, d)	__db_Cgetaddrinfo(a, b, c, d)
+#endif
+#ifndef	HAVE_GETCWD
+#define	getcwd		__db_Cgetcwd
+#endif
+#ifndef	HAVE_GETOPT
+#define	getopt		__db_Cgetopt
+#define	optarg		__db_Coptarg
+#define	opterr		__db_Copterr
+#define	optind		__db_Coptind
+#define	optopt		__db_Coptopt
+#define	optreset	__db_Coptreset
+#endif
+#ifndef	HAVE_ISALPHA
+#define	isalpha		__db_Cisalpha
+#endif
+#ifndef	HAVE_ISDIGIT
+#define	isdigit		__db_Cisdigit
+#endif
+#ifndef	HAVE_ISPRINT
+#define	isprint		__db_Cisprint
+#endif
+#ifndef	HAVE_ISSPACE
+#define	isspace		__db_Cisspace
+#endif
+#ifndef	HAVE_LOCALTIME
+#define	localtime	__db_Clocaltime
+#endif
+#ifndef	HAVE_MEMCMP
+#define	memcmp		__db_Cmemcmp
+#endif
+#ifndef	HAVE_MEMCPY
+#define	memcpy		__db_Cmemcpy
+#endif
+#ifndef	HAVE_MEMMOVE
+#define	memmove		__db_Cmemmove
+#endif
+#ifndef	HAVE_PRINTF
+#define	printf		__db_Cprintf
+#define	fprintf		__db_Cfprintf
+#endif
+#ifndef	HAVE_QSORT
+#define	qsort		__db_Cqsort
+#endif
+#ifndef	HAVE_RAISE
+#define	raise		__db_Craise
+#endif
+#ifndef	HAVE_RAND
+#define	rand		__db_Crand
+#define	srand		__db_Csrand
+#endif
+#ifndef	HAVE_SNPRINTF
+#define	snprintf	__db_Csnprintf
+#endif
+#ifndef	HAVE_STRCASECMP
+#define	strcasecmp	__db_Cstrcasecmp
+#define	strncasecmp	__db_Cstrncasecmp
+#endif
+#ifndef	HAVE_STRCAT
+#define	strcat		__db_Cstrcat
+#endif
+#ifndef	HAVE_STRCHR
+#define	strchr		__db_Cstrchr
+#endif
+#ifndef	HAVE_STRDUP
+#define	strdup		__db_Cstrdup
+#endif
+#ifndef	HAVE_STRERROR
+#define	strerror	__db_Cstrerror
+#endif
+#ifndef	HAVE_STRNCAT
+#define	strncat		__db_Cstrncat
+#endif
+#ifndef	HAVE_STRNCMP
+#define	strncmp		__db_Cstrncmp
+#endif
+#ifndef	HAVE_STRRCHR
+#define	strrchr		__db_Cstrrchr
+#endif
+#ifndef	HAVE_STRSEP
+#define	strsep		__db_Cstrsep
+#endif
+#ifndef	HAVE_STRTOL
+#define	strtol		__db_Cstrtol
+#endif
+#ifndef	HAVE_STRTOUL
+#define	strtoul		__db_Cstrtoul
+#endif
+#ifndef	HAVE_TIME
+#define	time		__db_Ctime
+#endif
+#ifndef	HAVE_VSNPRINTF
+#define	vsnprintf	__db_Cvsnprintf
+#endif

build_vxworks/db_archive/db_archive.c

@@ -0,0 +1,199 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_archive.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+int db_archive_main __P((int, char *[]));
+int db_archive_usage __P((void));
+int db_archive_version_check __P((void));
+
+const char *progname;
+
+int
+db_archive(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_archive", args, &argc, &argv);
+	return (db_archive_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_archive_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB_ENV	*dbenv;
+	u_int32_t flags;
+	int ch, exitval, ret, verbose;
+	char **file, *home, **list, *passwd;
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_archive_version_check()) != 0)
+		return (ret);
+
+	dbenv = NULL;
+	flags = 0;
+	exitval = verbose = 0;
+	home = passwd = NULL;
+	file = list = NULL;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "adh:lP:sVv")) != EOF)
+		switch (ch) {
+		case 'a':
+			LF_SET(DB_ARCH_ABS);
+			break;
+		case 'd':
+			LF_SET(DB_ARCH_REMOVE);
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'l':
+			LF_SET(DB_ARCH_LOG);
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 's':
+			LF_SET(DB_ARCH_DATA);
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case 'v':
+			/*
+			 * !!!
+			 * The verbose flag no longer actually does anything,
+			 * but it's left rather than adding it back at some
+			 * future date.
+			 */
+			verbose = 1;
+			break;
+		case '?':
+		default:
+			return (db_archive_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc != 0)
+		return (db_archive_usage());
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		goto shutdown;
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+
+	if (passwd != NULL && (ret = dbenv->set_encrypt(dbenv,
+	    passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto shutdown;
+	}
+	/*
+	 * If attaching to a pre-existing environment fails, create a
+	 * private one and try again.
+	 */
+	if ((ret = dbenv->open(dbenv, home, DB_USE_ENVIRON, 0)) != 0 &&
+	    (ret == DB_VERSION_MISMATCH ||
+	    (ret = dbenv->open(dbenv, home, DB_CREATE |
+	    DB_INIT_LOG | DB_PRIVATE | DB_USE_ENVIRON, 0)) != 0)) {
+		dbenv->err(dbenv, ret, "DB_ENV->open");
+		goto shutdown;
+	}
+
+	/* Get the list of names. */
+	if ((ret = dbenv->log_archive(dbenv, &list, flags)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->log_archive");
+		goto shutdown;
+	}
+
+	/* Print the list of names. */
+	if (list != NULL) {
+		for (file = list; *file != NULL; ++file)
+			printf("%s\n", *file);
+		free(list);
+	}
+
+	if (0) {
+shutdown:	exitval = 1;
+	}
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+int
+db_archive_usage()
+{
+	(void)fprintf(stderr,
+	    "usage: %s [-adlsVv] [-h home] [-P password]\n", progname);
+	return (EXIT_FAILURE);
+}
+
+int
+db_archive_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_archive/db_archive20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_archive20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_archive20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_archive20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_archive.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_archive.c_dependencies
+<END>
+
+<BEGIN> FILE_db_archive.c_objects
+db_archive.o
+<END>
+
+<BEGIN> FILE_db_archive.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_archive.c
+<END>
+
+<BEGIN> userComments
+db_archive
+<END>

build_vxworks/db_archive/db_archive22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_archive22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_archive22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_archive22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_archive22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_archive.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_archive.c_dependencies
+<END>
+
+<BEGIN> FILE_db_archive.c_objects
+db_archive.o
+<END>
+
+<BEGIN> FILE_db_archive.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_archive.c
+<END>
+
+<BEGIN> userComments
+db_archive
+<END>

build_vxworks/db_checkpoint/db_checkpoint.c

@@ -0,0 +1,245 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_checkpoint.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+int	 db_checkpoint_main __P((int, char *[]));
+int	 db_checkpoint_usage __P((void));
+int	 db_checkpoint_version_check __P((void));
+
+const char *progname;
+
+int
+db_checkpoint(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_checkpoint", args, &argc, &argv);
+	return (db_checkpoint_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_checkpoint_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB_ENV	*dbenv;
+	time_t now;
+	long argval;
+	u_int32_t flags, kbytes, minutes, seconds;
+	int ch, exitval, once, ret, verbose;
+	char *home, *logfile, *passwd, time_buf[CTIME_BUFLEN];
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_checkpoint_version_check()) != 0)
+		return (ret);
+
+	/*
+	 * !!!
+	 * Don't allow a fully unsigned 32-bit number, some compilers get
+	 * upset and require it to be specified in hexadecimal and so on.
+	 */
+#define	MAX_UINT32_T	2147483647
+
+	dbenv = NULL;
+	kbytes = minutes = 0;
+	exitval = once = verbose = 0;
+	flags = 0;
+	home = logfile = passwd = NULL;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "1h:k:L:P:p:Vv")) != EOF)
+		switch (ch) {
+		case '1':
+			once = 1;
+			flags = DB_FORCE;
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'k':
+			if (__db_getlong(NULL, progname,
+			    optarg, 1, (long)MAX_UINT32_T, &argval))
+				return (EXIT_FAILURE);
+			kbytes = (u_int32_t)argval;
+			break;
+		case 'L':
+			logfile = optarg;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 'p':
+			if (__db_getlong(NULL, progname,
+			    optarg, 1, (long)MAX_UINT32_T, &argval))
+				return (EXIT_FAILURE);
+			minutes = (u_int32_t)argval;
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case 'v':
+			verbose = 1;
+			break;
+		case '?':
+		default:
+			return (db_checkpoint_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc != 0)
+		return (db_checkpoint_usage());
+
+	if (once == 0 && kbytes == 0 && minutes == 0) {
+		(void)fprintf(stderr,
+		    "%s: at least one of -1, -k and -p must be specified\n",
+		    progname);
+		return (db_checkpoint_usage());
+	}
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/* Log our process ID. */
+	if (logfile != NULL && __db_util_logset(progname, logfile))
+		goto shutdown;
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		goto shutdown;
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+
+	if (passwd != NULL && (ret = dbenv->set_encrypt(dbenv,
+	    passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto shutdown;
+	}
+
+	/*
+	 * If attaching to a pre-existing environment fails, create a
+	 * private one and try again.
+	 */
+	if ((ret = dbenv->open(dbenv, home, DB_USE_ENVIRON, 0)) != 0 &&
+	    (!once || ret == DB_VERSION_MISMATCH ||
+	    (ret = dbenv->open(dbenv, home,
+	    DB_CREATE | DB_INIT_TXN | DB_PRIVATE | DB_USE_ENVIRON, 0)) != 0)) {
+		dbenv->err(dbenv, ret, "DB_ENV->open");
+		goto shutdown;
+	}
+
+	/*
+	 * If we have only a time delay, then we'll sleep the right amount
+	 * to wake up when a checkpoint is necessary.  If we have a "kbytes"
+	 * field set, then we'll check every 30 seconds.
+	 */
+	seconds = kbytes != 0 ? 30 : minutes * 60;
+	while (!__db_util_interrupted()) {
+		if (verbose) {
+			(void)time(&now);
+			dbenv->errx(dbenv,
+		    "checkpoint begin: %s", __os_ctime(&now, time_buf));
+		}
+
+		if ((ret = dbenv->txn_checkpoint(dbenv,
+		    kbytes, minutes, flags)) != 0) {
+			dbenv->err(dbenv, ret, "txn_checkpoint");
+			goto shutdown;
+		}
+
+		if (verbose) {
+			(void)time(&now);
+			dbenv->errx(dbenv,
+		    "checkpoint complete: %s", __os_ctime(&now, time_buf));
+		}
+
+		if (once)
+			break;
+
+		__os_yield(dbenv->env, seconds, 0);
+	}
+
+	if (0) {
+shutdown:	exitval = 1;
+	}
+
+	/* Clean up the logfile. */
+	if (logfile != NULL)
+		(void)remove(logfile);
+
+	/* Clean up the environment. */
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+int
+db_checkpoint_usage()
+{
+	(void)fprintf(stderr, "usage: %s [-1Vv]\n\t%s\n", progname,
+	    "[-h home] [-k kbytes] [-L file] [-P password] [-p min]");
+	return (EXIT_FAILURE);
+}
+
+int
+db_checkpoint_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_checkpoint/db_checkpoint20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_checkpoint20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_checkpoint20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_checkpoint20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_checkpoint.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_checkpoint.c_dependencies
+<END>
+
+<BEGIN> FILE_db_checkpoint.c_objects
+db_checkpoint.o
+<END>
+
+<BEGIN> FILE_db_checkpoint.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_checkpoint.c
+<END>
+
+<BEGIN> userComments
+db_checkpoint
+<END>

build_vxworks/db_checkpoint/db_checkpoint22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_checkpoint22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_checkpoint22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_checkpoint22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_checkpoint22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_checkpoint.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_checkpoint.c_dependencies
+<END>
+
+<BEGIN> FILE_db_checkpoint.c_objects
+db_checkpoint.o
+<END>
+
+<BEGIN> FILE_db_checkpoint.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_checkpoint.c
+<END>
+
+<BEGIN> userComments
+db_checkpoint
+<END>

build_vxworks/db_config.h

@@ -0,0 +1,581 @@
+/* DO NOT EDIT: automatically built by dist/s_vxworks. */
+/* !!!
+ * The CONFIG_TEST option may be added using the Tornado project build.
+ * DO NOT modify it here.
+ */
+/* Define to 1 if you want to build a version for running the test suite. */
+/* #undef CONFIG_TEST */
+
+/* We use DB_WIN32 much as one would use _WIN32 -- to specify that we're using
+   an operating system environment that supports Win32 calls and semantics. We
+   don't use _WIN32 because Cygwin/GCC also defines _WIN32, even though
+   Cygwin/GCC closely emulates the Unix environment. */
+/* #undef DB_WIN32 */
+
+/* !!!
+ * The DEBUG option may be added using the Tornado project build.
+ * DO NOT modify it here.
+ */
+/* Define to 1 if you want a debugging version. */
+/* #undef DEBUG */
+
+/* Define to 1 if you want a version that logs read operations. */
+/* #undef DEBUG_ROP */
+
+/* Define to 1 if you want a version that logs write operations. */
+/* #undef DEBUG_WOP */
+
+/* !!!
+ * The DIAGNOSTIC option may be added using the Tornado project build.
+ * DO NOT modify it here.
+ */
+/* Define to 1 if you want a version with run-time diagnostic checking. */
+/* #undef DIAGNOSTIC */
+
+/* Define to 1 if 64-bit types are available. */
+#define HAVE_64BIT_TYPES 1
+
+/* Define to 1 if you have the `abort' function. */
+#define HAVE_ABORT 1
+
+/* Define to 1 if you have the `atoi' function. */
+#define HAVE_ATOI 1
+
+/* Define to 1 if you have the `atol' function. */
+#define HAVE_ATOL 1
+
+/* Define to 1 if you have the `backtrace' function. */
+/* #undef HAVE_BACKTRACE */
+
+/* Define to 1 if you have the `backtrace_symbols' function. */
+/* #undef HAVE_BACKTRACE_SYMBOLS */
+
+/* Define to 1 if building BREW. */
+/* #undef HAVE_BREW */
+
+/* Define to 1 if building on BREW (SDK2). */
+/* #undef HAVE_BREW_SDK2 */
+
+/* Define to 1 if you have the `clock_gettime' function. */
+#define HAVE_CLOCK_GETTIME 1
+
+/* Define to 1 if clock_gettime supports CLOCK_MONOTONIC. */
+/* #undef HAVE_CLOCK_MONOTONIC */
+
+/* Define to 1 if Berkeley DB release includes strong cryptography. */
+#define HAVE_CRYPTO 1
+
+/* Define to 1 if you have the `ctime_r' function. */
+#define HAVE_CTIME_R 1
+
+/* Define to 1 if ctime_r takes a buffer length as a third argument. */
+#define HAVE_CTIME_R_3ARG 1
+
+/* Define to 1 if you have the `directio' function. */
+/* #undef HAVE_DIRECTIO */
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+/* #undef HAVE_DLFCN_H */
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+/* #undef HAVE_EXECINFO_H */
+
+/* Define to 1 if you have EXIT_SUCCESS/EXIT_FAILURE #defines. */
+#define HAVE_EXIT_SUCCESS 1
+
+/* Define to 1 if you have the `fchmod' function. */
+/* #undef HAVE_FCHMOD */
+
+/* Define to 1 if you have the `fclose' function. */
+#define HAVE_FCLOSE 1
+
+/* Define to 1 if you have the `fcntl' function. */
+/* #undef HAVE_FCNTL */
+
+/* Define to 1 if fcntl/F_SETFD denies child access to file descriptors. */
+/* #undef HAVE_FCNTL_F_SETFD */
+
+/* Define to 1 if you have the `fdatasync' function. */
+/* #undef HAVE_FDATASYNC */
+
+/* Define to 1 if you have the `fgetc' function. */
+#define HAVE_FGETC 1
+
+/* Define to 1 if you have the `fgets' function. */
+#define HAVE_FGETS 1
+
+/* Define to 1 if allocated filesystem blocks are not zeroed. */
+#define HAVE_FILESYSTEM_NOTZERO 1
+
+/* Define to 1 if you have the `fopen' function. */
+#define HAVE_FOPEN 1
+
+/* Define to 1 if you have the `ftruncate' function. */
+#define HAVE_FTRUNCATE 1
+
+/* Define to 1 if you have the `fwrite' function. */
+#define HAVE_FWRITE 1
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+/* #undef HAVE_GETADDRINFO */
+
+/* Define to 1 if you have the `getcwd' function. */
+#define HAVE_GETCWD 1
+
+/* Define to 1 if you have the `getenv' function. */
+#define HAVE_GETENV 1
+
+/* Define to 1 if you have the `getgid' function. */
+#define HAVE_GETGID 1
+
+/* Define to 1 if you have the `getopt' function. */
+/* #undef HAVE_GETOPT */
+
+/* Define to 1 if getopt supports the optreset variable. */
+/* #undef HAVE_GETOPT_OPTRESET */
+
+/* Define to 1 if you have the `getrusage' function. */
+/* #undef HAVE_GETRUSAGE */
+
+/* Define to 1 if you have the `gettimeofday' function. */
+/* #undef HAVE_GETTIMEOFDAY */
+
+/* Define to 1 if you have the `getuid' function. */
+/* #undef HAVE_GETUID */
+
+/* Define to 1 if building Hash access method. */
+#define HAVE_HASH 1
+
+/* Define to 1 if you have the `hstrerror' function. */
+/* #undef HAVE_HSTRERROR */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+/* #undef HAVE_INTTYPES_H */
+
+/* Define to 1 if you have the `isalpha' function. */
+#define HAVE_ISALPHA 1
+
+/* Define to 1 if you have the `isdigit' function. */
+#define HAVE_ISDIGIT 1
+
+/* Define to 1 if you have the `isprint' function. */
+#define HAVE_ISPRINT 1
+
+/* Define to 1 if you have the `isspace' function. */
+#define HAVE_ISSPACE 1
+
+/* Define to 1 if you have the `localtime' function. */
+#define HAVE_LOCALTIME 1
+
+/* Define to 1 if you have the `memcmp' function. */
+#define HAVE_MEMCMP 1
+
+/* Define to 1 if you have the `memcpy' function. */
+#define HAVE_MEMCPY 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `mlock' function. */
+/* #undef HAVE_MLOCK */
+
+/* Define to 1 if you have the `mmap' function. */
+/* #undef HAVE_MMAP */
+
+/* Define to 1 if you have the `mprotect' function. */
+/* #undef HAVE_MPROTECT */
+
+/* Define to 1 if you have the `munlock' function. */
+/* #undef HAVE_MUNLOCK */
+
+/* Define to 1 if you have the `munmap' function. */
+/* #undef HAVE_MUNMAP */
+
+/* Define to 1 to use the GCC compiler and 68K assembly language mutexes. */
+/* #undef HAVE_MUTEX_68K_GCC_ASSEMBLY */
+
+/* Define to 1 to use the AIX _check_lock mutexes. */
+/* #undef HAVE_MUTEX_AIX_CHECK_LOCK */
+
+/* Define to 1 to use the GCC compiler and Alpha assembly language mutexes. */
+/* #undef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and ARM assembly language mutexes. */
+/* #undef HAVE_MUTEX_ARM_GCC_ASSEMBLY */
+
+/* Define to 1 to use the Apple/Darwin _spin_lock_try mutexes. */
+/* #undef HAVE_MUTEX_DARWIN_SPIN_LOCK_TRY */
+
+/* Define to 1 to use the UNIX fcntl system call mutexes. */
+/* #undef HAVE_MUTEX_FCNTL */
+
+/* Define to 1 to use the GCC compiler and PaRisc assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_HPPA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on HP-UX. */
+/* #undef HAVE_MUTEX_HPPA_MSEM_INIT */
+
+/* Define to 1 to use test-and-set mutexes with blocking mutexes. */
+/* #undef HAVE_MUTEX_HYBRID */
+
+/* Define to 1 to use the GCC compiler and IA64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_IA64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and MIPS assembly language mutexes. */
+/* #undef HAVE_MUTEX_MIPS_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on systems other than HP-UX. */
+/* #undef HAVE_MUTEX_MSEM_INIT */
+
+/* Define to 1 to use the GCC compiler and PowerPC assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_PPC_GCC_ASSEMBLY */
+
+/* Define to 1 to use POSIX 1003.1 pthread_XXX mutexes. */
+/* #undef HAVE_MUTEX_PTHREADS */
+
+/* Define to 1 to use Reliant UNIX initspin mutexes. */
+/* #undef HAVE_MUTEX_RELIANTUNIX_INITSPIN */
+
+/* Define to 1 to use the IBM C compiler and S/390 assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_S390_CC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and S/390 assembly language mutexes. */
+/* #undef HAVE_MUTEX_S390_GCC_ASSEMBLY */
+
+/* Define to 1 to use the SCO compiler and x86 assembly language mutexes. */
+/* #undef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY */
+
+/* Define to 1 to use the obsolete POSIX 1003.1 sema_XXX mutexes. */
+/* #undef HAVE_MUTEX_SEMA_INIT */
+
+/* Define to 1 to use the SGI XXX_lock mutexes. */
+/* #undef HAVE_MUTEX_SGI_INIT_LOCK */
+
+/* Define to 1 to use the Solaris _lock_XXX mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LOCK_TRY */
+
+/* Define to 1 to use the Solaris lwp threads mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LWP */
+
+/* Define to 1 to use the GCC compiler and Sparc assembly language mutexes. */
+/* #undef HAVE_MUTEX_SPARC_GCC_ASSEMBLY */
+
+/* Define to 1 if the Berkeley DB library should support mutexes. */
+#define HAVE_MUTEX_SUPPORT 1
+
+/* Define to 1 if mutexes hold system resources. */
+#define HAVE_MUTEX_SYSTEM_RESOURCES 1
+
+/* Define to 1 to configure mutexes intra-process only. */
+/* #undef HAVE_MUTEX_THREAD_ONLY */
+
+/* Define to 1 to use the CC compiler and Tru64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_TRU64_CC_ASSEMBLY */
+
+/* Define to 1 to use the UNIX International mutexes. */
+/* #undef HAVE_MUTEX_UI_THREADS */
+
+/* Define to 1 to use the UTS compiler and assembly language mutexes. */
+/* #undef HAVE_MUTEX_UTS_CC_ASSEMBLY */
+
+/* Define to 1 to use VMS mutexes. */
+/* #undef HAVE_MUTEX_VMS */
+
+/* Define to 1 to use VxWorks mutexes. */
+#define HAVE_MUTEX_VXWORKS 1
+
+/* Define to 1 to use the MSVC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32 */
+
+/* Define to 1 to use the GCC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32_GCC */
+
+/* Define to 1 to use the GCC compiler and 64-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and 32-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_GCC_ASSEMBLY */
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the O_DIRECT flag. */
+/* #undef HAVE_O_DIRECT */
+
+/* Define to 1 if you have the `pread' function. */
+/* #undef HAVE_PREAD */
+
+/* Define to 1 if you have the `printf' function. */
+#define HAVE_PRINTF 1
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 to configure Berkeley DB for POSIX pthread API. */
+/* #undef HAVE_PTHREAD_API */
+
+/* Define to 1 if you have the `pthread_yield' function. */
+/* #undef HAVE_PTHREAD_YIELD */
+
+/* Define to 1 if you have the `pwrite' function. */
+/* #undef HAVE_PWRITE */
+
+/* Define to 1 if building on QNX. */
+/* #undef HAVE_QNX */
+
+/* Define to 1 if you have the `qsort' function. */
+#define HAVE_QSORT 1
+
+/* Define to 1 if building Queue access method. */
+#define HAVE_QUEUE 1
+
+/* Define to 1 if you have the `raise' function. */
+#define HAVE_RAISE 1
+
+/* Define to 1 if you have the `rand' function. */
+#define HAVE_RAND 1
+
+/* Define to 1 if building replication support. */
+#define HAVE_REPLICATION 1
+
+/* Define to 1 if building the Berkeley DB replication framework. */
+/* #undef HAVE_REPLICATION_THREADS */
+
+/* Define to 1 if building RPC client/server. */
+/* #undef HAVE_RPC */
+
+/* Define to 1 if building on S60. */
+/* #undef HAVE_S60 */
+
+/* Define to 1 if you have the `sched_yield' function. */
+#define HAVE_SCHED_YIELD 1
+
+/* Define to 1 if you have the `select' function. */
+#define HAVE_SELECT 1
+
+/* Define to 1 if you have the `setgid' function. */
+#define HAVE_SETGID 1
+
+/* Define to 1 if you have the `setuid' function. */
+#define HAVE_SETUID 1
+
+/* Define to 1 if shmctl/SHM_LOCK locks down shared memory segments. */
+/* #undef HAVE_SHMCTL_SHM_LOCK */
+
+/* Define to 1 if you have the `shmget' function. */
+/* #undef HAVE_SHMGET */
+
+/* Define to 1 if you have the `sigaction' function. */
+/* #undef HAVE_SIGACTION */
+
+/* Define to 1 if thread identifier type db_threadid_t is integral. */
+#define HAVE_SIMPLE_THREAD_TYPE 1
+
+/* Define to 1 if you have the `snprintf' function. */
+/* #undef HAVE_SNPRINTF */
+
+/* Define to 1 if you have the `stat' function. */
+#define HAVE_STAT 1
+
+/* Define to 1 if building statistics support. */
+#define HAVE_STATISTICS 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+/* #undef HAVE_STDINT_H */
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strcasecmp' function. */
+/* #undef HAVE_STRCASECMP */
+
+/* Define to 1 if you have the `strcat' function. */
+#define HAVE_STRCAT 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strdup' function. */
+/* #undef HAVE_STRDUP */
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the `strftime' function. */
+#define HAVE_STRFTIME 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strncat' function. */
+#define HAVE_STRNCAT 1
+
+/* Define to 1 if you have the `strncmp' function. */
+#define HAVE_STRNCMP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strsep' function. */
+/* #undef HAVE_STRSEP */
+
+/* Define to 1 if you have the `strtol' function. */
+#define HAVE_STRTOL 1
+
+/* Define to 1 if you have the `strtoul' function. */
+#define HAVE_STRTOUL 1
+
+/* Define to 1 if `st_blksize' is member of `struct stat'. */
+#define HAVE_STRUCT_STAT_ST_BLKSIZE 1
+
+/* Define to 1 if you have the `sysconf' function. */
+/* #undef HAVE_SYSCONF */
+
+/* Define to 1 if port includes files in the Berkeley DB source code. */
+#define HAVE_SYSTEM_INCLUDE_FILES 1
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+/* #undef HAVE_SYS_SELECT_H */
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+/* #undef HAVE_SYS_SOCKET_H */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+/* #undef HAVE_SYS_STAT_H */
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+/* #undef HAVE_SYS_TIME_H */
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+/* #undef HAVE_SYS_TYPES_H */
+
+/* Define to 1 if you have the `time' function. */
+#define HAVE_TIME 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if unlink of file with open file descriptors will fail. */
+#define HAVE_UNLINK_WITH_OPEN_FAILURE 1
+
+/* Define to 1 if port includes historic database upgrade support. */
+#define	HAVE_UPGRADE_SUPPORT 1
+
+/* Define to 1 if building access method verification support. */
+#define HAVE_VERIFY 1
+
+/* Define to 1 if you have the `vsnprintf' function. */
+/* #undef HAVE_VSNPRINTF */
+
+/* Define to 1 if building VxWorks. */
+#define HAVE_VXWORKS 1
+
+/* Define to 1 if you have the `yield' function. */
+/* #undef HAVE_YIELD */
+
+/* Define to 1 if you have the `_fstati64' function. */
+/* #undef HAVE__FSTATI64 */
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "Berkeley DB"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "Berkeley DB 4.7.25"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "db-4.7.25"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.7.25"
+
+/* The size of a `char', as computed by sizeof. */
+/* #undef SIZEOF_CHAR */
+
+/* The size of a `char *', as computed by sizeof. */
+/* #undef SIZEOF_CHAR_P */
+
+/* The size of a `int', as computed by sizeof. */
+/* #undef SIZEOF_INT */
+
+/* The size of a `long', as computed by sizeof. */
+/* #undef SIZEOF_LONG */
+
+/* The size of a `long long', as computed by sizeof. */
+/* #undef SIZEOF_LONG_LONG */
+
+/* The size of a `short', as computed by sizeof. */
+/* #undef SIZEOF_SHORT */
+
+/* The size of a `size_t', as computed by sizeof. */
+/* #undef SIZEOF_SIZE_T */
+
+/* The size of a `unsigned char', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_CHAR */
+
+/* The size of a `unsigned int', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_INT */
+
+/* The size of a `unsigned long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG */
+
+/* The size of a `unsigned long long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG_LONG */
+
+/* The size of a `unsigned short', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_SHORT */
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+/* #undef TIME_WITH_SYS_TIME */
+
+/* Define to 1 to mask harmless uninitialized memory read/writes. */
+/* #undef UMRW */
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#define inline
+#endif
+
+/* type to use in place of socklen_t if not defined */
+/* #undef socklen_t */

build_vxworks/db_config_small.h

@@ -0,0 +1,581 @@
+/* DO NOT EDIT: automatically built by dist/s_vxworks. */
+/* !!!
+ * The CONFIG_TEST option may be added using the Tornado project build.
+ * DO NOT modify it here.
+ */
+/* Define to 1 if you want to build a version for running the test suite. */
+/* #undef CONFIG_TEST */
+
+/* We use DB_WIN32 much as one would use _WIN32 -- to specify that we're using
+   an operating system environment that supports Win32 calls and semantics. We
+   don't use _WIN32 because Cygwin/GCC also defines _WIN32, even though
+   Cygwin/GCC closely emulates the Unix environment. */
+/* #undef DB_WIN32 */
+
+/* !!!
+ * The DEBUG option may be added using the Tornado project build.
+ * DO NOT modify it here.
+ */
+/* Define to 1 if you want a debugging version. */
+/* #undef DEBUG */
+
+/* Define to 1 if you want a version that logs read operations. */
+/* #undef DEBUG_ROP */
+
+/* Define to 1 if you want a version that logs write operations. */
+/* #undef DEBUG_WOP */
+
+/* !!!
+ * The DIAGNOSTIC option may be added using the Tornado project build.
+ * DO NOT modify it here.
+ */
+/* Define to 1 if you want a version with run-time diagnostic checking. */
+/* #undef DIAGNOSTIC */
+
+/* Define to 1 if 64-bit types are available. */
+#define HAVE_64BIT_TYPES 1
+
+/* Define to 1 if you have the `abort' function. */
+#define HAVE_ABORT 1
+
+/* Define to 1 if you have the `atoi' function. */
+#define HAVE_ATOI 1
+
+/* Define to 1 if you have the `atol' function. */
+#define HAVE_ATOL 1
+
+/* Define to 1 if you have the `backtrace' function. */
+/* #undef HAVE_BACKTRACE */
+
+/* Define to 1 if you have the `backtrace_symbols' function. */
+/* #undef HAVE_BACKTRACE_SYMBOLS */
+
+/* Define to 1 if building BREW. */
+/* #undef HAVE_BREW */
+
+/* Define to 1 if building on BREW (SDK2). */
+/* #undef HAVE_BREW_SDK2 */
+
+/* Define to 1 if you have the `clock_gettime' function. */
+#define HAVE_CLOCK_GETTIME 1
+
+/* Define to 1 if clock_gettime supports CLOCK_MONOTONIC. */
+/* #undef HAVE_CLOCK_MONOTONIC */
+
+/* Define to 1 if Berkeley DB release includes strong cryptography. */
+/* #undef HAVE_CRYPTO */
+
+/* Define to 1 if you have the `ctime_r' function. */
+#define HAVE_CTIME_R 1
+
+/* Define to 1 if ctime_r takes a buffer length as a third argument. */
+#define HAVE_CTIME_R_3ARG 1
+
+/* Define to 1 if you have the `directio' function. */
+/* #undef HAVE_DIRECTIO */
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+/* #undef HAVE_DLFCN_H */
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+/* #undef HAVE_EXECINFO_H */
+
+/* Define to 1 if you have EXIT_SUCCESS/EXIT_FAILURE #defines. */
+#define HAVE_EXIT_SUCCESS 1
+
+/* Define to 1 if you have the `fchmod' function. */
+/* #undef HAVE_FCHMOD */
+
+/* Define to 1 if you have the `fclose' function. */
+#define HAVE_FCLOSE 1
+
+/* Define to 1 if you have the `fcntl' function. */
+/* #undef HAVE_FCNTL */
+
+/* Define to 1 if fcntl/F_SETFD denies child access to file descriptors. */
+/* #undef HAVE_FCNTL_F_SETFD */
+
+/* Define to 1 if you have the `fdatasync' function. */
+/* #undef HAVE_FDATASYNC */
+
+/* Define to 1 if you have the `fgetc' function. */
+#define HAVE_FGETC 1
+
+/* Define to 1 if you have the `fgets' function. */
+#define HAVE_FGETS 1
+
+/* Define to 1 if allocated filesystem blocks are not zeroed. */
+#define HAVE_FILESYSTEM_NOTZERO 1
+
+/* Define to 1 if you have the `fopen' function. */
+#define HAVE_FOPEN 1
+
+/* Define to 1 if you have the `ftruncate' function. */
+#define HAVE_FTRUNCATE 1
+
+/* Define to 1 if you have the `fwrite' function. */
+#define HAVE_FWRITE 1
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+/* #undef HAVE_GETADDRINFO */
+
+/* Define to 1 if you have the `getcwd' function. */
+#define HAVE_GETCWD 1
+
+/* Define to 1 if you have the `getenv' function. */
+#define HAVE_GETENV 1
+
+/* Define to 1 if you have the `getgid' function. */
+#define HAVE_GETGID 1
+
+/* Define to 1 if you have the `getopt' function. */
+/* #undef HAVE_GETOPT */
+
+/* Define to 1 if getopt supports the optreset variable. */
+/* #undef HAVE_GETOPT_OPTRESET */
+
+/* Define to 1 if you have the `getrusage' function. */
+/* #undef HAVE_GETRUSAGE */
+
+/* Define to 1 if you have the `gettimeofday' function. */
+/* #undef HAVE_GETTIMEOFDAY */
+
+/* Define to 1 if you have the `getuid' function. */
+/* #undef HAVE_GETUID */
+
+/* Define to 1 if building Hash access method. */
+/* #undef HAVE_HASH */
+
+/* Define to 1 if you have the `hstrerror' function. */
+/* #undef HAVE_HSTRERROR */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+/* #undef HAVE_INTTYPES_H */
+
+/* Define to 1 if you have the `isalpha' function. */
+#define HAVE_ISALPHA 1
+
+/* Define to 1 if you have the `isdigit' function. */
+#define HAVE_ISDIGIT 1
+
+/* Define to 1 if you have the `isprint' function. */
+#define HAVE_ISPRINT 1
+
+/* Define to 1 if you have the `isspace' function. */
+#define HAVE_ISSPACE 1
+
+/* Define to 1 if you have the `localtime' function. */
+#define HAVE_LOCALTIME 1
+
+/* Define to 1 if you have the `memcmp' function. */
+#define HAVE_MEMCMP 1
+
+/* Define to 1 if you have the `memcpy' function. */
+#define HAVE_MEMCPY 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `mlock' function. */
+/* #undef HAVE_MLOCK */
+
+/* Define to 1 if you have the `mmap' function. */
+/* #undef HAVE_MMAP */
+
+/* Define to 1 if you have the `mprotect' function. */
+/* #undef HAVE_MPROTECT */
+
+/* Define to 1 if you have the `munlock' function. */
+/* #undef HAVE_MUNLOCK */
+
+/* Define to 1 if you have the `munmap' function. */
+/* #undef HAVE_MUNMAP */
+
+/* Define to 1 to use the GCC compiler and 68K assembly language mutexes. */
+/* #undef HAVE_MUTEX_68K_GCC_ASSEMBLY */
+
+/* Define to 1 to use the AIX _check_lock mutexes. */
+/* #undef HAVE_MUTEX_AIX_CHECK_LOCK */
+
+/* Define to 1 to use the GCC compiler and Alpha assembly language mutexes. */
+/* #undef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and ARM assembly language mutexes. */
+/* #undef HAVE_MUTEX_ARM_GCC_ASSEMBLY */
+
+/* Define to 1 to use the Apple/Darwin _spin_lock_try mutexes. */
+/* #undef HAVE_MUTEX_DARWIN_SPIN_LOCK_TRY */
+
+/* Define to 1 to use the UNIX fcntl system call mutexes. */
+/* #undef HAVE_MUTEX_FCNTL */
+
+/* Define to 1 to use the GCC compiler and PaRisc assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_HPPA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on HP-UX. */
+/* #undef HAVE_MUTEX_HPPA_MSEM_INIT */
+
+/* Define to 1 to use test-and-set mutexes with blocking mutexes. */
+/* #undef HAVE_MUTEX_HYBRID */
+
+/* Define to 1 to use the GCC compiler and IA64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_IA64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and MIPS assembly language mutexes. */
+/* #undef HAVE_MUTEX_MIPS_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on systems other than HP-UX. */
+/* #undef HAVE_MUTEX_MSEM_INIT */
+
+/* Define to 1 to use the GCC compiler and PowerPC assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_PPC_GCC_ASSEMBLY */
+
+/* Define to 1 to use POSIX 1003.1 pthread_XXX mutexes. */
+/* #undef HAVE_MUTEX_PTHREADS */
+
+/* Define to 1 to use Reliant UNIX initspin mutexes. */
+/* #undef HAVE_MUTEX_RELIANTUNIX_INITSPIN */
+
+/* Define to 1 to use the IBM C compiler and S/390 assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_S390_CC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and S/390 assembly language mutexes. */
+/* #undef HAVE_MUTEX_S390_GCC_ASSEMBLY */
+
+/* Define to 1 to use the SCO compiler and x86 assembly language mutexes. */
+/* #undef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY */
+
+/* Define to 1 to use the obsolete POSIX 1003.1 sema_XXX mutexes. */
+/* #undef HAVE_MUTEX_SEMA_INIT */
+
+/* Define to 1 to use the SGI XXX_lock mutexes. */
+/* #undef HAVE_MUTEX_SGI_INIT_LOCK */
+
+/* Define to 1 to use the Solaris _lock_XXX mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LOCK_TRY */
+
+/* Define to 1 to use the Solaris lwp threads mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LWP */
+
+/* Define to 1 to use the GCC compiler and Sparc assembly language mutexes. */
+/* #undef HAVE_MUTEX_SPARC_GCC_ASSEMBLY */
+
+/* Define to 1 if the Berkeley DB library should support mutexes. */
+#define HAVE_MUTEX_SUPPORT 1
+
+/* Define to 1 if mutexes hold system resources. */
+#define HAVE_MUTEX_SYSTEM_RESOURCES 1
+
+/* Define to 1 to configure mutexes intra-process only. */
+/* #undef HAVE_MUTEX_THREAD_ONLY */
+
+/* Define to 1 to use the CC compiler and Tru64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_TRU64_CC_ASSEMBLY */
+
+/* Define to 1 to use the UNIX International mutexes. */
+/* #undef HAVE_MUTEX_UI_THREADS */
+
+/* Define to 1 to use the UTS compiler and assembly language mutexes. */
+/* #undef HAVE_MUTEX_UTS_CC_ASSEMBLY */
+
+/* Define to 1 to use VMS mutexes. */
+/* #undef HAVE_MUTEX_VMS */
+
+/* Define to 1 to use VxWorks mutexes. */
+#define HAVE_MUTEX_VXWORKS 1
+
+/* Define to 1 to use the MSVC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32 */
+
+/* Define to 1 to use the GCC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32_GCC */
+
+/* Define to 1 to use the GCC compiler and 64-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and 32-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_GCC_ASSEMBLY */
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the O_DIRECT flag. */
+/* #undef HAVE_O_DIRECT */
+
+/* Define to 1 if you have the `pread' function. */
+/* #undef HAVE_PREAD */
+
+/* Define to 1 if you have the `printf' function. */
+#define HAVE_PRINTF 1
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 to configure Berkeley DB for POSIX pthread API. */
+/* #undef HAVE_PTHREAD_API */
+
+/* Define to 1 if you have the `pthread_yield' function. */
+/* #undef HAVE_PTHREAD_YIELD */
+
+/* Define to 1 if you have the `pwrite' function. */
+/* #undef HAVE_PWRITE */
+
+/* Define to 1 if building on QNX. */
+/* #undef HAVE_QNX */
+
+/* Define to 1 if you have the `qsort' function. */
+#define HAVE_QSORT 1
+
+/* Define to 1 if building Queue access method. */
+/* #undef HAVE_QUEUE */
+
+/* Define to 1 if you have the `raise' function. */
+#define HAVE_RAISE 1
+
+/* Define to 1 if you have the `rand' function. */
+#define HAVE_RAND 1
+
+/* Define to 1 if building replication support. */
+/* #undef HAVE_REPLICATION */
+
+/* Define to 1 if building the Berkeley DB replication framework. */
+/* #undef HAVE_REPLICATION_THREADS */
+
+/* Define to 1 if building RPC client/server. */
+/* #undef HAVE_RPC */
+
+/* Define to 1 if building on S60. */
+/* #undef HAVE_S60 */
+
+/* Define to 1 if you have the `sched_yield' function. */
+#define HAVE_SCHED_YIELD 1
+
+/* Define to 1 if you have the `select' function. */
+#define HAVE_SELECT 1
+
+/* Define to 1 if you have the `setgid' function. */
+#define HAVE_SETGID 1
+
+/* Define to 1 if you have the `setuid' function. */
+#define HAVE_SETUID 1
+
+/* Define to 1 if shmctl/SHM_LOCK locks down shared memory segments. */
+/* #undef HAVE_SHMCTL_SHM_LOCK */
+
+/* Define to 1 if you have the `shmget' function. */
+/* #undef HAVE_SHMGET */
+
+/* Define to 1 if you have the `sigaction' function. */
+/* #undef HAVE_SIGACTION */
+
+/* Define to 1 if thread identifier type db_threadid_t is integral. */
+#define HAVE_SIMPLE_THREAD_TYPE 1
+
+/* Define to 1 if you have the `snprintf' function. */
+/* #undef HAVE_SNPRINTF */
+
+/* Define to 1 if you have the `stat' function. */
+#define HAVE_STAT 1
+
+/* Define to 1 if building statistics support. */
+/* #undef HAVE_STATISTICS */
+
+/* Define to 1 if you have the <stdint.h> header file. */
+/* #undef HAVE_STDINT_H */
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strcasecmp' function. */
+/* #undef HAVE_STRCASECMP */
+
+/* Define to 1 if you have the `strcat' function. */
+#define HAVE_STRCAT 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strdup' function. */
+/* #undef HAVE_STRDUP */
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the `strftime' function. */
+#define HAVE_STRFTIME 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strncat' function. */
+#define HAVE_STRNCAT 1
+
+/* Define to 1 if you have the `strncmp' function. */
+#define HAVE_STRNCMP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strsep' function. */
+/* #undef HAVE_STRSEP */
+
+/* Define to 1 if you have the `strtol' function. */
+#define HAVE_STRTOL 1
+
+/* Define to 1 if you have the `strtoul' function. */
+#define HAVE_STRTOUL 1
+
+/* Define to 1 if `st_blksize' is member of `struct stat'. */
+#define HAVE_STRUCT_STAT_ST_BLKSIZE 1
+
+/* Define to 1 if you have the `sysconf' function. */
+/* #undef HAVE_SYSCONF */
+
+/* Define to 1 if port includes files in the Berkeley DB source code. */
+#define HAVE_SYSTEM_INCLUDE_FILES 1
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+/* #undef HAVE_SYS_SELECT_H */
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+/* #undef HAVE_SYS_SOCKET_H */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+/* #undef HAVE_SYS_STAT_H */
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+/* #undef HAVE_SYS_TIME_H */
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+/* #undef HAVE_SYS_TYPES_H */
+
+/* Define to 1 if you have the `time' function. */
+#define HAVE_TIME 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if unlink of file with open file descriptors will fail. */
+#define HAVE_UNLINK_WITH_OPEN_FAILURE 1
+
+/* Define to 1 if port includes historic database upgrade support. */
+#define	HAVE_UPGRADE_SUPPORT 1
+
+/* Define to 1 if building access method verification support. */
+/* #undef HAVE_VERIFY */
+
+/* Define to 1 if you have the `vsnprintf' function. */
+/* #undef HAVE_VSNPRINTF */
+
+/* Define to 1 if building VxWorks. */
+#define HAVE_VXWORKS 1
+
+/* Define to 1 if you have the `yield' function. */
+/* #undef HAVE_YIELD */
+
+/* Define to 1 if you have the `_fstati64' function. */
+/* #undef HAVE__FSTATI64 */
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "Berkeley DB"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "Berkeley DB 4.7.25"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "db-4.7.25"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.7.25"
+
+/* The size of a `char', as computed by sizeof. */
+/* #undef SIZEOF_CHAR */
+
+/* The size of a `char *', as computed by sizeof. */
+/* #undef SIZEOF_CHAR_P */
+
+/* The size of a `int', as computed by sizeof. */
+/* #undef SIZEOF_INT */
+
+/* The size of a `long', as computed by sizeof. */
+/* #undef SIZEOF_LONG */
+
+/* The size of a `long long', as computed by sizeof. */
+/* #undef SIZEOF_LONG_LONG */
+
+/* The size of a `short', as computed by sizeof. */
+/* #undef SIZEOF_SHORT */
+
+/* The size of a `size_t', as computed by sizeof. */
+/* #undef SIZEOF_SIZE_T */
+
+/* The size of a `unsigned char', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_CHAR */
+
+/* The size of a `unsigned int', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_INT */
+
+/* The size of a `unsigned long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG */
+
+/* The size of a `unsigned long long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG_LONG */
+
+/* The size of a `unsigned short', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_SHORT */
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+/* #undef TIME_WITH_SYS_TIME */
+
+/* Define to 1 to mask harmless uninitialized memory read/writes. */
+/* #undef UMRW */
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#define inline
+#endif
+
+/* type to use in place of socklen_t if not defined */
+/* #undef socklen_t */

build_vxworks/db_deadlock/db_deadlock.c

@@ -0,0 +1,249 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_deadlock.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+int db_deadlock_main __P((int, char *[]));
+int db_deadlock_usage __P((void));
+int db_deadlock_version_check __P((void));
+
+const char *progname;
+
+int
+db_deadlock(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_deadlock", args, &argc, &argv);
+	return (db_deadlock_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_deadlock_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB_ENV *dbenv;
+	u_int32_t atype;
+	time_t now;
+	u_long secs, usecs;
+	int rejected, ch, exitval, ret, verbose;
+	char *home, *logfile, *passwd, *str, time_buf[CTIME_BUFLEN];
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_deadlock_version_check()) != 0)
+		return (ret);
+
+	dbenv = NULL;
+	atype = DB_LOCK_DEFAULT;
+	home = logfile = passwd = NULL;
+	secs = usecs = 0;
+	exitval = verbose = 0;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "a:h:L:P:t:Vv")) != EOF)
+		switch (ch) {
+		case 'a':
+			switch (optarg[0]) {
+			case 'e':
+				atype = DB_LOCK_EXPIRE;
+				break;
+			case 'm':
+				atype = DB_LOCK_MAXLOCKS;
+				break;
+			case 'n':
+				atype = DB_LOCK_MINLOCKS;
+				break;
+			case 'o':
+				atype = DB_LOCK_OLDEST;
+				break;
+			case 'W':
+				atype = DB_LOCK_MAXWRITE;
+				break;
+			case 'w':
+				atype = DB_LOCK_MINWRITE;
+				break;
+			case 'y':
+				atype = DB_LOCK_YOUNGEST;
+				break;
+			default:
+				return (db_deadlock_usage());
+				/* NOTREACHED */
+			}
+			if (optarg[1] != '\0')
+				return (db_deadlock_usage());
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'L':
+			logfile = optarg;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 't':
+			if ((str = strchr(optarg, '.')) != NULL) {
+				*str++ = '\0';
+				if (*str != '\0' && __db_getulong(
+				    NULL, progname, str, 0, LONG_MAX, &usecs))
+					return (EXIT_FAILURE);
+			}
+			if (*optarg != '\0' && __db_getulong(
+			    NULL, progname, optarg, 0, LONG_MAX, &secs))
+				return (EXIT_FAILURE);
+			if (secs == 0 && usecs == 0)
+				return (db_deadlock_usage());
+
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case 'v':
+			verbose = 1;
+			break;
+		case '?':
+		default:
+			return (db_deadlock_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc != 0)
+		return (db_deadlock_usage());
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/* Log our process ID. */
+	if (logfile != NULL && __db_util_logset(progname, logfile))
+		goto shutdown;
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		goto shutdown;
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+
+	if (passwd != NULL && (ret = dbenv->set_encrypt(dbenv,
+	    passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto shutdown;
+	}
+
+	if (verbose) {
+		(void)dbenv->set_verbose(dbenv, DB_VERB_DEADLOCK, 1);
+		(void)dbenv->set_verbose(dbenv, DB_VERB_WAITSFOR, 1);
+	}
+
+	/* An environment is required. */
+	if ((ret = dbenv->open(dbenv, home, DB_USE_ENVIRON, 0)) != 0) {
+		dbenv->err(dbenv, ret, "open");
+		goto shutdown;
+	}
+
+	while (!__db_util_interrupted()) {
+		if (verbose) {
+			(void)time(&now);
+			dbenv->errx(dbenv,
+			    "running at %.24s", __os_ctime(&now, time_buf));
+		}
+
+		if ((ret =
+		    dbenv->lock_detect(dbenv, 0, atype, &rejected)) != 0) {
+			dbenv->err(dbenv, ret, "DB_ENV->lock_detect");
+			goto shutdown;
+		}
+		if (verbose)
+			dbenv->errx(dbenv, "rejected %d locks", rejected);
+
+		/* Make a pass every "secs" secs and "usecs" usecs. */
+		if (secs == 0 && usecs == 0)
+			break;
+		__os_yield(dbenv->env, secs, usecs);
+	}
+
+	if (0) {
+shutdown:	exitval = 1;
+	}
+
+	/* Clean up the logfile. */
+	if (logfile != NULL)
+		(void)remove(logfile);
+
+	/* Clean up the environment. */
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+int
+db_deadlock_usage()
+{
+	(void)fprintf(stderr,
+	    "usage: %s [-Vv] [-a e | m | n | o | W | w | y]\n\t%s\n", progname,
+	    "[-h home] [-L file] [-P password] [-t sec.usec]");
+	return (EXIT_FAILURE);
+}
+
+int
+db_deadlock_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_deadlock/db_deadlock20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_deadlock20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_deadlock20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_deadlock20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_deadlock.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_deadlock.c_dependencies
+<END>
+
+<BEGIN> FILE_db_deadlock.c_objects
+db_deadlock.o
+<END>
+
+<BEGIN> FILE_db_deadlock.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_deadlock.c
+<END>
+
+<BEGIN> userComments
+db_deadlock
+<END>

build_vxworks/db_deadlock/db_deadlock22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_deadlock22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_deadlock22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_deadlock22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_deadlock22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_deadlock.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_deadlock.c_dependencies
+<END>
+
+<BEGIN> FILE_db_deadlock.c_objects
+db_deadlock.o
+<END>
+
+<BEGIN> FILE_db_deadlock.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_deadlock.c
+<END>
+
+<BEGIN> userComments
+db_deadlock
+<END>

build_vxworks/db_dump/db_dump.c

@@ -0,0 +1,481 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_dump.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/db_am.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+int	 db_dump_db_init __P((DB_ENV *, char *, int, u_int32_t, int *));
+int	 db_dump_dump_sub __P((DB_ENV *, DB *, char *, int, int));
+int	 db_dump_main __P((int, char *[]));
+int	 db_dump_show_subs __P((DB *));
+int	 db_dump_usage __P((void));
+int	 db_dump_version_check __P((void));
+
+const char *progname;
+
+int
+db_dump(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_dump", args, &argc, &argv);
+	return (db_dump_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_dump_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB_ENV	*dbenv;
+	DB *dbp;
+	u_int32_t cache;
+	int ch;
+	int exitval, keyflag, lflag, nflag, pflag, private;
+	int ret, Rflag, rflag, resize;
+	char *dopt, *home, *passwd, *subname;
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_dump_version_check()) != 0)
+		return (ret);
+
+	dbenv = NULL;
+	dbp = NULL;
+	exitval = lflag = nflag = pflag = rflag = Rflag = 0;
+	keyflag = 0;
+	cache = MEGABYTE;
+	private = 0;
+	dopt = home = passwd = subname = NULL;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "d:f:h:klNpP:rRs:V")) != EOF)
+		switch (ch) {
+		case 'd':
+			dopt = optarg;
+			break;
+		case 'f':
+			if (freopen(optarg, "w", stdout) == NULL) {
+				fprintf(stderr, "%s: %s: reopen: %s\n",
+				    progname, optarg, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'k':
+			keyflag = 1;
+			break;
+		case 'l':
+			lflag = 1;
+			break;
+		case 'N':
+			nflag = 1;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 'p':
+			pflag = 1;
+			break;
+		case 's':
+			subname = optarg;
+			break;
+		case 'R':
+			Rflag = 1;
+			/* DB_AGGRESSIVE requires DB_SALVAGE */
+			/* FALLTHROUGH */
+		case 'r':
+			rflag = 1;
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case '?':
+		default:
+			return (db_dump_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc != 1)
+		return (db_dump_usage());
+
+	if (dopt != NULL && pflag) {
+		fprintf(stderr,
+		    "%s: the -d and -p options may not both be specified\n",
+		    progname);
+		return (EXIT_FAILURE);
+	}
+	if (lflag && subname != NULL) {
+		fprintf(stderr,
+		    "%s: the -l and -s options may not both be specified\n",
+		    progname);
+		return (EXIT_FAILURE);
+	}
+
+	if (keyflag && rflag) {
+		fprintf(stderr, "%s: %s",
+		    "the -k and -r or -R options may not both be specified\n",
+		    progname);
+		return (EXIT_FAILURE);
+	}
+
+	if (subname != NULL && rflag) {
+		fprintf(stderr, "%s: %s",
+		    "the -s and -r or R options may not both be specified\n",
+		    progname);
+		return (EXIT_FAILURE);
+	}
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+retry:	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		goto err;
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+	if (nflag) {
+		if ((ret = dbenv->set_flags(dbenv, DB_NOLOCKING, 1)) != 0) {
+			dbenv->err(dbenv, ret, "set_flags: DB_NOLOCKING");
+			goto err;
+		}
+		if ((ret = dbenv->set_flags(dbenv, DB_NOPANIC, 1)) != 0) {
+			dbenv->err(dbenv, ret, "set_flags: DB_NOPANIC");
+			goto err;
+		}
+	}
+	if (passwd != NULL && (ret = dbenv->set_encrypt(dbenv,
+	    passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto err;
+	}
+
+	/* Initialize the environment. */
+	if (db_dump_db_init(dbenv, home, rflag, cache, &private) != 0)
+		goto err;
+
+	/* Create the DB object and open the file. */
+	if ((ret = db_create(&dbp, dbenv, 0)) != 0) {
+		dbenv->err(dbenv, ret, "db_create");
+		goto err;
+	}
+
+	/*
+	 * If we're salvaging, don't do an open;  it might not be safe.
+	 * Dispatch now into the salvager.
+	 */
+	if (rflag) {
+		/* The verify method is a destructor. */
+		ret = dbp->verify(dbp, argv[0], NULL, stdout,
+		    DB_SALVAGE |
+		    (Rflag ? DB_AGGRESSIVE : 0) |
+		    (pflag ? DB_PRINTABLE : 0));
+		dbp = NULL;
+		if (ret != 0)
+			goto err;
+		goto done;
+	}
+
+	if ((ret = dbp->open(dbp, NULL,
+	    argv[0], subname, DB_UNKNOWN, DB_RDONLY, 0)) != 0) {
+		dbp->err(dbp, ret, "open: %s", argv[0]);
+		goto err;
+	}
+	if (private != 0) {
+		if ((ret = __db_util_cache(dbp, &cache, &resize)) != 0)
+			goto err;
+		if (resize) {
+			(void)dbp->close(dbp, 0);
+			dbp = NULL;
+
+			(void)dbenv->close(dbenv, 0);
+			dbenv = NULL;
+			goto retry;
+		}
+	}
+
+	if (dopt != NULL) {
+		if ((ret = __db_dumptree(dbp, NULL, dopt, NULL)) != 0) {
+			dbp->err(dbp, ret, "__db_dumptree: %s", argv[0]);
+			goto err;
+		}
+	} else if (lflag) {
+		if (dbp->get_multiple(dbp)) {
+			if (db_dump_show_subs(dbp))
+				goto err;
+		} else {
+			dbp->errx(dbp,
+			    "%s: does not contain multiple databases", argv[0]);
+			goto err;
+		}
+	} else {
+		if (subname == NULL && dbp->get_multiple(dbp)) {
+			if (db_dump_dump_sub(dbenv, dbp, argv[0], pflag, keyflag))
+				goto err;
+		} else
+			if (dbp->dump(dbp, NULL,
+			    __db_pr_callback, stdout, pflag, keyflag))
+				goto err;
+	}
+
+	if (0) {
+err:		exitval = 1;
+	}
+done:	if (dbp != NULL && (ret = dbp->close(dbp, 0)) != 0) {
+		exitval = 1;
+		dbenv->err(dbenv, ret, "close");
+	}
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+/*
+ * db_init --
+ *	Initialize the environment.
+ */
+int
+db_dump_db_init(dbenv, home, is_salvage, cache, is_privatep)
+	DB_ENV *dbenv;
+	char *home;
+	int is_salvage;
+	u_int32_t cache;
+	int *is_privatep;
+{
+	int ret;
+
+	/*
+	 * Try and use the underlying environment when opening a database.
+	 * We wish to use the buffer pool so our information is as up-to-date
+	 * as possible, even if the mpool cache hasn't been flushed.
+	 *
+	 * If we are not doing a salvage, we want to join the environment;
+	 * if a locking system is present, this will let us use it and be
+	 * safe to run concurrently with other threads of control.  (We never
+	 * need to use transactions explicitly, as we're read-only.)  Note
+	 * that in CDB, too, this will configure our environment
+	 * appropriately, and our cursors will (correctly) do locking as CDB
+	 * read cursors.
+	 *
+	 * If we are doing a salvage, the verification code will protest
+	 * if we initialize transactions, logging, or locking;  do an
+	 * explicit DB_INIT_MPOOL to try to join any existing environment
+	 * before we create our own.
+	 */
+	*is_privatep = 0;
+	if ((ret = dbenv->open(dbenv, home,
+	    DB_USE_ENVIRON | (is_salvage ? DB_INIT_MPOOL : 0), 0)) == 0)
+		return (0);
+	if (ret == DB_VERSION_MISMATCH)
+		goto err;
+
+	/*
+	 * An environment is required because we may be trying to look at
+	 * databases in directories other than the current one.  We could
+	 * avoid using an environment iff the -h option wasn't specified,
+	 * but that seems like more work than it's worth.
+	 *
+	 * No environment exists (or, at least no environment that includes
+	 * an mpool region exists).  Create one, but make it private so that
+	 * no files are actually created.
+	 */
+	*is_privatep = 1;
+	if ((ret = dbenv->set_cachesize(dbenv, 0, cache, 1)) == 0 &&
+	    (ret = dbenv->open(dbenv, home,
+	    DB_CREATE | DB_INIT_MPOOL | DB_PRIVATE | DB_USE_ENVIRON, 0)) == 0)
+		return (0);
+
+	/* An environment is required. */
+err:	dbenv->err(dbenv, ret, "DB_ENV->open");
+	return (1);
+}
+
+/*
+ * dump_sub --
+ *	Dump out the records for a DB containing subdatabases.
+ */
+int
+db_dump_dump_sub(dbenv, parent_dbp, parent_name, pflag, keyflag)
+	DB_ENV *dbenv;
+	DB *parent_dbp;
+	char *parent_name;
+	int pflag, keyflag;
+{
+	DB *dbp;
+	DBC *dbcp;
+	DBT key, data;
+	int ret;
+	char *subdb;
+
+	/*
+	 * Get a cursor and step through the database, dumping out each
+	 * subdatabase.
+	 */
+	if ((ret = parent_dbp->cursor(parent_dbp, NULL, &dbcp, 0)) != 0) {
+		dbenv->err(dbenv, ret, "DB->cursor");
+		return (1);
+	}
+
+	memset(&key, 0, sizeof(key));
+	memset(&data, 0, sizeof(data));
+	while ((ret = dbcp->get(dbcp, &key, &data,
+	    DB_IGNORE_LEASE | DB_NEXT)) == 0) {
+		/* Nul terminate the subdatabase name. */
+		if ((subdb = malloc(key.size + 1)) == NULL) {
+			dbenv->err(dbenv, ENOMEM, NULL);
+			return (1);
+		}
+		memcpy(subdb, key.data, key.size);
+		subdb[key.size] = '\0';
+
+		/* Create the DB object and open the file. */
+		if ((ret = db_create(&dbp, dbenv, 0)) != 0) {
+			dbenv->err(dbenv, ret, "db_create");
+			free(subdb);
+			return (1);
+		}
+		if ((ret = dbp->open(dbp, NULL,
+		    parent_name, subdb, DB_UNKNOWN, DB_RDONLY, 0)) != 0)
+			dbp->err(dbp, ret,
+			    "DB->open: %s:%s", parent_name, subdb);
+		if (ret == 0 && dbp->dump(
+		    dbp, subdb, __db_pr_callback, stdout, pflag, keyflag))
+			ret = 1;
+		(void)dbp->close(dbp, 0);
+		free(subdb);
+		if (ret != 0)
+			return (1);
+	}
+	if (ret != DB_NOTFOUND) {
+		parent_dbp->err(parent_dbp, ret, "DBcursor->get");
+		return (1);
+	}
+
+	if ((ret = dbcp->close(dbcp)) != 0) {
+		parent_dbp->err(parent_dbp, ret, "DBcursor->close");
+		return (1);
+	}
+
+	return (0);
+}
+
+/*
+ * show_subs --
+ *	Display the subdatabases for a database.
+ */
+int
+db_dump_show_subs(dbp)
+	DB *dbp;
+{
+	DBC *dbcp;
+	DBT key, data;
+	int ret;
+
+	/*
+	 * Get a cursor and step through the database, printing out the key
+	 * of each key/data pair.
+	 */
+	if ((ret = dbp->cursor(dbp, NULL, &dbcp, 0)) != 0) {
+		dbp->err(dbp, ret, "DB->cursor");
+		return (1);
+	}
+
+	memset(&key, 0, sizeof(key));
+	memset(&data, 0, sizeof(data));
+	while ((ret = dbcp->get(dbcp, &key, &data,
+	    DB_IGNORE_LEASE | DB_NEXT)) == 0) {
+		if ((ret = dbp->dbenv->prdbt(
+		    &key, 1, NULL, stdout, __db_pr_callback, 0)) != 0) {
+			dbp->errx(dbp, NULL);
+			return (1);
+		}
+	}
+	if (ret != DB_NOTFOUND) {
+		dbp->err(dbp, ret, "DBcursor->get");
+		return (1);
+	}
+
+	if ((ret = dbcp->close(dbcp)) != 0) {
+		dbp->err(dbp, ret, "DBcursor->close");
+		return (1);
+	}
+	return (0);
+}
+
+/*
+ * usage --
+ *	Display the usage message.
+ */
+int
+db_dump_usage()
+{
+	(void)fprintf(stderr, "usage: %s [-klNprRV]\n\t%s\n",
+	    progname,
+    "[-d ahr] [-f output] [-h home] [-P password] [-s database] db_file");
+	return (EXIT_FAILURE);
+}
+
+int
+db_dump_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_dump/db_dump20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_dump20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_dump20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_dump20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_dump.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_dump.c_dependencies
+<END>
+
+<BEGIN> FILE_db_dump.c_objects
+db_dump.o
+<END>
+
+<BEGIN> FILE_db_dump.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_dump.c
+<END>
+
+<BEGIN> userComments
+db_dump
+<END>

build_vxworks/db_dump/db_dump22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_dump22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_dump22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_dump22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_dump22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_dump.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_dump.c_dependencies
+<END>
+
+<BEGIN> FILE_db_dump.c_objects
+db_dump.o
+<END>
+
+<BEGIN> FILE_db_dump.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_dump.c
+<END>
+
+<BEGIN> userComments
+db_dump
+<END>

build_vxworks/db_hotbackup/db_hotbackup.c

@@ -0,0 +1,879 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_hotbackup.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/log.h"
+#include "dbinc/db_page.h"
+#include "dbinc/qam.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+enum which_open { OPEN_ORIGINAL, OPEN_HOT_BACKUP };
+
+int db_hotbackup_backup_dir_clean __P((DB_ENV *, char *, char *, int *, int, int));
+int db_hotbackup_data_copy __P((DB_ENV *, char *, char *, char *, int));
+int db_hotbackup_env_init __P((DB_ENV **,
+     char *, char **, char ***, char *, enum which_open));
+int db_hotbackup_main __P((int, char *[]));
+int db_hotbackup_read_data_dir __P((DB_ENV *, char *, char *, char *, int, int));
+int db_hotbackup_read_log_dir __P((DB_ENV *, char *, char *, char *, int *, int, int));
+int db_hotbackup_usage __P((void));
+int db_hotbackup_version_check __P((void));
+
+const char *progname;
+
+int
+db_hotbackup(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_hotbackup", args, &argc, &argv);
+	return (db_hotbackup_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_hotbackup_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	time_t now;
+	DB_ENV *dbenv;
+	u_int data_cnt, data_next;
+	int ch, checkpoint, copy_min, db_config, exitval;
+	int remove_max, ret, update, verbose;
+	char *backup_dir, **data_dir, **dir, *home, *log_dir, *passwd;
+	char home_buf[DB_MAXPATHLEN], time_buf[CTIME_BUFLEN];
+
+	/*
+	 * Make sure all verbose message are output before any error messages
+	 * in the case where the output is being logged into a file.  This
+	 * call has to be done before any operation is performed on the stream.
+	 *
+	 * Use unbuffered I/O because line-buffered I/O requires a buffer, and
+	 * some operating systems have buffer alignment and size constraints we
+	 * don't want to care about.  There isn't enough output for the calls
+	 * to matter.
+	 */
+	setbuf(stdout, NULL);
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_hotbackup_version_check()) != 0)
+		return (ret);
+
+	checkpoint = db_config = data_cnt =
+	    data_next = exitval = update = verbose = 0;
+	data_dir = NULL;
+	backup_dir = home = passwd = NULL;
+	log_dir = NULL;
+	copy_min = remove_max = 0;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "b:cDd:h:l:P:uVv")) != EOF)
+		switch (ch) {
+		case 'b':
+			backup_dir = optarg;
+			break;
+		case 'c':
+			checkpoint = 1;
+			break;
+		case 'D':
+			db_config = 1;
+			break;
+		case 'd':
+			/*
+			 * User can specify a list of directories -- keep an
+			 * array, leaving room for the trailing NULL.
+			 */
+			if (data_dir == NULL || data_next >= data_cnt - 2) {
+				data_cnt = data_cnt == 0 ? 20 : data_cnt * 2;
+				if ((data_dir = realloc(data_dir,
+				    data_cnt * sizeof(*data_dir))) == NULL) {
+					fprintf(stderr, "%s: %s\n",
+					    progname, strerror(errno));
+					return (EXIT_FAILURE);
+				}
+			}
+			data_dir[data_next++] = optarg;
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'l':
+			log_dir = optarg;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 'u':
+			update = 1;
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case 'v':
+			verbose = 1;
+			break;
+		case '?':
+		default:
+			return (db_hotbackup_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc != 0)
+		return (db_hotbackup_usage());
+
+	/* NULL-terminate any list of data directories. */
+	if (data_dir != NULL) {
+		data_dir[data_next] = NULL;
+		/*
+		 * -d is relative to the current directory, to run a checkpoint
+		 * we must have directories relative to the environment.
+		 */
+		if (checkpoint == 1) {
+			fprintf(stderr,
+				"%s: cannot specify -d and -c\n", progname);
+			return (db_hotbackup_usage());
+		}
+	}
+
+	if (db_config && (data_dir != NULL || log_dir != NULL)) {
+		fprintf(stderr,
+		     "%s: cannot specify -D and -d or -l\n", progname);
+		return (db_hotbackup_usage());
+	}
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/*
+	 * The home directory defaults to the environment variable DB_HOME.
+	 * The log directory defaults to the home directory.
+	 *
+	 * We require a source database environment directory and a target
+	 * backup directory.
+	 */
+	if (home == NULL) {
+		home = home_buf;
+		if ((ret = __os_getenv(
+		    NULL, "DB_HOME", &home, sizeof(home_buf))) != 0) {
+			fprintf(stderr,
+		    "%s failed to get environment variable DB_HOME: %s\n",
+			    progname, db_strerror(ret));
+			return (EXIT_FAILURE);
+		}
+		/*
+		 * home set to NULL if __os_getenv failed to find DB_HOME.
+		 */
+	}
+	if (home == NULL) {
+		fprintf(stderr,
+		    "%s: no source database environment specified\n", progname);
+		return (db_hotbackup_usage());
+	}
+	if (backup_dir == NULL) {
+		fprintf(stderr,
+		    "%s: no target backup directory specified\n", progname);
+		return (db_hotbackup_usage());
+	}
+
+	if (verbose) {
+		(void)time(&now);
+		printf("%s: hot backup started at %s",
+		    progname, __os_ctime(&now, time_buf));
+	}
+
+	/* Open the source environment. */
+	if (db_hotbackup_env_init(&dbenv, home,
+	     (db_config || log_dir != NULL) ? &log_dir : NULL,
+	     db_config ? &data_dir : NULL,
+	     passwd, OPEN_ORIGINAL) != 0)
+		goto shutdown;
+
+	if (db_config && __os_abspath(log_dir)) {
+		fprintf(stderr,
+	"%s: DB_CONFIG must not contain an absolute path for the log directory",
+		    progname);
+		goto shutdown;
+	}
+
+	/*
+	 * If the -c option is specified, checkpoint the source home
+	 * database environment, and remove any unnecessary log files.
+	 */
+	if (checkpoint) {
+		if (verbose)
+			printf("%s: %s: force checkpoint\n", progname, home);
+		if ((ret =
+		    dbenv->txn_checkpoint(dbenv, 0, 0, DB_FORCE)) != 0) {
+			dbenv->err(dbenv, ret, "DB_ENV->txn_checkpoint");
+			goto shutdown;
+		}
+		if (!update) {
+			if (verbose)
+				printf("%s: %s: remove unnecessary log files\n",
+				    progname, home);
+			if ((ret = dbenv->log_archive(dbenv,
+			     NULL, DB_ARCH_REMOVE)) != 0) {
+				dbenv->err(dbenv, ret, "DB_ENV->log_archive");
+				goto shutdown;
+			}
+		}
+	}
+
+	/*
+	 * If the target directory for the backup does not exist, create it
+	 * with mode read-write-execute for the owner.  Ignore errors here,
+	 * it's simpler and more portable to just always try the create.  If
+	 * there's a problem, we'll fail with reasonable errors later.
+	 */
+	(void)__os_mkdir(NULL, backup_dir, DB_MODE_700);
+
+	/*
+	 * If -u was specified, remove all log files; if -u was not specified,
+	 * remove all files.
+	 *
+	 * Potentially there are two directories to clean, the log directory
+	 * and the target directory.  First, clean up the log directory if
+	 * it's different from the target directory, then clean up the target
+	 * directory.
+	 */
+	if (db_config && log_dir != NULL &&
+	    db_hotbackup_backup_dir_clean(
+	    dbenv, backup_dir, log_dir, &remove_max, update, verbose) != 0)
+		goto shutdown;
+	if (db_hotbackup_backup_dir_clean(dbenv,
+	    backup_dir, NULL, &remove_max, update, verbose) != 0)
+		goto shutdown;
+
+	/*
+	 * If the -u option was not specified, copy all database files found in
+	 * the database environment home directory, or any directory specified
+	 * using the -d option, into the target directory for the backup.
+	 */
+	if (!update) {
+		if (db_hotbackup_read_data_dir(dbenv, home,
+		     backup_dir, home, verbose, db_config) != 0)
+			goto shutdown;
+		if (data_dir != NULL)
+			for (dir = data_dir; *dir != NULL; ++dir) {
+				/*
+				 * Don't allow absolute path names taken from
+				 * the DB_CONFIG file -- running recovery with
+				 * them would corrupt the source files.
+				 */
+				if (db_config && __os_abspath(*dir)) {
+					fprintf(stderr,
+     "%s: data directory '%s' is absolute path, not permitted with -D option\n",
+					     progname, *dir);
+					goto shutdown;
+				}
+				if (db_hotbackup_read_data_dir(dbenv, home,
+				     backup_dir, *dir, verbose, db_config) != 0)
+					goto shutdown;
+			}
+	}
+
+	/*
+	 * Copy all log files found in the directory specified by the -l option
+	 * (or in the database environment home directory, if no -l option was
+	 * specified), into the target directory for the backup.
+	 *
+	 * The log directory defaults to the home directory.
+	 */
+	if (db_hotbackup_read_log_dir(dbenv, db_config ? home : NULL, backup_dir,
+	     log_dir == NULL ? home : log_dir, &copy_min, update, verbose) != 0)
+		goto shutdown;
+
+	/*
+	 * If we're updating a snapshot, the lowest-numbered log file copied
+	 * into the backup directory should be less than, or equal to, the
+	 * highest-numbered log file removed from the backup directory during
+	 * cleanup.
+	 */
+	if (update && remove_max < copy_min &&
+	     !(remove_max == 0 && copy_min == 1)) {
+		fprintf(stderr,
+		    "%s: the largest log file removed (%d) must be greater\n",
+		    progname, remove_max);
+		fprintf(stderr,
+		    "%s: than or equal the smallest log file copied (%d)\n",
+		    progname, copy_min);
+		goto shutdown;
+	}
+
+	/* Close the source environment. */
+	if ((ret = dbenv->close(dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+		dbenv = NULL;
+		goto shutdown;
+	}
+	/* Perform catastrophic recovery on the hot backup. */
+	if (verbose)
+		printf("%s: %s: run catastrophic recovery\n",
+		    progname, backup_dir);
+	if (db_hotbackup_env_init(
+	    &dbenv, backup_dir, NULL, NULL, passwd, OPEN_HOT_BACKUP) != 0)
+		goto shutdown;
+
+	/*
+	 * Remove any unnecessary log files from the hot backup.
+	 */
+	if (verbose)
+		printf("%s: %s: remove unnecessary log files\n",
+		    progname, backup_dir);
+	if ((ret =
+	    dbenv->log_archive(dbenv, NULL, DB_ARCH_REMOVE)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->log_archive");
+		goto shutdown;
+	}
+
+	if (0) {
+shutdown:	exitval = 1;
+	}
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (exitval == 0) {
+		if (verbose) {
+			(void)time(&now);
+			printf("%s: hot backup completed at %s",
+			    progname, __os_ctime(&now, time_buf));
+		}
+	} else {
+		fprintf(stderr, "%s: HOT BACKUP FAILED!\n", progname);
+	}
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+
+}
+
+/*
+ * env_init --
+ *	Open a database environment.
+ */
+int
+db_hotbackup_env_init(dbenvp, home, log_dirp, data_dirp, passwd, which)
+	DB_ENV **dbenvp;
+	char *home, **log_dirp, ***data_dirp, *passwd;
+	enum which_open which;
+{
+	DB_ENV *dbenv;
+	int ret;
+
+	*dbenvp = NULL;
+
+	/*
+	 * Create an environment object and initialize it for error reporting.
+	 */
+	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		return (1);
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	setbuf(stderr, NULL);
+	dbenv->set_errpfx(dbenv, progname);
+
+	/* Any created intermediate directories are created private. */
+	if ((ret = dbenv->set_intermediate_dir_mode(dbenv, "rwx------")) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->set_intermediate_dir_mode");
+		return (1);
+	}
+
+	/*
+	 * If a log directory has been specified, and it's not the same as the
+	 * home directory, set it for the environment.
+	 */
+	if (log_dirp != NULL && *log_dirp != NULL &&
+	    (ret = dbenv->set_lg_dir(dbenv, *log_dirp)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->set_lg_dir: %s", *log_dirp);
+		return (1);
+	}
+
+	/* Optionally set the password. */
+	if (passwd != NULL &&
+	    (ret = dbenv->set_encrypt(dbenv, passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->set_encrypt");
+		return (1);
+	}
+
+	switch (which) {
+	case OPEN_ORIGINAL:
+		/*
+		 * Opening the database environment we're trying to back up.
+		 * We try to attach to a pre-existing environment; if that
+		 * fails, we create a private environment and try again.
+		 */
+		if ((ret = dbenv->open(dbenv, home, DB_USE_ENVIRON, 0)) != 0 &&
+		    (ret == DB_VERSION_MISMATCH ||
+		    (ret = dbenv->open(dbenv, home, DB_CREATE |
+		    DB_INIT_LOG | DB_INIT_TXN | DB_PRIVATE | DB_USE_ENVIRON,
+		    0)) != 0)) {
+			dbenv->err(dbenv, ret, "DB_ENV->open: %s", home);
+			return (1);
+		}
+		if (log_dirp != NULL && *log_dirp == NULL)
+			(void)dbenv->get_lg_dir(dbenv, (const char **)log_dirp);
+		if (data_dirp != NULL && *data_dirp == NULL)
+			(void)dbenv->get_data_dirs(
+			    dbenv, (const char ***)data_dirp);
+		break;
+	case OPEN_HOT_BACKUP:
+		/*
+		 * Opening the backup copy of the database environment.  We
+		 * better be the only user, we're running recovery.
+		 * Ensure that there at least minimal cache for worst
+		 * case page size.
+		 */
+		if ((ret =
+		    dbenv->set_cachesize(dbenv, 0, 64 * 1024 * 10, 0)) != 0) {
+			dbenv->err(dbenv,
+			     ret, "DB_ENV->set_cachesize: %s", home);
+			return (1);
+		}
+		if ((ret = dbenv->open(dbenv, home, DB_CREATE |
+		    DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN | DB_PRIVATE |
+		    DB_RECOVER_FATAL | DB_USE_ENVIRON, 0)) != 0) {
+			dbenv->err(dbenv, ret, "DB_ENV->open: %s", home);
+			return (1);
+		}
+		break;
+	}
+
+	*dbenvp = dbenv;
+	return (0);
+}
+
+/*
+ * backup_dir_clean --
+ *	Clean out the backup directory.
+ */
+int
+db_hotbackup_backup_dir_clean(dbenv, backup_dir, log_dir, remove_maxp, update, verbose)
+	DB_ENV *dbenv;
+	char *backup_dir, *log_dir;
+	int *remove_maxp, update, verbose;
+{
+	ENV *env;
+	int cnt, fcnt, ret, v;
+	char **names, *dir, buf[DB_MAXPATHLEN], path[DB_MAXPATHLEN];
+
+	env = dbenv->env;
+
+	/* We may be cleaning a log directory separate from the target. */
+	if (log_dir != NULL) {
+		if ((size_t)snprintf(buf, sizeof(buf), "%s%c%s",
+		    backup_dir, PATH_SEPARATOR[0] ,log_dir) >= sizeof(buf)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			    backup_dir, PATH_SEPARATOR[0] ,log_dir);
+			return (1);
+		}
+		dir = buf;
+	} else
+		dir = backup_dir;
+
+	/* Get a list of file names. */
+	if ((ret = __os_dirlist(env, dir, 0, &names, &fcnt)) != 0) {
+		if (log_dir != NULL && !update)
+			return (0);
+		dbenv->err(dbenv, ret, "%s: directory read", dir);
+		return (1);
+	}
+	for (cnt = fcnt; --cnt >= 0;) {
+		/*
+		 * Skip non-log files (if update was specified).
+		 */
+		if (strncmp(names[cnt], LFPREFIX, sizeof(LFPREFIX) - 1)) {
+			if (update)
+				continue;
+		} else {
+			/* Track the highest-numbered log file removed. */
+			v = atoi(names[cnt] + sizeof(LFPREFIX) - 1);
+			if (*remove_maxp < v)
+				*remove_maxp = v;
+		}
+		if ((size_t)snprintf(path, sizeof(path), "%s%c%s",
+		    dir, PATH_SEPARATOR[0], names[cnt]) >= sizeof(path)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			    dir, PATH_SEPARATOR[0], names[cnt]);
+			return (1);
+		}
+		if (verbose)
+			printf("%s: removing %s\n", progname, path);
+		if (__os_unlink(env, path, 0) != 0)
+			return (1);
+	}
+
+	__os_dirfree(env, names, fcnt);
+
+	if (verbose && *remove_maxp != 0)
+		printf("%s: highest numbered log file removed: %d\n",
+		    progname, *remove_maxp);
+
+	return (0);
+}
+
+/*
+ * read_data_dir --
+ *	Read a directory looking for databases to copy.
+ */
+int
+db_hotbackup_read_data_dir(dbenv, home, backup_dir, dir, verbose, db_config)
+	DB_ENV *dbenv;
+	char *home, *backup_dir, *dir;
+	int verbose, db_config;
+{
+	ENV *env;
+	int cnt, fcnt, ret;
+	char *bd, **names;
+	char buf[DB_MAXPATHLEN], bbuf[DB_MAXPATHLEN];
+
+	env = dbenv->env;
+
+	bd = backup_dir;
+	if (db_config && dir != home) {
+		/* Build a path name to the destination. */
+		if ((size_t)(cnt = snprintf(bbuf, sizeof(bbuf), "%s%c%s%c",
+		      backup_dir, PATH_SEPARATOR[0],
+		      dir, PATH_SEPARATOR[0])) >= sizeof(buf)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			     backup_dir, PATH_SEPARATOR[0], dir);
+			return (1);
+		}
+		bd = bbuf;
+
+		/* Create the path. */
+		if ((ret = __db_mkpath(env, bd)) != 0) {
+			dbenv->err(dbenv, ret, "%s: cannot create", bd);
+			return (1);
+		}
+		/* step on the trailing '/' */
+		bd[cnt - 1] = '\0';
+
+		/* Build a path name to the source. */
+		if ((size_t)snprintf(buf, sizeof(buf),
+		    "%s%c%s", home, PATH_SEPARATOR[0], dir) >= sizeof(buf)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			    home, PATH_SEPARATOR[0], dir);
+			return (1);
+		}
+		dir = buf;
+	}
+	/* Get a list of file names. */
+	if ((ret = __os_dirlist(env, dir, 0, &names, &fcnt)) != 0) {
+		dbenv->err(dbenv, ret, "%s: directory read", dir);
+		return (1);
+	}
+	for (cnt = fcnt; --cnt >= 0;) {
+		/*
+		 * Skip files in DB's name space (but not Queue
+		 * extent files, we need them).
+		 */
+		if (!strncmp(names[cnt], LFPREFIX, sizeof(LFPREFIX) - 1))
+			continue;
+		if (!strncmp(names[cnt],
+		    DB_REGION_PREFIX, sizeof(DB_REGION_PREFIX) - 1) &&
+		    strncmp(names[cnt],
+		    QUEUE_EXTENT_PREFIX, sizeof(QUEUE_EXTENT_PREFIX) - 1))
+			continue;
+
+		/*
+		 * Skip DB_CONFIG.
+		 */
+		if (!db_config &&
+		     !strncmp(names[cnt], "DB_CONFIG", sizeof("DB_CONFIG")))
+			continue;
+
+		/* Copy the file. */
+		if (db_hotbackup_data_copy(dbenv, names[cnt], dir, bd, verbose) != 0)
+			return (1);
+	}
+
+	__os_dirfree(env, names, fcnt);
+
+	return (0);
+}
+
+/*
+ * read_log_dir --
+ * *	Read a directory looking for log files to copy.  If home
+ * is passed then we are possibly using a log dir in the destination,
+ * following DB_CONFIG configuration.
+ */
+int
+db_hotbackup_read_log_dir(dbenv, home, backup_dir, log_dir, copy_minp, update, verbose)
+	DB_ENV *dbenv;
+	char *home, *backup_dir, *log_dir;
+	int *copy_minp, update, verbose;
+{
+	ENV *env;
+	u_int32_t aflag;
+	int cnt, ret, v;
+	char **begin, **names, *backupd, *logd;
+	char from[DB_MAXPATHLEN], to[DB_MAXPATHLEN];
+
+	env = dbenv->env;
+
+	if (home != NULL && log_dir != NULL) {
+		if ((size_t)snprintf(from, sizeof(from), "%s%c%s",
+		    home, PATH_SEPARATOR[0], log_dir) >= sizeof(from)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			    home, PATH_SEPARATOR[0], log_dir);
+			return (1);
+		}
+		logd = strdup(from);
+		if ((size_t)(cnt = snprintf(to, sizeof(to),
+		    "%s%c%s%c", backup_dir, PATH_SEPARATOR[0],
+		    log_dir, PATH_SEPARATOR[0])) >= sizeof(to)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			    backup_dir, PATH_SEPARATOR[0], log_dir);
+			return (1);
+		}
+		backupd = strdup(to);
+
+		/* Create the backup log directory. */
+		if ((ret = __db_mkpath(env, backupd)) != 0) {
+			dbenv->err(dbenv, ret, "%s: cannot create", backupd);
+			return (1);
+		}
+		/* Step on the trailing '/'. */
+		backupd[cnt - 1] = '\0';
+	} else {
+		backupd = backup_dir;
+		logd = log_dir;
+	}
+
+again:	aflag = DB_ARCH_LOG;
+
+	/*
+	 * If this is an update and we are deleting files, first process
+	 * those files that can be removed, then repeat with the rest.
+	 */
+	if (update)
+		aflag = 0;
+	/* Get a list of file names to be copied. */
+	if ((ret = dbenv->log_archive(dbenv, &names, aflag)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->log_archive");
+		return (1);
+	}
+	if (names == NULL)
+		goto done;
+	begin = names;
+	for (; *names != NULL; names++) {
+		/* Track the lowest-numbered log file copied. */
+		v = atoi(*names + sizeof(LFPREFIX) - 1);
+		if (*copy_minp == 0 || *copy_minp > v)
+			*copy_minp = v;
+
+		if ((size_t)snprintf(from, sizeof(from), "%s%c%s",
+		    logd, PATH_SEPARATOR[0], *names) >= sizeof(from)) {
+			dbenv->errx(dbenv, "%s%c%s: path too long",
+			    logd, PATH_SEPARATOR[0], *names);
+			return (1);
+		}
+
+		/*
+		 * If we're going to remove the file, attempt to rename the
+		 * instead of copying and then removing.  The likely failure
+		 * is EXDEV (source and destination are on different volumes).
+		 * Fall back to a copy, regardless of the error.  We don't
+		 * worry about partial contents, the copy truncates the file
+		 * on open.
+		 */
+		if (update) {
+			if ((size_t)snprintf(to, sizeof(to), "%s%c%s",
+			    backupd, PATH_SEPARATOR[0], *names) >= sizeof(to)) {
+				dbenv->errx(dbenv, "%s%c%s: path too long",
+				    backupd, PATH_SEPARATOR[0], *names);
+				return (1);
+			}
+			if (__os_rename(env, from, to, 1) == 0) {
+				if (verbose)
+					printf("%s: moving %s to %s\n",
+					   progname, from, to);
+				continue;
+			}
+		}
+
+		/* Copy the file. */
+		if (db_hotbackup_data_copy(dbenv, *names, logd, backupd, verbose) != 0)
+			return (1);
+
+		if (update) {
+			if (verbose)
+				printf("%s: removing %s\n", progname, from);
+			if ((ret = __os_unlink(env, from, 0)) != 0) {
+				dbenv->err(dbenv, ret,
+				     "unlink of %s failed", from);
+				return (1);
+			}
+		}
+
+	}
+
+	free(begin);
+done:	if (update) {
+		update = 0;
+		goto again;
+	}
+
+	if (verbose && *copy_minp != 0)
+		printf("%s: lowest numbered log file copied: %d\n",
+		    progname, *copy_minp);
+	if (logd != log_dir)
+		free(logd);
+	if (backupd != backup_dir)
+		free(backupd);
+
+	return (0);
+}
+
+/*
+ * data_copy --
+ *	Copy a file into the backup directory.
+ */
+int
+db_hotbackup_data_copy(dbenv, file, from_dir, to_dir, verbose)
+	DB_ENV *dbenv;
+	char *file, *from_dir, *to_dir;
+	int verbose;
+{
+	DB_FH *rfhp, *wfhp;
+	ENV *env;
+	size_t nr, nw;
+	int ret;
+	char *buf;
+
+	rfhp = wfhp = NULL;
+	env = dbenv->env;
+	ret = 0;
+
+	if (verbose)
+		printf("%s: copying %s%c%s to %s%c%s\n", progname, from_dir,
+		    PATH_SEPARATOR[0], file, to_dir, PATH_SEPARATOR[0], file);
+
+	/*
+	 * We MUST copy multiples of the page size, atomically, to ensure a
+	 * database page is not updated by another thread of control during
+	 * the copy.
+	 *
+	 * !!!
+	 * The current maximum page size for Berkeley DB is 64KB; we will have
+	 * to increase this value if the maximum page size is ever more than a
+	 * megabyte
+	 */
+	if ((buf = malloc(MEGABYTE)) == NULL) {
+		dbenv->err(dbenv,
+		    errno, "%lu buffer allocation", (u_long)MEGABYTE);
+		return (1);
+	}
+
+	/* Open the input file. */
+	if (snprintf(buf, MEGABYTE, "%s%c%s",
+	    from_dir, PATH_SEPARATOR[0], file) >= MEGABYTE) {
+		dbenv->errx(dbenv,
+		    "%s%c%s: path too long", from_dir, PATH_SEPARATOR[0], file);
+		goto err;
+	}
+	if ((ret = __os_open(env, buf, 0, DB_OSO_RDONLY, 0, &rfhp)) != 0) {
+		dbenv->err(dbenv, ret, "%s", buf);
+		goto err;
+	}
+
+	/* Open the output file. */
+	if (snprintf(buf, MEGABYTE, "%s%c%s",
+	    to_dir, PATH_SEPARATOR[0], file) >= MEGABYTE) {
+		dbenv->errx(dbenv,
+		    "%s%c%s: path too long", to_dir, PATH_SEPARATOR[0], file);
+		goto err;
+	}
+	if ((ret = __os_open(env, buf, 0,
+	    DB_OSO_CREATE | DB_OSO_TRUNC, DB_MODE_600, &wfhp)) != 0) {
+		dbenv->err(dbenv, ret, "%s", buf);
+		goto err;
+	}
+
+	/* Copy the data. */
+	while ((ret = __os_read(env, rfhp, buf, MEGABYTE, &nr)) == 0 &&
+	    nr > 0)
+		if ((ret = __os_write(env, wfhp, buf, nr, &nw)) != 0)
+			break;
+
+	if (0) {
+err:		ret = 1;
+	}
+	if (buf != NULL)
+		free(buf);
+
+	if (rfhp != NULL && __os_closehandle(env, rfhp) != 0)
+		ret = 1;
+
+	/* We may be running on a remote filesystem; force the flush. */
+	if (wfhp != NULL) {
+		if (__os_fsync(env, wfhp) != 0)
+			ret = 1;
+		if (__os_closehandle(env, wfhp) != 0)
+			ret = 1;
+	}
+	return (ret);
+}
+
+int
+db_hotbackup_usage()
+{
+	(void)fprintf(stderr, "usage: %s [-cDuVv]\n\t%s\n", progname,
+    "[-d data_dir ...] [-h home] [-l log_dir] [-P password] -b backup_dir");
+	return (EXIT_FAILURE);
+}
+
+int
+db_hotbackup_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_hotbackup/db_hotbackup20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_hotbackup20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_hotbackup20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_hotbackup20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_hotbackup.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_hotbackup.c_dependencies
+<END>
+
+<BEGIN> FILE_db_hotbackup.c_objects
+db_hotbackup.o
+<END>
+
+<BEGIN> FILE_db_hotbackup.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_hotbackup.c
+<END>
+
+<BEGIN> userComments
+db_hotbackup
+<END>

build_vxworks/db_hotbackup/db_hotbackup22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_hotbackup22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_hotbackup22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_hotbackup22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_hotbackup22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_hotbackup.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_hotbackup.c_dependencies
+<END>
+
+<BEGIN> FILE_db_hotbackup.c_objects
+db_hotbackup.o
+<END>
+
+<BEGIN> FILE_db_hotbackup.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_hotbackup.c
+<END>
+
+<BEGIN> userComments
+db_hotbackup
+<END>

build_vxworks/db_int.h

@@ -0,0 +1,916 @@
+/* DO NOT EDIT: automatically built by dist/s_vxworks. */
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_int.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#ifndef _DB_INT_H_
+#define	_DB_INT_H_
+
+/*******************************************************
+ * Berkeley DB ANSI/POSIX include files.
+ *******************************************************/
+#include "vxWorks.h"
+#ifdef HAVE_SYSTEM_INCLUDE_FILES
+#include <sys/types.h>
+#ifdef DIAG_MVCC
+#include <sys/mman.h>
+#endif
+#include <sys/stat.h>
+
+#if defined(__INCLUDE_SELECT_H)
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#ifdef HAVE_VXWORKS
+#include <selectLib.h>
+#endif
+#endif
+
+#if TIME_WITH_SYS_TIME
+#include <sys/time.h>
+#include <time.h>
+#else
+#if HAVE_SYS_TIME_H
+#include <sys/time.h>
+#else
+#include <time.h>
+#endif
+#endif
+
+#ifdef HAVE_VXWORKS
+#include <net/uio.h>
+#else
+#include <sys/uio.h>
+#endif
+
+#if defined(__INCLUDE_NETWORKING)
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#include <netinet/in.h>
+#include <netdb.h>
+#include <arpa/inet.h>
+#endif
+
+#if defined(STDC_HEADERS) || defined(__cplusplus)
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <signal.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#if defined(__INCLUDE_DIRECTORY)
+#if HAVE_DIRENT_H
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# if HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# if HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# if HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif
+#endif /* __INCLUDE_DIRECTORY */
+
+#endif /* !HAVE_SYSTEM_INCLUDE_FILES */
+#include "clib_port.h"
+#include "db.h"
+
+#ifdef DB_WIN32
+#include "dbinc/win_db.h"
+#endif
+
+#include "db.h"
+#include "clib_port.h"
+
+#include "dbinc/queue.h"
+#include "dbinc/shqueue.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*******************************************************
+ * Forward structure declarations.
+ *******************************************************/
+struct __db_reginfo_t;	typedef struct __db_reginfo_t REGINFO;
+struct __db_txnhead;	typedef struct __db_txnhead DB_TXNHEAD;
+struct __db_txnlist;	typedef struct __db_txnlist DB_TXNLIST;
+struct __vrfy_childinfo;typedef struct __vrfy_childinfo VRFY_CHILDINFO;
+struct __vrfy_dbinfo;   typedef struct __vrfy_dbinfo VRFY_DBINFO;
+struct __vrfy_pageinfo; typedef struct __vrfy_pageinfo VRFY_PAGEINFO;
+
+typedef SH_TAILQ_HEAD(__hash_head) DB_HASHTAB;
+
+/*******************************************************
+ * General purpose constants and macros.
+ *******************************************************/
+#undef	FALSE
+#define	FALSE		0
+#undef	TRUE
+#define	TRUE		(!FALSE)
+
+#define	MEGABYTE	1048576
+#define	GIGABYTE	1073741824
+
+#define	NS_PER_MS	1000000		/* Nanoseconds in a millisecond */
+#define	NS_PER_US	1000		/* Nanoseconds in a microsecond */
+#define	NS_PER_SEC	1000000000	/* Nanoseconds in a second */
+#define	US_PER_MS	1000		/* Microseconds in a millisecond */
+#define	US_PER_SEC	1000000		/* Microseconds in a second */
+#define	MS_PER_SEC	1000		/* Milliseconds in a second */
+
+#define	RECNO_OOB	0		/* Illegal record number. */
+
+/* Test for a power-of-two (tests true for zero, which doesn't matter here). */
+#define	POWER_OF_TWO(x)	(((x) & ((x) - 1)) == 0)
+
+/* Test for valid page sizes. */
+#define	DB_MIN_PGSIZE	0x000200	/* Minimum page size (512). */
+#define	DB_MAX_PGSIZE	0x010000	/* Maximum page size (65536). */
+#define	IS_VALID_PAGESIZE(x)						\
+	(POWER_OF_TWO(x) && (x) >= DB_MIN_PGSIZE && ((x) <= DB_MAX_PGSIZE))
+
+/* Minimum number of pages cached, by default. */
+#define	DB_MINPAGECACHE	16
+
+/*
+ * If we are unable to determine the underlying filesystem block size, use
+ * 8K on the grounds that most OS's use less than 8K for a VM page size.
+ */
+#define	DB_DEF_IOSIZE	(8 * 1024)
+
+/* Align an integer to a specific boundary. */
+#undef	DB_ALIGN
+#define	DB_ALIGN(v, bound)						\
+	(((v) + (bound) - 1) & ~(((uintmax_t)(bound)) - 1))
+
+/* Increment a pointer to a specific boundary. */
+#undef	ALIGNP_INC
+#define	ALIGNP_INC(p, bound)						\
+	(void *)(((uintptr_t)(p) + (bound) - 1) & ~(((uintptr_t)(bound)) - 1))
+
+/*
+ * Print an address as a u_long (a u_long is the largest type we can print
+ * portably).  Most 64-bit systems have made longs 64-bits, so this should
+ * work.
+ */
+#define	P_TO_ULONG(p)	((u_long)(uintptr_t)(p))
+
+/*
+ * Convert a pointer to a small integral value.
+ *
+ * The (u_int16_t)(uintptr_t) cast avoids warnings: the (uintptr_t) cast
+ * converts the value to an integral type, and the (u_int16_t) cast converts
+ * it to a small integral type so we don't get complaints when we assign the
+ * final result to an integral type smaller than uintptr_t.
+ */
+#define	P_TO_UINT32(p)	((u_int32_t)(uintptr_t)(p))
+#define	P_TO_UINT16(p)	((u_int16_t)(uintptr_t)(p))
+
+/*
+ * There are several on-page structures that are declared to have a number of
+ * fields followed by a variable length array of items.  The structure size
+ * without including the variable length array or the address of the first of
+ * those elements can be found using SSZ.
+ *
+ * This macro can also be used to find the offset of a structure element in a
+ * structure.  This is used in various places to copy structure elements from
+ * unaligned memory references, e.g., pointers into a packed page.
+ *
+ * There are two versions because compilers object if you take the address of
+ * an array.
+ */
+#undef	SSZ
+#define	SSZ(name, field)  P_TO_UINT16(&(((name *)0)->field))
+
+#undef	SSZA
+#define	SSZA(name, field) P_TO_UINT16(&(((name *)0)->field[0]))
+
+/* Structure used to print flag values. */
+typedef struct __fn {
+	u_int32_t mask;			/* Flag value. */
+	const char *name;		/* Flag name. */
+} FN;
+
+/* Set, clear and test flags. */
+#define	FLD_CLR(fld, f)		(fld) &= ~(f)
+#define	FLD_ISSET(fld, f)	((fld) & (f))
+#define	FLD_SET(fld, f)		(fld) |= (f)
+#define	F_CLR(p, f)		(p)->flags &= ~(f)
+#define	F_ISSET(p, f)		((p)->flags & (f))
+#define	F_SET(p, f)		(p)->flags |= (f)
+#define	LF_CLR(f)		((flags) &= ~(f))
+#define	LF_ISSET(f)		((flags) & (f))
+#define	LF_SET(f)		((flags) |= (f))
+
+/*
+ * Calculate a percentage.  The values can overflow 32-bit integer arithmetic
+ * so we use floating point.
+ *
+ * When calculating a bytes-vs-page size percentage, we're getting the inverse
+ * of the percentage in all cases, that is, we want 100 minus the percentage we
+ * calculate.
+ */
+#define	DB_PCT(v, total)						\
+	((int)((total) == 0 ? 0 : ((double)(v) * 100) / (total)))
+#define	DB_PCT_PG(v, total, pgsize)					\
+	((int)((total) == 0 ? 0 :					\
+	    100 - ((double)(v) * 100) / (((double)total) * (pgsize))))
+
+/*
+ * Statistics update shared memory and so are expensive -- don't update the
+ * values unless we're going to display the results.
+ */
+#undef	STAT
+#ifdef	HAVE_STATISTICS
+#define	STAT(x)	x
+#else
+#define	STAT(x)
+#endif
+
+/*
+ * Structure used for callback message aggregation.
+ *
+ * Display values in XXX_stat_print calls.
+ */
+typedef struct __db_msgbuf {
+	char *buf;			/* Heap allocated buffer. */
+	char *cur;			/* Current end of message. */
+	size_t len;			/* Allocated length of buffer. */
+} DB_MSGBUF;
+#define	DB_MSGBUF_INIT(a) do {						\
+	(a)->buf = (a)->cur = NULL;					\
+	(a)->len = 0;							\
+} while (0)
+#define	DB_MSGBUF_FLUSH(env, a) do {					\
+	if ((a)->buf != NULL) {						\
+		if ((a)->cur != (a)->buf)				\
+			__db_msg(env, "%s", (a)->buf);		\
+		__os_free(env, (a)->buf);				\
+		DB_MSGBUF_INIT(a);					\
+	}								\
+} while (0)
+#define	STAT_FMT(msg, fmt, type, v) do {				\
+	DB_MSGBUF __mb;							\
+	DB_MSGBUF_INIT(&__mb);						\
+	__db_msgadd(env, &__mb, fmt, (type)(v));			\
+	__db_msgadd(env, &__mb, "\t%s", msg);				\
+	DB_MSGBUF_FLUSH(env, &__mb);					\
+} while (0)
+#define	STAT_HEX(msg, v)						\
+	__db_msg(env, "%#lx\t%s", (u_long)(v), msg)
+#define	STAT_ISSET(msg, p)						\
+	__db_msg(env, "%sSet\t%s", (p) == NULL ? "!" : " ", msg)
+#define	STAT_LONG(msg, v)						\
+	__db_msg(env, "%ld\t%s", (long)(v), msg)
+#define	STAT_LSN(msg, lsnp)						\
+	__db_msg(env, "%lu/%lu\t%s",					\
+	    (u_long)(lsnp)->file, (u_long)(lsnp)->offset, msg)
+#define	STAT_POINTER(msg, v)						\
+	__db_msg(env, "%#lx\t%s", P_TO_ULONG(v), msg)
+#define	STAT_STRING(msg, p) do {					\
+	const char *__p = p;	/* p may be a function call. */		\
+	__db_msg(env, "%s\t%s", __p == NULL ? "!Set" : __p, msg);	\
+} while (0)
+#define	STAT_ULONG(msg, v)						\
+	__db_msg(env, "%lu\t%s", (u_long)(v), msg)
+
+/*
+ * There are quite a few places in Berkeley DB where we want to initialize
+ * a DBT from a string or other random pointer type, using a length typed
+ * to size_t in most cases.  This macro avoids a lot of casting.  The macro
+ * comes in two flavors because we often want to clear the DBT first.
+ */
+#define	DB_SET_DBT(dbt, d, s)  do {					\
+	(dbt).data = (void *)(d);					\
+	(dbt).size = (u_int32_t)(s);					\
+} while (0)
+#define	DB_INIT_DBT(dbt, d, s)  do {					\
+	memset(&(dbt), 0, sizeof(dbt));					\
+	DB_SET_DBT(dbt, d, s);						\
+} while (0)
+
+/*******************************************************
+ * API return values
+ *******************************************************/
+/*
+ * Return values that are OK for each different call.  Most calls have a
+ * standard 'return of 0 is only OK value', but some, like db->get have
+ * DB_NOTFOUND as a return value, but it really isn't an error.
+ */
+#define	DB_RETOK_STD(ret)	((ret) == 0)
+#define	DB_RETOK_DBCDEL(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCGET(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBDEL(ret)	DB_RETOK_DBCDEL(ret)
+#define	DB_RETOK_DBGET(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_DBPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST)
+#define	DB_RETOK_EXISTS(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_LGGET(ret)	((ret) == 0 || (ret) == DB_NOTFOUND)
+#define	DB_RETOK_MPGET(ret)	((ret) == 0 || (ret) == DB_PAGE_NOTFOUND)
+#define	DB_RETOK_REPPMSG(ret)	((ret) == 0 || \
+				    (ret) == DB_REP_IGNORE || \
+				    (ret) == DB_REP_ISPERM || \
+				    (ret) == DB_REP_NEWMASTER || \
+				    (ret) == DB_REP_NEWSITE || \
+				    (ret) == DB_REP_NOTPERM)
+
+/* Find a reasonable operation-not-supported error. */
+#ifdef	EOPNOTSUPP
+#define	DB_OPNOTSUP	EOPNOTSUPP
+#else
+#ifdef	ENOTSUP
+#define	DB_OPNOTSUP	ENOTSUP
+#else
+#define	DB_OPNOTSUP	EINVAL
+#endif
+#endif
+
+/*******************************************************
+ * Files.
+ *******************************************************/
+/*
+ * We use 1024 as the maximum path length.  It's too hard to figure out what
+ * the real path length is, as it was traditionally stored in <sys/param.h>,
+ * and that file isn't always available.
+ */
+#define	DB_MAXPATHLEN	1024
+
+#define	PATH_DOT	"."	/* Current working directory. */
+				/* Path separator character(s). */
+#define	PATH_SEPARATOR	"/\\"
+
+/*******************************************************
+ * Environment.
+ *******************************************************/
+/* Type passed to __db_appname(). */
+typedef enum {
+	DB_APP_NONE=0,			/* No type (region). */
+	DB_APP_DATA,			/* Data file. */
+	DB_APP_LOG,			/* Log file. */
+	DB_APP_TMP			/* Temporary file. */
+} APPNAME;
+
+/*
+ * A set of macros to check if various functionality has been configured.
+ *
+ * ALIVE_ON	The is_alive function is configured.
+ * CDB_LOCKING	CDB product locking.
+ * CRYPTO_ON	Security has been configured.
+ * LOCKING_ON	Locking has been configured.
+ * LOGGING_ON	Logging has been configured.
+ * MUTEX_ON	Mutexes have been configured.
+ * MPOOL_ON	Memory pool has been configured.
+ * REP_ON	Replication has been configured.
+ * RPC_ON	RPC has been configured.
+ * TXN_ON	Transactions have been configured.
+ *
+ * REP_ON is more complex than most: if the BDB library was compiled without
+ * replication support, ENV->rep_handle will be NULL; if the BDB library has
+ * replication support, but it was not configured, the region reference will
+ * be NULL.
+ */
+#define	ALIVE_ON(env)		((env)->dbenv->is_alive != NULL)
+#define	CDB_LOCKING(env)	F_ISSET(env, ENV_CDB)
+#define	CRYPTO_ON(env)		((env)->crypto_handle != NULL)
+#define	LOCKING_ON(env)		((env)->lk_handle != NULL)
+#define	LOGGING_ON(env)		((env)->lg_handle != NULL)
+#define	MPOOL_ON(env)		((env)->mp_handle != NULL)
+#define	MUTEX_ON(env)		((env)->mutex_handle != NULL)
+#define	REP_ON(env)							\
+	((env)->rep_handle != NULL && (env)->rep_handle->region != NULL)
+#define	RPC_ON(dbenv)		((dbenv)->cl_handle != NULL)
+#define	TXN_ON(env)		((env)->tx_handle != NULL)
+
+/*
+ * STD_LOCKING	Standard locking, that is, locking was configured and CDB
+ *		was not.  We do not do locking in off-page duplicate trees,
+ *		so we check for that in the cursor first.
+ */
+#define	STD_LOCKING(dbc)						\
+	(!F_ISSET(dbc, DBC_OPD) &&					\
+	    !CDB_LOCKING((dbc)->env) && LOCKING_ON((dbc)->env))
+
+/*
+ * IS_RECOVERING: The system is running recovery.
+ */
+#define	IS_RECOVERING(env)						\
+	(LOGGING_ON(env) && F_ISSET((env)->lg_handle, DBLOG_RECOVER))
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	ENV_ILLEGAL_AFTER_OPEN(env, name)				\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 1));
+#define	ENV_ILLEGAL_BEFORE_OPEN(env, name)				\
+	if (!F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 0));
+
+/* We're not actually user hostile, honest. */
+#define	ENV_REQUIRES_CONFIG(env, handle, i, flags)			\
+	if (handle == NULL)						\
+		return (__env_not_config(env, i, flags));
+#define	ENV_REQUIRES_CONFIG_XX(env, handle, i, flags)			\
+	if ((env)->handle->region == NULL)				\
+		return (__env_not_config(env, i, flags));
+#define	ENV_NOT_CONFIGURED(env, handle, i, flags)			\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		ENV_REQUIRES_CONFIG(env, handle, i, flags)
+
+#define	ENV_ENTER(env, ip) do {						\
+	int __ret;							\
+	PANIC_CHECK(env);						\
+	if ((env)->thr_hashtab == NULL)					\
+		ip = NULL;						\
+	else {								\
+		if ((__ret =						\
+		    __env_set_state(env, &(ip), THREAD_ACTIVE)) != 0)	\
+			return (__ret);					\
+	}								\
+} while (0)
+
+#define ENV_GET_THREAD_INFO(env, ip) ENV_ENTER(env, ip)
+
+#ifdef DIAGNOSTIC
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL) {						\
+		DB_ASSERT(env, (ip)->dbth_state == THREAD_ACTIVE);	\
+		(ip)->dbth_state = THREAD_OUT;				\
+	}								\
+} while (0)
+#else
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL)						\
+		(ip)->dbth_state = THREAD_OUT;				\
+} while (0)
+#endif
+#ifdef DIAGNOSTIC
+#define	CHECK_THREAD(env) do {						\
+	if ((env)->thr_hashtab != NULL)					\
+		(void)__env_set_state(env, NULL, THREAD_VERIFY);	\
+} while (0)
+#ifdef HAVE_STATISTICS
+#define	CHECK_MTX_THREAD(env, mtx) do {					\
+	if (mtx->alloc_id != MTX_MUTEX_REGION &&			\
+	    mtx->alloc_id != MTX_ENV_REGION &&				\
+	    mtx->alloc_id != MTX_APPLICATION)				\
+		CHECK_THREAD(env);					\
+} while (0)
+#else
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+#else
+#define	CHECK_THREAD(env)
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+
+typedef enum {
+	THREAD_SLOT_NOT_IN_USE=0,
+	THREAD_OUT,
+	THREAD_ACTIVE,
+	THREAD_BLOCKED,
+	THREAD_BLOCKED_DEAD
+#ifdef DIAGNOSTIC
+	, THREAD_VERIFY
+#endif
+} DB_THREAD_STATE;
+
+typedef struct __pin_list {
+	roff_t b_ref;		/* offset to buffer. */
+	int region;		/* region containing buffer. */
+} PIN_LIST;
+#define PINMAX 4
+
+struct __db_thread_info {
+	pid_t		dbth_pid;
+	db_threadid_t	dbth_tid;
+	DB_THREAD_STATE	dbth_state;
+	SH_TAILQ_ENTRY	dbth_links;
+	/*
+	 * The following fields track which buffers this thread of 
+	 * control has pinned in the mpool buffer cache.
+	 */
+	u_int16_t	dbth_pincount;	/* Number of pins for this thread. */
+	u_int16_t	dbth_pinmax;	/* Number of slots allocated. */
+	roff_t		dbth_pinlist;	/* List of pins. */
+	PIN_LIST	dbth_pinarray[PINMAX];	/* Initial array of slots. */
+};
+
+typedef struct __env_thread_info {
+	u_int32_t	thr_count;
+	u_int32_t	thr_max;
+	u_int32_t	thr_nbucket;
+	roff_t		thr_hashoff;
+} THREAD_INFO;
+
+#define	DB_EVENT(env, e, einfo) do {					\
+	DB_ENV *__dbenv = (env)->dbenv;					\
+	if (__dbenv->db_event_func != NULL)				\
+		__dbenv->db_event_func(__dbenv, e, einfo);		\
+} while (0)
+
+typedef struct __flag_map {
+	u_int32_t inflag, outflag;
+} FLAG_MAP;
+
+/*
+ * Internal database environment structure.
+ *
+ * This is the private database environment handle.  The public environment
+ * handle is the DB_ENV structure.   The library owns this structure, the user
+ * owns the DB_ENV structure.  The reason there are two structures is because
+ * the user's configuration outlives any particular DB_ENV->open call, and
+ * separate structures allows us to easily discard internal information without
+ * discarding the user's configuration.
+ */
+struct __env {
+	DB_ENV *dbenv;			/* Linked DB_ENV structure */
+
+	/*
+	 * The ENV structure can be used concurrently, so field access is
+	 * protected.
+	 */
+	db_mutex_t mtx_env;		/* ENV structure mutex */
+
+	/*
+	 * Some fields are included in the ENV structure rather than in the
+	 * DB_ENV structure because they are only set as arguments to the
+	 * DB_ENV->open method.  In other words, because of the historic API,
+	 * not for any rational reason.
+	 *
+	 * Arguments to DB_ENV->open.
+	 */
+	char	 *db_home;		/* Database home */
+	u_int32_t open_flags;		/* Flags */
+	int	  db_mode;		/* Default open permissions */
+
+	pid_t	pid_cache;		/* Cached process ID */
+
+	DB_FH	*lockfhp;		/* fcntl(2) locking file handle */
+
+	DB_LOCKER *env_lref;		/* Locker in non-threaded handles */
+
+	DB_DISTAB   recover_dtab;	/* Dispatch table for recover funcs */
+
+	int dir_mode;			/* Intermediate directory perms. */
+
+	/* Thread tracking */
+	u_int32_t	 thr_nbucket;	/* Number of hash buckets */
+	DB_HASHTAB	*thr_hashtab;	/* Hash table of DB_THREAD_INFO */
+
+	/* Mutex allocation */
+	struct {
+		int	  alloc_id;	/* Allocation ID argument */
+		u_int32_t flags;	/* Flags argument */
+	} *mutex_iq;			/* Initial mutexes queue */
+	u_int		mutex_iq_next;	/* Count of initial mutexes */
+	u_int		mutex_iq_max;	/* Maximum initial mutexes */
+
+	/*
+	 * List of open DB handles for this ENV, used for cursor
+	 * adjustment.  Must be protected for multi-threaded support.
+	 */
+	db_mutex_t mtx_dblist;
+	int	   db_ref;		/* DB handle reference count */
+	TAILQ_HEAD(__dblist, __db) dblist;
+
+	/*
+	 * XA support.
+	 */
+	int		 xa_rmid;		/* XA Resource Manager ID */
+	TAILQ_ENTRY(__env) links;		/* XA environments */
+	TAILQ_HEAD(__xa_txn, __db_txn) xa_txn;	/* XA active transactions */
+
+	/*
+	 * List of open file handles for this ENV.  Must be protected
+	 * for multi-threaded support.
+	 */
+	TAILQ_HEAD(__fdlist, __fh_t) fdlist;
+
+	db_mutex_t	 mtx_mt;	/* Mersenne Twister mutex */
+	int		 mti;		/* Mersenne Twister index */
+	u_long		*mt;		/* Mersenne Twister state vector */
+
+	DB_CIPHER	*crypto_handle;	/* Crypto handle */
+	DB_LOCKTAB	*lk_handle;	/* Lock handle */
+	DB_LOG		*lg_handle;	/* Log handle */
+	DB_MPOOL	*mp_handle;	/* Mpool handle */
+	DB_MUTEXMGR	*mutex_handle;	/* Mutex handle */
+	DB_REP		*rep_handle;	/* Replication handle */
+	DB_TXNMGR	*tx_handle;	/* Txn handle */
+
+	/* Application callback to copy data to/from a custom data source */
+#define	DB_USERCOPY_GETDATA	0x0001
+#define	DB_USERCOPY_SETDATA	0x0002
+	int (*dbt_usercopy)
+	    __P((DBT *, u_int32_t, void *, u_int32_t, u_int32_t));
+
+	REGINFO	*reginfo;		/* REGINFO structure reference */
+
+#define	DB_TEST_ELECTINIT	 1	/* after __rep_elect_init */
+#define	DB_TEST_ELECTVOTE1	 2	/* after sending VOTE1 */
+#define	DB_TEST_POSTDESTROY	 3	/* after destroy op */
+#define	DB_TEST_POSTLOG		 4	/* after logging all pages */
+#define	DB_TEST_POSTLOGMETA	 5	/* after logging meta in btree */
+#define	DB_TEST_POSTOPEN	 6	/* after __os_open */
+#define	DB_TEST_POSTSYNC	 7	/* after syncing the log */
+#define	DB_TEST_PREDESTROY	 8	/* before destroy op */
+#define	DB_TEST_PREOPEN		 9	/* before __os_open */
+#define	DB_TEST_SUBDB_LOCKS	 10	/* subdb locking tests */
+	int	test_abort;		/* Abort value for testing */
+	int	test_check;		/* Checkpoint value for testing */
+	int	test_copy;		/* Copy value for testing */
+
+#define	ENV_CDB			0x00000001 /* DB_INIT_CDB */
+#define	ENV_DBLOCAL		0x00000002 /* Environment for a private DB */
+#define	ENV_LITTLEENDIAN	0x00000004 /* Little endian system. */
+#define	ENV_LOCKDOWN		0x00000008 /* DB_LOCKDOWN set */
+#define	ENV_NO_OUTPUT_SET	0x00000010 /* No output channel set */
+#define	ENV_OPEN_CALLED		0x00000020 /* DB_ENV->open called */
+#define	ENV_PRIVATE		0x00000040 /* DB_PRIVATE set */
+#define	ENV_RECOVER_FATAL	0x00000080 /* Doing fatal recovery in env */
+#define	ENV_REF_COUNTED		0x00000100 /* Region references this handle */
+#define	ENV_SYSTEM_MEM		0x00000200 /* DB_SYSTEM_MEM set */
+#define	ENV_THREAD		0x00000400 /* DB_THREAD set */
+	u_int32_t flags;
+};
+
+/*******************************************************
+ * Database Access Methods.
+ *******************************************************/
+/*
+ * DB_IS_THREADED --
+ *	The database handle is free-threaded (was opened with DB_THREAD).
+ */
+#define	DB_IS_THREADED(dbp)						\
+	((dbp)->mutex != MUTEX_INVALID)
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	DB_ILLEGAL_AFTER_OPEN(dbp, name)				\
+	if (F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 1));
+#define	DB_ILLEGAL_BEFORE_OPEN(dbp, name)				\
+	if (!F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 0));
+/* Some initialization methods are illegal if environment isn't local. */
+#define	DB_ILLEGAL_IN_ENV(dbp, name)					\
+	if (!F_ISSET((dbp)->env, ENV_DBLOCAL))				\
+		return (__db_mi_env((dbp)->env, name));
+#define	DB_ILLEGAL_METHOD(dbp, flags) {					\
+	int __ret;							\
+	if ((__ret = __dbh_am_chk(dbp, flags)) != 0)			\
+		return (__ret);						\
+}
+
+/*
+ * Common DBC->internal fields.  Each access method adds additional fields
+ * to this list, but the initial fields are common.
+ */
+#define	__DBC_INTERNAL							\
+	DBC	 *opd;			/* Off-page duplicate cursor. */\
+									\
+	void	 *page;			/* Referenced page. */		\
+	db_pgno_t root;			/* Tree root. */		\
+	db_pgno_t pgno;			/* Referenced page number. */	\
+	db_indx_t indx;			/* Referenced key item index. */\
+									\
+	DB_LOCK		lock;		/* Cursor lock. */		\
+	db_lockmode_t	lock_mode;	/* Lock mode. */
+
+struct __dbc_internal {
+	__DBC_INTERNAL
+};
+
+/* Actions that __db_master_update can take. */
+typedef enum { MU_REMOVE, MU_RENAME, MU_OPEN } mu_action;
+
+/*
+ * Access-method-common macro for determining whether a cursor
+ * has been initialized.
+ */
+#define	IS_INITIALIZED(dbc)	((dbc)->internal->pgno != PGNO_INVALID)
+
+/* Free the callback-allocated buffer, if necessary, hanging off of a DBT. */
+#define	FREE_IF_NEEDED(env, dbt)					\
+	if (F_ISSET((dbt), DB_DBT_APPMALLOC)) {				\
+		__os_ufree((env), (dbt)->data);				\
+		F_CLR((dbt), DB_DBT_APPMALLOC);				\
+	}
+
+/*
+ * Use memory belonging to object "owner" to return the results of
+ * any no-DBT-flag get ops on cursor "dbc".
+ */
+#define	SET_RET_MEM(dbc, owner)				\
+	do {						\
+		(dbc)->rskey = &(owner)->my_rskey;	\
+		(dbc)->rkey = &(owner)->my_rkey;	\
+		(dbc)->rdata = &(owner)->my_rdata;	\
+	} while (0)
+
+/* Use the return-data memory src is currently set to use in dest as well. */
+#define	COPY_RET_MEM(src, dest)				\
+	do {						\
+		(dest)->rskey = (src)->rskey;		\
+		(dest)->rkey = (src)->rkey;		\
+		(dest)->rdata = (src)->rdata;		\
+	} while (0)
+
+/* Reset the returned-memory pointers to their defaults. */
+#define	RESET_RET_MEM(dbc)				\
+	do {						\
+		(dbc)->rskey = &(dbc)->my_rskey;	\
+		(dbc)->rkey = &(dbc)->my_rkey;		\
+		(dbc)->rdata = &(dbc)->my_rdata;	\
+	} while (0)
+
+/*******************************************************
+ * Mpool.
+ *******************************************************/
+/*
+ * File types for DB access methods.  Negative numbers are reserved to DB.
+ */
+#define	DB_FTYPE_SET		-1		/* Call pgin/pgout functions. */
+#define	DB_FTYPE_NOTSET		 0		/* Don't call... */
+#define	DB_LSN_OFF_NOTSET	-1		/* Not yet set. */
+#define	DB_CLEARLEN_NOTSET	UINT32_MAX	/* Not yet set. */
+
+/* Structure used as the DB pgin/pgout pgcookie. */
+typedef struct __dbpginfo {
+	size_t	db_pagesize;		/* Underlying page size. */
+	u_int32_t flags;		/* Some DB_AM flags needed. */
+	DBTYPE  type;			/* DB type */
+} DB_PGINFO;
+
+/*******************************************************
+ * Log.
+ *******************************************************/
+/* Initialize an LSN to 'zero'. */
+#define	ZERO_LSN(LSN) do {						\
+	(LSN).file = 0;							\
+	(LSN).offset = 0;						\
+} while (0)
+#define	IS_ZERO_LSN(LSN)	((LSN).file == 0 && (LSN).offset == 0)
+
+#define	IS_INIT_LSN(LSN)	((LSN).file == 1 && (LSN).offset == 0)
+#define	INIT_LSN(LSN)		do {					\
+	(LSN).file = 1;							\
+	(LSN).offset = 0;						\
+} while (0)
+
+#define	MAX_LSN(LSN) do {						\
+	(LSN).file = UINT32_MAX;					\
+	(LSN).offset = UINT32_MAX;					\
+} while (0)
+#define	IS_MAX_LSN(LSN) \
+	((LSN).file == UINT32_MAX && (LSN).offset == UINT32_MAX)
+
+/* If logging is turned off, smash the lsn. */
+#define	LSN_NOT_LOGGED(LSN) do {					\
+	(LSN).file = 0;							\
+	(LSN).offset = 1;						\
+} while (0)
+#define	IS_NOT_LOGGED_LSN(LSN) \
+	((LSN).file == 0 && (LSN).offset == 1)
+
+/*
+ * LOG_COMPARE -- compare two LSNs.
+ */
+
+#define	LOG_COMPARE(lsn0, lsn1)						\
+    ((lsn0)->file != (lsn1)->file ?					\
+    ((lsn0)->file < (lsn1)->file ? -1 : 1) :				\
+    ((lsn0)->offset != (lsn1)->offset ?					\
+    ((lsn0)->offset < (lsn1)->offset ? -1 : 1) : 0))
+
+/*******************************************************
+ * Txn.
+ *******************************************************/
+#define	DB_NONBLOCK(C)	((C)->txn != NULL && F_ISSET((C)->txn, TXN_NOWAIT))
+#define	NOWAIT_FLAG(txn) \
+	((txn) != NULL && F_ISSET((txn), TXN_NOWAIT) ? DB_LOCK_NOWAIT : 0)
+#define	IS_REAL_TXN(txn)						\
+	((txn) != NULL && !F_ISSET(txn, TXN_CDSGROUP))
+#define	IS_SUBTRANSACTION(txn)						\
+	((txn) != NULL && (txn)->parent != NULL)
+
+/*******************************************************
+ * Crypto.
+ *******************************************************/
+#define	DB_IV_BYTES     16		/* Bytes per IV */
+#define	DB_MAC_KEY	20		/* Bytes per MAC checksum */
+
+/*******************************************************
+ * Secondaries over RPC.
+ *******************************************************/
+#ifdef CONFIG_TEST
+/*
+ * These are flags passed to DB->associate calls by the Tcl API if running
+ * over RPC.  The RPC server will mask out these flags before making the real
+ * DB->associate call.
+ *
+ * These flags must coexist with the valid flags to DB->associate (currently
+ * DB_AUTO_COMMIT and DB_CREATE).  DB_AUTO_COMMIT is in the group of
+ * high-order shared flags (0xff000000), and DB_CREATE is in the low-order
+ * group (0x00000fff), so we pick a range in between.
+ */
+#define	DB_RPC2ND_MASK		0x00f00000 /* Reserved bits. */
+
+#define	DB_RPC2ND_REVERSEDATA	0x00100000 /* callback_n(0) _s_reversedata. */
+#define	DB_RPC2ND_NOOP		0x00200000 /* callback_n(1) _s_noop */
+#define	DB_RPC2ND_CONCATKEYDATA	0x00300000 /* callback_n(2) _s_concatkeydata */
+#define	DB_RPC2ND_CONCATDATAKEY 0x00400000 /* callback_n(3) _s_concatdatakey */
+#define	DB_RPC2ND_REVERSECONCAT	0x00500000 /* callback_n(4) _s_reverseconcat */
+#define	DB_RPC2ND_TRUNCDATA	0x00600000 /* callback_n(5) _s_truncdata */
+#define	DB_RPC2ND_CONSTANT	0x00700000 /* callback_n(6) _s_constant */
+#define	DB_RPC2ND_GETZIP	0x00800000 /* sj_getzip */
+#define	DB_RPC2ND_GETNAME	0x00900000 /* sj_getname */
+#endif
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*******************************************************
+ * Remaining general DB includes.
+ *******************************************************/
+
+
+#include "dbinc/globals.h"
+#include "dbinc/clock.h"
+#include "dbinc/debug.h"
+#include "dbinc/region.h"
+#include "dbinc_auto/env_ext.h"
+#include "dbinc/mutex.h"
+#ifdef HAVE_REPLICATION_THREADS
+#include "dbinc/repmgr.h"
+#endif
+#include "dbinc/rep.h"
+#include "dbinc/os.h"
+#include "dbinc_auto/clib_ext.h"
+#include "dbinc_auto/common_ext.h"
+
+/*******************************************************
+ * Remaining Log.
+ * These need to be defined after the general includes
+ * because they need rep.h from above.
+ *******************************************************/
+/*
+ * Test if the environment is currently logging changes.  If we're in recovery
+ * or we're a replication client, we don't need to log changes because they're
+ * already in the log, even though we have a fully functional log system.
+ */
+#define	DBENV_LOGGING(env)						\
+	(LOGGING_ON(env) && !IS_REP_CLIENT(env) && (!IS_RECOVERING(env)))
+
+/*
+ * Test if we need to log a change.  By default, we don't log operations without
+ * associated transactions, unless DIAGNOSTIC, DEBUG_ROP or DEBUG_WOP are on.
+ * This is because we want to get log records for read/write operations, and, if
+ * we are trying to debug something, more information is always better.
+ *
+ * The DBC_RECOVER flag is set when we're in abort, as well as during recovery;
+ * thus DBC_LOGGING may be false for a particular dbc even when DBENV_LOGGING
+ * is true.
+ *
+ * We explicitly use LOGGING_ON/IS_REP_CLIENT here because we don't want to pull
+ * in the log headers, which IS_RECOVERING (and thus DBENV_LOGGING) rely on, and
+ * because DBC_RECOVER should be set anytime IS_RECOVERING would be true.
+ *
+ * If we're not in recovery (master - doing an abort or a client applying
+ * a txn), then a client's only path through here is on an internal
+ * operation, and a master's only path through here is a transactional
+ * operation.  Detect if either is not the case.
+ */
+#if defined(DIAGNOSTIC) || defined(DEBUG_ROP)  || defined(DEBUG_WOP)
+#define	DBC_LOGGING(dbc)	__dbc_logging(dbc)
+#else
+#define	DBC_LOGGING(dbc)						\
+	((dbc)->txn != NULL && LOGGING_ON((dbc)->env) &&		\
+	    !F_ISSET((dbc), DBC_RECOVER) && !IS_REP_CLIENT((dbc)->env))
+#endif
+
+#endif /* !_DB_INT_H_ */

build_vxworks/db_load/db_load20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_load20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_load20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_load20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_load.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_load.c_dependencies
+<END>
+
+<BEGIN> FILE_db_load.c_objects
+db_load.o
+<END>
+
+<BEGIN> FILE_db_load.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_load.c
+<END>
+
+<BEGIN> userComments
+db_load
+<END>

build_vxworks/db_load/db_load22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_load22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_load22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_load22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_load22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_load.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_load.c_dependencies
+<END>
+
+<BEGIN> FILE_db_load.c_objects
+db_load.o
+<END>
+
+<BEGIN> FILE_db_load.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_load.c
+<END>
+
+<BEGIN> userComments
+db_load
+<END>

build_vxworks/db_printlog/db_printlog.c

@@ -0,0 +1,594 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_printlog.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+#include "dbinc/db_page.h"
+#include "dbinc/btree.h"
+#include "dbinc/fop.h"
+#include "dbinc/hash.h"
+#include "dbinc/log.h"
+#include "dbinc/qam.h"
+#include "dbinc/txn.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+int db_printlog_print_app_record __P((DB_ENV *, DBT *, DB_LSN *, db_recops));
+int db_printlog_env_init_print __P((ENV *, u_int32_t, DB_DISTAB *));
+int db_printlog_env_init_print_42 __P((ENV *, DB_DISTAB *));
+int db_printlog_env_init_print_43 __P((ENV *, DB_DISTAB *));
+int db_printlog_env_init_print_45 __P((ENV *, DB_DISTAB *));
+int db_printlog_lsn_arg __P((char *, DB_LSN *));
+int db_printlog_main __P((int, char *[]));
+int db_printlog_open_rep_db __P((DB_ENV *, DB **, DBC **));
+int db_printlog_usage __P((void));
+int db_printlog_version_check __P((void));
+
+const char *progname;
+
+int
+db_printlog(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_printlog", args, &argc, &argv);
+	return (db_printlog_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_printlog_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB *dbp;
+	DBC *dbc;
+	DBT data, keydbt;
+	DB_DISTAB dtab;
+	DB_ENV	*dbenv;
+	DB_LOGC *logc;
+	DB_LSN key, start, stop, verslsn;
+	ENV *env;
+	u_int32_t logcflag, newversion, version;
+	int ch, cmp, exitval, nflag, rflag, ret, repflag;
+	char *home, *passwd;
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_printlog_version_check()) != 0)
+		return (ret);
+
+	dbp = NULL;
+	dbc = NULL;
+	dbenv = NULL;
+	logc = NULL;
+	ZERO_LSN(start);
+	ZERO_LSN(stop);
+	exitval = nflag = rflag = repflag = 0;
+	home = passwd = NULL;
+
+	memset(&dtab, 0, sizeof(dtab));
+
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "b:e:h:NP:rRV")) != EOF)
+		switch (ch) {
+		case 'b':
+			/* Don't use getsubopt(3), not all systems have it. */
+			if (db_printlog_lsn_arg(optarg, &start))
+				return (db_printlog_usage());
+			break;
+		case 'e':
+			/* Don't use getsubopt(3), not all systems have it. */
+			if (db_printlog_lsn_arg(optarg, &stop))
+				return (db_printlog_usage());
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'N':
+			nflag = 1;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 'r':
+			rflag = 1;
+			break;
+		case 'R':		/* Undocumented */
+			repflag = 1;
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case '?':
+		default:
+			return (db_printlog_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc > 0)
+		return (db_printlog_usage());
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		goto shutdown;
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+
+	if (nflag) {
+		if ((ret = dbenv->set_flags(dbenv, DB_NOLOCKING, 1)) != 0) {
+			dbenv->err(dbenv, ret, "set_flags: DB_NOLOCKING");
+			goto shutdown;
+		}
+		if ((ret = dbenv->set_flags(dbenv, DB_NOPANIC, 1)) != 0) {
+			dbenv->err(dbenv, ret, "set_flags: DB_NOPANIC");
+			goto shutdown;
+		}
+	}
+
+	if (passwd != NULL && (ret = dbenv->set_encrypt(dbenv,
+	    passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto shutdown;
+	}
+
+	/*
+	 * Set up an app-specific dispatch function so that we can gracefully
+	 * handle app-specific log records.
+	 */
+	if ((ret = dbenv->set_app_dispatch(
+	    dbenv, db_printlog_print_app_record)) != 0) {
+		dbenv->err(dbenv, ret, "app_dispatch");
+		goto shutdown;
+	}
+
+	/*
+	 * An environment is required, but as all we're doing is reading log
+	 * files, we create one if it doesn't already exist.  If we create
+	 * it, create it private so it automatically goes away when we're done.
+	 * If we are reading the replication database, do not open the env
+	 * with logging, because we don't want to log the opens.
+	 */
+	if (repflag) {
+		if ((ret = dbenv->open(dbenv, home,
+		    DB_INIT_MPOOL | DB_USE_ENVIRON, 0)) != 0 &&
+		    (ret == DB_VERSION_MISMATCH ||
+		    (ret = dbenv->open(dbenv, home,
+		    DB_CREATE | DB_INIT_MPOOL | DB_PRIVATE | DB_USE_ENVIRON, 0))
+		    != 0)) {
+			dbenv->err(dbenv, ret, "DB_ENV->open");
+			goto shutdown;
+		}
+	} else if ((ret = dbenv->open(dbenv, home, DB_USE_ENVIRON, 0)) != 0 &&
+	    (ret == DB_VERSION_MISMATCH ||
+	    (ret = dbenv->open(dbenv, home,
+	    DB_CREATE | DB_INIT_LOG | DB_PRIVATE | DB_USE_ENVIRON, 0)) != 0)) {
+		dbenv->err(dbenv, ret, "DB_ENV->open");
+		goto shutdown;
+	}
+	env = dbenv->env;
+
+	/* Allocate a log cursor. */
+	if (repflag) {
+		if ((ret = db_printlog_open_rep_db(dbenv, &dbp, &dbc)) != 0)
+			goto shutdown;
+	} else if ((ret = dbenv->log_cursor(dbenv, &logc, 0)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->log_cursor");
+		goto shutdown;
+	}
+
+	if (IS_ZERO_LSN(start)) {
+		memset(&keydbt, 0, sizeof(keydbt));
+		logcflag = rflag ? DB_PREV : DB_NEXT;
+	} else {
+		key = start;
+		logcflag = DB_SET;
+	}
+	memset(&data, 0, sizeof(data));
+
+	/*
+	 * If we're using the repflag, we're immediately initializing
+	 * the print table.  Use the current version.  If we're printing
+	 * the log then initialize version to 0 so that we get the
+	 * correct version right away.
+	 */
+	if (repflag)
+		version = DB_LOGVERSION;
+	else
+		version = 0;
+	ZERO_LSN(verslsn);
+
+	/* Initialize print callbacks if repflag. */
+	if (repflag &&
+	    (ret = db_printlog_env_init_print(env, version, &dtab)) != 0) {
+		dbenv->err(dbenv, ret, "callback: initialization");
+		goto shutdown;
+	}
+	for (; !__db_util_interrupted(); logcflag = rflag ? DB_PREV : DB_NEXT) {
+		if (repflag) {
+			ret = dbc->get(dbc, &keydbt, &data, logcflag);
+			if (ret == 0)
+				key = ((__rep_control_args *)keydbt.data)->lsn;
+		} else
+			ret = logc->get(logc, &key, &data, logcflag);
+		if (ret != 0) {
+			if (ret == DB_NOTFOUND)
+				break;
+			dbenv->err(dbenv,
+			    ret, repflag ? "DBC->get" : "DB_LOGC->get");
+			goto shutdown;
+		}
+
+		/*
+		 * We may have reached the end of the range we're displaying.
+		 */
+		if (!IS_ZERO_LSN(stop)) {
+			cmp = LOG_COMPARE(&key, &stop);
+			if ((rflag && cmp < 0) || (!rflag && cmp > 0))
+				break;
+		}
+		if (!repflag && key.file != verslsn.file) {
+			/*
+			 * If our log file changed, we need to see if the
+			 * version of the log file changed as well.
+			 * If it changed, reset the print table.
+			 */
+			if ((ret = logc->version(logc, &newversion, 0)) != 0) {
+				dbenv->err(dbenv, ret, "DB_LOGC->version");
+				goto shutdown;
+			}
+			if (version != newversion) {
+				version = newversion;
+				if ((ret = db_printlog_env_init_print(env, version,
+				    &dtab)) != 0) {
+					dbenv->err(dbenv, ret,
+					    "callback: initialization");
+					goto shutdown;
+				}
+			}
+		}
+
+		ret = __db_dispatch(dbenv->env,
+		    &dtab, &data, &key, DB_TXN_PRINT, NULL);
+
+		/*
+		 * XXX
+		 * Just in case the underlying routines don't flush.
+		 */
+		(void)fflush(stdout);
+
+		if (ret != 0) {
+			dbenv->err(dbenv, ret, "tx: dispatch");
+			goto shutdown;
+		}
+	}
+
+	if (0) {
+shutdown:	exitval = 1;
+	}
+	if (logc != NULL && (ret = logc->close(logc, 0)) != 0)
+		exitval = 1;
+
+	if (dbc != NULL && (ret = dbc->close(dbc)) != 0)
+		exitval = 1;
+
+	if (dbp != NULL && (ret = dbp->close(dbp, 0)) != 0)
+		exitval = 1;
+
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+/*
+ * env_init_print --
+ */
+int
+db_printlog_env_init_print(env, version, dtabp)
+	ENV *env;
+	u_int32_t version;
+	DB_DISTAB *dtabp;
+{
+	int ret;
+
+	/*
+	 * We need to prime the print table with the current print
+	 * functions.  Then we overwrite only specific entries based on
+	 * each previous version we support.
+	 */
+	if ((ret = db_printlog_env_init_print_45(env, dtabp)) != 0)
+		return (ret);
+
+	switch (version) {
+	/*
+	 * There are no log record/recovery differences between
+	 * 4.4 and 4.5.  The log version changed due to checksum.
+	 * There are no log recovery differences between
+	 * 4.5 and 4.6.  The name of the rep_gen in txn_checkpoint
+	 * changed (to spare, since we don't use it anymore).
+	 */
+	case DB_LOGVERSION_47:
+	case DB_LOGVERSION_46:
+	case DB_LOGVERSION_45:
+	case DB_LOGVERSION_44:
+		ret = 0;
+		break;
+	case DB_LOGVERSION_43:
+		ret = db_printlog_env_init_print_43(env, dtabp);
+		break;
+	case DB_LOGVERSION_42:
+		ret = db_printlog_env_init_print_42(env, dtabp);
+		break;
+	default:
+		env->dbenv->errx(env->dbenv,
+		    "Unknown version %lu", (u_long)version);
+		ret = EINVAL;
+		break;
+	}
+	return (ret);
+}
+
+int
+db_printlog_env_init_print_42(env, dtabp)
+	ENV *env;
+	DB_DISTAB *dtabp;
+{
+	int ret;
+
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __db_relink_42_print, DB___db_relink_42)) != 0)
+		goto err;
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __db_pg_alloc_42_print, DB___db_pg_alloc_42)) != 0)
+		goto err;
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __db_pg_free_42_print, DB___db_pg_free_42)) != 0)
+		goto err;
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __db_pg_freedata_42_print, DB___db_pg_freedata_42)) != 0)
+		goto err;
+#if HAVE_HASH
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __ham_metagroup_42_print, DB___ham_metagroup_42)) != 0)
+		goto err;
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __ham_groupalloc_42_print, DB___ham_groupalloc_42)) != 0)
+		goto err;
+#endif
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __txn_ckp_42_print, DB___txn_ckp_42)) != 0)
+		goto err;
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __txn_regop_42_print, DB___txn_regop_42)) != 0)
+		goto err;
+err:
+	return (ret);
+}
+
+int
+db_printlog_env_init_print_43(env, dtabp)
+	ENV *env;
+	DB_DISTAB *dtabp;
+{
+	int ret;
+
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __bam_relink_43_print, DB___bam_relink_43)) != 0)
+		goto err;
+	/*
+	 * We want to use the 4.2-based txn_regop record.
+	 */
+	if ((ret = __db_add_recovery_int(env, dtabp,
+	    __txn_regop_42_print, DB___txn_regop_42)) != 0)
+		goto err;
+err:
+	return (ret);
+}
+
+/*
+ * env_init_print_45 --
+ *
+ */
+int
+db_printlog_env_init_print_45(env, dtabp)
+	ENV *env;
+	DB_DISTAB *dtabp;
+{
+	int ret;
+
+	if ((ret = __bam_init_print(env, dtabp)) != 0)
+		goto err;
+	if ((ret = __crdel_init_print(env, dtabp)) != 0)
+		goto err;
+	if ((ret = __db_init_print(env, dtabp)) != 0)
+		goto err;
+	if ((ret = __dbreg_init_print(env, dtabp)) != 0)
+		goto err;
+	if ((ret = __fop_init_print(env, dtabp)) != 0)
+		goto err;
+#ifdef HAVE_HASH
+	if ((ret = __ham_init_print(env, dtabp)) != 0)
+		goto err;
+#endif
+#ifdef HAVE_QUEUE
+	if ((ret = __qam_init_print(env, dtabp)) != 0)
+		goto err;
+#endif
+	if ((ret = __txn_init_print(env, dtabp)) != 0)
+		goto err;
+err:
+	return (ret);
+}
+
+int
+db_printlog_usage()
+{
+	fprintf(stderr, "usage: %s %s\n", progname,
+	    "[-NrV] [-b file/offset] [-e file/offset] [-h home] [-P password]");
+	return (EXIT_FAILURE);
+}
+
+int
+db_printlog_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}
+
+/* Print an unknown, application-specific log record as best we can. */
+int
+db_printlog_print_app_record(dbenv, dbt, lsnp, op)
+	DB_ENV *dbenv;
+	DBT *dbt;
+	DB_LSN *lsnp;
+	db_recops op;
+{
+	u_int32_t i, rectype;
+	int ch;
+
+	DB_ASSERT(dbenv->env, op == DB_TXN_PRINT);
+
+	COMPQUIET(dbenv, NULL);
+	COMPQUIET(op, DB_TXN_PRINT);
+
+	/*
+	 * Fetch the rectype, which always must be at the beginning of the
+	 * record (if dispatching is to work at all).
+	 */
+	memcpy(&rectype, dbt->data, sizeof(rectype));
+
+	/*
+	 * Applications may wish to customize the output here based on the
+	 * rectype.  We just print the entire log record in the generic
+	 * mixed-hex-and-printable format we use for binary data.
+	 */
+	printf("[%lu][%lu]application specific record: rec: %lu\n",
+	    (u_long)lsnp->file, (u_long)lsnp->offset, (u_long)rectype);
+	printf("\tdata: ");
+	for (i = 0; i < dbt->size; i++) {
+		ch = ((u_int8_t *)dbt->data)[i];
+		printf(isprint(ch) || ch == 0x0a ? "%c" : "%#x ", ch);
+	}
+	printf("\n\n");
+
+	return (0);
+}
+
+int
+db_printlog_open_rep_db(dbenv, dbpp, dbcp)
+	DB_ENV *dbenv;
+	DB **dbpp;
+	DBC **dbcp;
+{
+	int ret;
+
+	DB *dbp;
+	*dbpp = NULL;
+	*dbcp = NULL;
+
+	if ((ret = db_create(dbpp, dbenv, 0)) != 0) {
+		dbenv->err(dbenv, ret, "db_create");
+		return (ret);
+	}
+
+	dbp = *dbpp;
+	if ((ret =
+	    dbp->open(dbp, NULL, REPDBNAME, NULL, DB_BTREE, 0, 0)) != 0) {
+		dbenv->err(dbenv, ret, "DB->open");
+		goto err;
+	}
+
+	if ((ret = dbp->cursor(dbp, NULL, dbcp, 0)) != 0) {
+		dbenv->err(dbenv, ret, "DB->cursor");
+		goto err;
+	}
+
+	return (0);
+
+err:	if (*dbpp != NULL)
+		(void)(*dbpp)->close(*dbpp, 0);
+	return (ret);
+}
+
+/*
+ * lsn_arg --
+ *	Parse a LSN argument.
+ */
+int
+db_printlog_lsn_arg(arg, lsnp)
+	char *arg;
+	DB_LSN *lsnp;
+{
+	u_long uval;
+	char *p;
+
+	/*
+	 * Expected format is: lsn.file/lsn.offset.
+	 */
+	if ((p = strchr(arg, '/')) == NULL)
+		return (1);
+	*p = '\0';
+
+	if (__db_getulong(NULL, progname, arg, 0, UINT32_MAX, &uval))
+		return (1);
+	lsnp->file = uval;
+	if (__db_getulong(NULL, progname, p + 1, 0, UINT32_MAX, &uval))
+		return (1);
+	lsnp->offset = uval;
+	return (0);
+}

build_vxworks/db_printlog/db_printlog20.wpj

@@ -0,0 +1,286 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_printlog20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_printlog20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_printlog20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_objects
+btree_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_objects
+crdel_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_objects
+db_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_db_printlog.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_printlog.c_dependencies
+<END>
+
+<BEGIN> FILE_db_printlog.c_objects
+db_printlog.o
+<END>
+
+<BEGIN> FILE_db_printlog.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_objects
+dbreg_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_objects
+fileops_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_objects
+hash_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_objects
+qam_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_objects
+txn_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/../../btree/btree_autop.c \
+$(PRJ_DIR)/../../db/crdel_autop.c \
+$(PRJ_DIR)/../../db/db_autop.c \
+$(PRJ_DIR)/db_printlog.c \
+$(PRJ_DIR)/../../dbreg/dbreg_autop.c \
+$(PRJ_DIR)/../../fileops/fileops_autop.c \
+$(PRJ_DIR)/../../hash/hash_autop.c \
+$(PRJ_DIR)/../../qam/qam_autop.c \
+$(PRJ_DIR)/../../txn/txn_autop.c
+<END>
+
+<BEGIN> userComments
+db_printlog
+<END>

build_vxworks/db_printlog/db_printlog22.wpj

@@ -0,0 +1,320 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_printlog22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_printlog22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_printlog22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_printlog22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_objects
+btree_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../btree/btree_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_objects
+crdel_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/crdel_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_objects
+db_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../db/db_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_db_printlog.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_printlog.c_dependencies
+<END>
+
+<BEGIN> FILE_db_printlog.c_objects
+db_printlog.o
+<END>
+
+<BEGIN> FILE_db_printlog.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_objects
+dbreg_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../dbreg/dbreg_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_objects
+fileops_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../fileops/fileops_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_objects
+hash_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../hash/hash_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_objects
+qam_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../qam/qam_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_dependencies
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_objects
+txn_autop.o
+<END>
+
+<BEGIN> FILE_$(PRJ_DIR)/../../txn/txn_autop.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/../../btree/btree_autop.c \
+$(PRJ_DIR)/../../db/crdel_autop.c \
+$(PRJ_DIR)/../../db/db_autop.c \
+$(PRJ_DIR)/db_printlog.c \
+$(PRJ_DIR)/../../dbreg/dbreg_autop.c \
+$(PRJ_DIR)/../../fileops/fileops_autop.c \
+$(PRJ_DIR)/../../hash/hash_autop.c \
+$(PRJ_DIR)/../../qam/qam_autop.c \
+$(PRJ_DIR)/../../txn/txn_autop.c
+<END>
+
+<BEGIN> userComments
+db_printlog
+<END>

build_vxworks/db_recover/db_recover.c

@@ -0,0 +1,328 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_recover.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+void db_recover_feedback __P((DB_ENV *, int, int));
+int  db_recover_main __P((int, char *[]));
+int  db_recover_read_timestamp __P((char *, time_t *));
+int  db_recover_usage __P((void));
+int  db_recover_version_check __P((void));
+
+const char *progname;
+int newline_needed;
+
+int
+db_recover(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_recover", args, &argc, &argv);
+	return (db_recover_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_recover_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB_ENV	*dbenv;
+	time_t timestamp;
+	u_int32_t flags;
+	int ch, exitval, fatal_recover, ret, retain_env, set_feedback, verbose;
+	char *home, *passwd;
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_recover_version_check()) != 0)
+		return (ret);
+
+	home = passwd = NULL;
+	timestamp = 0;
+	exitval = fatal_recover = retain_env = set_feedback = verbose = 0;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "cefh:P:t:Vv")) != EOF)
+		switch (ch) {
+		case 'c':
+			fatal_recover = 1;
+			break;
+		case 'e':
+			retain_env = 1;
+			break;
+		case 'f':
+			set_feedback = 1;
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 't':
+			if ((ret = db_recover_read_timestamp(optarg, &timestamp)) != 0)
+				return (ret);
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case 'v':
+			verbose = 1;
+			break;
+		case '?':
+		default:
+			return (db_recover_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	if (argc != 0)
+		return (db_recover_usage());
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		return (EXIT_FAILURE);
+	}
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+	if (set_feedback)
+		(void)dbenv->set_feedback(dbenv, db_recover_feedback);
+	if (verbose)
+		(void)dbenv->set_verbose(dbenv, DB_VERB_RECOVERY, 1);
+	if (timestamp &&
+	    (ret = dbenv->set_tx_timestamp(dbenv, &timestamp)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->set_timestamp");
+		goto shutdown;
+	}
+
+	if (passwd != NULL && (ret = dbenv->set_encrypt(dbenv,
+	    passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto shutdown;
+	}
+
+	/*
+	 * Initialize the environment -- we don't actually do anything
+	 * else, that all that's needed to run recovery.
+	 *
+	 * Note that unless the caller specified the -e option, we use a
+	 * private environment, as we're about to create a region, and we
+	 * don't want to to leave it around.  If we leave the region around,
+	 * the application that should create it will simply join it instead,
+	 * and will then be running with incorrectly sized (and probably
+	 * terribly small) caches.  Applications that use -e should almost
+	 * certainly use DB_CONFIG files in the directory.
+	 */
+	flags = 0;
+	LF_SET(DB_CREATE | DB_INIT_LOG |
+	    DB_INIT_MPOOL | DB_INIT_TXN | DB_USE_ENVIRON);
+	LF_SET(fatal_recover ? DB_RECOVER_FATAL : DB_RECOVER);
+	LF_SET(retain_env ? DB_INIT_LOCK : DB_PRIVATE);
+	if ((ret = dbenv->open(dbenv, home, flags, 0)) != 0) {
+		dbenv->err(dbenv, ret, "DB_ENV->open");
+		goto shutdown;
+	}
+
+	if (0) {
+shutdown:	exitval = 1;
+	}
+
+	/* Flush to the next line of the output device. */
+	if (newline_needed)
+		printf("\n");
+
+	/* Clean up the environment. */
+	if ((ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+/*
+ * db_recover_feedback --
+ *	Provide feedback on recovery progress.
+ */
+void
+db_recover_feedback(dbenv, opcode, percent)
+	DB_ENV *dbenv;
+	int opcode;
+	int percent;
+{
+	COMPQUIET(dbenv, NULL);
+
+	if (opcode == DB_RECOVER) {
+		printf("\rrecovery %d%% complete", percent);
+		(void)fflush(stdout);
+		newline_needed = 1;
+	}
+}
+
+#define	ATOI2(ar)	((ar)[0] - '0') * 10 + ((ar)[1] - '0'); (ar) += 2;
+
+/*
+ * read_timestamp --
+ *	Convert a time argument to Epoch seconds.
+ *
+ * Copyright (c) 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+int
+db_recover_read_timestamp(arg, timep)
+	char *arg;
+	time_t *timep;
+{
+	struct tm *t;
+	time_t now;
+	int yearset;
+	char *p;
+					/* Start with the current time. */
+	(void)time(&now);
+	if ((t = localtime(&now)) == NULL) {
+		fprintf(stderr,
+		    "%s: localtime: %s\n", progname, strerror(errno));
+		return (EXIT_FAILURE);
+	}
+					/* [[CC]YY]MMDDhhmm[.SS] */
+	if ((p = strchr(arg, '.')) == NULL)
+		t->tm_sec = 0;		/* Seconds defaults to 0. */
+	else {
+		if (strlen(p + 1) != 2)
+			goto terr;
+		*p++ = '\0';
+		t->tm_sec = ATOI2(p);
+	}
+
+	yearset = 0;
+	switch (strlen(arg)) {
+	case 12:			/* CCYYMMDDhhmm */
+		t->tm_year = ATOI2(arg);
+		t->tm_year *= 100;
+		yearset = 1;
+		/* FALLTHROUGH */
+	case 10:			/* YYMMDDhhmm */
+		if (yearset) {
+			yearset = ATOI2(arg);
+			t->tm_year += yearset;
+		} else {
+			yearset = ATOI2(arg);
+			if (yearset < 69)
+				t->tm_year = yearset + 2000;
+			else
+				t->tm_year = yearset + 1900;
+		}
+		t->tm_year -= 1900;	/* Convert to UNIX time. */
+		/* FALLTHROUGH */
+	case 8:				/* MMDDhhmm */
+		t->tm_mon = ATOI2(arg);
+		--t->tm_mon;		/* Convert from 01-12 to 00-11 */
+		t->tm_mday = ATOI2(arg);
+		t->tm_hour = ATOI2(arg);
+		t->tm_min = ATOI2(arg);
+		break;
+	default:
+		goto terr;
+	}
+
+	t->tm_isdst = -1;		/* Figure out DST. */
+
+	*timep = mktime(t);
+	if (*timep == -1) {
+terr:		fprintf(stderr,
+	"%s: out of range or illegal time specification: [[CC]YY]MMDDhhmm[.SS]",
+		    progname);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}
+
+int
+db_recover_usage()
+{
+	(void)fprintf(stderr, "usage: %s %s\n", progname,
+	    "[-cefVv] [-h home] [-P password] [-t [[CC]YY]MMDDhhmm[.SS]]");
+	return (EXIT_FAILURE);
+}
+
+int
+db_recover_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_recover/db_recover20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_recover20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_recover20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_recover20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_recover.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_recover.c_dependencies
+<END>
+
+<BEGIN> FILE_db_recover.c_objects
+db_recover.o
+<END>
+
+<BEGIN> FILE_db_recover.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_recover.c
+<END>
+
+<BEGIN> userComments
+db_recover
+<END>

build_vxworks/db_recover/db_recover22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_recover22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_recover22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_recover22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_recover22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_recover.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_recover.c_dependencies
+<END>
+
+<BEGIN> FILE_db_recover.c_objects
+db_recover.o
+<END>
+
+<BEGIN> FILE_db_recover.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_recover.c
+<END>
+
+<BEGIN> userComments
+db_recover
+<END>

build_vxworks/db_stat/db_stat.c

@@ -0,0 +1,474 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_stat.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include "db_config.h"
+
+#include "db_int.h"
+
+#ifndef lint
+static const char copyright[] =
+    "Copyright (c) 1996,2008 Oracle.  All rights reserved.\n";
+#endif
+
+typedef enum { T_NOTSET, T_DB,
+    T_ENV, T_LOCK, T_LOG, T_MPOOL, T_MUTEX, T_REP, T_TXN } test_t;
+
+int	 db_stat_db_init __P((DB_ENV *, char *, test_t, u_int32_t, int *));
+int	 db_stat_main __P((int, char *[]));
+int	 db_stat_usage __P((void));
+int	 db_stat_version_check __P((void));
+
+const char *progname;
+
+int
+db_stat(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("db_stat", args, &argc, &argv);
+	return (db_stat_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+db_stat_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern char *optarg;
+	extern int optind, __db_getopt_reset;
+	DB_ENV	*dbenv;
+	DB *dbp;
+	test_t ttype;
+	u_int32_t cache, flags;
+	int ch, exitval;
+	int nflag, private, resize, ret;
+	char *db, *home, *p, *passwd, *subdb;
+
+	if ((progname = __db_rpath(argv[0])) == NULL)
+		progname = argv[0];
+	else
+		++progname;
+
+	if ((ret = db_stat_version_check()) != 0)
+		return (ret);
+
+	dbenv = NULL;
+	dbp = NULL;
+	ttype = T_NOTSET;
+	cache = MEGABYTE;
+	exitval = flags = nflag = private = 0;
+	db = home = passwd = subdb = NULL;
+
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc,
+	    argv, "C:cd:Eefgh:L:lM:mNP:R:rs:tVxX:Z")) != EOF)
+		switch (ch) {
+		case 'C': case 'c':
+			if (ttype != T_NOTSET && ttype != T_LOCK)
+				goto argcombo;
+			ttype = T_LOCK;
+			if (ch != 'c')
+				for (p = optarg; *p; ++p)
+					switch (*p) {
+					case 'A':
+						LF_SET(DB_STAT_ALL);
+						break;
+					case 'c':
+						LF_SET(DB_STAT_LOCK_CONF);
+						break;
+					case 'l':
+						LF_SET(DB_STAT_LOCK_LOCKERS);
+						break;
+					case 'm': /* Backward compatible. */
+						break;
+					case 'o':
+						LF_SET(DB_STAT_LOCK_OBJECTS);
+						break;
+					case 'p':
+						LF_SET(DB_STAT_LOCK_PARAMS);
+						break;
+					default:
+						return (db_stat_usage());
+					}
+			break;
+		case 'd':
+			if (ttype != T_NOTSET && ttype != T_DB)
+				goto argcombo;
+			ttype = T_DB;
+			db = optarg;
+			break;
+		case 'E': case 'e':
+			if (ttype != T_NOTSET && ttype != T_ENV)
+				goto argcombo;
+			ttype = T_ENV;
+			LF_SET(DB_STAT_SUBSYSTEM);
+			if (ch == 'E')
+				LF_SET(DB_STAT_ALL);
+			break;
+		case 'f':
+			if (ttype != T_NOTSET && ttype != T_DB)
+				goto argcombo;
+			ttype = T_DB;
+			LF_SET(DB_FAST_STAT);
+			break;
+		case 'h':
+			home = optarg;
+			break;
+		case 'L': case 'l':
+			if (ttype != T_NOTSET && ttype != T_LOG)
+				goto argcombo;
+			ttype = T_LOG;
+			if (ch != 'l')
+				for (p = optarg; *p; ++p)
+					switch (*p) {
+					case 'A':
+						LF_SET(DB_STAT_ALL);
+						break;
+					default:
+						return (db_stat_usage());
+					}
+			break;
+		case 'M': case 'm':
+			if (ttype != T_NOTSET && ttype != T_MPOOL)
+				goto argcombo;
+			ttype = T_MPOOL;
+			if (ch != 'm')
+				for (p = optarg; *p; ++p)
+					switch (*p) {
+					case 'A':
+						LF_SET(DB_STAT_ALL);
+						break;
+					case 'h':
+						LF_SET(DB_STAT_MEMP_HASH);
+						break;
+					case 'm': /* Backward compatible. */
+						break;
+					default:
+						return (db_stat_usage());
+					}
+			break;
+		case 'N':
+			nflag = 1;
+			break;
+		case 'P':
+			passwd = strdup(optarg);
+			memset(optarg, 0, strlen(optarg));
+			if (passwd == NULL) {
+				fprintf(stderr, "%s: strdup: %s\n",
+				    progname, strerror(errno));
+				return (EXIT_FAILURE);
+			}
+			break;
+		case 'R': case 'r':
+			if (ttype != T_NOTSET && ttype != T_REP)
+				goto argcombo;
+			ttype = T_REP;
+			if (ch != 'r')
+				for (p = optarg; *p; ++p)
+					switch (*p) {
+					case 'A':
+						LF_SET(DB_STAT_ALL);
+						break;
+					default:
+						return (db_stat_usage());
+					}
+			break;
+		case 's':
+			if (ttype != T_NOTSET && ttype != T_DB)
+				goto argcombo;
+			ttype = T_DB;
+			subdb = optarg;
+			break;
+		case 't':
+			if (ttype != T_NOTSET) {
+argcombo:			fprintf(stderr,
+				    "%s: illegal option combination\n",
+				    progname);
+				return (db_stat_usage());
+			}
+			ttype = T_TXN;
+			break;
+		case 'V':
+			printf("%s\n", db_version(NULL, NULL, NULL));
+			return (EXIT_SUCCESS);
+		case 'X': case 'x':
+			if (ttype != T_NOTSET && ttype != T_MUTEX)
+				goto argcombo;
+			ttype = T_MUTEX;
+			if (ch != 'x')
+				for (p = optarg; *p; ++p)
+					switch (*p) {
+						case 'A':
+							LF_SET(DB_STAT_ALL);
+							break;
+						default:
+							return (db_stat_usage());
+					}
+			break;
+		case 'Z':
+			LF_SET(DB_STAT_CLEAR);
+			break;
+		case '?':
+		default:
+			return (db_stat_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	switch (ttype) {
+	case T_DB:
+		if (db == NULL)
+			return (db_stat_usage());
+		break;
+	case T_ENV:
+	case T_LOCK:
+	case T_LOG:
+	case T_MPOOL:
+	case T_MUTEX:
+	case T_REP:
+	case T_TXN:
+		break;
+	case T_NOTSET:
+		return (db_stat_usage());
+	}
+
+	/* Handle possible interruptions. */
+	__db_util_siginit();
+
+	/*
+	 * Create an environment object and initialize it for error
+	 * reporting.
+	 */
+retry:	if ((ret = db_env_create(&dbenv, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_env_create: %s\n", progname, db_strerror(ret));
+		goto err;
+	}
+
+	dbenv->set_errfile(dbenv, stderr);
+	dbenv->set_errpfx(dbenv, progname);
+
+	if (nflag) {
+		if ((ret = dbenv->set_flags(dbenv, DB_NOLOCKING, 1)) != 0) {
+			dbenv->err(dbenv, ret, "set_flags: DB_NOLOCKING");
+			goto err;
+		}
+		if ((ret = dbenv->set_flags(dbenv, DB_NOPANIC, 1)) != 0) {
+			dbenv->err(dbenv, ret, "set_flags: DB_NOPANIC");
+			goto err;
+		}
+	}
+
+	if (passwd != NULL &&
+	    (ret = dbenv->set_encrypt(dbenv, passwd, DB_ENCRYPT_AES)) != 0) {
+		dbenv->err(dbenv, ret, "set_passwd");
+		goto err;
+	}
+
+	/* Initialize the environment. */
+	if (db_stat_db_init(dbenv, home, ttype, cache, &private) != 0)
+		goto err;
+
+	switch (ttype) {
+	case T_DB:
+		/* Create the DB object and open the file. */
+		if ((ret = db_create(&dbp, dbenv, 0)) != 0) {
+			dbenv->err(dbenv, ret, "db_create");
+			goto err;
+		}
+
+		/*
+		 * We open the database for writing so we can update the cached
+		 * statistics, but it's OK to fail, we can open read-only and
+		 * proceed.
+		 *
+		 * Turn off error messages for now -- we can't open lots of
+		 * databases read-write (for example, master databases and
+		 * hash databases for which we don't know the hash function).
+		 */
+		dbenv->set_errfile(dbenv, NULL);
+		ret = dbp->open(dbp, NULL, db, subdb, DB_UNKNOWN, 0, 0);
+		dbenv->set_errfile(dbenv, stderr);
+		if (ret != 0 && (ret = dbp->open(
+		    dbp, NULL, db, subdb, DB_UNKNOWN, DB_RDONLY, 0)) != 0) {
+			dbenv->err(dbenv, ret, "DB->open: %s", db);
+			goto err;
+		}
+
+		/* Check if cache is too small for this DB's pagesize. */
+		if (private) {
+			if ((ret = __db_util_cache(dbp, &cache, &resize)) != 0)
+				goto err;
+			if (resize) {
+				(void)dbp->close(dbp, DB_NOSYNC);
+				dbp = NULL;
+
+				(void)dbenv->close(dbenv, 0);
+				dbenv = NULL;
+				goto retry;
+			}
+		}
+
+		if (dbp->stat_print(dbp, flags))
+			goto err;
+		break;
+	case T_ENV:
+		if (dbenv->stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_LOCK:
+		if (dbenv->lock_stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_LOG:
+		if (dbenv->log_stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_MPOOL:
+		if (dbenv->memp_stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_MUTEX:
+		if (dbenv->mutex_stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_REP:
+#ifdef HAVE_REPLICATION_THREADS
+		if (dbenv->repmgr_stat_print(dbenv, flags))
+			goto err;
+#endif
+		if (dbenv->rep_stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_TXN:
+		if (dbenv->txn_stat_print(dbenv, flags))
+			goto err;
+		break;
+	case T_NOTSET:
+		dbenv->errx(dbenv, "Unknown statistics flag");
+		goto err;
+	}
+
+	if (0) {
+err:		exitval = 1;
+	}
+	if (dbp != NULL && (ret = dbp->close(dbp, DB_NOSYNC)) != 0) {
+		exitval = 1;
+		dbenv->err(dbenv, ret, "close");
+	}
+	if (dbenv != NULL && (ret = dbenv->close(dbenv, 0)) != 0) {
+		exitval = 1;
+		fprintf(stderr,
+		    "%s: dbenv->close: %s\n", progname, db_strerror(ret));
+	}
+
+	if (passwd != NULL)
+		free(passwd);
+
+	/* Resend any caught signal. */
+	__db_util_sigresend();
+
+	return (exitval == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
+
+/*
+ * db_init --
+ *	Initialize the environment.
+ */
+int
+db_stat_db_init(dbenv, home, ttype, cache, is_private)
+	DB_ENV *dbenv;
+	char *home;
+	test_t ttype;
+	u_int32_t cache;
+	int *is_private;
+{
+	u_int32_t oflags;
+	int ret;
+
+	/*
+	 * If our environment open fails, and we're trying to look at a
+	 * shared region, it's a hard failure.
+	 *
+	 * We will probably just drop core if the environment we join does
+	 * not include a memory pool.  This is probably acceptable; trying
+	 * to use an existing environment that does not contain a memory
+	 * pool to look at a database can be safely construed as operator
+	 * error, I think.
+	 */
+	*is_private = 0;
+	if ((ret = dbenv->open(dbenv, home, DB_USE_ENVIRON, 0)) == 0)
+		return (0);
+	if (ret == DB_VERSION_MISMATCH)
+		goto err;
+	if (ttype != T_DB && ttype != T_LOG) {
+		dbenv->err(dbenv, ret, "DB_ENV->open%s%s",
+		    home == NULL ? "" : ": ", home == NULL ? "" : home);
+		return (1);
+	}
+
+	/*
+	 * We're looking at a database or set of log files and no environment
+	 * exists.  Create one, but make it private so no files are actually
+	 * created.  Declare a reasonably large cache so that we don't fail
+	 * when reporting statistics on large databases.
+	 *
+	 * An environment is required to look at databases because we may be
+	 * trying to look at databases in directories other than the current
+	 * one.
+	 */
+	if ((ret = dbenv->set_cachesize(dbenv, 0, cache, 1)) != 0) {
+		dbenv->err(dbenv, ret, "set_cachesize");
+		return (1);
+	}
+	*is_private = 1;
+	oflags = DB_CREATE | DB_PRIVATE | DB_USE_ENVIRON;
+	if (ttype == T_DB)
+		oflags |= DB_INIT_MPOOL;
+	if (ttype == T_LOG)
+		oflags |= DB_INIT_LOG;
+	if ((ret = dbenv->open(dbenv, home, oflags, 0)) == 0)
+		return (0);
+
+	/* An environment is required. */
+err:	dbenv->err(dbenv, ret, "DB_ENV->open");
+	return (1);
+}
+
+int
+db_stat_usage()
+{
+	fprintf(stderr, "usage: %s %s\n", progname,
+	    "-d file [-fN] [-h home] [-P password] [-s database]");
+	fprintf(stderr, "usage: %s %s\n\t%s\n", progname,
+	    "[-cEelmNrtVxZ] [-C Aclop]",
+	    "[-h home] [-L A] [-M A] [-P password] [-R A] [-X A]");
+	return (EXIT_FAILURE);
+}
+
+int
+db_stat_version_check()
+{
+	int v_major, v_minor, v_patch;
+
+	/* Make sure we're loaded with the right version of the DB library. */
+	(void)db_version(&v_major, &v_minor, &v_patch);
+	if (v_major != DB_VERSION_MAJOR || v_minor != DB_VERSION_MINOR) {
+		fprintf(stderr,
+	"%s: version %d.%d doesn't match library version %d.%d\n",
+		    progname, DB_VERSION_MAJOR, DB_VERSION_MINOR,
+		    v_major, v_minor);
+		return (EXIT_FAILURE);
+	}
+	return (0);
+}

build_vxworks/db_stat/db_stat20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+db_stat20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/db_stat20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_stat20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_db_stat.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_stat.c_dependencies
+<END>
+
+<BEGIN> FILE_db_stat.c_objects
+db_stat.o
+<END>
+
+<BEGIN> FILE_db_stat.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_stat.c
+<END>
+
+<BEGIN> userComments
+db_stat
+<END>

build_vxworks/db_stat/db_stat22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+db_stat22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/db_stat22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_db_stat22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_db_stat22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_db_stat.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_db_stat.c_dependencies
+<END>
+
+<BEGIN> FILE_db_stat.c_objects
+db_stat.o
+<END>
+
+<BEGIN> FILE_db_stat.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/db_stat.c
+<END>
+
+<BEGIN> userComments
+db_stat
+<END>

build_vxworks/dbdemo/README

@@ -0,0 +1,39 @@
+This README describes the steps needed to run a demo example of BerkeleyDB.
+
+1. Read the pages in the Reference Guide that describe building
+   BerkeleyDB on VxWorks:
+
+	$(WIND_BASE)/target/src/BerkeleyDB/docs/ref/build_vxworks/intro.html
+	$(WIND_BASE)/target/src/BerkeleyDB/docs/ref/build_vxworks/notes.html
+	$(WIND_BASE)/target/src/BerkeleyDB/docs/ref/build_vxworks/faq.html
+
+2. Launch Tornado 2.0 and open up the BerkeleyDB project.
+
+3. Add the demo project to that workspace:
+
+	$(WIND_BASE)/target/src/BerkeleyDB/build_vxworks/demo/dbdemo.wpj
+
+4. Build BerkeleyDB as described in the Reference Guide.
+
+5. Build the dbdemo project.
+
+6. Download BerkeleyDB onto the target.
+
+7. Download the dbdemo project onto the target.
+
+8. Open a windsh to the target and run the demo:
+
+	-> dbdemo "<pathname>/<dbname>"
+
+   Where pathname is a pathname string pointing to a directory that the
+   demo can create a database in.  That directory should already exist.
+   The dbname is the name for the database.  For example:
+
+	-> dbdemo "/tmp/demo.db"
+
+9. The demo program will ask for input.  You can type in any string.
+   The program will add an entry to the database with that string as
+   the key and the reverse of that string as the data item for that key.
+   It will continue asking for input until you hit ^D or enter "quit".
+   Upon doing so, the demo program will display all the keys you have
+   entered as input and their data items.

build_vxworks/dbdemo/dbdemo.c

@@ -0,0 +1,177 @@
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1997,2008 Oracle.  All rights reserved.
+ *
+ * $Id: dbdemo.c 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#include <sys/types.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifdef _WIN32
+extern int getopt(int, char * const *, const char *);
+#else
+#include <unistd.h>
+#endif
+
+#include <db_config.h>
+#include <db_int.h>
+
+#define	DATABASE	"access.db"
+int dbdemo_main __P((int, char *[]));
+int dbdemo_usage __P((void));
+
+int
+dbdemo(args)
+	char *args;
+{
+	int argc;
+	char **argv;
+
+	__db_util_arg("dbdemo", args, &argc, &argv);
+	return (dbdemo_main(argc, argv) ? EXIT_FAILURE : EXIT_SUCCESS);
+}
+
+#include <stdio.h>
+#define	ERROR_RETURN	ERROR
+
+int
+dbdemo_main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	extern int optind, __db_getopt_reset;
+	DB *dbp;
+	DBC *dbcp;
+	DBT key, data;
+	size_t len;
+	int ch, ret, rflag;
+	char *database, *p, *t, buf[1024], rbuf[1024];
+	const char *progname = "dbdemo";		/* Program name. */
+
+	rflag = 0;
+	__db_getopt_reset = 1;
+	while ((ch = getopt(argc, argv, "r")) != EOF)
+		switch (ch) {
+		case 'r':
+			rflag = 1;
+			break;
+		case '?':
+		default:
+			return (dbdemo_usage());
+		}
+	argc -= optind;
+	argv += optind;
+
+	/* Accept optional database name. */
+	database = *argv == NULL ? DATABASE : argv[0];
+
+	/* Optionally discard the database. */
+	if (rflag)
+		(void)remove(database);
+
+	/* Create and initialize database object, open the database. */
+	if ((ret = db_create(&dbp, NULL, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: db_create: %s\n", progname, db_strerror(ret));
+		return (EXIT_FAILURE);
+	}
+	dbp->set_errfile(dbp, stderr);
+	dbp->set_errpfx(dbp, progname);
+	if ((ret = dbp->set_pagesize(dbp, 1024)) != 0) {
+		dbp->err(dbp, ret, "set_pagesize");
+		goto err1;
+	}
+	if ((ret = dbp->set_cachesize(dbp, 0, 32 * 1024, 0)) != 0) {
+		dbp->err(dbp, ret, "set_cachesize");
+		goto err1;
+	}
+	if ((ret = dbp->open(dbp,
+	    NULL, database, NULL, DB_BTREE, DB_CREATE, 0664)) != 0) {
+		dbp->err(dbp, ret, "%s: open", database);
+		goto err1;
+	}
+
+	/*
+	 * Insert records into the database, where the key is the user
+	 * input and the data is the user input in reverse order.
+	 */
+	memset(&key, 0, sizeof(DBT));
+	memset(&data, 0, sizeof(DBT));
+	for (;;) {
+		printf("input> ");
+		fflush(stdout);
+		if (fgets(buf, sizeof(buf), stdin) == NULL)
+			break;
+		if (strcmp(buf, "exit\n") == 0 || strcmp(buf, "quit\n") == 0)
+			break;
+		if ((len = strlen(buf)) <= 1)
+			continue;
+		for (t = rbuf, p = buf + (len - 2); p >= buf;)
+			*t++ = *p--;
+		*t++ = '\0';
+
+		key.data = buf;
+		data.data = rbuf;
+		data.size = key.size = (u_int32_t)len - 1;
+
+		switch (ret =
+		    dbp->put(dbp, NULL, &key, &data, DB_NOOVERWRITE)) {
+		case 0:
+			break;
+		default:
+			dbp->err(dbp, ret, "DB->put");
+			if (ret != DB_KEYEXIST)
+				goto err1;
+			break;
+		}
+	}
+	printf("\n");
+
+	/* Acquire a cursor for the database. */
+	if ((ret = dbp->cursor(dbp, NULL, &dbcp, 0)) != 0) {
+		dbp->err(dbp, ret, "DB->cursor");
+		goto err1;
+	}
+
+	/* Initialize the key/data pair so the flags aren't set. */
+	memset(&key, 0, sizeof(key));
+	memset(&data, 0, sizeof(data));
+
+	/* Walk through the database and print out the key/data pairs. */
+	while ((ret = dbcp->get(dbcp, &key, &data, DB_NEXT)) == 0)
+		printf("%.*s : %.*s\n",
+		    (int)key.size, (char *)key.data,
+		    (int)data.size, (char *)data.data);
+	if (ret != DB_NOTFOUND) {
+		dbp->err(dbp, ret, "DBcursor->get");
+		goto err2;
+	}
+
+	/* Close everything down. */
+	if ((ret = dbcp->close(dbcp)) != 0) {
+		dbp->err(dbp, ret, "DBcursor->close");
+		goto err1;
+	}
+	if ((ret = dbp->close(dbp, 0)) != 0) {
+		fprintf(stderr,
+		    "%s: DB->close: %s\n", progname, db_strerror(ret));
+		return (EXIT_FAILURE);
+	}
+	return (EXIT_SUCCESS);
+
+err2:	(void)dbcp->close(dbcp);
+err1:	(void)dbp->close(dbp, 0);
+	return (EXIT_FAILURE);
+}
+
+int
+dbdemo_usage()
+{
+	(void)fprintf(stderr, "usage: ex_access [-r] [database]\n");
+	return (EXIT_FAILURE);
+}

build_vxworks/dbdemo/dbdemo20.wpj

@@ -0,0 +1,158 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUMgnu_BUILDRULE
+dbdemo20.out
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AR
+ar386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUMgnu/dbdemo20.a
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_AS
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CC
+cc386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CFLAGS_AS
+-g \
+	-mpentium \
+	-ansi \
+	-nostdinc \
+	-fvolatile \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-x \
+	assembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_CPP
+cc386 -E -P -xc
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD
+ld386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDDEPS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_NM
+nm386 -g
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_MACRO_SIZE
+size386
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUMgnu_TC
+::tc_PENTIUMgnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_dbdemo20.out
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUMgnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUMgnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.0
+<END>
+<BEGIN> FILE_dbdemo.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_dbdemo.c_dependencies
+<END>
+
+<BEGIN> FILE_dbdemo.c_objects
+dbdemo.o
+<END>
+
+<BEGIN> FILE_dbdemo.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/dbdemo.c
+<END>
+
+<BEGIN> userComments
+dbdemo
+<END>

build_vxworks/dbdemo/dbdemo22.wpj

@@ -0,0 +1,192 @@
+Document file - DO NOT EDIT
+
+<BEGIN> BUILD_PENTIUM2gnu_BUILDRULE
+dbdemo22.out
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AR
+arpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_ARCHIVE
+$(PRJ_DIR)/PENTIUM2gnu/dbdemo22.a
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_AS
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC
+ccpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CC_ARCH_SPEC
+-mcpu=pentiumpro -march=pentiumpro
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-DRW_MULTI_THREAD \
+	-D_REENTRANT \
+	-fvolatile \
+	-fno-builtin \
+	-fno-defer-pop \
+	-I$(PRJ_DIR)/.. \
+	-I$(PRJ_DIR)/../.. \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CFLAGS_AS
+-g \
+	-mcpu=pentiumpro \
+	-march=pentiumpro \
+	-ansi \
+	-nostdlib \
+	-fno-builtin \
+	-fno-defer-pop \
+	-P \
+	-xassembler-with-cpp \
+	-I$(WIND_BASE)/target/h \
+	-DCPU=PENTIUM2 \
+	-DTOOL_FAMILY=gnu \
+	-DTOOL=gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_CPP
+ccpentium -E -P
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_HEX_FLAGS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD
+ldpentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LDFLAGS
+-X -N
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL
+ccpentium -r -nostdlib -Wl,-X
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_LD_PARTIAL_FLAGS
+-X -r
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_NM
+nmpentium -g
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEFINE_MACRO
+-D
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_DEPEND
+-M -w
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_GENERATE_DEPENDENCY_FILE
+-MD
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_INCLUDE_DIR
+-I
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_LANG_C
+-xc
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_OPTION_UNDEFINE_MACRO
+-U
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_POST_BUILD_RULE
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_PRJ_LIBS
+
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_SIZE
+sizepentium
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_MACRO_TOOL_FAMILY
+gnu
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_RO_DEPEND_PATH
+{$(WIND_BASE)/target/h/} \
+	{$(WIND_BASE)/target/src/} \
+	{$(WIND_BASE)/target/config/}
+<END>
+
+<BEGIN> BUILD_PENTIUM2gnu_TC
+::tc_PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD_RULE_archive
+
+<END>
+
+<BEGIN> BUILD_RULE_dbdemo22.out
+
+<END>
+
+<BEGIN> BUILD_RULE_dbdemo22.pl
+
+<END>
+
+<BEGIN> BUILD_RULE_objects
+
+<END>
+
+<BEGIN> BUILD__CURRENT
+PENTIUM2gnu
+<END>
+
+<BEGIN> BUILD__LIST
+PENTIUM2gnu
+<END>
+
+<BEGIN> CORE_INFO_TYPE
+::prj_vxApp
+<END>
+
+<BEGIN> CORE_INFO_VERSION
+2.2
+<END>
+<BEGIN> FILE_dbdemo.c_dependDone
+FALSE
+<END>
+
+<BEGIN> FILE_dbdemo.c_dependencies
+<END>
+
+<BEGIN> FILE_dbdemo.c_objects
+dbdemo.o
+<END>
+
+<BEGIN> FILE_dbdemo.c_tool
+C/C++ compiler
+<END>
+
+<BEGIN> PROJECT_FILES
+$(PRJ_DIR)/dbdemo.c
+<END>
+
+<BEGIN> userComments
+dbdemo
+<END>

build_wince/Berkeley_DB.sln

@@ -0,0 +1,61 @@
+
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "db_small", "db_small.vcproj", "{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "db_static", "db_static.vcproj", "{4AB4958F-8DD0-49B5-8C02-014B5637C59A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wce_tpcb", "wce_tpcb.vcproj", "{F2CE670A-ABAE-414A-9A17-8079AB58613F}"
+	ProjectSection(ProjectDependencies) = postProject
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A} = {4AB4958F-8DD0-49B5-8C02-014B5637C59A}
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Pocket PC 2003 (ARMV4) = Debug|Pocket PC 2003 (ARMV4)
+		Debug|Smartphone 2003 (ARMV4) = Debug|Smartphone 2003 (ARMV4)
+		Release|Pocket PC 2003 (ARMV4) = Release|Pocket PC 2003 (ARMV4)
+		Release|Smartphone 2003 (ARMV4) = Release|Smartphone 2003 (ARMV4)
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Debug|Pocket PC 2003 (ARMV4).ActiveCfg = Debug|Pocket PC 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Debug|Pocket PC 2003 (ARMV4).Build.0 = Debug|Pocket PC 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Debug|Pocket PC 2003 (ARMV4).Deploy.0 = Debug|Pocket PC 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Debug|Smartphone 2003 (ARMV4).ActiveCfg = Debug|Smartphone 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Debug|Smartphone 2003 (ARMV4).Build.0 = Debug|Smartphone 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Debug|Smartphone 2003 (ARMV4).Deploy.0 = Debug|Smartphone 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Release|Pocket PC 2003 (ARMV4).ActiveCfg = Release|Pocket PC 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Release|Pocket PC 2003 (ARMV4).Build.0 = Release|Pocket PC 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Release|Pocket PC 2003 (ARMV4).Deploy.0 = Release|Pocket PC 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Release|Smartphone 2003 (ARMV4).ActiveCfg = Release|Smartphone 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Release|Smartphone 2003 (ARMV4).Build.0 = Release|Smartphone 2003 (ARMV4)
+		{6A2849DA-8F7C-4B50-BDAE-AE7752EF8213}.Release|Smartphone 2003 (ARMV4).Deploy.0 = Release|Smartphone 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Debug|Pocket PC 2003 (ARMV4).ActiveCfg = Debug|Pocket PC 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Debug|Pocket PC 2003 (ARMV4).Build.0 = Debug|Pocket PC 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Debug|Pocket PC 2003 (ARMV4).Deploy.0 = Debug|Pocket PC 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Debug|Smartphone 2003 (ARMV4).ActiveCfg = Debug|Smartphone 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Debug|Smartphone 2003 (ARMV4).Build.0 = Debug|Smartphone 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Debug|Smartphone 2003 (ARMV4).Deploy.0 = Debug|Smartphone 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Release|Pocket PC 2003 (ARMV4).ActiveCfg = Release|Pocket PC 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Release|Pocket PC 2003 (ARMV4).Build.0 = Release|Pocket PC 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Release|Pocket PC 2003 (ARMV4).Deploy.0 = Release|Pocket PC 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Release|Smartphone 2003 (ARMV4).ActiveCfg = Release|Smartphone 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Release|Smartphone 2003 (ARMV4).Build.0 = Release|Smartphone 2003 (ARMV4)
+		{4AB4958F-8DD0-49B5-8C02-014B5637C59A}.Release|Smartphone 2003 (ARMV4).Deploy.0 = Release|Smartphone 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Debug|Pocket PC 2003 (ARMV4).ActiveCfg = Debug|Pocket PC 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Debug|Pocket PC 2003 (ARMV4).Build.0 = Debug|Pocket PC 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Debug|Pocket PC 2003 (ARMV4).Deploy.0 = Debug|Pocket PC 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Debug|Smartphone 2003 (ARMV4).ActiveCfg = Debug|Smartphone 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Debug|Smartphone 2003 (ARMV4).Build.0 = Debug|Smartphone 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Debug|Smartphone 2003 (ARMV4).Deploy.0 = Debug|Smartphone 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Release|Pocket PC 2003 (ARMV4).ActiveCfg = Release|Pocket PC 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Release|Pocket PC 2003 (ARMV4).Build.0 = Release|Pocket PC 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Release|Pocket PC 2003 (ARMV4).Deploy.0 = Release|Pocket PC 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Release|Smartphone 2003 (ARMV4).ActiveCfg = Release|Smartphone 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Release|Smartphone 2003 (ARMV4).Build.0 = Release|Smartphone 2003 (ARMV4)
+		{F2CE670A-ABAE-414A-9A17-8079AB58613F}.Release|Smartphone 2003 (ARMV4).Deploy.0 = Release|Smartphone 2003 (ARMV4)
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

build_wince/Berkeley_DB.vcw

@@ -0,0 +1,56 @@
+Microsoft eMbedded Visual Tools Workspace File, Format Version 4.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "db_small"=.\db_small.vcp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "db_static"=.\db_static.vcp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "wce_tpcb"=.\wce_tpcb.vcp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+    Begin Project Dependency
+    Project_Dep_Name db_static
+    End Project Dependency
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

build_wince/app_vcp.src

@@ -0,0 +1,181 @@
+# Microsoft eMbedded Visual Tools Project File - Name="@project_name@" - Package Owner=<4>
+# Microsoft eMbedded Visual Tools Generated Build File, Format Version 6.02
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (WCE ARMV4) Application" 0xa301
+# TARGTYPE "Win32 (WCE emulator) Application" 0xa601
+
+CFG=@project_name@ - Win32 (WCE emulator) Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "@project_name@.vcn".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "@project_name@.vcn" CFG="@project_name@ - Win32 (WCE emulator) Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "@project_name@ - Win32 (WCE emulator) Release" (based on "Win32 (WCE emulator) Application")
+!MESSAGE "@project_name@ - Win32 (WCE emulator) Debug" (based on "Win32 (WCE emulator) Application")
+!MESSAGE "@project_name@ - Win32 (WCE ARMV4) Release" (based on "Win32 (WCE ARMV4) Application")
+!MESSAGE "@project_name@ - Win32 (WCE ARMV4) Debug" (based on "Win32 (WCE ARMV4) Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+# PROP ATL_Project 2
+
+!IF  "$(CFG)" == "@project_name@ - Win32 (WCE emulator) Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "@lib_rel_dest@_EMU"
+# PROP BASE Intermediate_Dir "@lib_rel_dest@_EMU/@project_name@"
+# PROP BASE CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "@lib_rel_dest@_EMU"
+# PROP Intermediate_Dir "@lib_rel_dest@_EMU/@project_name@"
+# PROP CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "NDEBUG" /d "$(CePlatform)" /d "_X86_" /d "x86" /d "_i386_" /r
+# ADD RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "NDEBUG" /d "$(CePlatform)" /d "_X86_" /d "x86" /d "_i386_" /r
+CPP=cl.exe
+# ADD BASE CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "i_386_" /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "NDEBUG" /Gs8192 @extra_cppflags@ /GF /O2 /c
+# ADD CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /I "." /I ".." /D "_i386_" /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "NDEBUG" /D "__NO_SYSTEM_INCLUDES" /Gs8192 @extra_cppflags@ /GF /O2 /c
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@s.lib commctrl.lib coredll.lib $(CEx86Corelibc) /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /nodefaultlib:"OLDNAMES.lib" /nodefaultlib:$(CENoDefaultLib) /subsystem:$(CESubsystem) /MACHINE:IX86 /libpath:"@lib_rel_dest@_EMU"
+# ADD LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@s.lib commctrl.lib coredll.lib $(CEx86Corelibc) /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /nodefaultlib:"OLDNAMES.lib" /nodefaultlib:$(CENoDefaultLib) /subsystem:$(CESubsystem) /MACHINE:IX86 /libpath:"@lib_rel_dest@_EMU"
+
+!ELSEIF  "$(CFG)" == "@project_name@ - Win32 (WCE emulator) Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "@lib_debug_dest@_EMU"
+# PROP BASE Intermediate_Dir "@lib_debug_dest@_EMU\@project_name@"
+# PROP BASE CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "@lib_debug_dest@_EMU"
+# PROP Intermediate_Dir "@lib_debug_dest@_EMU\@project_name@"
+# PROP CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "$(CePlatform)" /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "DEBUG" /d "_X86_" /d "x86" /d "_i386_" /r
+# ADD RSC /l 0x409 /d "$(CePlatform)" /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "DEBUG" /d "_X86_" /d "x86" /d "_i386_" /r
+CPP=cl.exe
+# ADD BASE CPP /nologo /W3 /Zi /Od /D "DEBUG" /D "_i386_" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "i_386_" /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /Gs8192 @extra_cppflags@ /GF /c
+# ADD CPP /nologo /W3 /Zi /Od /I "." /I ".." /D "DEBUG" /D "_i386_" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "i_386_" /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "__NO_SYSTEM_INCLUDES" /Gs8192 @extra_cppflags@ /GF /c
+# SUBTRACT CPP 
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@sd.lib commctrl.lib coredll.lib $(CEx86Corelibc) /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /debug /nodefaultlib:"OLDNAMES.lib" /nodefaultlib:$(CENoDefaultLib) /subsystem:$(CESubsystem) /MACHINE:IX86 /libpath:"@lib_debug_dest@_EMU"
+# ADD LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@sd.lib commctrl.lib coredll.lib $(CEx86Corelibc) /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /debug /nodefaultlib:"OLDNAMES.lib" /nodefaultlib:$(CENoDefaultLib) /out:"Debug_EMU/@project_name@.exe" /subsystem:$(CESubsystem) /MACHINE:IX86 /libpath:"@lib_debug_dest@_EMU"
+
+!ELSEIF  "$(CFG)" == "@project_name@ - Win32 (WCE ARMV4) Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "@lib_rel_dest@_ARMV4"
+# PROP BASE Intermediate_Dir "Release_ARMV4/@project_name@"
+# PROP BASE CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "@lib_rel_dest@_ARMV4"
+# PROP Intermediate_Dir "Release_ARMV4/@project_name@"
+# PROP CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "NDEBUG" /d "UNICODE" /d "_UNICODE" /d "$(CePlatform)" /d "ARM" /d "_ARM_" /d "ARMV4" /r
+# ADD RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "NDEBUG" /d "UNICODE" /d "_UNICODE" /d "$(CePlatform)" /d "ARM" /d "_ARM_" /d "ARMV4" /r
+CPP=clarm.exe
+# ADD BASE CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "NDEBUG" /O2 /M$(CECrtMT) @extra_cppflags@ /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "NDEBUG" /O2 /M$(CECrtMT) @extra_cppflags@ /c
+# SUBTRACT CPP 
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@s.lib commctrl.lib coredll.lib /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /nodefaultlib:"$(CENoDefaultLib)" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /libpath:"@lib_rel_dest@_ARMV4"
+# ADD LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@s.lib commctrl.lib coredll.lib /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /nodefaultlib:"$(CENoDefaultLib)" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /libpath:"@lib_rel_dest@_ARMV4"
+
+!ELSEIF  "$(CFG)" == "@project_name@ - Win32 (WCE ARMV4) Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "@lib_debug_dest@_ARMV4"
+# PROP BASE Intermediate_Dir "Debug_ARMV4/@project_name@"
+# PROP BASE CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "@lib_debug_dest@_ARMV4"
+# PROP Intermediate_Dir "Debug_ARMV4/@project_name@"
+# PROP CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "DEBUG" /d "UNICODE" /d "_UNICODE" /d "$(CePlatform)" /d "ARM" /d "_ARM_" /d "ARMV4" /r
+# ADD RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "DEBUG" /d "UNICODE" /d "_UNICODE" /d "$(CePlatform)" /d "ARM" /d "_ARM_" /d "ARMV4" /r
+CPP=clarm.exe
+# ADD BASE CPP /nologo /W3 /Zi /Od /D "DEBUG" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "UNICODE" /D "_UNICODE" /M$(CECrtMTDebug) @extra_cppflags@ /c
+# ADD CPP /nologo /W3 /Zi /Od /I "." /I ".." /D "DEBUG" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "UNICODE" /D "_UNICODE" /M$(CECrtMTDebug) @extra_cppflags@ /c
+# SUBTRACT CPP 
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@sd.lib commctrl.lib coredll.lib /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /debug /nodefaultlib:"$(CENoDefaultLib)" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /libpath:"@lib_debug_dest@_ARMV4"
+# ADD LINK32 libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@sd.lib commctrl.lib coredll.lib /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"WinMainCRTStartup" /debug /nodefaultlib:"$(CENoDefaultLib)" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /libpath:"@lib_debug_dest@_ARMV4"
+
+!ENDIF 
+
+# Begin Target
+
+# Name "@project_name@ - Win32 (WCE emulator) Release"
+# Name "@project_name@ - Win32 (WCE emulator) Debug"
+# Name "@project_name@ - Win32 (WCE ARMV4) Release"
+# Name "@project_name@ - Win32 (WCE ARMV4) Debug"
+
+# Begin Group "Files"
+
+@SOURCE_FILES@
+
+# End Group
+
+# End Target
+# End Project

build_wince/app_vcproj.src

@@ -0,0 +1,433 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8.00"
+	Name="@project_name@"
+	ProjectGUID="{@PROJ_GUID@}"
+	>
+	<Platforms>
+		<Platform
+			Name="Smartphone 2003 (ARMV4)"
+		/>
+		<Platform
+			Name="Pocket PC 2003 (ARMV4)"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Smartphone 2003 (ARMV4)"
+			OutputDirectory="$(ConfigurationName)_Smartphone2003_ARMV4\@project_name@"
+			IntermediateDirectory="$(ConfigurationName)_Smartphone2003_ARMV4\@project_name@"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				PreprocessorDefinitions="_DEBUG"
+				MkTypLibCompatible="true"
+				SuppressStartupBanner="true"
+				TargetEnvironment="1"
+				TypeLibraryName="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.tlb"
+				HeaderFileName=""
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="0"
+				AdditionalIncludeDirectories=".,.."
+				PreprocessorDefinitions="DEBUG;ARM;_ARM_;ARMV4;UNDER_CE=$(CEVER);_WIN32_WCE=$(CEVER);$(CePlatform);UNICODE;__NO_SYSTEM_INCLUDES;@extra_cppflags@"
+				RuntimeLibrary="1"
+				PrecompiledHeaderFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.pch"
+				AssemblerListingLocation="$(ConfigurationName)_Smartphone2003_ARMV4/"
+				ObjectFile="$(ConfigurationName)_Smartphone2003_ARMV4\@project_name@/"
+				ProgramDataBaseFileName="$(ConfigurationName)_Smartphone2003_ARMV4/"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				AdditionalOptions="/r "
+				PreprocessorDefinitions="UNDER_CE=$(CEVER),_WIN32_WCE=$(CEVER),DEBUG,UNICODE,_UNICODE,$(CePlatform),ARM,_ARM_,ARMV4"
+				Culture="1033"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalOptions="/ALIGN:4096 /subsystem:$(CESubsystem) /MACHINE:ARM "
+ 				AdditionalDependencies="libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@sd.lib commctrl.lib coredll.lib secchk.lib ccrtrtti.lib"
+				OutputFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.exe"
+				LinkIncremental="2"
+				SuppressStartupBanner="true"
+				AdditionalLibraryDirectories="$(ConfigurationName)_Smartphone2003_ARMV4"
+				IgnoreDefaultLibraryNames="$(CENoDefaultLib)"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.pdb"
+				StackReserveSize="65536"
+				StackCommitSize="4096"
+				EntryPointSymbol="WinMainCRTStartup"
+				BaseAddress="0x00010000"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+				SuppressStartupBanner="true"
+				OutputFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.bsc"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Pocket PC 2003 (ARMV4)"
+			OutputDirectory="$(ConfigurationName)_PocketPC2003_ARMV4\@project_name@"
+			IntermediateDirectory="$(ConfigurationName)_PocketPC2003_ARMV4\@project_name@"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				PreprocessorDefinitions="_DEBUG"
+				MkTypLibCompatible="true"
+				SuppressStartupBanner="true"
+				TargetEnvironment="1"
+				TypeLibraryName="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.tlb"
+				HeaderFileName=""
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="0"
+				AdditionalIncludeDirectories=".,.."
+				PreprocessorDefinitions="DEBUG;ARM;_ARM_;ARMV4;UNDER_CE=$(CEVER);_WIN32_WCE=$(CEVER);$(CePlatform);UNICODE;__NO_SYSTEM_INCLUDES;@extra_cppflags@"
+				RuntimeLibrary="1"
+				PrecompiledHeaderFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.pch"
+				AssemblerListingLocation="$(ConfigurationName)_PocketPC2003_ARMV4/"
+				ObjectFile="$(ConfigurationName)_PocketPC2003_ARMV4\@project_name@/"
+				ProgramDataBaseFileName="$(ConfigurationName)_PocketPC2003_ARMV4/"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				AdditionalOptions="/r "
+				PreprocessorDefinitions="UNDER_CE=$(CEVER),_WIN32_WCE=$(CEVER),DEBUG,UNICODE,_UNICODE,$(CePlatform),ARM,_ARM_,ARMV4"
+				Culture="1033"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalOptions="/ALIGN:4096 /subsystem:$(CESubsystem) /MACHINE:ARM "
+ 				AdditionalDependencies="libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@sd.lib commctrl.lib coredll.lib secchk.lib ccrtrtti.lib"
+				OutputFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.exe"
+				LinkIncremental="2"
+				SuppressStartupBanner="true"
+				AdditionalLibraryDirectories="$(ConfigurationName)_PocketPC2003_ARMV4"
+				IgnoreDefaultLibraryNames="$(CENoDefaultLib)"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.pdb"
+				StackReserveSize="65536"
+				StackCommitSize="4096"
+				EntryPointSymbol="WinMainCRTStartup"
+				BaseAddress="0x00010000"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+				SuppressStartupBanner="true"
+				OutputFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.bsc"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Smartphone 2003 (ARMV4)"
+			OutputDirectory="$(ConfigurationName)_Smartphone2003_ARMV4\@project_name@"
+			IntermediateDirectory="$(ConfigurationName)_Smartphone2003_ARMV4\@project_name@"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				PreprocessorDefinitions="NDEBUG"
+				MkTypLibCompatible="true"
+				SuppressStartupBanner="true"
+				TargetEnvironment="1"
+				TypeLibraryName="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.tlb"
+				HeaderFileName=""
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories=".,.."
+				PreprocessorDefinitions="_WIN32_WCE=$(CEVER);$(CePlatform);ARM;_ARM_;ARMV4;UNDER_CE=$(CEVER);UNICODE;NDEBUG;__NO_SYSTEM_INCLUDES;@extra_cppflags@"
+				StringPooling="true"
+				RuntimeLibrary="0"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.pch"
+				AssemblerListingLocation="$(ConfigurationName)_Smartphone2003_ARMV4/"
+				ObjectFile="$(ConfigurationName)_Smartphone2003_ARMV4\@project_name@/"
+				ProgramDataBaseFileName="$(ConfigurationName)_Smartphone2003_ARMV4/"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				AdditionalOptions="/r "
+				PreprocessorDefinitions="UNDER_CE=$(CEVER),_WIN32_WCE=$(CEVER),NDEBUG,UNICODE,_UNICODE,$(CePlatform),ARM,_ARM_,ARMV4"
+				Culture="1033"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalOptions="/ALIGN:4096 /subsystem:$(CESubsystem) /MACHINE:ARM "
+ 				AdditionalDependencies="libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@s.lib commctrl.lib coredll.lib secchk.lib ccrtrtti.lib"
+				OutputFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.exe"
+				LinkIncremental="1"
+				SuppressStartupBanner="true"
+				AdditionalLibraryDirectories="$(ConfigurationName)_Smartphone2003_ARMV4"
+				IgnoreDefaultLibraryNames="$(CENoDefaultLib)"
+				ProgramDatabaseFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.pdb"
+				StackReserveSize="65536"
+				StackCommitSize="4096"
+				EntryPointSymbol="WinMainCRTStartup"
+				BaseAddress="0x00010000"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+				SuppressStartupBanner="true"
+				OutputFile="$(ConfigurationName)_Smartphone2003_ARMV4/@project_name@.bsc"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Pocket PC 2003 (ARMV4)"
+			OutputDirectory="$(ConfigurationName)_PocketPC2003_ARMV4\@project_name@"
+			IntermediateDirectory="$(ConfigurationName)_PocketPC2003_ARMV4\@project_name@"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				PreprocessorDefinitions="NDEBUG"
+				MkTypLibCompatible="true"
+				SuppressStartupBanner="true"
+				TargetEnvironment="1"
+				TypeLibraryName="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.tlb"
+				HeaderFileName=""
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories=".,.."
+				PreprocessorDefinitions="_WIN32_WCE=$(CEVER);$(CePlatform);ARM;_ARM_;ARMV4;UNDER_CE=$(CEVER);UNICODE;NDEBUG;__NO_SYSTEM_INCLUDES;@extra_cppflags@"
+				StringPooling="true"
+				RuntimeLibrary="0"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.pch"
+				AssemblerListingLocation="$(ConfigurationName)_PocketPC2003_ARMV4/"
+				ObjectFile="$(ConfigurationName)_PocketPC2003_ARMV4\@project_name@/"
+				ProgramDataBaseFileName="$(ConfigurationName)_PocketPC2003_ARMV4/"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				AdditionalOptions="/r "
+				PreprocessorDefinitions="UNDER_CE=$(CEVER),_WIN32_WCE=$(CEVER),NDEBUG,UNICODE,_UNICODE,$(CePlatform),ARM,_ARM_,ARMV4"
+				Culture="1033"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalOptions="/ALIGN:4096 /subsystem:$(CESubsystem) /MACHINE:ARM "
+ 				AdditionalDependencies="libdb@DB_VERSION_MAJOR@@DB_VERSION_MINOR@s.lib commctrl.lib coredll.lib secchk.lib ccrtrtti.lib"
+				OutputFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.exe"
+				LinkIncremental="1"
+				SuppressStartupBanner="true"
+				AdditionalLibraryDirectories="$(ConfigurationName)_PocketPC2003_ARMV4"
+				IgnoreDefaultLibraryNames="$(CENoDefaultLib)"
+				ProgramDatabaseFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.pdb"
+				StackReserveSize="65536"
+				StackCommitSize="4096"
+				EntryPointSymbol="WinMainCRTStartup"
+				BaseAddress="0x00010000"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+				SuppressStartupBanner="true"
+				OutputFile="$(ConfigurationName)_PocketPC2003_ARMV4/@project_name@.bsc"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Files"
+			>
+@SOURCE_FILES@
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

build_wince/clib_port.h

@@ -0,0 +1,276 @@
+/* DO NOT EDIT: automatically built from dist/clib_port.in. */
+/*
+ * Minimum/maximum values for various types.
+ */
+#ifndef	UINT16_MAX			/* Maximum 16-bit unsigned. */
+#define	UINT16_MAX	65535
+#endif
+#ifndef	UINT32_MAX			/* Maximum 32-bit unsigned. */
+#define	UINT32_MAX	4294967295U
+#endif
+
+#ifndef	INT_MAX
+#if SIZEOF_INT == 4
+#define	INT_MAX		2147483647
+#endif
+#if SIZEOF_INT == 8
+#define	INT_MAX		9223372036854775807
+#endif
+#endif
+
+#ifndef	INT_MIN				/* minimum (signed) int value */
+#define	INT_MIN		(-INT_MAX-1)
+#endif
+
+#ifndef	UINT_MAX			/* maximum (signed) int value */
+#if SIZEOF_INT == 4
+#define	UINT_MAX	4294967295U
+#endif
+#if SIZEOF_INT == 8
+#define	UINT_MAX	18446744073709551615U
+#endif
+#endif
+
+#ifndef	LONG_MAX			/* maximum (signed) long value */
+#if SIZEOF_LONG == 4
+#define	LONG_MAX	2147483647
+#endif
+#if SIZEOF_LONG == 8
+#define	LONG_MAX	9223372036854775807L
+#endif
+#endif
+
+#ifndef	LONG_MIN			/* minimum (signed) long value */
+#define	LONG_MIN	(-LONG_MAX-1)
+#endif
+
+#ifndef	ULONG_MAX			/* maximum (unsigned) long value */
+#if SIZEOF_LONG == 4
+#define	ULONG_MAX	4294967295U
+#endif
+#if SIZEOF_LONG == 8
+#define	ULONG_MAX	18446744073709551615UL
+#endif
+#endif
+
+#if defined(HAVE_64BIT_TYPES)
+/*
+ * Override the system's 64-bit min/max constants.  AIX's 32-bit compiler can
+ * handle 64-bit values, but the system's constants don't include the LL/ULL
+ * suffix, and so can't be compiled using the 32-bit compiler.
+ */
+#undef	INT64_MAX
+#undef	INT64_MIN
+#undef	UINT64_MAX
+
+#ifdef	DB_WIN32
+#define	INT64_MAX	_I64_MAX
+#define	INT64_MIN	_I64_MIN
+#define	UINT64_MAX	_UI64_MAX
+#else
+#define	INT64_MAX	9223372036854775807LL
+#define	INT64_MIN	(-INT64_MAX-1)
+#define	UINT64_MAX	18446744073709551615ULL
+#endif	/* DB_WIN32 */
+
+#define	INT64_FMT	"%I64d"
+#define	UINT64_FMT	"%I64u"
+#endif	/* HAVE_64BIT_TYPES */
+
+/*
+ * Exit success/failure macros.
+ */
+#ifndef	HAVE_EXIT_SUCCESS
+#define	EXIT_FAILURE	1
+#define	EXIT_SUCCESS	0
+#endif
+
+/*
+ * File modes.
+ */
+#ifdef DB_WIN32
+#ifndef S_IREAD				/* WinCE doesn't have S_IREAD. */
+#define	S_IREAD		0
+#endif
+#ifndef S_IWRITE			/* WinCE doesn't have S_IWRITE. */
+#define	S_IWRITE	0
+#endif
+#ifndef	S_IRUSR
+#define	S_IRUSR		S_IREAD		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		S_IWRITE	/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0		/* X for other */
+#endif
+#else /* !DB_WIN32 */
+#ifndef	S_IRUSR
+#define	S_IRUSR		0000400		/* R for owner */
+#endif
+#ifndef	S_IWUSR
+#define	S_IWUSR		0000200		/* W for owner */
+#endif
+#ifndef	S_IXUSR
+#define	S_IXUSR		0000100		/* X for owner */
+#endif
+#ifndef	S_IRGRP
+#define	S_IRGRP		0000040		/* R for group */
+#endif
+#ifndef	S_IWGRP
+#define	S_IWGRP		0000020		/* W for group */
+#endif
+#ifndef	S_IXGRP
+#define	S_IXGRP		0000010		/* X for group */
+#endif
+#ifndef	S_IROTH
+#define	S_IROTH		0000004		/* R for other */
+#endif
+#ifndef	S_IWOTH
+#define	S_IWOTH		0000002		/* W for other */
+#endif
+#ifndef	S_IXOTH
+#define	S_IXOTH		0000001		/* X for other */
+#endif
+#endif /* !DB_WIN32 */
+
+/*
+ * Don't step on the namespace.  Other libraries may have their own
+ * implementations of these functions, we don't want to use their
+ * implementations or force them to use ours based on the load order.
+ */
+#ifndef	HAVE_ATOI
+#define	atoi		__db_Catoi
+#endif
+#ifndef	HAVE_ATOL
+#define	atol		__db_Catol
+#endif
+#ifndef	HAVE_FCLOSE
+#define	fclose		__db_Cfclose
+#endif
+#ifndef	HAVE_FGETC
+#define	fgetc		__db_Cfgetc
+#endif
+#ifndef	HAVE_FGETS
+#define	fgets		__db_Cfgets
+#endif
+#ifndef	HAVE_FOPEN
+#define	fopen		__db_Cfopen
+#endif
+#ifndef	HAVE_FWRITE
+#define	fwrite		__db_Cfwrite
+#endif
+#ifndef	HAVE_GETADDRINFO
+#define	freeaddrinfo(a)		__db_Cfreeaddrinfo(a)
+#define	getaddrinfo(a, b, c, d)	__db_Cgetaddrinfo(a, b, c, d)
+#endif
+#ifndef	HAVE_GETCWD
+#define	getcwd		__db_Cgetcwd
+#endif
+#ifndef	HAVE_GETOPT
+#define	getopt		__db_Cgetopt
+#define	optarg		__db_Coptarg
+#define	opterr		__db_Copterr
+#define	optind		__db_Coptind
+#define	optopt		__db_Coptopt
+#define	optreset	__db_Coptreset
+#endif
+#ifndef	HAVE_ISALPHA
+#define	isalpha		__db_Cisalpha
+#endif
+#ifndef	HAVE_ISDIGIT
+#define	isdigit		__db_Cisdigit
+#endif
+#ifndef	HAVE_ISPRINT
+#define	isprint		__db_Cisprint
+#endif
+#ifndef	HAVE_ISSPACE
+#define	isspace		__db_Cisspace
+#endif
+#ifndef	HAVE_LOCALTIME
+#define	localtime	__db_Clocaltime
+#endif
+#ifndef	HAVE_MEMCMP
+#define	memcmp		__db_Cmemcmp
+#endif
+#ifndef	HAVE_MEMCPY
+#define	memcpy		__db_Cmemcpy
+#endif
+#ifndef	HAVE_MEMMOVE
+#define	memmove		__db_Cmemmove
+#endif
+#ifndef	HAVE_PRINTF
+#define	printf		__db_Cprintf
+#define	fprintf		__db_Cfprintf
+#endif
+#ifndef	HAVE_QSORT
+#define	qsort		__db_Cqsort
+#endif
+#ifndef	HAVE_RAISE
+#define	raise		__db_Craise
+#endif
+#ifndef	HAVE_RAND
+#define	rand		__db_Crand
+#define	srand		__db_Csrand
+#endif
+#ifndef	HAVE_SNPRINTF
+#define	snprintf	__db_Csnprintf
+#endif
+#ifndef	HAVE_STRCASECMP
+#define	strcasecmp	__db_Cstrcasecmp
+#define	strncasecmp	__db_Cstrncasecmp
+#endif
+#ifndef	HAVE_STRCAT
+#define	strcat		__db_Cstrcat
+#endif
+#ifndef	HAVE_STRCHR
+#define	strchr		__db_Cstrchr
+#endif
+#ifndef	HAVE_STRDUP
+#define	strdup		__db_Cstrdup
+#endif
+#ifndef	HAVE_STRERROR
+#define	strerror	__db_Cstrerror
+#endif
+#ifndef	HAVE_STRNCAT
+#define	strncat		__db_Cstrncat
+#endif
+#ifndef	HAVE_STRNCMP
+#define	strncmp		__db_Cstrncmp
+#endif
+#ifndef	HAVE_STRRCHR
+#define	strrchr		__db_Cstrrchr
+#endif
+#ifndef	HAVE_STRSEP
+#define	strsep		__db_Cstrsep
+#endif
+#ifndef	HAVE_STRTOL
+#define	strtol		__db_Cstrtol
+#endif
+#ifndef	HAVE_STRTOUL
+#define	strtoul		__db_Cstrtoul
+#endif
+#ifndef	HAVE_TIME
+#define	time		__db_Ctime
+#endif
+#ifndef	HAVE_VSNPRINTF
+#define	vsnprintf	__db_Cvsnprintf
+#endif

build_wince/db_config.h

@@ -0,0 +1,585 @@
+/* DO NOT EDIT: automatically built by dist/s_windows. */
+/* Define to 1 if you want to build a version for running the test suite. */
+/* #undef CONFIG_TEST */
+
+/* We use DB_WIN32 much as one would use _WIN32 -- to specify that we're using
+   an operating system environment that supports Win32 calls and semantics. We
+   don't use _WIN32 because Cygwin/GCC also defines _WIN32, even though
+   Cygwin/GCC closely emulates the Unix environment. */
+#define DB_WIN32 1
+
+/* Define to 1 if you want a debugging version. */
+#if defined(_DEBUG)
+#if !defined(DEBUG)
+#define DEBUG 1
+#endif
+#endif
+
+/* Define to 1 if you want a version that logs read operations. */
+/* #undef DEBUG_ROP */
+
+/* Define to 1 if you want a version that logs write operations. */
+/* #undef DEBUG_WOP */
+
+/* Define to 1 if you want a version with run-time diagnostic checking. */
+/* #undef DIAGNOSTIC */
+
+/* Define to 1 if 64-bit types are available. */
+#define HAVE_64BIT_TYPES 1
+
+/* Define to 1 if you have the `abort' function. */
+/* #undef HAVE_ABORT */
+
+/* Define to 1 if you have the `atoi' function. */
+#define HAVE_ATOI 1
+
+/* Define to 1 if you have the `atol' function. */
+#define HAVE_ATOL 1
+
+/* Define to 1 if you have the `backtrace' function. */
+/* #undef HAVE_BACKTRACE */
+
+/* Define to 1 if you have the `backtrace_symbols' function. */
+/* #undef HAVE_BACKTRACE_SYMBOLS */
+
+/* Define to 1 if building BREW. */
+/* #undef HAVE_BREW */
+
+/* Define to 1 if building on BREW (SDK2). */
+/* #undef HAVE_BREW_SDK2 */
+
+/* Define to 1 if you have the `clock_gettime' function. */
+/* #undef HAVE_CLOCK_GETTIME */
+
+/* Define to 1 if clock_gettime supports CLOCK_MONOTONIC. */
+/* #undef HAVE_CLOCK_MONOTONIC */
+
+/* Define to 1 if Berkeley DB release includes strong cryptography. */
+#ifndef HAVE_SMALLBUILD
+#define HAVE_CRYPTO 1
+#endif
+
+/* Define to 1 if you have the `ctime_r' function. */
+/* #undef HAVE_CTIME_R  */
+
+/* Define to 1 if ctime_r takes a buffer length as a third argument. */
+/* #undef HAVE_CTIME_R_3ARG */
+
+/* Define to 1 if you have the `directio' function. */
+/* #undef HAVE_DIRECTIO */
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_DIRENT_H */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+/* #undef HAVE_DLFCN_H */
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+/* #undef HAVE_EXECINFO_H */
+
+/* Define to 1 if you have EXIT_SUCCESS/EXIT_FAILURE #defines. */
+#define HAVE_EXIT_SUCCESS 1
+
+/* Define to 1 if you have the `fchmod' function. */
+/* #undef HAVE_FCHMOD */
+
+/* Define to 1 if you have the `fclose' function. */
+#define HAVE_FCLOSE 1
+
+/* Define to 1 if you have the `fcntl' function. */
+/* #undef HAVE_FCNTL */
+
+/* Define to 1 if fcntl/F_SETFD denies child access to file descriptors. */
+/* #undef HAVE_FCNTL_F_SETFD */
+
+/* Define to 1 if you have the `fdatasync' function. */
+/* #undef HAVE_FDATASYNC */
+
+/* Define to 1 if you have the `fgetc' function. */
+#define HAVE_FGETC 1
+
+/* Define to 1 if you have the `fgets' function. */
+#define HAVE_FGETS 1
+
+/* Define to 1 if allocated filesystem blocks are not zeroed. */
+#define HAVE_FILESYSTEM_NOTZERO 1
+
+/* Define to 1 if you have the `fopen' function. */
+#define HAVE_FOPEN 1
+
+/* Define to 1 if you have the `ftruncate' function. */
+/* #undef HAVE_FTRUNCATE */
+
+/* Define to 1 if you have the `fwrite' function. */
+#define HAVE_FWRITE 1
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+/* #undef HAVE_GETADDRINFO */
+
+/* Define to 1 if you have the `getcwd' function. */
+/* #undef HAVE_GETCWD */
+
+/* Define to 1 if you have the `getenv' function. */
+/* #undef HAVE_GETENV */
+
+/* Define to 1 if you have the `getgid' function. */
+/* #undef HAVE_GETGID */
+
+/* Define to 1 if you have the `getopt' function. */
+/*
+ * Windows does not have the getopt function, but as Berkeley DB example
+ * programs require getopt, we handle it outside of this configuration.
+ */
+#define	HAVE_GETOPT 1
+
+/* Define to 1 if getopt supports the optreset variable. */
+#define HAVE_GETOPT_OPTRESET 1
+
+/* Define to 1 if you have the `getrusage' function. */
+/* #undef HAVE_GETRUSAGE */
+
+/* Define to 1 if you have the `gettimeofday' function. */
+/* #undef HAVE_GETTIMEOFDAY */
+
+/* Define to 1 if you have the `getuid' function. */
+/* #undef HAVE_GETUID */
+
+/* Define to 1 if building Hash access method. */
+#ifndef HAVE_SMALLBUILD
+#define HAVE_HASH 1
+#endif
+
+/* Define to 1 if you have the `hstrerror' function. */
+/* #undef HAVE_HSTRERROR */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+/* #undef HAVE_INTTYPES_H */
+
+/* Define to 1 if you have the `isalpha' function. */
+#define HAVE_ISALPHA 1
+
+/* Define to 1 if you have the `isdigit' function. */
+#define HAVE_ISDIGIT 1
+
+/* Define to 1 if you have the `isprint' function. */
+#define HAVE_ISPRINT 1
+
+/* Define to 1 if you have the `localtime' function. */
+/* #undef HAVE_LOCALTIME */
+
+/* Define to 1 if you have the `isspace' function. */
+#define HAVE_ISSPACE 1
+
+/* Define to 1 if you have the `memcmp' function. */
+#define HAVE_MEMCMP 1
+
+/* Define to 1 if you have the `memcpy' function. */
+#define HAVE_MEMCPY 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `mlock' function. */
+/* #undef HAVE_MLOCK */
+
+/* Define to 1 if you have the `mmap' function. */
+/* #undef HAVE_MMAP */
+
+/* Define to 1 if you have the `mprotect' function. */
+/* #undef HAVE_MPROTECT */
+
+/* Define to 1 if you have the `munlock' function. */
+/* #undef HAVE_MUNLOCK */
+
+/* Define to 1 if you have the `munmap' function. */
+/* #undef HAVE_MUNMAP */
+
+/* Define to 1 to use the GCC compiler and 68K assembly language mutexes. */
+/* #undef HAVE_MUTEX_68K_GCC_ASSEMBLY */
+
+/* Define to 1 to use the AIX _check_lock mutexes. */
+/* #undef HAVE_MUTEX_AIX_CHECK_LOCK */
+
+/* Define to 1 to use the GCC compiler and Alpha assembly language mutexes. */
+/* #undef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and ARM assembly language mutexes. */
+/* #undef HAVE_MUTEX_ARM_GCC_ASSEMBLY */
+
+/* Define to 1 to use the Apple/Darwin _spin_lock_try mutexes. */
+/* #undef HAVE_MUTEX_DARWIN_SPIN_LOCK_TRY */
+
+/* Define to 1 to use the UNIX fcntl system call mutexes. */
+/* #undef HAVE_MUTEX_FCNTL */
+
+/* Define to 1 to use the GCC compiler and PaRisc assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_HPPA_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on HP-UX. */
+/* #undef HAVE_MUTEX_HPPA_MSEM_INIT */
+
+/* Define to 1 to use test-and-set mutexes with blocking mutexes. */
+/* #undef HAVE_MUTEX_HYBRID */
+
+/* Define to 1 to use the GCC compiler and IA64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_IA64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and MIPS assembly language mutexes. */
+/* #undef HAVE_MUTEX_MIPS_GCC_ASSEMBLY */
+
+/* Define to 1 to use the msem_XXX mutexes on systems other than HP-UX. */
+/* #undef HAVE_MUTEX_MSEM_INIT */
+
+/* Define to 1 to use the GCC compiler and PowerPC assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_PPC_GCC_ASSEMBLY */
+
+/* Define to 1 to use POSIX 1003.1 pthread_XXX mutexes. */
+/* #undef HAVE_MUTEX_PTHREADS */
+
+/* Define to 1 to use Reliant UNIX initspin mutexes. */
+/* #undef HAVE_MUTEX_RELIANTUNIX_INITSPIN */
+
+/* Define to 1 to use the IBM C compiler and S/390 assembly language mutexes.
+   */
+/* #undef HAVE_MUTEX_S390_CC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and S/390 assembly language mutexes. */
+/* #undef HAVE_MUTEX_S390_GCC_ASSEMBLY */
+
+/* Define to 1 to use the SCO compiler and x86 assembly language mutexes. */
+/* #undef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY */
+
+/* Define to 1 to use the obsolete POSIX 1003.1 sema_XXX mutexes. */
+/* #undef HAVE_MUTEX_SEMA_INIT */
+
+/* Define to 1 to use the SGI XXX_lock mutexes. */
+/* #undef HAVE_MUTEX_SGI_INIT_LOCK */
+
+/* Define to 1 to use the Solaris _lock_XXX mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LOCK_TRY */
+
+/* Define to 1 to use the Solaris lwp threads mutexes. */
+/* #undef HAVE_MUTEX_SOLARIS_LWP */
+
+/* Define to 1 to use the GCC compiler and Sparc assembly language mutexes. */
+/* #undef HAVE_MUTEX_SPARC_GCC_ASSEMBLY */
+
+/* Define to 1 if the Berkeley DB library should support mutexes. */
+#define HAVE_MUTEX_SUPPORT 1
+
+/* Define to 1 if mutexes hold system resources. */
+/* #undef HAVE_MUTEX_SYSTEM_RESOURCES */
+
+/* Define to 1 to configure mutexes intra-process only. */
+/* #undef HAVE_MUTEX_THREAD_ONLY */
+
+/* Define to 1 to use the CC compiler and Tru64 assembly language mutexes. */
+/* #undef HAVE_MUTEX_TRU64_CC_ASSEMBLY */
+
+/* Define to 1 to use the UNIX International mutexes. */
+/* #undef HAVE_MUTEX_UI_THREADS */
+
+/* Define to 1 to use the UTS compiler and assembly language mutexes. */
+/* #undef HAVE_MUTEX_UTS_CC_ASSEMBLY */
+
+/* Define to 1 to use VMS mutexes. */
+/* #undef HAVE_MUTEX_VMS */
+
+/* Define to 1 to use VxWorks mutexes. */
+/* #undef HAVE_MUTEX_VXWORKS */
+
+/* Define to 1 to use the MSVC compiler and Windows mutexes. */
+#define HAVE_MUTEX_WIN32 1
+
+/* Define to 1 to use the GCC compiler and Windows mutexes. */
+/* #undef HAVE_MUTEX_WIN32_GCC */
+
+/* Define to 1 to use the GCC compiler and 64-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_64_GCC_ASSEMBLY */
+
+/* Define to 1 to use the GCC compiler and 32-bit x86 assembly language
+   mutexes. */
+/* #undef HAVE_MUTEX_X86_GCC_ASSEMBLY */
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the O_DIRECT flag. */
+/* #undef HAVE_O_DIRECT */
+
+/* Define to 1 if you have the `pread' function. */
+/* #undef HAVE_PREAD */
+
+/* Define to 1 if you have the `printf' function. */
+#define HAVE_PRINTF 1
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 to configure Berkeley DB for POSIX pthread API. */
+/* #undef HAVE_PTHREAD_API */
+
+/* Define to 1 if you have the `pthread_yield' function. */
+/* #undef HAVE_PTHREAD_YIELD */
+
+/* Define to 1 if you have the `pwrite' function. */
+/* #undef HAVE_PWRITE */
+
+/* Define to 1 if building on QNX. */
+/* #undef HAVE_QNX */
+
+/* Define to 1 if you have the `qsort' function. */
+#define HAVE_QSORT 1
+
+/* Define to 1 if building Queue access method. */
+#ifndef HAVE_SMALLBUILD
+#define HAVE_QUEUE 1
+#endif
+
+/* Define to 1 if you have the `raise' function. */
+#define HAVE_RAISE 1
+
+/* Define to 1 if you have the `rand' function. */
+#define HAVE_RAND 1
+
+/* Define to 1 if building replication support. */
+/* #undef HAVE_REPLICATION */
+
+/* Define to 1 if building the Berkeley DB replication framework. */
+/* #undef HAVE_REPLICATION_THREADS */
+
+/* Define to 1 if building RPC client/server. */
+/* #undef HAVE_RPC */
+
+/* Define to 1 if building on S60. */
+/* #undef HAVE_S60 */
+
+/* Define to 1 if you have the `sched_yield' function. */
+/* #undef HAVE_SCHED_YIELD */
+
+/* Define to 1 if you have the `select' function. */
+/* #undef HAVE_SELECT */
+
+/* Define to 1 if you have the `setgid' function. */
+/* #undef HAVE_SETGID */
+
+/* Define to 1 if you have the `setuid' function. */
+#define HAVE_SETUID 1
+
+/* Define to 1 if shmctl/SHM_LOCK locks down shared memory segments. */
+/* #undef HAVE_SHMCTL_SHM_LOCK */
+
+/* Define to 1 if you have the `shmget' function. */
+/* #undef HAVE_SHMGET */
+
+/* Define to 1 if you have the `sigaction' function. */
+/* #undef HAVE_SIGACTION */
+
+/* Define to 1 if thread identifier type db_threadid_t is integral. */
+#define HAVE_SIMPLE_THREAD_TYPE 1
+
+/* Define to 1 if you have the `snprintf' function. */
+#define HAVE_SNPRINTF 1
+
+/* Define to 1 if you have the `stat' function. */
+#define HAVE_STAT 1
+
+/* Define to 1 if building statistics support. */
+#define HAVE_STATISTICS 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+/* #undef HAVE_STDINT_H */
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#define HAVE_STRCASECMP 1
+
+/* Define to 1 if you have the `strcat' function. */
+#define HAVE_STRCAT 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strdup' function. */
+/* #undef HAVE_STRDUP */
+
+/* Define to 1 if you have the `strerror' function. */
+/* #undef HAVE_STRERROR */
+
+/* Define to 1 if you have the `strftime' function. */
+/* #undef HAVE_STRFTIME */
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strncat' function. */
+#define HAVE_STRNCAT 1
+
+/* Define to 1 if you have the `strncmp' function. */
+#define HAVE_STRNCMP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strsep' function. */
+/* #undef HAVE_STRSEP */
+
+/* Define to 1 if you have the `strtol' function. */
+#define HAVE_STRTOL 1
+
+/* Define to 1 if you have the `strtoul' function. */
+#define HAVE_STRTOUL 1
+
+/* Define to 1 if `st_blksize' is member of `struct stat'. */
+/* #undef HAVE_STRUCT_STAT_ST_BLKSIZE */
+
+/* Define to 1 if you have the `sysconf' function. */
+/* #undef HAVE_SYSCONF */
+
+/* Define to 1 if port includes files in the Berkeley DB source code. */
+/* #undef HAVE_SYSTEM_INCLUDE_FILES */
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+/* #undef HAVE_SYS_SELECT_H */
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+/* #undef HAVE_SYS_SOCKET_H */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+/* #undef HAVE_SYS_TIME_H */
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the `time' function. */
+/* #undef HAVE_TIME */
+
+/* Define to 1 if you have the <unistd.h> header file. */
+/* #undef HAVE_UNISTD_H */
+
+/* Define to 1 if unlink of file with open file descriptors will fail. */
+/* #undef HAVE_UNLINK_WITH_OPEN_FAILURE */
+
+/* Define to 1 if port includes historic database upgrade support. */
+/* #undef HAVE_UPGRADE_SUPPORT */
+
+/* Define to 1 if building access method verification support. */
+#ifndef HAVE_SMALLBUILD
+#define HAVE_VERIFY 1
+#endif
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#define HAVE_VSNPRINTF 1
+
+/* Define to 1 if building VxWorks. */
+/* #undef HAVE_VXWORKS */
+
+/* Define to 1 if you have the `yield' function. */
+/* #undef HAVE_YIELD */
+
+/* Define to 1 if you have the `_fstati64' function. */
+#define HAVE__FSTATI64 1
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "Berkeley DB"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "Berkeley DB 4.7.25"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "db-4.7.25"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.7.25"
+
+/* The size of a `char', as computed by sizeof. */
+/* #undef SIZEOF_CHAR */
+
+/* The size of a `char *', as computed by sizeof. */
+/* #undef SIZEOF_CHAR_P */
+
+/* The size of a `int', as computed by sizeof. */
+/* #undef SIZEOF_INT */
+
+/* The size of a `long', as computed by sizeof. */
+/* #undef SIZEOF_LONG */
+
+/* The size of a `long long', as computed by sizeof. */
+/* #undef SIZEOF_LONG_LONG */
+
+/* The size of a `short', as computed by sizeof. */
+/* #undef SIZEOF_SHORT */
+
+/* The size of a `size_t', as computed by sizeof. */
+/* #undef SIZEOF_SIZE_T */
+
+/* The size of a `unsigned char', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_CHAR */
+
+/* The size of a `unsigned int', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_INT */
+
+/* The size of a `unsigned long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG */
+
+/* The size of a `unsigned long long', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_LONG_LONG */
+
+/* The size of a `unsigned short', as computed by sizeof. */
+/* #undef SIZEOF_UNSIGNED_SHORT */
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+/* #undef TIME_WITH_SYS_TIME */
+
+/* Define to 1 to mask harmless uninitialized memory read/writes. */
+/* #undef UMRW */
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#define inline __inline
+#endif
+
+/* type to use in place of socklen_t if not defined */
+/* #undef socklen_t */

build_wince/db_int.h

@@ -0,0 +1,913 @@
+/* DO NOT EDIT: automatically built by dist/s_windows. */
+/*-
+ * See the file LICENSE for redistribution information.
+ *
+ * Copyright (c) 1996,2008 Oracle.  All rights reserved.
+ *
+ * $Id: db_int.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#ifndef _DB_INT_H_
+#define	_DB_INT_H_
+
+/*******************************************************
+ * Berkeley DB ANSI/POSIX include files.
+ *******************************************************/
+#ifdef HAVE_SYSTEM_INCLUDE_FILES
+#include <sys/types.h>
+#ifdef DIAG_MVCC
+#include <sys/mman.h>
+#endif
+#include <sys/stat.h>
+
+#if defined(__INCLUDE_SELECT_H)
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#ifdef HAVE_VXWORKS
+#include <selectLib.h>
+#endif
+#endif
+
+#if TIME_WITH_SYS_TIME
+#include <sys/time.h>
+#include <time.h>
+#else
+#if HAVE_SYS_TIME_H
+#include <sys/time.h>
+#else
+#include <time.h>
+#endif
+#endif
+
+#ifdef HAVE_VXWORKS
+#include <net/uio.h>
+#else
+#include <sys/uio.h>
+#endif
+
+#if defined(__INCLUDE_NETWORKING)
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#include <netinet/in.h>
+#include <netdb.h>
+#include <arpa/inet.h>
+#endif
+
+#if defined(STDC_HEADERS) || defined(__cplusplus)
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <signal.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#if defined(__INCLUDE_DIRECTORY)
+#if HAVE_DIRENT_H
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# if HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# if HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# if HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif
+#endif /* __INCLUDE_DIRECTORY */
+
+#endif /* !HAVE_SYSTEM_INCLUDE_FILES */
+
+#ifdef DB_WIN32
+#include "dbinc/win_db.h"
+#endif
+
+#include "db.h"
+#include "clib_port.h"
+
+#include "dbinc/queue.h"
+#include "dbinc/shqueue.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*******************************************************
+ * Forward structure declarations.
+ *******************************************************/
+struct __db_reginfo_t;	typedef struct __db_reginfo_t REGINFO;
+struct __db_txnhead;	typedef struct __db_txnhead DB_TXNHEAD;
+struct __db_txnlist;	typedef struct __db_txnlist DB_TXNLIST;
+struct __vrfy_childinfo;typedef struct __vrfy_childinfo VRFY_CHILDINFO;
+struct __vrfy_dbinfo;   typedef struct __vrfy_dbinfo VRFY_DBINFO;
+struct __vrfy_pageinfo; typedef struct __vrfy_pageinfo VRFY_PAGEINFO;
+
+typedef SH_TAILQ_HEAD(__hash_head) DB_HASHTAB;
+
+/*******************************************************
+ * General purpose constants and macros.
+ *******************************************************/
+#undef	FALSE
+#define	FALSE		0
+#undef	TRUE
+#define	TRUE		(!FALSE)
+
+#define	MEGABYTE	1048576
+#define	GIGABYTE	1073741824
+
+#define	NS_PER_MS	1000000		/* Nanoseconds in a millisecond */
+#define	NS_PER_US	1000		/* Nanoseconds in a microsecond */
+#define	NS_PER_SEC	1000000000	/* Nanoseconds in a second */
+#define	US_PER_MS	1000		/* Microseconds in a millisecond */
+#define	US_PER_SEC	1000000		/* Microseconds in a second */
+#define	MS_PER_SEC	1000		/* Milliseconds in a second */
+
+#define	RECNO_OOB	0		/* Illegal record number. */
+
+/* Test for a power-of-two (tests true for zero, which doesn't matter here). */
+#define	POWER_OF_TWO(x)	(((x) & ((x) - 1)) == 0)
+
+/* Test for valid page sizes. */
+#define	DB_MIN_PGSIZE	0x000200	/* Minimum page size (512). */
+#define	DB_MAX_PGSIZE	0x010000	/* Maximum page size (65536). */
+#define	IS_VALID_PAGESIZE(x)						\
+	(POWER_OF_TWO(x) && (x) >= DB_MIN_PGSIZE && ((x) <= DB_MAX_PGSIZE))
+
+/* Minimum number of pages cached, by default. */
+#define	DB_MINPAGECACHE	16
+
+/*
+ * If we are unable to determine the underlying filesystem block size, use
+ * 8K on the grounds that most OS's use less than 8K for a VM page size.
+ */
+#define	DB_DEF_IOSIZE	(8 * 1024)
+
+/* Align an integer to a specific boundary. */
+#undef	DB_ALIGN
+#define	DB_ALIGN(v, bound)						\
+	(((v) + (bound) - 1) & ~(((uintmax_t)(bound)) - 1))
+
+/* Increment a pointer to a specific boundary. */
+#undef	ALIGNP_INC
+#define	ALIGNP_INC(p, bound)						\
+	(void *)(((uintptr_t)(p) + (bound) - 1) & ~(((uintptr_t)(bound)) - 1))
+
+/*
+ * Print an address as a u_long (a u_long is the largest type we can print
+ * portably).  Most 64-bit systems have made longs 64-bits, so this should
+ * work.
+ */
+#define	P_TO_ULONG(p)	((u_long)(uintptr_t)(p))
+
+/*
+ * Convert a pointer to a small integral value.
+ *
+ * The (u_int16_t)(uintptr_t) cast avoids warnings: the (uintptr_t) cast
+ * converts the value to an integral type, and the (u_int16_t) cast converts
+ * it to a small integral type so we don't get complaints when we assign the
+ * final result to an integral type smaller than uintptr_t.
+ */
+#define	P_TO_UINT32(p)	((u_int32_t)(uintptr_t)(p))
+#define	P_TO_UINT16(p)	((u_int16_t)(uintptr_t)(p))
+
+/*
+ * There are several on-page structures that are declared to have a number of
+ * fields followed by a variable length array of items.  The structure size
+ * without including the variable length array or the address of the first of
+ * those elements can be found using SSZ.
+ *
+ * This macro can also be used to find the offset of a structure element in a
+ * structure.  This is used in various places to copy structure elements from
+ * unaligned memory references, e.g., pointers into a packed page.
+ *
+ * There are two versions because compilers object if you take the address of
+ * an array.
+ */
+#undef	SSZ
+#define	SSZ(name, field)  P_TO_UINT16(&(((name *)0)->field))
+
+#undef	SSZA
+#define	SSZA(name, field) P_TO_UINT16(&(((name *)0)->field[0]))
+
+/* Structure used to print flag values. */
+typedef struct __fn {
+	u_int32_t mask;			/* Flag value. */
+	const char *name;		/* Flag name. */
+} FN;
+
+/* Set, clear and test flags. */
+#define	FLD_CLR(fld, f)		(fld) &= ~(f)
+#define	FLD_ISSET(fld, f)	((fld) & (f))
+#define	FLD_SET(fld, f)		(fld) |= (f)
+#define	F_CLR(p, f)		(p)->flags &= ~(f)
+#define	F_ISSET(p, f)		((p)->flags & (f))
+#define	F_SET(p, f)		(p)->flags |= (f)
+#define	LF_CLR(f)		((flags) &= ~(f))
+#define	LF_ISSET(f)		((flags) & (f))
+#define	LF_SET(f)		((flags) |= (f))
+
+/*
+ * Calculate a percentage.  The values can overflow 32-bit integer arithmetic
+ * so we use floating point.
+ *
+ * When calculating a bytes-vs-page size percentage, we're getting the inverse
+ * of the percentage in all cases, that is, we want 100 minus the percentage we
+ * calculate.
+ */
+#define	DB_PCT(v, total)						\
+	((int)((total) == 0 ? 0 : ((double)(v) * 100) / (total)))
+#define	DB_PCT_PG(v, total, pgsize)					\
+	((int)((total) == 0 ? 0 :					\
+	    100 - ((double)(v) * 100) / (((double)total) * (pgsize))))
+
+/*
+ * Statistics update shared memory and so are expensive -- don't update the
+ * values unless we're going to display the results.
+ */
+#undef	STAT
+#ifdef	HAVE_STATISTICS
+#define	STAT(x)	x
+#else
+#define	STAT(x)
+#endif
+
+/*
+ * Structure used for callback message aggregation.
+ *
+ * Display values in XXX_stat_print calls.
+ */
+typedef struct __db_msgbuf {
+	char *buf;			/* Heap allocated buffer. */
+	char *cur;			/* Current end of message. */
+	size_t len;			/* Allocated length of buffer. */
+} DB_MSGBUF;
+#define	DB_MSGBUF_INIT(a) do {						\
+	(a)->buf = (a)->cur = NULL;					\
+	(a)->len = 0;							\
+} while (0)
+#define	DB_MSGBUF_FLUSH(env, a) do {					\
+	if ((a)->buf != NULL) {						\
+		if ((a)->cur != (a)->buf)				\
+			__db_msg(env, "%s", (a)->buf);		\
+		__os_free(env, (a)->buf);				\
+		DB_MSGBUF_INIT(a);					\
+	}								\
+} while (0)
+#define	STAT_FMT(msg, fmt, type, v) do {				\
+	DB_MSGBUF __mb;							\
+	DB_MSGBUF_INIT(&__mb);						\
+	__db_msgadd(env, &__mb, fmt, (type)(v));			\
+	__db_msgadd(env, &__mb, "\t%s", msg);				\
+	DB_MSGBUF_FLUSH(env, &__mb);					\
+} while (0)
+#define	STAT_HEX(msg, v)						\
+	__db_msg(env, "%#lx\t%s", (u_long)(v), msg)
+#define	STAT_ISSET(msg, p)						\
+	__db_msg(env, "%sSet\t%s", (p) == NULL ? "!" : " ", msg)
+#define	STAT_LONG(msg, v)						\
+	__db_msg(env, "%ld\t%s", (long)(v), msg)
+#define	STAT_LSN(msg, lsnp)						\
+	__db_msg(env, "%lu/%lu\t%s",					\
+	    (u_long)(lsnp)->file, (u_long)(lsnp)->offset, msg)
+#define	STAT_POINTER(msg, v)						\
+	__db_msg(env, "%#lx\t%s", P_TO_ULONG(v), msg)
+#define	STAT_STRING(msg, p) do {					\
+	const char *__p = p;	/* p may be a function call. */		\
+	__db_msg(env, "%s\t%s", __p == NULL ? "!Set" : __p, msg);	\
+} while (0)
+#define	STAT_ULONG(msg, v)						\
+	__db_msg(env, "%lu\t%s", (u_long)(v), msg)
+
+/*
+ * There are quite a few places in Berkeley DB where we want to initialize
+ * a DBT from a string or other random pointer type, using a length typed
+ * to size_t in most cases.  This macro avoids a lot of casting.  The macro
+ * comes in two flavors because we often want to clear the DBT first.
+ */
+#define	DB_SET_DBT(dbt, d, s)  do {					\
+	(dbt).data = (void *)(d);					\
+	(dbt).size = (u_int32_t)(s);					\
+} while (0)
+#define	DB_INIT_DBT(dbt, d, s)  do {					\
+	memset(&(dbt), 0, sizeof(dbt));					\
+	DB_SET_DBT(dbt, d, s);						\
+} while (0)
+
+/*******************************************************
+ * API return values
+ *******************************************************/
+/*
+ * Return values that are OK for each different call.  Most calls have a
+ * standard 'return of 0 is only OK value', but some, like db->get have
+ * DB_NOTFOUND as a return value, but it really isn't an error.
+ */
+#define	DB_RETOK_STD(ret)	((ret) == 0)
+#define	DB_RETOK_DBCDEL(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCGET(ret)	((ret) == 0 || (ret) == DB_KEYEMPTY || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBCPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST || \
+				    (ret) == DB_NOTFOUND)
+#define	DB_RETOK_DBDEL(ret)	DB_RETOK_DBCDEL(ret)
+#define	DB_RETOK_DBGET(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_DBPUT(ret)	((ret) == 0 || (ret) == DB_KEYEXIST)
+#define	DB_RETOK_EXISTS(ret)	DB_RETOK_DBCGET(ret)
+#define	DB_RETOK_LGGET(ret)	((ret) == 0 || (ret) == DB_NOTFOUND)
+#define	DB_RETOK_MPGET(ret)	((ret) == 0 || (ret) == DB_PAGE_NOTFOUND)
+#define	DB_RETOK_REPPMSG(ret)	((ret) == 0 || \
+				    (ret) == DB_REP_IGNORE || \
+				    (ret) == DB_REP_ISPERM || \
+				    (ret) == DB_REP_NEWMASTER || \
+				    (ret) == DB_REP_NEWSITE || \
+				    (ret) == DB_REP_NOTPERM)
+
+/* Find a reasonable operation-not-supported error. */
+#ifdef	EOPNOTSUPP
+#define	DB_OPNOTSUP	EOPNOTSUPP
+#else
+#ifdef	ENOTSUP
+#define	DB_OPNOTSUP	ENOTSUP
+#else
+#define	DB_OPNOTSUP	EINVAL
+#endif
+#endif
+
+/*******************************************************
+ * Files.
+ *******************************************************/
+/*
+ * We use 1024 as the maximum path length.  It's too hard to figure out what
+ * the real path length is, as it was traditionally stored in <sys/param.h>,
+ * and that file isn't always available.
+ */
+#define	DB_MAXPATHLEN	1024
+
+#define	PATH_DOT	"."	/* Current working directory. */
+				/* Path separator character(s). */
+#define	PATH_SEPARATOR	"\\/:"
+
+/*******************************************************
+ * Environment.
+ *******************************************************/
+/* Type passed to __db_appname(). */
+typedef enum {
+	DB_APP_NONE=0,			/* No type (region). */
+	DB_APP_DATA,			/* Data file. */
+	DB_APP_LOG,			/* Log file. */
+	DB_APP_TMP			/* Temporary file. */
+} APPNAME;
+
+/*
+ * A set of macros to check if various functionality has been configured.
+ *
+ * ALIVE_ON	The is_alive function is configured.
+ * CDB_LOCKING	CDB product locking.
+ * CRYPTO_ON	Security has been configured.
+ * LOCKING_ON	Locking has been configured.
+ * LOGGING_ON	Logging has been configured.
+ * MUTEX_ON	Mutexes have been configured.
+ * MPOOL_ON	Memory pool has been configured.
+ * REP_ON	Replication has been configured.
+ * RPC_ON	RPC has been configured.
+ * TXN_ON	Transactions have been configured.
+ *
+ * REP_ON is more complex than most: if the BDB library was compiled without
+ * replication support, ENV->rep_handle will be NULL; if the BDB library has
+ * replication support, but it was not configured, the region reference will
+ * be NULL.
+ */
+#define	ALIVE_ON(env)		((env)->dbenv->is_alive != NULL)
+#define	CDB_LOCKING(env)	F_ISSET(env, ENV_CDB)
+#define	CRYPTO_ON(env)		((env)->crypto_handle != NULL)
+#define	LOCKING_ON(env)		((env)->lk_handle != NULL)
+#define	LOGGING_ON(env)		((env)->lg_handle != NULL)
+#define	MPOOL_ON(env)		((env)->mp_handle != NULL)
+#define	MUTEX_ON(env)		((env)->mutex_handle != NULL)
+#define	REP_ON(env)							\
+	((env)->rep_handle != NULL && (env)->rep_handle->region != NULL)
+#define	RPC_ON(dbenv)		((dbenv)->cl_handle != NULL)
+#define	TXN_ON(env)		((env)->tx_handle != NULL)
+
+/*
+ * STD_LOCKING	Standard locking, that is, locking was configured and CDB
+ *		was not.  We do not do locking in off-page duplicate trees,
+ *		so we check for that in the cursor first.
+ */
+#define	STD_LOCKING(dbc)						\
+	(!F_ISSET(dbc, DBC_OPD) &&					\
+	    !CDB_LOCKING((dbc)->env) && LOCKING_ON((dbc)->env))
+
+/*
+ * IS_RECOVERING: The system is running recovery.
+ */
+#define	IS_RECOVERING(env)						\
+	(LOGGING_ON(env) && F_ISSET((env)->lg_handle, DBLOG_RECOVER))
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	ENV_ILLEGAL_AFTER_OPEN(env, name)				\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 1));
+#define	ENV_ILLEGAL_BEFORE_OPEN(env, name)				\
+	if (!F_ISSET((env), ENV_OPEN_CALLED))				\
+		return (__db_mi_open(env, name, 0));
+
+/* We're not actually user hostile, honest. */
+#define	ENV_REQUIRES_CONFIG(env, handle, i, flags)			\
+	if (handle == NULL)						\
+		return (__env_not_config(env, i, flags));
+#define	ENV_REQUIRES_CONFIG_XX(env, handle, i, flags)			\
+	if ((env)->handle->region == NULL)				\
+		return (__env_not_config(env, i, flags));
+#define	ENV_NOT_CONFIGURED(env, handle, i, flags)			\
+	if (F_ISSET((env), ENV_OPEN_CALLED))				\
+		ENV_REQUIRES_CONFIG(env, handle, i, flags)
+
+#define	ENV_ENTER(env, ip) do {						\
+	int __ret;							\
+	PANIC_CHECK(env);						\
+	if ((env)->thr_hashtab == NULL)					\
+		ip = NULL;						\
+	else {								\
+		if ((__ret =						\
+		    __env_set_state(env, &(ip), THREAD_ACTIVE)) != 0)	\
+			return (__ret);					\
+	}								\
+} while (0)
+
+#define ENV_GET_THREAD_INFO(env, ip) ENV_ENTER(env, ip)
+
+#ifdef DIAGNOSTIC
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL) {						\
+		DB_ASSERT(env, (ip)->dbth_state == THREAD_ACTIVE);	\
+		(ip)->dbth_state = THREAD_OUT;				\
+	}								\
+} while (0)
+#else
+#define	ENV_LEAVE(env, ip) do {						\
+	if ((ip) != NULL)						\
+		(ip)->dbth_state = THREAD_OUT;				\
+} while (0)
+#endif
+#ifdef DIAGNOSTIC
+#define	CHECK_THREAD(env) do {						\
+	if ((env)->thr_hashtab != NULL)					\
+		(void)__env_set_state(env, NULL, THREAD_VERIFY);	\
+} while (0)
+#ifdef HAVE_STATISTICS
+#define	CHECK_MTX_THREAD(env, mtx) do {					\
+	if (mtx->alloc_id != MTX_MUTEX_REGION &&			\
+	    mtx->alloc_id != MTX_ENV_REGION &&				\
+	    mtx->alloc_id != MTX_APPLICATION)				\
+		CHECK_THREAD(env);					\
+} while (0)
+#else
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+#else
+#define	CHECK_THREAD(env)
+#define	CHECK_MTX_THREAD(env, mtx)
+#endif
+
+typedef enum {
+	THREAD_SLOT_NOT_IN_USE=0,
+	THREAD_OUT,
+	THREAD_ACTIVE,
+	THREAD_BLOCKED,
+	THREAD_BLOCKED_DEAD
+#ifdef DIAGNOSTIC
+	, THREAD_VERIFY
+#endif
+} DB_THREAD_STATE;
+
+typedef struct __pin_list {
+	roff_t b_ref;		/* offset to buffer. */
+	int region;		/* region containing buffer. */
+} PIN_LIST;
+#define PINMAX 4
+
+struct __db_thread_info {
+	pid_t		dbth_pid;
+	db_threadid_t	dbth_tid;
+	DB_THREAD_STATE	dbth_state;
+	SH_TAILQ_ENTRY	dbth_links;
+	/*
+	 * The following fields track which buffers this thread of 
+	 * control has pinned in the mpool buffer cache.
+	 */
+	u_int16_t	dbth_pincount;	/* Number of pins for this thread. */
+	u_int16_t	dbth_pinmax;	/* Number of slots allocated. */
+	roff_t		dbth_pinlist;	/* List of pins. */
+	PIN_LIST	dbth_pinarray[PINMAX];	/* Initial array of slots. */
+};
+
+typedef struct __env_thread_info {
+	u_int32_t	thr_count;
+	u_int32_t	thr_max;
+	u_int32_t	thr_nbucket;
+	roff_t		thr_hashoff;
+} THREAD_INFO;
+
+#define	DB_EVENT(env, e, einfo) do {					\
+	DB_ENV *__dbenv = (env)->dbenv;					\
+	if (__dbenv->db_event_func != NULL)				\
+		__dbenv->db_event_func(__dbenv, e, einfo);		\
+} while (0)
+
+typedef struct __flag_map {
+	u_int32_t inflag, outflag;
+} FLAG_MAP;
+
+/*
+ * Internal database environment structure.
+ *
+ * This is the private database environment handle.  The public environment
+ * handle is the DB_ENV structure.   The library owns this structure, the user
+ * owns the DB_ENV structure.  The reason there are two structures is because
+ * the user's configuration outlives any particular DB_ENV->open call, and
+ * separate structures allows us to easily discard internal information without
+ * discarding the user's configuration.
+ */
+struct __env {
+	DB_ENV *dbenv;			/* Linked DB_ENV structure */
+
+	/*
+	 * The ENV structure can be used concurrently, so field access is
+	 * protected.
+	 */
+	db_mutex_t mtx_env;		/* ENV structure mutex */
+
+	/*
+	 * Some fields are included in the ENV structure rather than in the
+	 * DB_ENV structure because they are only set as arguments to the
+	 * DB_ENV->open method.  In other words, because of the historic API,
+	 * not for any rational reason.
+	 *
+	 * Arguments to DB_ENV->open.
+	 */
+	char	 *db_home;		/* Database home */
+	u_int32_t open_flags;		/* Flags */
+	int	  db_mode;		/* Default open permissions */
+
+	pid_t	pid_cache;		/* Cached process ID */
+
+	DB_FH	*lockfhp;		/* fcntl(2) locking file handle */
+
+	DB_LOCKER *env_lref;		/* Locker in non-threaded handles */
+
+	DB_DISTAB   recover_dtab;	/* Dispatch table for recover funcs */
+
+	int dir_mode;			/* Intermediate directory perms. */
+
+	/* Thread tracking */
+	u_int32_t	 thr_nbucket;	/* Number of hash buckets */
+	DB_HASHTAB	*thr_hashtab;	/* Hash table of DB_THREAD_INFO */
+
+	/* Mutex allocation */
+	struct {
+		int	  alloc_id;	/* Allocation ID argument */
+		u_int32_t flags;	/* Flags argument */
+	} *mutex_iq;			/* Initial mutexes queue */
+	u_int		mutex_iq_next;	/* Count of initial mutexes */
+	u_int		mutex_iq_max;	/* Maximum initial mutexes */
+
+	/*
+	 * List of open DB handles for this ENV, used for cursor
+	 * adjustment.  Must be protected for multi-threaded support.
+	 */
+	db_mutex_t mtx_dblist;
+	int	   db_ref;		/* DB handle reference count */
+	TAILQ_HEAD(__dblist, __db) dblist;
+
+	/*
+	 * XA support.
+	 */
+	int		 xa_rmid;		/* XA Resource Manager ID */
+	TAILQ_ENTRY(__env) links;		/* XA environments */
+	TAILQ_HEAD(__xa_txn, __db_txn) xa_txn;	/* XA active transactions */
+
+	/*
+	 * List of open file handles for this ENV.  Must be protected
+	 * for multi-threaded support.
+	 */
+	TAILQ_HEAD(__fdlist, __fh_t) fdlist;
+
+	db_mutex_t	 mtx_mt;	/* Mersenne Twister mutex */
+	int		 mti;		/* Mersenne Twister index */
+	u_long		*mt;		/* Mersenne Twister state vector */
+
+	DB_CIPHER	*crypto_handle;	/* Crypto handle */
+	DB_LOCKTAB	*lk_handle;	/* Lock handle */
+	DB_LOG		*lg_handle;	/* Log handle */
+	DB_MPOOL	*mp_handle;	/* Mpool handle */
+	DB_MUTEXMGR	*mutex_handle;	/* Mutex handle */
+	DB_REP		*rep_handle;	/* Replication handle */
+	DB_TXNMGR	*tx_handle;	/* Txn handle */
+
+	/* Application callback to copy data to/from a custom data source */
+#define	DB_USERCOPY_GETDATA	0x0001
+#define	DB_USERCOPY_SETDATA	0x0002
+	int (*dbt_usercopy)
+	    __P((DBT *, u_int32_t, void *, u_int32_t, u_int32_t));
+
+	REGINFO	*reginfo;		/* REGINFO structure reference */
+
+#define	DB_TEST_ELECTINIT	 1	/* after __rep_elect_init */
+#define	DB_TEST_ELECTVOTE1	 2	/* after sending VOTE1 */
+#define	DB_TEST_POSTDESTROY	 3	/* after destroy op */
+#define	DB_TEST_POSTLOG		 4	/* after logging all pages */
+#define	DB_TEST_POSTLOGMETA	 5	/* after logging meta in btree */
+#define	DB_TEST_POSTOPEN	 6	/* after __os_open */
+#define	DB_TEST_POSTSYNC	 7	/* after syncing the log */
+#define	DB_TEST_PREDESTROY	 8	/* before destroy op */
+#define	DB_TEST_PREOPEN		 9	/* before __os_open */
+#define	DB_TEST_SUBDB_LOCKS	 10	/* subdb locking tests */
+	int	test_abort;		/* Abort value for testing */
+	int	test_check;		/* Checkpoint value for testing */
+	int	test_copy;		/* Copy value for testing */
+
+#define	ENV_CDB			0x00000001 /* DB_INIT_CDB */
+#define	ENV_DBLOCAL		0x00000002 /* Environment for a private DB */
+#define	ENV_LITTLEENDIAN	0x00000004 /* Little endian system. */
+#define	ENV_LOCKDOWN		0x00000008 /* DB_LOCKDOWN set */
+#define	ENV_NO_OUTPUT_SET	0x00000010 /* No output channel set */
+#define	ENV_OPEN_CALLED		0x00000020 /* DB_ENV->open called */
+#define	ENV_PRIVATE		0x00000040 /* DB_PRIVATE set */
+#define	ENV_RECOVER_FATAL	0x00000080 /* Doing fatal recovery in env */
+#define	ENV_REF_COUNTED		0x00000100 /* Region references this handle */
+#define	ENV_SYSTEM_MEM		0x00000200 /* DB_SYSTEM_MEM set */
+#define	ENV_THREAD		0x00000400 /* DB_THREAD set */
+	u_int32_t flags;
+};
+
+/*******************************************************
+ * Database Access Methods.
+ *******************************************************/
+/*
+ * DB_IS_THREADED --
+ *	The database handle is free-threaded (was opened with DB_THREAD).
+ */
+#define	DB_IS_THREADED(dbp)						\
+	((dbp)->mutex != MUTEX_INVALID)
+
+/* Initialization methods are often illegal before/after open is called. */
+#define	DB_ILLEGAL_AFTER_OPEN(dbp, name)				\
+	if (F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 1));
+#define	DB_ILLEGAL_BEFORE_OPEN(dbp, name)				\
+	if (!F_ISSET((dbp), DB_AM_OPEN_CALLED))				\
+		return (__db_mi_open((dbp)->env, name, 0));
+/* Some initialization methods are illegal if environment isn't local. */
+#define	DB_ILLEGAL_IN_ENV(dbp, name)					\
+	if (!F_ISSET((dbp)->env, ENV_DBLOCAL))				\
+		return (__db_mi_env((dbp)->env, name));
+#define	DB_ILLEGAL_METHOD(dbp, flags) {					\
+	int __ret;							\
+	if ((__ret = __dbh_am_chk(dbp, flags)) != 0)			\
+		return (__ret);						\
+}
+
+/*
+ * Common DBC->internal fields.  Each access method adds additional fields
+ * to this list, but the initial fields are common.
+ */
+#define	__DBC_INTERNAL							\
+	DBC	 *opd;			/* Off-page duplicate cursor. */\
+									\
+	void	 *page;			/* Referenced page. */		\
+	db_pgno_t root;			/* Tree root. */		\
+	db_pgno_t pgno;			/* Referenced page number. */	\
+	db_indx_t indx;			/* Referenced key item index. */\
+									\
+	DB_LOCK		lock;		/* Cursor lock. */		\
+	db_lockmode_t	lock_mode;	/* Lock mode. */
+
+struct __dbc_internal {
+	__DBC_INTERNAL
+};
+
+/* Actions that __db_master_update can take. */
+typedef enum { MU_REMOVE, MU_RENAME, MU_OPEN } mu_action;
+
+/*
+ * Access-method-common macro for determining whether a cursor
+ * has been initialized.
+ */
+#define	IS_INITIALIZED(dbc)	((dbc)->internal->pgno != PGNO_INVALID)
+
+/* Free the callback-allocated buffer, if necessary, hanging off of a DBT. */
+#define	FREE_IF_NEEDED(env, dbt)					\
+	if (F_ISSET((dbt), DB_DBT_APPMALLOC)) {				\
+		__os_ufree((env), (dbt)->data);				\
+		F_CLR((dbt), DB_DBT_APPMALLOC);				\
+	}
+
+/*
+ * Use memory belonging to object "owner" to return the results of
+ * any no-DBT-flag get ops on cursor "dbc".
+ */
+#define	SET_RET_MEM(dbc, owner)				\
+	do {						\
+		(dbc)->rskey = &(owner)->my_rskey;	\
+		(dbc)->rkey = &(owner)->my_rkey;	\
+		(dbc)->rdata = &(owner)->my_rdata;	\
+	} while (0)
+
+/* Use the return-data memory src is currently set to use in dest as well. */
+#define	COPY_RET_MEM(src, dest)				\
+	do {						\
+		(dest)->rskey = (src)->rskey;		\
+		(dest)->rkey = (src)->rkey;		\
+		(dest)->rdata = (src)->rdata;		\
+	} while (0)
+
+/* Reset the returned-memory pointers to their defaults. */
+#define	RESET_RET_MEM(dbc)				\
+	do {						\
+		(dbc)->rskey = &(dbc)->my_rskey;	\
+		(dbc)->rkey = &(dbc)->my_rkey;		\
+		(dbc)->rdata = &(dbc)->my_rdata;	\
+	} while (0)
+
+/*******************************************************
+ * Mpool.
+ *******************************************************/
+/*
+ * File types for DB access methods.  Negative numbers are reserved to DB.
+ */
+#define	DB_FTYPE_SET		-1		/* Call pgin/pgout functions. */
+#define	DB_FTYPE_NOTSET		 0		/* Don't call... */
+#define	DB_LSN_OFF_NOTSET	-1		/* Not yet set. */
+#define	DB_CLEARLEN_NOTSET	UINT32_MAX	/* Not yet set. */
+
+/* Structure used as the DB pgin/pgout pgcookie. */
+typedef struct __dbpginfo {
+	size_t	db_pagesize;		/* Underlying page size. */
+	u_int32_t flags;		/* Some DB_AM flags needed. */
+	DBTYPE  type;			/* DB type */
+} DB_PGINFO;
+
+/*******************************************************
+ * Log.
+ *******************************************************/
+/* Initialize an LSN to 'zero'. */
+#define	ZERO_LSN(LSN) do {						\
+	(LSN).file = 0;							\
+	(LSN).offset = 0;						\
+} while (0)
+#define	IS_ZERO_LSN(LSN)	((LSN).file == 0 && (LSN).offset == 0)
+
+#define	IS_INIT_LSN(LSN)	((LSN).file == 1 && (LSN).offset == 0)
+#define	INIT_LSN(LSN)		do {					\
+	(LSN).file = 1;							\
+	(LSN).offset = 0;						\
+} while (0)
+
+#define	MAX_LSN(LSN) do {						\
+	(LSN).file = UINT32_MAX;					\
+	(LSN).offset = UINT32_MAX;					\
+} while (0)
+#define	IS_MAX_LSN(LSN) \
+	((LSN).file == UINT32_MAX && (LSN).offset == UINT32_MAX)
+
+/* If logging is turned off, smash the lsn. */
+#define	LSN_NOT_LOGGED(LSN) do {					\
+	(LSN).file = 0;							\
+	(LSN).offset = 1;						\
+} while (0)
+#define	IS_NOT_LOGGED_LSN(LSN) \
+	((LSN).file == 0 && (LSN).offset == 1)
+
+/*
+ * LOG_COMPARE -- compare two LSNs.
+ */
+
+#define	LOG_COMPARE(lsn0, lsn1)						\
+    ((lsn0)->file != (lsn1)->file ?					\
+    ((lsn0)->file < (lsn1)->file ? -1 : 1) :				\
+    ((lsn0)->offset != (lsn1)->offset ?					\
+    ((lsn0)->offset < (lsn1)->offset ? -1 : 1) : 0))
+
+/*******************************************************
+ * Txn.
+ *******************************************************/
+#define	DB_NONBLOCK(C)	((C)->txn != NULL && F_ISSET((C)->txn, TXN_NOWAIT))
+#define	NOWAIT_FLAG(txn) \
+	((txn) != NULL && F_ISSET((txn), TXN_NOWAIT) ? DB_LOCK_NOWAIT : 0)
+#define	IS_REAL_TXN(txn)						\
+	((txn) != NULL && !F_ISSET(txn, TXN_CDSGROUP))
+#define	IS_SUBTRANSACTION(txn)						\
+	((txn) != NULL && (txn)->parent != NULL)
+
+/*******************************************************
+ * Crypto.
+ *******************************************************/
+#define	DB_IV_BYTES     16		/* Bytes per IV */
+#define	DB_MAC_KEY	20		/* Bytes per MAC checksum */
+
+/*******************************************************
+ * Secondaries over RPC.
+ *******************************************************/
+#ifdef CONFIG_TEST
+/*
+ * These are flags passed to DB->associate calls by the Tcl API if running
+ * over RPC.  The RPC server will mask out these flags before making the real
+ * DB->associate call.
+ *
+ * These flags must coexist with the valid flags to DB->associate (currently
+ * DB_AUTO_COMMIT and DB_CREATE).  DB_AUTO_COMMIT is in the group of
+ * high-order shared flags (0xff000000), and DB_CREATE is in the low-order
+ * group (0x00000fff), so we pick a range in between.
+ */
+#define	DB_RPC2ND_MASK		0x00f00000 /* Reserved bits. */
+
+#define	DB_RPC2ND_REVERSEDATA	0x00100000 /* callback_n(0) _s_reversedata. */
+#define	DB_RPC2ND_NOOP		0x00200000 /* callback_n(1) _s_noop */
+#define	DB_RPC2ND_CONCATKEYDATA	0x00300000 /* callback_n(2) _s_concatkeydata */
+#define	DB_RPC2ND_CONCATDATAKEY 0x00400000 /* callback_n(3) _s_concatdatakey */
+#define	DB_RPC2ND_REVERSECONCAT	0x00500000 /* callback_n(4) _s_reverseconcat */
+#define	DB_RPC2ND_TRUNCDATA	0x00600000 /* callback_n(5) _s_truncdata */
+#define	DB_RPC2ND_CONSTANT	0x00700000 /* callback_n(6) _s_constant */
+#define	DB_RPC2ND_GETZIP	0x00800000 /* sj_getzip */
+#define	DB_RPC2ND_GETNAME	0x00900000 /* sj_getname */
+#endif
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*******************************************************
+ * Remaining general DB includes.
+ *******************************************************/
+
+
+#include "dbinc/globals.h"
+#include "dbinc/clock.h"
+#include "dbinc/debug.h"
+#include "dbinc/region.h"
+#include "dbinc_auto/env_ext.h"
+#include "dbinc/mutex.h"
+#ifdef HAVE_REPLICATION_THREADS
+#include "dbinc/repmgr.h"
+#endif
+#include "dbinc/rep.h"
+#include "dbinc/os.h"
+#include "dbinc_auto/clib_ext.h"
+#include "dbinc_auto/common_ext.h"
+
+/*******************************************************
+ * Remaining Log.
+ * These need to be defined after the general includes
+ * because they need rep.h from above.
+ *******************************************************/
+/*
+ * Test if the environment is currently logging changes.  If we're in recovery
+ * or we're a replication client, we don't need to log changes because they're
+ * already in the log, even though we have a fully functional log system.
+ */
+#define	DBENV_LOGGING(env)						\
+	(LOGGING_ON(env) && !IS_REP_CLIENT(env) && (!IS_RECOVERING(env)))
+
+/*
+ * Test if we need to log a change.  By default, we don't log operations without
+ * associated transactions, unless DIAGNOSTIC, DEBUG_ROP or DEBUG_WOP are on.
+ * This is because we want to get log records for read/write operations, and, if
+ * we are trying to debug something, more information is always better.
+ *
+ * The DBC_RECOVER flag is set when we're in abort, as well as during recovery;
+ * thus DBC_LOGGING may be false for a particular dbc even when DBENV_LOGGING
+ * is true.
+ *
+ * We explicitly use LOGGING_ON/IS_REP_CLIENT here because we don't want to pull
+ * in the log headers, which IS_RECOVERING (and thus DBENV_LOGGING) rely on, and
+ * because DBC_RECOVER should be set anytime IS_RECOVERING would be true.
+ *
+ * If we're not in recovery (master - doing an abort or a client applying
+ * a txn), then a client's only path through here is on an internal
+ * operation, and a master's only path through here is a transactional
+ * operation.  Detect if either is not the case.
+ */
+#if defined(DIAGNOSTIC) || defined(DEBUG_ROP)  || defined(DEBUG_WOP)
+#define	DBC_LOGGING(dbc)	__dbc_logging(dbc)
+#else
+#define	DBC_LOGGING(dbc)						\
+	((dbc)->txn != NULL && LOGGING_ON((dbc)->env) &&		\
+	    !F_ISSET((dbc), DBC_RECOVER) && !IS_REP_CLIENT((dbc)->env))
+#endif
+
+#endif /* !_DB_INT_H_ */

build_wince/db_small.vcp

@@ -0,0 +1,858 @@
+# Microsoft eMbedded Visual Tools Project File - Name="db_small" - Package Owner=<4>
+# Microsoft eMbedded Visual Tools Generated Build File, Format Version 6.02
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (WCE ARMV4) Static Library" 0xa304
+# TARGTYPE "Win32 (WCE emulator) Static Library" 0xa604
+
+CFG=db_small - Win32 (WCE emulator) Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "db_small.vcn".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "db_small.vcn" CFG="db_small - Win32 (WCE emulator) Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "db_small - Win32 (WCE emulator) Release" (based on "Win32 (WCE emulator) Static Library")
+!MESSAGE "db_small - Win32 (WCE emulator) Debug" (based on "Win32 (WCE emulator) Static Library")
+!MESSAGE "db_small - Win32 (WCE ARMV4) Release" (based on "Win32 (WCE ARMV4) Static Library")
+!MESSAGE "db_small - Win32 (WCE ARMV4) Debug" (based on "Win32 (WCE ARMV4) Static Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+# PROP ATL_Project 2
+
+!IF  "$(CFG)" == "db_small - Win32 (WCE emulator) Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release_EMU"
+# PROP BASE Intermediate_Dir "Release_EMU/db_small"
+# PROP BASE CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release_EMU"
+# PROP Intermediate_Dir "Release_EMU/db_small"
+# PROP CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "NDEBUG" /D "_LIB" /Yu"stdafx.h" /Gs8192 /D "HAVE_SMALLBUILD" /GF /O2 /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "NDEBUG" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /Gs8192 /D "HAVE_SMALLBUILD" /GF /O2 /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Release_EMU/libdb_small47s.lib"
+# ADD LIB32 /nologo /out:"Release_EMU/libdb_small47s.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ELSEIF  "$(CFG)" == "db_small - Win32 (WCE emulator) Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug_EMU"
+# PROP BASE Intermediate_Dir "Debug_EMU/db_small"
+# PROP BASE CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug_EMU"
+# PROP Intermediate_Dir "Debug_EMU/db_small"
+# PROP CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /W3 /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "_LIB" /Yu"stdafx.h" /Gs8192 /D "HAVE_SMALLBUILD" /GF /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /Gs8192 /D "HAVE_SMALLBUILD" /GF /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Debug_EMU/libdb_small47sd.lib"
+# ADD LIB32 /nologo /out:"Debug_EMU/libdb_small47sd.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ELSEIF  "$(CFG)" == "db_small - Win32 (WCE ARMV4) Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release_ARMV4"
+# PROP BASE Intermediate_Dir "Release_ARMV4/db_small"
+# PROP BASE CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release_ARMV4"
+# PROP Intermediate_Dir "Release_ARMV4/db_small"
+# PROP CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=clarm.exe
+# ADD BASE CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "NDEBUG" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /Yu"stdafx.h" /O2 /M$(CECrtMT) /D "HAVE_SMALLBUILD" /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "NDEBUG" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /O2 /M$(CECrtMT) /D "HAVE_SMALLBUILD" /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Release_ARMV4/libdb_small47s.lib"
+# ADD LIB32 /nologo /out:"Release_ARMV4/libdb_small47s.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ELSEIF  "$(CFG)" == "db_small - Win32 (WCE ARMV4) Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug_ARMV4"
+# PROP BASE Intermediate_Dir "Debug_ARMV4/db_small"
+# PROP BASE CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug_ARMV4"
+# PROP Intermediate_Dir "Debug_ARMV4/db_small"
+# PROP CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=clarm.exe
+# ADD BASE CPP /nologo /W3 /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /Yu"stdafx.h" /M$(CECrtMTDebug) /D "HAVE_SMALLBUILD" /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /M$(CECrtMTDebug) /D "HAVE_SMALLBUILD" /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Debug_ARMV4/libdb_small47sd.lib"
+# ADD LIB32 /nologo /out:"Debug_ARMV4/libdb_small47sd.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ENDIF 
+
+# Begin Target
+
+# Name "db_small - Win32 (WCE emulator) Release"
+# Name "db_small - Win32 (WCE emulator) Debug"
+# Name "db_small - Win32 (WCE ARMV4) Release"
+# Name "db_small - Win32 (WCE ARMV4) Debug"
+# Begin Source File
+
+SOURCE=..\btree\bt_compact.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_compare.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_conv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_curadj.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_cursor.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_delete.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_put.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_reclaim.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_recno.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_rsearch.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_search.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_split.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_upgrade.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_verify.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\btree_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\strdup.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\strerror.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\strsep.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\time.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\crypto_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_byteorder.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_err.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_getlong.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_idspace.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_log2.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_shash.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\dbt.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\mkpath.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\util_cache.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\util_log.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\zerofill.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\crdel_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\crdel_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_am.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_cam.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_cds.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_conv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_dispatch.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_dup.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_iface.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_join.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_meta.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_overflow.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_pr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_reclaim.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_remove.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_rename.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_ret.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_setid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_setlsn.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_stati.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_truncate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_upg.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_upg_opd.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_vrfy_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_config.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_file.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_globals.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_name.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_recover.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_register.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_sig.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fileops_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fop_basic.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fop_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fop_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_func.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hmac\hmac.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hmac\sha1.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_deadlock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_id.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_list.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_timer.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_archive.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_compare.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_debug.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_get.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_put.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_bh.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fget.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fmethod.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fopen.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fput.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fset.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_mvcc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_register.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_resize.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_sync.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_trickle.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_win32.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_abort.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_pid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_root.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_rpath.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_stack.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_tmpdir.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_uid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\ce_ctime.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_abs.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_clock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_config.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_cpu.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_dir.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_errno.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_fid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_flock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_fsync.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_getenv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_handle.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_map.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_mkdir.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_rename.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_rw.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_seek.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_truncate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_unlink.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_yield.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\rep\rep_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\repmgr\repmgr_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\sequence\seq_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\sequence\sequence.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_chkpt.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_recover.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\xa\xa.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\xa\xa_db.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\xa\xa_map.c
+# End Source File
+# End Target
+# End Project

build_wince/db_static.vcp

@@ -0,0 +1,966 @@
+# Microsoft eMbedded Visual Tools Project File - Name="db_static" - Package Owner=<4>
+# Microsoft eMbedded Visual Tools Generated Build File, Format Version 6.02
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (WCE ARMV4) Static Library" 0xa304
+# TARGTYPE "Win32 (WCE emulator) Static Library" 0xa604
+
+CFG=db_static - Win32 (WCE emulator) Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "db_static.vcn".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "db_static.vcn" CFG="db_static - Win32 (WCE emulator) Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "db_static - Win32 (WCE emulator) Release" (based on "Win32 (WCE emulator) Static Library")
+!MESSAGE "db_static - Win32 (WCE emulator) Debug" (based on "Win32 (WCE emulator) Static Library")
+!MESSAGE "db_static - Win32 (WCE ARMV4) Release" (based on "Win32 (WCE ARMV4) Static Library")
+!MESSAGE "db_static - Win32 (WCE ARMV4) Debug" (based on "Win32 (WCE ARMV4) Static Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+# PROP ATL_Project 2
+
+!IF  "$(CFG)" == "db_static - Win32 (WCE emulator) Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release_EMU"
+# PROP BASE Intermediate_Dir "Release_EMU/db_static"
+# PROP BASE CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release_EMU"
+# PROP Intermediate_Dir "Release_EMU/db_static"
+# PROP CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "NDEBUG" /D "_LIB" /Yu"stdafx.h" /Gs8192  /GF /O2 /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "NDEBUG" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /Gs8192  /GF /O2 /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Release_EMU/libdb47s.lib"
+# ADD LIB32 /nologo /out:"Release_EMU/libdb47s.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ELSEIF  "$(CFG)" == "db_static - Win32 (WCE emulator) Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug_EMU"
+# PROP BASE Intermediate_Dir "Debug_EMU/db_static"
+# PROP BASE CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug_EMU"
+# PROP Intermediate_Dir "Debug_EMU/db_static"
+# PROP CPU_ID "{32E52003-403E-442D-BE48-DE10F8C6131D}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /W3 /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "_LIB" /Yu"stdafx.h" /Gs8192  /GF /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "_i386_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_X86_" /D "x86" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /Gs8192  /GF /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Debug_EMU/libdb47sd.lib"
+# ADD LIB32 /nologo /out:"Debug_EMU/libdb47sd.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ELSEIF  "$(CFG)" == "db_static - Win32 (WCE ARMV4) Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release_ARMV4"
+# PROP BASE Intermediate_Dir "Release_ARMV4/db_static"
+# PROP BASE CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release_ARMV4"
+# PROP Intermediate_Dir "Release_ARMV4/db_static"
+# PROP CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=clarm.exe
+# ADD BASE CPP /nologo /W3 /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "NDEBUG" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /Yu"stdafx.h" /O2 /M$(CECrtMT)  /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "NDEBUG" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /O2 /M$(CECrtMT)  /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Release_ARMV4/libdb47s.lib"
+# ADD LIB32 /nologo /out:"Release_ARMV4/libdb47s.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ELSEIF  "$(CFG)" == "db_static - Win32 (WCE ARMV4) Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug_ARMV4"
+# PROP BASE Intermediate_Dir "Debug_ARMV4/db_static"
+# PROP BASE CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug_ARMV4"
+# PROP Intermediate_Dir "Debug_ARMV4/db_static"
+# PROP CPU_ID "{ECBEA43D-CD7B-4852-AD55-D4227B5D624B}"
+# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
+# PROP Target_Dir ""
+CPP=clarm.exe
+# ADD BASE CPP /nologo /W3 /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /Yu"stdafx.h" /M$(CECrtMTDebug)  /c
+# ADD CPP /nologo /W3 /I "." /I ".." /D "DB_WIN32" /D "DB_WINCE" /Zi /Od /D "DEBUG" /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "ARM" /D "_ARM_" /D "ARMV4" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_UNICODE" /D "_LIB" /D "__NO_SYSTEM_INCLUDES" /Yu"stdafx.h" /M$(CECrtMTDebug)  /c
+# SUBTRACT CPP /YX /Yc /Yu
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo /out:"Debug_ARMV4/libdb47sd.lib"
+# ADD LIB32 /nologo /out:"Debug_ARMV4/libdb47sd.lib"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+
+!ENDIF 
+
+# Begin Target
+
+# Name "db_static - Win32 (WCE emulator) Release"
+# Name "db_static - Win32 (WCE emulator) Debug"
+# Name "db_static - Win32 (WCE ARMV4) Release"
+# Name "db_static - Win32 (WCE ARMV4) Debug"
+# Begin Source File
+
+SOURCE=..\btree\bt_compact.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_compare.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_conv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_curadj.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_cursor.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_delete.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_put.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_reclaim.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_recno.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_rsearch.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_search.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_split.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_upgrade.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\bt_verify.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\btree\btree_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\strdup.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\strerror.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\strsep.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\clib\time.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_byteorder.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_err.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_getlong.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_idspace.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_log2.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\db_shash.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\dbt.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\mkpath.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\util_cache.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\util_log.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\common\zerofill.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\crypto\aes_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\crypto\crypto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\crypto\mersenne\mt19937db.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\crypto\rijndael\rijndael-alg-fst.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\crypto\rijndael\rijndael-api-fst.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\crdel_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\crdel_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_am.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_cam.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_cds.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_conv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_dispatch.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_dup.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_iface.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_join.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_meta.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_overflow.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_ovfl_vrfy.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_pr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_reclaim.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_remove.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_rename.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_ret.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_setid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_setlsn.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_stati.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_truncate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_upg.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_upg_opd.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_vrfy.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\db\db_vrfyutil.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\dbreg\dbreg_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_config.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_file.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_globals.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_name.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_recover.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_register.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_sig.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\env\env_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fileops_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fop_basic.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fop_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\fileops\fop_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_conv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_dup.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_func.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_meta.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_page.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_reclaim.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_upgrade.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hash\hash_verify.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hmac\hmac.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\hmac\sha1.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_deadlock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_id.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_list.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_timer.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\lock\lock_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_archive.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_compare.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_debug.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_get.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_put.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\log\log_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_bh.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fget.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fmethod.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fopen.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fput.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_fset.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_mvcc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_register.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_resize.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_sync.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mp\mp_trickle.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\mutex\mut_win32.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_abort.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_alloc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_pid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_root.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_rpath.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_stack.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_tmpdir.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os\os_uid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\ce_ctime.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_abs.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_clock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_config.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_cpu.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_dir.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_errno.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_fid.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_flock.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_fsync.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_getenv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_handle.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_map.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_mkdir.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_rename.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_rw.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_seek.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_truncate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_unlink.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\os_windows\os_yield.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_conv.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_files.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_open.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_upgrade.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\qam\qam_verify.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\rep\rep_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\repmgr\repmgr_stub.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\sequence\seq_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\sequence\sequence.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_auto.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_chkpt.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_failchk.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_method.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_rec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_recover.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_region.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_stat.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\txn\txn_util.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\xa\xa.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\xa\xa_db.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\xa\xa_map.c
+# End Source File
+# End Target
+# End Project

build_wince/errno.h

@@ -0,0 +1,188 @@
+/*-
+ * Copyright (c) 1982, 1986, 1989, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ * (c) UNIX System Laboratories, Inc.
+ * All or some portions of this file are derived from material licensed
+ * to the University of California by American Telephone and Telegraph
+ * Co. or Unix System Laboratories, Inc. and are reproduced herein with
+ * the permission of UNIX System Laboratories, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)errno.h	8.5 (Berkeley) 1/21/94
+ * FreeBSD: /repoman/r/ncvs/src/sys/sys/errno.h,v 1.28 2005/04/02 12:33:28 das Exp $
+ *
+ * $Id: errno.h 63573 2008-05-23 21:43:21Z trent.nelson $
+ */
+
+#ifndef _SYS_ERRNO_H_
+#define _SYS_ERRNO_H_
+
+#undef	errno
+#define	errno	DB_GLOBAL(db_errno)
+
+#define	EPERM		1		/* Operation not permitted */
+#define	ENOENT		2		/* No such file or directory */
+#define	ESRCH		3		/* No such process */
+#define	EINTR		4		/* Interrupted system call */
+#define	EIO		5		/* Input/output error */
+#define	ENXIO		6		/* Device not configured */
+#define	E2BIG		7		/* Argument list too long */
+#define	ENOEXEC		8		/* Exec format error */
+#define	EBADF		9		/* Bad file descriptor */
+#define	ECHILD		10		/* No child processes */
+#define	EDEADLK		11		/* Resource deadlock avoided */
+					/* 11 was EAGAIN */
+#define	ENOMEM		12		/* Cannot allocate memory */
+#define	EACCES		13		/* Permission denied */
+#define	EFAULT		14		/* Bad address */
+#ifndef _POSIX_SOURCE
+#define	ENOTBLK		15		/* Block device required */
+#endif
+#define	EBUSY		16		/* Device busy */
+#define	EEXIST		17		/* File exists */
+#define	EXDEV		18		/* Cross-device link */
+#define	ENODEV		19		/* Operation not supported by device */
+#define	ENOTDIR		20		/* Not a directory */
+#define	EISDIR		21		/* Is a directory */
+#define	EINVAL		22		/* Invalid argument */
+#define	ENFILE		23		/* Too many open files in system */
+#define	EMFILE		24		/* Too many open files */
+#define	ENOTTY		25		/* Inappropriate ioctl for device */
+#ifndef _POSIX_SOURCE
+#define	ETXTBSY		26		/* Text file busy */
+#endif
+#define	EFBIG		27		/* File too large */
+#define	ENOSPC		28		/* No space left on device */
+#define	ESPIPE		29		/* Illegal seek */
+#define	EROFS		30		/* Read-only filesystem */
+#define	EMLINK		31		/* Too many links */
+#define	EPIPE		32		/* Broken pipe */
+
+/* math software */
+#define	EDOM		33		/* Numerical argument out of domain */
+#define	ERANGE		34		/* Result too large */
+
+/* non-blocking and interrupt i/o */
+#define	EAGAIN		35		/* Resource temporarily unavailable */
+#ifndef _POSIX_SOURCE
+#define	EWOULDBLOCK	EAGAIN		/* Operation would block */
+#define	EINPROGRESS	36		/* Operation now in progress */
+
+#ifndef EALREADY			/* BREW already has an EALREADY. */
+#define	EALREADY	37		/* Operation already in progress */
+#endif
+
+/* ipc/network software -- argument errors */
+#define	ENOTSOCK	38		/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39		/* Destination address required */
+#define	EMSGSIZE	40		/* Message too long */
+#define	EPROTOTYPE	41		/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42		/* Protocol not available */
+#define	EPROTONOSUPPORT	43		/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44		/* Socket type not supported */
+#define	EOPNOTSUPP	45		/* Operation not supported */
+#define	ENOTSUP		EOPNOTSUPP	/* Operation not supported */
+#define	EPFNOSUPPORT	46		/* Protocol family not supported */
+#define	EAFNOSUPPORT	47		/* Address family not supported by protocol family */
+#define	EADDRINUSE	48		/* Address already in use */
+#define	EADDRNOTAVAIL	49		/* Can't assign requested address */
+
+/* ipc/network software -- operational errors */
+#define	ENETDOWN	50		/* Network is down */
+#define	ENETUNREACH	51		/* Network is unreachable */
+#define	ENETRESET	52		/* Network dropped connection on reset */
+#define	ECONNABORTED	53		/* Software caused connection abort */
+#define	ECONNRESET	54		/* Connection reset by peer */
+#define	ENOBUFS		55		/* No buffer space available */
+#define	EISCONN		56		/* Socket is already connected */
+#define	ENOTCONN	57		/* Socket is not connected */
+#define	ESHUTDOWN	58		/* Can't send after socket shutdown */
+#define	ETOOMANYREFS	59		/* Too many references: can't splice */
+#define	ETIMEDOUT	60		/* Operation timed out */
+#define	ECONNREFUSED	61		/* Connection refused */
+
+#define	ELOOP		62		/* Too many levels of symbolic links */
+#endif /* _POSIX_SOURCE */
+#define	ENAMETOOLONG	63		/* File name too long */
+
+/* should be rearranged */
+#ifndef _POSIX_SOURCE
+#define	EHOSTDOWN	64		/* Host is down */
+#define	EHOSTUNREACH	65		/* No route to host */
+#endif /* _POSIX_SOURCE */
+#define	ENOTEMPTY	66		/* Directory not empty */
+
+/* quotas & mush */
+#ifndef _POSIX_SOURCE
+#define	EPROCLIM	67		/* Too many processes */
+#define	EUSERS		68		/* Too many users */
+#define	EDQUOT		69		/* Disc quota exceeded */
+
+/* Network File System */
+#define	ESTALE		70		/* Stale NFS file handle */
+#define	EREMOTE		71		/* Too many levels of remote in path */
+#define	EBADRPC		72		/* RPC struct is bad */
+#define	ERPCMISMATCH	73		/* RPC version wrong */
+#define	EPROGUNAVAIL	74		/* RPC prog. not avail */
+#define	EPROGMISMATCH	75		/* Program version wrong */
+#define	EPROCUNAVAIL	76		/* Bad procedure for program */
+#endif /* _POSIX_SOURCE */
+
+#define	ENOLCK		77		/* No locks available */
+#define	ENOSYS		78		/* Function not implemented */
+
+#ifndef _POSIX_SOURCE
+#define	EFTYPE		79		/* Inappropriate file type or format */
+#define	EAUTH		80		/* Authentication error */
+#define	ENEEDAUTH	81		/* Need authenticator */
+#define	EIDRM		82		/* Identifier removed */
+#define	ENOMSG		83		/* No message of desired type */
+#define	EOVERFLOW	84		/* Value too large to be stored in data type */
+#define	ECANCELED	85		/* Operation canceled */
+#define	EILSEQ		86		/* Illegal byte sequence */
+#define	ENOATTR		87		/* Attribute not found */
+
+#define EDOOFUS		88		/* Programming error */
+#endif /* _POSIX_SOURCE */
+
+#define	EBADMSG		89		/* Bad message */
+#define	EMULTIHOP	90		/* Multihop attempted */
+#define	ENOLINK		91		/* Link has been severed */
+#define	EPROTO		92		/* Protocol error */
+
+#ifndef _POSIX_SOURCE
+#define	ELAST		92		/* Must be equal largest errno */
+#endif /* _POSIX_SOURCE */
+
+#ifdef _KERNEL
+/* pseudo-errors returned inside kernel to modify return to process */
+#define	ERESTART	(-1)		/* restart syscall */
+#define	EJUSTRETURN	(-2)		/* don't modify regs, just return */
+#define	ENOIOCTL	(-3)		/* ioctl not handled by this layer */
+#define	EDIRIOCTL	(-4)		/* do direct ioctl in GEOM */
+#endif
+
+#endif

build_wince/rsrcfile_vcproj.src

@@ -0,0 +1,40 @@
+		<File
+			RelativePath="@srcdir@\@srcfile@"
+			>
+			<FileConfiguration
+				Name="Release|Smartphone 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCResourceCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+			<FileConfiguration
+				Name="Release|Pocket PC 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCResourceCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+			<FileConfiguration
+				Name="Debug|Smartphone 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCResourceCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+			<FileConfiguration
+				Name="Debug|Pocket PC 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCResourceCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+		</File>

build_wince/srcfile_vcp.src

@@ -0,0 +1,4 @@
+# Begin Source File
+
+SOURCE=@srcdir@\@srcfile@
+# End Source File

build_wince/srcfile_vcproj.src

@@ -0,0 +1,40 @@
+		<File
+			RelativePath="@srcdir@\@srcfile@"
+			>
+			<FileConfiguration
+				Name="Release|Smartphone 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCCLCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+			<FileConfiguration
+				Name="Release|Pocket PC 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCCLCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+			<FileConfiguration
+				Name="Debug|Smartphone 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCCLCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+			<FileConfiguration
+				Name="Debug|Pocket PC 2003 (ARMV4)"
+				>
+				<Tool
+					Name="VCCLCompilerTool"
+					AdditionalIncludeDirectories=""
+					UsePrecompiledHeader="0"
+				/>
+			</FileConfiguration>
+		</File>